Updated CHANGELOG for 0.70.

This helps with handling error messages from unknown runtime
environments (e.g. moonscript).

LICENSE

@@ -136,43 +136,59 @@ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 
 SOFTWARE. 
 
---[[ LuaFileSystem License ]]----------------------------------------------
-
-LuaFileSystem was designed by Roberto Ierusalimschy, André Carregal and Tomás 
-Guisasola as part of the Kepler Project, which holds its copyright.
-Homepage: http://www.keplerproject.org/luafilesystem/index.html
-License:  http://www.keplerproject.org/luafilesystem/license.html
-
 --[[ LuaSockets License ]]-------------------------------------------------
 
 Copyright: © 2004-2006 Diego Nehab. All rights reserved.
 Homepage: http://www.cs.princeton.edu/~diego/professional/luasocket/
 License:  http://www.lua.org/copyright.html (same as LUA)
 
---[[ ZMQ License ]]--------------------------------------------------------
+--[[ Serpent License ]]----------------------------------------------------
 
-Copyright: © 2007-2011 iMatix Corporation and Contributors
-Homepage: http://www.zeromq.org/
-License:  http://www.zeromq.org/area:licensing
+Copyright (c) 2011-2013 Paul Kulchenko (paul@kulchenko.com)
 
-LuaZMQ
-Copyright: © 2011 by Robert G. Jakabosky
-Homepage: https://github.com/Neopallium/lua-zmq
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
 
---[[ MojoShader License ]]-------------------------------------------------
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
 
-Copyright: © 2008-2010 Ryan C. Gordon
-Homepage: http://icculus.org/mojoshader/
-License:  http://hg.icculus.org/icculus/mojoshader/raw-file/tip/LICENSE.txt
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
 
---[[ CLCC License ]]-------------------------------------------------------
+--[[ LuaJIT License ]]-----------------------------------------------------
 
-Copyright: © 2009 Organic Vectory B.V.
-Homepage: http://clcc.sourceforge.net/
-License:  boost
+Copyright © 2005-2013 Mike Pall, released under the MIT open source license.
 
-CLCC was modified by Christoph Kubisch to support multiple platforms and
-output file generation.
+--[[ WinAPI License ]]-----------------------------------------------------
+
+Copyright (C) 2011 Steve Donovan.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
 
 --[[ MobDebug License ]]---------------------------------------------------
 
@@ -197,3 +213,25 @@ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 THE SOFTWARE.
+
+--[[ RemDebug License ]]---------------------------------------------------
+
+Copyright (c) 2006 The Kepler Project.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

README.md

@@ -1,9 +1,20 @@
 # Project Description
 
-[ZeroBrane Studio](http://studio.zerobrane.com/) is a lightweight Lua IDE with code completion, syntax
-highlighting, remote debugger, code analyzer, live coding, and debugging
-support for several Lua engines (LuaJIT, Löve 2D, Moai, Gideros, MobileLua,
-and others).
+[ZeroBrane Studio](http://studio.zerobrane.com/) is a lightweight cross-platform Lua IDE with code completion,
+syntax highlighting, remote debugger, code analyzer, live coding,
+and debugging support for several Lua engines (LuaJIT,
+[Löve 2D](http://notebook.kulchenko.com/zerobrane/love2d-debugging),
+[Moai](http://notebook.kulchenko.com/zerobrane/moai-debugging-with-zerobrane-studio),
+[Gideros](http://notebook.kulchenko.com/zerobrane/gideros-debugging-with-zerobrane-studio-ide),
+[Corona](http://notebook.kulchenko.com/zerobrane/debugging-and-live-coding-with-corona-sdk-applications-and-zerobrane-studio),
+[Marmalade Quick](http://notebook.kulchenko.com/zerobrane/marmalade-quick-debugging-with-zerobrane-studio),
+[Cocos2d-x](http://notebook.kulchenko.com/zerobrane/cocos2d-x-simulator-and-on-device-debugging-with-zerobrane-studio),
+[GSL-shell](http://notebook.kulchenko.com/zerobrane/gsl-shell-debugging-with-zerobrane-studio),
+[Adobe Lightroom](http://notebook.kulchenko.com/zerobrane/debugging-lightroom-plugins-zerobrane-studio-ide),
+[OpenResty/Nginx](http://notebook.kulchenko.com/zerobrane/debugging-openresty-nginx-lua-scripts-with-zerobrane-studio)
+and others). It originated from the [Estrela Editor](http://www.luxinia.de/index.php/Estrela/).
+
+![ZeroBrane Studio debugger screenshot](http://studio.zerobrane.com/images/debugging.png)
 
 ## Features
 
@@ -11,33 +22,55 @@ and others).
 * Small, portable, and cross-platform (Windows, Mac OSX, and Linux).
 * Auto-completion for functions, keywords, and custom APIs.
 * Interactive console to directly test code snippets with local and remote execution.
-* Integrated debugger (with support for local and remote debugging).
-* Live coding with Lua ([demo](http://notebook.kulchenko.com/zerobrane/live-coding-in-lua-bret-victor-style)), Löve 2D ([demo](http://notebook.kulchenko.com/zerobrane/live-coding-with-love)), and Gideros ([demo](http://notebook.kulchenko.com/zerobrane/gideros-live-coding-with-zerobrane-studio-ide)).
-* Support for plugin-like components:
-  - applications: overall control of applications settings;
-  - specs (spec/): file syntax, lexer, keywords;
-  - apis (api/): for code-completion and tool-tips;
-  - interpreters (interpreters/): how a project is run;
-  - config (cfg/): contains style and basic editor settings;
-  - tools (tools/): additional tools.
+* Integrated debugger with local and [remote debugging](http://studio.zerobrane.com/doc-remote-debugging.html) for Lua 5.1,
+[Lua 5.2](http://studio.zerobrane.com/doc-lua52-debugging.html),
+[LuaJIT](http://studio.zerobrane.com/doc-luajit-debugging.html),
+and [other Lua engines](http://studio.zerobrane.com/documentation.html#debugging).
+* [Live coding](http://studio.zerobrane.com/documentation.html#live_coding)
+with [Lua](http://notebook.kulchenko.com/zerobrane/live-coding-in-lua-bret-victor-style),
+[Löve 2D](http://notebook.kulchenko.com/zerobrane/live-coding-with-love),
+[Gideros](http://notebook.kulchenko.com/zerobrane/gideros-live-coding-with-zerobrane-studio-ide),
+[Moai](http://notebook.kulchenko.com/zerobrane/live-coding-with-moai-and-zerobrane-studio),
+[Corona SDK](http://notebook.kulchenko.com/zerobrane/debugging-and-live-coding-with-corona-sdk-applications-and-zerobrane-studio),
+GSL-shell, and other engines.
+* Several ways to extend the current functionality:
+  - specs (`spec/`): specifications for file syntax, lexer, and keywords;
+  - apis (`api/`): descriptions for [code completion and tooltips](http://studio.zerobrane.com/doc-api-auto-complete.html);
+  - interpreters (`interpreters/`): components for setting debugging and run-time project environment;
+  - packages (`packages/`): [plugins](http://studio.zerobrane.com/doc-plugin.html) that provide additional functionality;
+  - config (`cfg/`): settings for styles, color themes, and other preferences;
+  - translations (`cfg/i18n/`): [translations](http://studio.zerobrane.com/doc-translation.html) of the menus and messages to other languages;
+  - tools (`tools/`): additional tools.
 
-## Screenshot
+## Documentation
 
-![ZeroBrane Studio debugger screenshot](http://studio.zerobrane.com/images/debugging.png)
+* A [short and simple overview](http://studio.zerobrane.com/doc-getting-started.html) for those who are new to this development environment.
+* A list of [frequently asked questions](http://studio.zerobrane.com/doc-faq.html) about the IDE.
+* [Tutorials and demos](http://studio.zerobrane.com/tutorials.html) that cover debugging and live coding for different environments.
+* [Tips and tricks](http://studio.zerobrane.com/doc-tips-and-tricks.html).
+
+## Installation
+
+ZeroBrane Studio can be installed into and run from any folder.
+No compilation is needed, although the scripts to compile required libraries for Windows, OSX, and Linux platforms are available in the `build/` folder.
 
 ## Usage
 
 ```
 Open file(s):
-  <zbstudio> <filename> [<filename>...]
-  any non-option will be treated as filename
+  zbstudio <filename> [<filename>...]
+  any non-option will be treated as a file to open or a directory to set as the project directory
+
+Set project directory:
+  zbstudio <project directory> [<filename>...]
+  (0.39+) a directory passed as a parameter will be set as the project directory
 
 Overriding default configuration:
-  <zbstudio> -cfg "<luacode overriding config>" [<filename>]
+  zbstudio -cfg "<luacode overriding config>" [<filename>]
   e.g.: zbstudio -cfg "editor.fontsize=12" somefile.lua
 
 Loading custom configuration:
-  <zbstudio> -cfg "config/file.lua" [<filename>]
+  zbstudio -cfg path/file.lua [<filename>]
   e.g.: zbstudio -cfg cfg/estrela.lua
 ```
 
@@ -51,6 +84,16 @@ Loading custom configuration:
 
   **Luxinia Dev:** Christoph Kubisch (crazybutcher@luxinia.de)
 
+## Where is Estrela?
+
+The projects have been merged and ZeroBrane Studio will lead the future.
+Please reassociate files with ZeroBrane Studio. To keep your history of files
+and projects copy the contents of the `EstrelaEditor.ini` in your HOME
+directory to `ZeroBraneStudio.ini`. If you have used Estrela for graphics
+shader authoring or luxinia, create/modify the `cfg/user.lua` to include the
+content of `cfg/estrela.lua` to load all tools and specifications by default
+again.
+  
 ## License
 
 See LICENSE file.

api/glsl/std.lua

@@ -64,6 +64,11 @@ smoothstep = fn "clip and smooth blend [a,b]. - (vecN)(vecN a, b, x)",
 floatBitsToInt = fn "returns the 32-bit integer representation of an IEEE 754 floating-point scalar or vector - (uintN/intN)(floatN)",
 intBitsToFloat = fn "returns the float value corresponding to a given bit represention.of a scalar int value or vector of int values. - (floatN)(intN)",
 uintBitsToFloat = fn "returns the float value corresponding to a given bit represention.of a scalar int value or vector of int values. - (floatN)(uintN)",
+doubleBitsToInt64 = fn "returns the 64-bit integer representation of an IEEE 754 double precision floating-point scalar or vector - (int64N)(doubleN)",
+doubleBitsToUint64 = fn "returns the 64-bit integer representation of an IEEE 754 double precision floating-point scalar or vector - (uint64N)(doubleN)",
+int64BitsToDouble =  fn "returns the double value corresponding to a given bit represention.of a scalar int value or vector of int values. - (doubleN)(uint64N)",
+uint64BitsToDouble =  fn "returns the double value corresponding to a given bit represention.of a scalar int value or vector of int values. - (doubleN)(uint64N)",
+
 fma = fn "return a*b + c, treated as single operation when using precise - (vecN a, vecN b, vecN c)",
 frexp = fn "splits scalars and vectors into normalized fraction [0.5,1.0) and a power of 2. - (vecN)(vecN x, out vecN e)",
 ldexp = fn "build floating point number from x and the corresponding integral exponen of 2 in exp. - (vecN)(vecN x, exp)",
@@ -73,12 +78,19 @@ packUnorm4x8 = fn "Converts each comp. of v into 8-bit ints, packs results into
 packSnorm4x8 = fn "Converts each comp. of v into 8-bit ints, packs results into the returned 32-bit uint. - (uint)(vec4 v)",
 packDouble2x32 = fn "Packs components of v into a 64-bit value and returns a double-prec value. - (double)(uvec2 v)",
 packHalf2x16 = fn "Converts each comp. of v into 16-bit half float, packs results into the returned 32-bit uint. - (uint)(vec2 v)",
+packInt2x32 = fn "Packs two 32 bit into one 64-bit value. - (int64_t)(ivec2)",
+packUint2x32 = fn "Packs two 32 bit into one 64-bit value. - (uint64_t)(uvec2)",
+packFloat2x16 = fn "returns an unsigned integer obtained by interpreting the components of a two-component 16-bit floating-point as integers and packing them into 32 bit. - (uint)(f16vec2  v)",
 
 unpackUnorm2x16 = fn "Unpacks 32-bit p into two 16-bit uints and converts them to normalized float. - (vec2)(uint p)",
 unpackUnorm4x8 = fn "Unpacks 32-bit p into four 8-bit uints and converts them to normalized float. - (vec4)(uint p)",
 unpackSnorm4x8 = fn "Unpacks 32-bit p into four 8-bit uints and converts them to normalized float. - (vec4)(uint p)",
 unpackDouble2x32 = fn "Returns a 2 component vector representation of v. - (uvec2)(double v)",
 unpackHalf2x16 = fn "Interprets p as two 16-bit half floats and returns them as vector. - (vec2)(uint p)",
+unpackInt2x32  = fn "Unpacks 64-bit into two 32-bit values. - (ivec2)(int64_t)",
+unpackUint2x32 = fn "Unpacks 64-bit into two 32-bit values. - (uvec2)(uint64_t)",
+unpackFloat2x16 = fn "returns a two-component vector with 16-bit floating-point components obtained by unpacking a 32-bit unsigned integer into a pair of 16-bit values. - (f16vec2)(uint)",
+
 
 length = fn "return scalar Euclidean length of a vector. - (type)(vecN)",
 distance = fn "return the Euclidean distance between two points. - (vecN)(vecN a, b)",
@@ -141,18 +153,31 @@ memoryBarrierShared = fn "control ordering of memory transactions issued by shad
 memoryBarrierBuffer = fn "control ordering of memory transactions issued by shader thread. - ()()",
 memoryBarrierImage = fn "control ordering of memory transactions issued by shader thread. - ()()",
 groupMemoryBarrier = fn "control ordering of memory transactions issued by shader thread. - ()()",
-imageAtomicAdd = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicMin = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicMax = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicIncWrap = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicDecWrap = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicAnd = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicOr = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicXor = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicExchange = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
-imageAtomicCompSwap = fn "performs atomic operation on individual texels returns new value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicAdd = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicMin = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicMax = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicIncWrap = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicDecWrap = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicAnd = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicOr = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicXor = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicExchange = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
+imageAtomicCompSwap = fn "performs atomic operation on individual texels returns old value. - (uint)(imageN, intN coord, [int sample], uint data)",
 imageStore = fn "stores the texel at the coordinate. - ()(imageN, intN coord, [int sample], vecN data)",
 imageLoad = fn "loads the texel at the coordinate. - (vecN)(imageN, intN coord, [int sample])",
+imageSize = fn "returns the size of the image. - (ivecN)(imageN)",
+
+atomicCounterIncrement = fn "increments counter and returns old value. - (uint)(atomic_uint)",
+atomicCounterDecrement = fn "decrements counter and returns old value. - (uint)(atomic_uint)",
+atomicCounter = fn "returns current counter value. - (uint)(atomic_uint)",
+atomicMin = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicMax = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicAdd = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicAnd = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicOr  = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicXor = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicExchange = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
+atomicCompSwap = fn "performs atomic operation on memory location (ssbo/shared) returns old value. - (uint)(inout uint mem, uint data)",
 
 textureSize = fn "returns the size of the texture (no lod required: Rect, MS and Buffer). - (intN)(samplerN, [int lod])",
 textureQueryLod = fn "returns the lod values for a given coordinate. - (vec2)(samplerN, vecN coord)",
@@ -170,6 +195,10 @@ textureGather = fn "gather lookup (pixel quad of 4 single channel samples at onc
 textureGatherOffset = fn "gather lookup (pixel quad of 4 single channel samples at once) with offset. Component 0: x, 1: y ... is ignored for shadow samplers instead reference value must be passed. Only 2D/Cube. Illegal for MS. - (vec4)(samplerN, vecN coord, [float shadowRefZ], intN offset / intN offset[4] , [int comp])",
 texelFetch = fn "integer coordinate lookup for a single texel. No lod parameter for Buffer, MS, Rect. Illegal for Cube - (vec4)(samplerN, intN coord, [int lod/sample])",
 texelFetchOffset = fn "integer coordinate lookup for a single texel with offset. No lod parameter for Buffer, MS, Rect. Illegal for Cube, Buffer, MS. - (vec4)(samplerN, intN coord, [int lod/sample], intN offset)",
+
+anyInvocationARB = fn "returns true if and only if <value> is true for at least one active invocation in the group. - (bool)(bool value)",
+allInvocationsARB = fn "returns true if and only if <value> is true for all active invocations in the group - (bool)(bool value)",
+allInvocationsEqualARB = fn "returns true if <value> is the same for all active invocation in the group. - (bool)(bool value)",
 }
 
 local keyw = 
@@ -178,6 +207,18 @@ local keyw =
     ivec2 ivec3 ivec4 uvec2 uvec3 uvec4 bvec2 bvec3 bvec4
     mat2 mat3 mat4 mat2x2 mat3x3 mat4x4 mat2x3 mat3x2 mat4x2 mat2x4 mat4x3 mat3x4
     dmat2 dmat3 dmat4 dmat2x2 dmat3x3 dmat4x4 dmat2x3 dmat3x2 dmat4x2 dmat2x4 dmat4x3 dmat3x4
+    float16_t f16vec2 f16vec3 f16vec4
+    float32_t f32vec2 f32vec3 f32vec4
+    float64_t f64vec2 f64vec3 f64vec4
+    int8_t i8vec2 i8vec3 i8vec4
+    int8_t i8vec2 i8vec3 i8vec4
+    int16_t i16vec2 i16vec3 i16vec4
+    int32_t i32vec2 i32vec3 i32vec4
+    int64_t i64vec2 i64vec3 i64vec4
+    uint8_t u8vec2 u8vec3 u8vec4
+    uint16_t u16vec2 u16vec3 u16vec4
+    uint32_t u32vec2 u32vec3 u32vec4
+    uint64_t u64vec2 u64vec3 u64vec4
     struct typedef void
     usampler1D usampler2D usampler3D usampler2DRect usamplerCube isampler1DArray usampler2DARRAY usamplerCubeArray usampler2DMS usampler2DMSArray
     isampler1D isampler2D isampler3D isampler2DRect isamplerCube isampler1DArray isampler2DARRAY isamplerCubeArray isampler2DMS isampler2DMSArray
@@ -189,7 +230,7 @@ local keyw =
     layout location vertices line_strip triangle_strip max_vertices stream
     triangles quads equal_spacing isolines fractional_even_spacing lines points
     fractional_odd_spacing cw ccw point_mode lines_adjacency triangles_adjacency
-    invocations
+    invocations offset align xfb_offset xfb_buffer
     origin_upper_left pixel_center_integer depth_greater depth_greater depth_greater depth_unchanged
     smooth flat noperspective highp mediump lowp shared packed std140 std430 row_major column_major buffer
     gl_FrontColor gl_BackColor gl_FrontSecondaryColor gl_BackSecondaryColor gl_Color gl_SecondaryColor
@@ -205,6 +246,8 @@ local keyw =
     gl_FragData gl_FragDepth gl_SampleMask
     gl_NumWorkGroups gl_WorkGroupSize gl_WorkGroupID gl_LocalInvocationID gl_GlobalInvocationID gl_LocalInvocationIndex
     local_size_x local_size_y local_size_z
+    gl_BaseVertexARB gl_BaseInstanceARB gl_DrawIDARB
+    bindless_sampler bound_sampler bindless_image bound_image early_fragment_tests
 
     coherent volatile restrict readonly writeonly
     image1D image2D image3D image2DRect imageCube imageBuffer image1DArray image2DArray imageCubeArray image2DMS image2DMSArray

api/hlsl/dx11.lua

@@ -0,0 +1,60 @@
+-- authors: Luxinia Dev (Eike Decker & Christoph Kubisch)
+---------------------------------------------------------
+
+local function fn (description) 
+	local description2,returns,args = description:match("(.+)%-%s*(%b())%s*(%b())")
+	if not description2 then
+		return {type="function",description=description,
+			returns="(?)"} 
+	end
+	return {type="function",description=description2,
+		returns=returns:gsub("^%s+",""):gsub("%s+$",""), args = args} 
+end
+
+local api = {}
+
+local funcs = [[
+abs acos all AllMemoryBarrier AllMemoryBarrierWithGroupSync any asdouble asfloat asin asint asuint atan atan2 ceil clamp clip cos cosh countbits cross ddx ddx_coarse ddx_fine ddy ddy_coards ddy_fine degrees determinant DeviceMemoryBarrier DeviceMemoryBarrierWithGroupSync distance dot dst EvaluateAttributeAtCentroid EvaluateAttributeAtSample EvaluateAttributeSnapped exp exp2 f16tof32 f32tof16 faceforward firstbithigh firstbitlow floor fmod frac frexp fwidth GetRenderTargetSampleCount GetRenderTargetSamplePosition GroupMemoryBarrier GroupMemoryBarrierWithGroupSync InterlockedAdd InterlockedAnd InterlockedCompareExchange InterlockedExchange InterlockedMax InterlockedMin IntterlockedOr InterlockedXor isfinite isinf isnan ldexp length lerp lit log log10 log2 mad max min modf mul normalize pow Process2DQuadTessFactorsAvg Process2DQuadTessFactorsMax Process2DQuadTessFactorsMin ProcessIsolineTessFactors ProcessQuadTessFactorsAvg ProcessQuadTessFactorsMax ProcessQuadTessFactorsMin ProcessTriTessFactorsAvg ProcessTriTessFactorsMax ProcessTriTessFactorsMin radians rcp reflect refract reversebits round rsqrt saturate sign sin sincos sinh smoothstep sqrt step tan tanh transpose trunc
+]]
+
+for w in funcs:gmatch("([_%w]+)") do
+	api[w] = {type="function",returns="(?)"}
+end
+
+local objfuncs = [[
+Append RestartStrip CalculateLevelOfDetail CalculateLevelOfDetailUnclamped GetDimensions GetSamplePosition Load Sample SampleBias SampleCmp SampleCmpLevelZero SampleGrad SampleLevel Load2 Load3 Load4 Consume Store Store2 Store3 Store4 DecrementCounter IncrementCounter mips Gather GatherRed GatherGreen GatherBlue GatherAlpha GatherCmp GatherCmpRed GatherCmpGreen GatherCmpBlue GatherCmpAlpha
+]]
+
+for w in objfuncs:gmatch("([_%w]+)") do
+	api[w] = {type="function",returns="(?)"}
+end
+
+local keyw = 
+[[break continue if else switch return for while do typedef namespace true false compile
+    const void struct static extern register volatile inline target nointerpolation shared uniform row_major column_major snorm unorm 
+    bool bool1 bool2 bool3 bool4 int int1 int2 int3 int4 uint uint1 uint2 uint3 uint4 half half1 half2 half3 half4 float float1 float2 float3 float4 double double1 double2 double3 double4
+    matrix bool1x1 bool1x2 bool1x3 bool1x4 bool2x1 bool2x2 bool2x3 bool2x4 bool3x1 bool3x2 bool3x3 bool3x4 bool4x1 bool4x2 bool4x3 bool4x4
+    int1x1 int1x2 int1x3 int1x4 int2x1 int2x2 int2x3 int2x4 int3x1 int3x2 int3x3 int3x4 int4x1 int4x2 int4x3 int4x4 uint1x1 uint1x2 uint1x3 uint1x4 
+    uint2x1 uint2x2 uint2x3 uint2x4 uint3x1 uint3x2 uint3x3 uint3x4 uint4x1 uint4x2 uint4x3 uint4x4 half1x1 half1x2 half1x3 half1x4 half2x1 half2x2 
+    half2x3 half2x4 half3x1 half3x2 half3x3 half3x4 half4x1 half4x2 half4x3 half4x4 float1x1 float1x2 float1x3 float1x4 float2x1 float2x2 float2x3
+    float2x4 float3x1 float3x2 float3x3 float3x4 float4x1 float4x2 float4x3 float4x4 double1x1 double1x2 double1x3 double1x4 double2x1 double2x2 
+    double2x3 double2x4 double3x1 double3x2 double3x3 double3x4 double4x1 double4x2 double4x3 double4x4 cbuffer groupshared SamplerState 
+    in out inout vector matrix interface class point triangle line lineadj triangleadj
+    
+    Texture Texture1D Texture1DArray Texture2D Texture2DArray Texture2DMS Texture2DMSArray Texture3D TextureCube RWTexture1D RWTexture1DArray RWTexture2D RWTexture2DArray RWTexture3D 
+    Buffer StructuredBuffer AppendStructuredBuffer ConsumeStructuredBuffer RWBuffer RWStructuredBuffer ByteAddressBuffer RWByteAddressBuffer PointStream TriangleStream LineStream InputPatch OutputPatch
+    unroll loop flatten branch earlydepthstencil allow_uav_condition domain instance maxtessfactor outputcontrolpoints outputtopology partitioning patchconstantfunc numthreads maxvertexcount precise
+    
+    SV_DispatchThreadID SV_DomainLocation SV_GroupID SV_GroupIndex SV_GroupThreadID SV_GSInstanceID SV_InsideTessFactor SV_OutputControlPointID SV_Coverage SV_Depth SV_Position SV_IsFrontFace SV_RenderTargetArrayIndex SV_SampleIndex SV_ViewportArrayIndex SV_InstanceID SV_PrimitiveID SV_VertexID    
+    SV_ClipDistance SV_CullDistance SV_Target
+
+]]
+
+-- keywords - shouldn't be left out
+for w in keyw:gmatch("([_%w]+)") do
+	api[w] = {type="keyword"}
+end
+
+return api
+
+

api/lua/cggl30.lua

@@ -1,572 +0,0 @@
---[[// cggl cgGL | Cg OpenGL runtime
-typedef unsigned int GLuint;
-typedef unsigned int GLenum;
-typedef void GLvoid;
-typedef int GLsizei;
-typedef int GLint;
-
-typedef enum
-{
-  CG_GL_MATRIX_IDENTITY             = 0,
-  CG_GL_MATRIX_TRANSPOSE            = 1,
-  CG_GL_MATRIX_INVERSE              = 2,
-  CG_GL_MATRIX_INVERSE_TRANSPOSE    = 3,
-  CG_GL_MODELVIEW_MATRIX            = 4,
-  CG_GL_PROJECTION_MATRIX           = 5,
-  CG_GL_TEXTURE_MATRIX              = 6,
-  CG_GL_MODELVIEW_PROJECTION_MATRIX = 7,
-  CG_GL_VERTEX                      = 8,
-  CG_GL_FRAGMENT                    = 9,
-  CG_GL_GEOMETRY                    = 10,
-  CG_GL_TESSELLATION_CONTROL        = 11,
-  CG_GL_TESSELLATION_EVALUATION     = 12
-} CGGLenum;
-
- CGbool  cgGLIsProfileSupported(CGprofile profile);
- void  cgGLEnableProfile(CGprofile profile);
- void  cgGLDisableProfile(CGprofile profile);
- CGprofile  cgGLGetLatestProfile(CGGLenum profile_type);
- void  cgGLSetOptimalOptions(CGprofile profile);
- char const **  cgGLGetOptimalOptions(CGprofile profile);
- void  cgGLLoadProgram(CGprogram program);
- void  cgGLUnloadProgram(CGprogram program);
- CGbool  cgGLIsProgramLoaded(CGprogram program);
- void  cgGLBindProgram(CGprogram program);
- void  cgGLUnbindProgram(CGprofile profile);
- GLuint  cgGLGetProgramID(CGprogram program);
- void  cgGLSetParameter1f(CGparameter param, float x);
- void  cgGLSetParameter2f(CGparameter param, float x, float y);
- void  cgGLSetParameter3f(CGparameter param, float x, float y, float z);
- void  cgGLSetParameter4f(CGparameter param, float x, float y, float z, float w);
- void  cgGLSetParameter1fv(CGparameter param, const float *v);
- void  cgGLSetParameter2fv(CGparameter param, const float *v);
- void  cgGLSetParameter3fv(CGparameter param, const float *v);
- void  cgGLSetParameter4fv(CGparameter param, const float *v);
- void  cgGLSetParameter1d(CGparameter param, double x);
- void  cgGLSetParameter2d(CGparameter param, double x, double y);
- void  cgGLSetParameter3d(CGparameter param, double x, double y, double z);
- void  cgGLSetParameter4d(CGparameter param, double x, double y, double z, double w);
- void  cgGLSetParameter1dv(CGparameter param, const double *v);
- void  cgGLSetParameter2dv(CGparameter param, const double *v);
- void  cgGLSetParameter3dv(CGparameter param, const double *v);
- void  cgGLSetParameter4dv(CGparameter param, const double *v);
- void  cgGLGetParameter1f(CGparameter param, float *v);
- void  cgGLGetParameter2f(CGparameter param, float *v);
- void  cgGLGetParameter3f(CGparameter param, float *v);
- void  cgGLGetParameter4f(CGparameter param, float *v);
- void  cgGLGetParameter1d(CGparameter param, double *v);
- void  cgGLGetParameter2d(CGparameter param, double *v);
- void  cgGLGetParameter3d(CGparameter param, double *v);
- void  cgGLGetParameter4d(CGparameter param, double *v);
- void  cgGLSetParameterArray1f(CGparameter param, long offset, long nelements, const float *v);
- void  cgGLSetParameterArray2f(CGparameter param, long offset, long nelements, const float *v);
- void  cgGLSetParameterArray3f(CGparameter param, long offset, long nelements, const float *v);
- void  cgGLSetParameterArray4f(CGparameter param, long offset, long nelements, const float *v);
- void  cgGLSetParameterArray1d(CGparameter param, long offset, long nelements, const double *v);
- void  cgGLSetParameterArray2d(CGparameter param, long offset, long nelements, const double *v);
- void  cgGLSetParameterArray3d(CGparameter param, long offset, long nelements, const double *v);
- void  cgGLSetParameterArray4d(CGparameter param, long offset, long nelements, const double *v);
- void  cgGLGetParameterArray1f(CGparameter param, long offset, long nelements, float *v);
- void  cgGLGetParameterArray2f(CGparameter param, long offset, long nelements, float *v);
- void  cgGLGetParameterArray3f(CGparameter param, long offset, long nelements, float *v);
- void  cgGLGetParameterArray4f(CGparameter param, long offset, long nelements, float *v);
- void  cgGLGetParameterArray1d(CGparameter param, long offset, long nelements, double *v);
- void  cgGLGetParameterArray2d(CGparameter param, long offset, long nelements, double *v);
- void  cgGLGetParameterArray3d(CGparameter param, long offset, long nelements, double *v);
- void  cgGLGetParameterArray4d(CGparameter param, long offset, long nelements, double *v);
- void  cgGLSetParameterPointer(CGparameter param, GLint fsize, GLenum type, GLsizei stride, const GLvoid *pointer);
- void  cgGLEnableClientState(CGparameter param);
- void  cgGLDisableClientState(CGparameter param);
- void  cgGLSetMatrixParameterdr(CGparameter param, const double *matrix);
- void  cgGLSetMatrixParameterfr(CGparameter param, const float *matrix);
- void  cgGLSetMatrixParameterdc(CGparameter param, const double *matrix);
- void  cgGLSetMatrixParameterfc(CGparameter param, const float *matrix);
- void  cgGLGetMatrixParameterdr(CGparameter param, double *matrix);
- void  cgGLGetMatrixParameterfr(CGparameter param, float *matrix);
- void  cgGLGetMatrixParameterdc(CGparameter param, double *matrix);
- void  cgGLGetMatrixParameterfc(CGparameter param, float *matrix);
- void  cgGLSetStateMatrixParameter(CGparameter param, CGGLenum matrix, CGGLenum transform);
- void  cgGLSetMatrixParameterArrayfc(CGparameter param, long offset, long nelements, const float *matrices);
- void  cgGLSetMatrixParameterArrayfr(CGparameter param, long offset, long nelements, const float *matrices);
- void  cgGLSetMatrixParameterArraydc(CGparameter param, long offset, long nelements, const double *matrices);
- void  cgGLSetMatrixParameterArraydr(CGparameter param, long offset, long nelements, const double *matrices);
- void  cgGLGetMatrixParameterArrayfc(CGparameter param, long offset, long nelements, float *matrices);
- void  cgGLGetMatrixParameterArrayfr(CGparameter param, long offset, long nelements, float *matrices);
- void  cgGLGetMatrixParameterArraydc(CGparameter param, long offset, long nelements, double *matrices);
- void  cgGLGetMatrixParameterArraydr(CGparameter param, long offset, long nelements, double *matrices);
- void  cgGLSetTextureParameter(CGparameter param, GLuint texobj);
- GLuint  cgGLGetTextureParameter(CGparameter param);
- void  cgGLEnableTextureParameter(CGparameter param);
- void  cgGLDisableTextureParameter(CGparameter param);
- GLenum  cgGLGetTextureEnum(CGparameter param);
- void  cgGLSetManageTextureParameters(CGcontext ctx, CGbool flag);
- CGbool  cgGLGetManageTextureParameters(CGcontext ctx);
- void  cgGLSetupSampler(CGparameter param, GLuint texobj);
- void  cgGLRegisterStates(CGcontext ctx);
- void  cgGLEnableProgramProfiles(CGprogram program);
- void  cgGLDisableProgramProfiles(CGprogram program);
- void  cgGLSetDebugMode(CGbool debug);
- CGbuffer  cgGLCreateBuffer(CGcontext context, int size, const void *data, GLenum bufferUsage);
- GLuint  cgGLGetBufferObject(CGbuffer buffer);
-
-]]  
---auto-generated api from ffi headers
-local api =
-  {
-  ["CGGLenum"] = { type ='value', description = "", valuetype = nil, },
-  ["CG_GL_MATRIX_IDENTITY"] = { type ='value', },
-  ["CG_GL_MATRIX_TRANSPOSE"] = { type ='value', },
-  ["CG_GL_MATRIX_INVERSE"] = { type ='value', },
-  ["CG_GL_MATRIX_INVERSE_TRANSPOSE"] = { type ='value', },
-  ["CG_GL_MODELVIEW_MATRIX"] = { type ='value', },
-  ["CG_GL_PROJECTION_MATRIX"] = { type ='value', },
-  ["CG_GL_TEXTURE_MATRIX"] = { type ='value', },
-  ["CG_GL_MODELVIEW_PROJECTION_MATRIX"] = { type ='value', },
-  ["CG_GL_VERTEX"] = { type ='value', },
-  ["CG_GL_FRAGMENT"] = { type ='value', },
-  ["CG_GL_GEOMETRY"] = { type ='value', },
-  ["CG_GL_TESSELLATION_CONTROL"] = { type ='value', },
-  ["CG_GL_TESSELLATION_EVALUATION"] = { type ='value', },
-  ["cgGLIsProfileSupported"] = { type ='function', 
-    description = "", 
-    returns = "(CGbool)",
-    valuetype = nil,
-    args = "(CGprofile profile)", },
-  ["cgGLEnableProfile"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprofile profile)", },
-  ["cgGLDisableProfile"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprofile profile)", },
-  ["cgGLGetLatestProfile"] = { type ='function', 
-    description = "", 
-    returns = "(CGprofile)",
-    valuetype = nil,
-    args = "(CGGLenum profile_type)", },
-  ["cgGLSetOptimalOptions"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprofile profile)", },
-  ["cgGLGetOptimalOptions"] = { type ='function', 
-    description = "", 
-    returns = "(char const **)",
-    valuetype = nil,
-    args = "(CGprofile profile)", },
-  ["cgGLLoadProgram"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLUnloadProgram"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLIsProgramLoaded"] = { type ='function', 
-    description = "", 
-    returns = "(CGbool)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLBindProgram"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLUnbindProgram"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprofile profile)", },
-  ["cgGLGetProgramID"] = { type ='function', 
-    description = "", 
-    returns = "(GLuint)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLSetParameter1f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float x)", },
-  ["cgGLSetParameter2f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float x, float y)", },
-  ["cgGLSetParameter3f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float x, float y, float z)", },
-  ["cgGLSetParameter4f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float x, float y, float z, float w)", },
-  ["cgGLSetParameter1fv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const float *v)", },
-  ["cgGLSetParameter2fv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const float *v)", },
-  ["cgGLSetParameter3fv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const float *v)", },
-  ["cgGLSetParameter4fv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const float *v)", },
-  ["cgGLSetParameter1d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double x)", },
-  ["cgGLSetParameter2d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double x, double y)", },
-  ["cgGLSetParameter3d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double x, double y, double z)", },
-  ["cgGLSetParameter4d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double x, double y, double z, double w)", },
-  ["cgGLSetParameter1dv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const double *v)", },
-  ["cgGLSetParameter2dv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const double *v)", },
-  ["cgGLSetParameter3dv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const double *v)", },
-  ["cgGLSetParameter4dv"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const double *v)", },
-  ["cgGLGetParameter1f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float *v)", },
-  ["cgGLGetParameter2f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float *v)", },
-  ["cgGLGetParameter3f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float *v)", },
-  ["cgGLGetParameter4f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float *v)", },
-  ["cgGLGetParameter1d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double *v)", },
-  ["cgGLGetParameter2d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double *v)", },
-  ["cgGLGetParameter3d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double *v)", },
-  ["cgGLGetParameter4d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double *v)", },
-  ["cgGLSetParameterArray1f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const float *v)", },
-  ["cgGLSetParameterArray2f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const float *v)", },
-  ["cgGLSetParameterArray3f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const float *v)", },
-  ["cgGLSetParameterArray4f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const float *v)", },
-  ["cgGLSetParameterArray1d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const double *v)", },
-  ["cgGLSetParameterArray2d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const double *v)", },
-  ["cgGLSetParameterArray3d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const double *v)", },
-  ["cgGLSetParameterArray4d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const double *v)", },
-  ["cgGLGetParameterArray1f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, float *v)", },
-  ["cgGLGetParameterArray2f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, float *v)", },
-  ["cgGLGetParameterArray3f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, float *v)", },
-  ["cgGLGetParameterArray4f"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, float *v)", },
-  ["cgGLGetParameterArray1d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, double *v)", },
-  ["cgGLGetParameterArray2d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, double *v)", },
-  ["cgGLGetParameterArray3d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, double *v)", },
-  ["cgGLGetParameterArray4d"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, double *v)", },
-  ["cgGLSetParameterPointer"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, GLint fsize, GLenum type, GLsizei stride, const GLvoid *pointer)", },
-  ["cgGLEnableClientState"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param)", },
-  ["cgGLDisableClientState"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param)", },
-  ["cgGLSetMatrixParameterdr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const double *matrix)", },
-  ["cgGLSetMatrixParameterfr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const float *matrix)", },
-  ["cgGLSetMatrixParameterdc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const double *matrix)", },
-  ["cgGLSetMatrixParameterfc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, const float *matrix)", },
-  ["cgGLGetMatrixParameterdr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double *matrix)", },
-  ["cgGLGetMatrixParameterfr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float *matrix)", },
-  ["cgGLGetMatrixParameterdc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, double *matrix)", },
-  ["cgGLGetMatrixParameterfc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, float *matrix)", },
-  ["cgGLSetStateMatrixParameter"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, CGGLenum matrix, CGGLenum transform)", },
-  ["cgGLSetMatrixParameterArrayfc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const float *matrices)", },
-  ["cgGLSetMatrixParameterArrayfr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const float *matrices)", },
-  ["cgGLSetMatrixParameterArraydc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const double *matrices)", },
-  ["cgGLSetMatrixParameterArraydr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, const double *matrices)", },
-  ["cgGLGetMatrixParameterArrayfc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, float *matrices)", },
-  ["cgGLGetMatrixParameterArrayfr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, float *matrices)", },
-  ["cgGLGetMatrixParameterArraydc"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, double *matrices)", },
-  ["cgGLGetMatrixParameterArraydr"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, long offset, long nelements, double *matrices)", },
-  ["cgGLSetTextureParameter"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, GLuint texobj)", },
-  ["cgGLGetTextureParameter"] = { type ='function', 
-    description = "", 
-    returns = "(GLuint)",
-    valuetype = nil,
-    args = "(CGparameter param)", },
-  ["cgGLEnableTextureParameter"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param)", },
-  ["cgGLDisableTextureParameter"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param)", },
-  ["cgGLGetTextureEnum"] = { type ='function', 
-    description = "", 
-    returns = "(GLenum)",
-    valuetype = nil,
-    args = "(CGparameter param)", },
-  ["cgGLSetManageTextureParameters"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGcontext ctx, CGbool flag)", },
-  ["cgGLGetManageTextureParameters"] = { type ='function', 
-    description = "", 
-    returns = "(CGbool)",
-    valuetype = nil,
-    args = "(CGcontext ctx)", },
-  ["cgGLSetupSampler"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGparameter param, GLuint texobj)", },
-  ["cgGLRegisterStates"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGcontext ctx)", },
-  ["cgGLEnableProgramProfiles"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLDisableProgramProfiles"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGprogram program)", },
-  ["cgGLSetDebugMode"] = { type ='function', 
-    description = "", 
-    returns = "(void)",
-    valuetype = nil,
-    args = "(CGbool debug)", },
-  ["cgGLCreateBuffer"] = { type ='function', 
-    description = "", 
-    returns = "(CGbuffer)",
-    valuetype = nil,
-    args = "(CGcontext context, int size, const void *data, GLenum bufferUsage)", },
-  ["cgGLGetBufferObject"] = { type ='function', 
-    description = "", 
-    returns = "(GLuint)",
-    valuetype = nil,
-    args = "(CGbuffer buffer)", },
-  }
-return {
-  cggl = {
-    type = 'lib',
-    description = "Cg OpenGL runtime",
-    childs = api,
-  },
-  cgGL = {
-    type = 'lib',
-    description = "Cg OpenGL runtime",
-    childs = api,
-  },
-}

api/lua/cudagl32.lua

@@ -1,79 +0,0 @@
---[[// cugl cuGL | Cuda GL Interop
-/*
- * Copyright 1993-2010 NVIDIA Corporation.  All rights reserved.
- *
- * NOTICE TO USER:   
- *
- * This source code is subject to NVIDIA ownership rights under U.S. and 
- * international Copyright laws.  Users and possessors of this source code 
- * are hereby granted a nonexclusive, royalty-free license to use this code 
- * in individual and commercial software.
- *
- * NVIDIA MAKES NO REPRESENTATION ABOUT THE SUITABILITY OF THIS SOURCE 
- * CODE FOR ANY PURPOSE.  IT IS PROVIDED "AS IS" WITHOUT EXPRESS OR 
- * IMPLIED WARRANTY OF ANY KIND.  NVIDIA DISCLAIMS ALL WARRANTIES WITH 
- * REGARD TO THIS SOURCE CODE, INCLUDING ALL IMPLIED WARRANTIES OF 
- * MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.
- * IN NO EVENT SHALL NVIDIA BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, 
- * OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS 
- * OF USE, DATA OR PROFITS,  WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE 
- * OR OTHER TORTIOUS ACTION,  ARISING OUT OF OR IN CONNECTION WITH THE USE 
- * OR PERFORMANCE OF THIS SOURCE CODE.  
- *
- * U.S. Government End Users.   This source code is a "commercial item" as 
- * that term is defined at  48 C.F.R. 2.101 (OCT 1995), consisting  of 
- * "commercial computer  software"  and "commercial computer software 
- * documentation" as such terms are  used in 48 C.F.R. 12.212 (SEPT 1995) 
- * and is provided to the U.S. Government only as a commercial end item.  
- * Consistent with 48 C.F.R.12.212 and 48 C.F.R. 227.7202-1 through 
- * 227.7202-4 (JUNE 1995), all U.S. Government End Users acquire the 
- * source code with only those rights set forth herein. 
- *
- * Any use of this source code in individual and commercial software must 
- * include, in the user documentation and internal comments to the code,
- * the above Disclaimer and U.S. Government End Users Notice.
- */
-
-CUresult cuGLCtxCreate_v2(CUcontext *pCtx, unsigned int Flags, CUdevice device );
-CUresult cuGraphicsGLRegisterBuffer(CUgraphicsResource *pCudaResource, GLuint buffer, unsigned int Flags);
-CUresult cuGraphicsGLRegisterImage(CUgraphicsResource *pCudaResource, GLuint image, GLenum target, unsigned int Flags);
-
-typedef void* HGPUNV;
-CUresult cuWGLGetDevice(CUdevice *pDevice, HGPUNV hGpu);
-]]  
---auto-generated api from ffi headers
-local api =
-  {
-  ["cuGLCtxCreate_v2"] = { type ='function', 
-    description = "", 
-    returns = "(CUresult)",
-    valuetype = nil,
-    args = "(CUcontext *pCtx, unsigned int Flags, CUdevice device)", },
-  ["cuGraphicsGLRegisterBuffer"] = { type ='function', 
-    description = "", 
-    returns = "(CUresult)",
-    valuetype = nil,
-    args = "(CUgraphicsResource *pCudaResource, GLuint buffer, unsigned int Flags)", },
-  ["cuGraphicsGLRegisterImage"] = { type ='function', 
-    description = "", 
-    returns = "(CUresult)",
-    valuetype = nil,
-    args = "(CUgraphicsResource *pCudaResource, GLuint image, GLenum target, unsigned int Flags)", },
-  ["cuWGLGetDevice"] = { type ='function', 
-    description = "", 
-    returns = "(CUresult)",
-    valuetype = nil,
-    args = "(CUdevice *pDevice, HGPUNV hGpu)", },
-  }
-return {
-  cugl = {
-    type = 'lib',
-    description = "Cuda GL Interop",
-    childs = api,
-  },
-  cuGL = {
-    type = 'lib',
-    description = "Cuda GL Interop",
-    childs = api,
-  },
-}

api/lua/wxwidgets.lua

@@ -1,16 +1,24 @@
-local api = {}
-for key in pairs(wx) do
-	api[key] = {
-		type = (type(wx[key]) == "function" and "function" or "value"),
-		description = "",
-		returns = "",
-	}
+local function populateAPI(t)
+  local api = {}
+  for k,v in pairs(t) do
+    api[k] = {
+      type = (type(v) == "function" and "function" or "value"),
+      description = "",
+      returns = "",
+    }
+  end
+  return api
 end
 
 return {
-	wx = {
-		type = "lib",
-		description = "WX lib",
-		childs = api
-	}
-}
+  wx = {
+    type = "lib",
+    description = "wx lib",
+    childs = populateAPI(wx),
+  },
+  wxstc = {
+    type = "lib",
+    description = "wxSTC lib",
+    childs = populateAPI(wxstc),
+  },
+}

bin/lua

@@ -0,0 +1 @@
+lua.app/Contents/MacOS/lua

bin/lua.app/Contents/Info.plist

@@ -13,7 +13,7 @@
 	<key>CFBundleIconFile</key>
 	<string></string>
 	<key>CFBundleIdentifier</key>
-	<string></string>
+	<string>org.Lua.LuaInterpreter</string>
 	<key>CFBundleInfoDictionaryVersion</key>
 	<string>6.0</string>
 	<key>CFBundleLongVersionString</key>

bin/lua52

@@ -0,0 +1 @@
+lua.app/Contents/MacOS/lua52

build/CMakeLists.txt

@@ -84,6 +84,8 @@ if(WIN32)
   install_from_manifest(FILES ${TOPDIR}/zbstudio/MANIFEST ${DATADIR} "^$")
   install_from_manifest(FILES ${TOPDIR}/zbstudio/MANIFEST-bin-win32 ${DATADIR} "^zbstudio.exe$")
 elseif(APPLE)
+  set(OSX_INSTALL_PREFIX "/Applications" CACHE PATH "Default OSX prefix")
+  set(CMAKE_INSTALL_PREFIX "${OSX_INSTALL_PREFIX}" CACHE INTERNAL "Prefix prepended to install directories")
   # setup the data directory
   set(ROOTDIR ZeroBraneStudio.app/Contents)
   set(DATADIR ${ROOTDIR}/ZeroBraneStudio)

build/build-dmg.sh

@@ -1,42 +0,0 @@
-#!/bin/bash
-
-set -x
-
-TEMPLATE_DMG=/tmp/ZeroBraneStudio-template.dmg
-BUILT_DMG=ZeroBraneStudio.dmg
-WKDIR=/tmp/zbs-build
-
-# remove problematic symlink
-rm ../zbstudio/ZeroBraneStudio.app/Contents/ZeroBraneStudio
-
-bunzip2 -kf ZeroBraneStudio.dmg.bz2
-mv ZeroBraneStudio.dmg $TEMPLATE_DMG
-hdiutil attach "${TEMPLATE_DMG}" -noautoopen -quiet -mountpoint "${WKDIR}"
-
-rm -rf "${WKDIR}/ZeroBraneStudio.app"
-
-# copy the app to where it should be
-cp -pr "../zbstudio/ZeroBraneStudio.app" "${WKDIR}/ZeroBraneStudio.app"
-
-mkdir "${WKDIR}/ZeroBraneStudio.app/Contents/ZeroBraneStudio"
-
-# only pick the files listed in manifests and 'myprograms' (if exists)
-if [[ -d ../myprograms ]]; then MYPROGRAMS=$(cd ..; find myprograms -iname *.lua); fi
-(cd ".."; tar cf - $MYPROGRAMS $(< zbstudio/MANIFEST) $(< zbstudio/MANIFEST-bin-macos) | (cd "${WKDIR}/ZeroBraneStudio.app/Contents/ZeroBraneStudio/"; tar xf -))
-
-codesign -s "ZeroBrane LLC" ${WKDIR}/ZeroBraneStudio.app
-codesign --signature-size 6400 -s "ZeroBrane LLC" ${WKDIR}/ZeroBraneStudio.app/Contents/ZeroBraneStudio/bin/lua.app
-
-# clean up
-sudo rm -rf "${WKDIR}/.Trashes"
-sudo rm -rf "${WKDIR}/.fseventsd"
-
-hdiutil detach "${WKDIR}" -quiet -force
-hdiutil convert "${TEMPLATE_DMG}" -quiet -format UDZO -imagekey zlib-level=9 -o "${BUILT_DMG}"
-
-rm -f "${TEMPLATE_DMG}"
-
-cd ../zbstudio/ZeroBraneStudio.app/Contents
-ln -s ../../.. ZeroBraneStudio
-
-echo Built ${BUILT_DMG}.

build/build-linux-prep-deb.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# this script installs prerequisites to build binary files on Linux with deb
+
+sudo apt-get install git-core
+sudo apt-get install g++
+sudo apt-get install subversion
+sudo apt-get install libgtk2.0-dev
+sudo apt-get install cmake
+exit
+
+# install cmake as wxwidgets needs 2.8.4+ but "sudo apt-get install cmake" 
+# only installs 2.8.0 on some systems (like Ubuntu 10.4)
+ mkdir build-cmake
+ cd build-cmake
+ wget http://www.cmake.org/files/v2.8/cmake-2.8.10.2.tar.gz
+ gunzip cmake-2.8.10.2.tar.gz 
+ tar xvf cmake-2.8.10.2.tar 
+ cd cmake-2.8.10.2
+ ./bootstrap
+ make
+ sudo make install
+ cd ../..
+ rm -rf build-cmake

build/build-linux-prep-rpm.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# this script installs prerequisites to build binary files on Linux with rpm
+
+sudo yum install gcc-c++
+sudo yum install git
+sudo yum install svn
+sudo yum install cmake
+sudo yum install gtk2-devel
+sudo yum install wget
+sudo yum install sqlite

build/build-linux.sh

@@ -0,0 +1,214 @@
+#!/bin/bash
+
+if [ "$(uname -m)" = "x86_64" ]; then
+  FPIC="-fpic"
+  ARCH="x64"
+else
+  FPIC=""
+  ARCH="x86"
+fi
+
+# ZBS binary directory
+BIN_DIR="$(dirname "$PWD")/bin/linux/$ARCH"
+
+# temporary installation directory for dependencies
+INSTALL_DIR="$PWD/deps"
+
+# number of parallel jobs used for building
+MAKEFLAGS="-j4"
+
+# flags for manual building with gcc
+BUILD_FLAGS="-O2 -shared -s -I $INSTALL_DIR/include -L $INSTALL_DIR/lib $FPIC"
+
+# paths configuration
+WXWIDGETS_BASENAME="wxWidgets"
+WXWIDGETS_URL="http://svn.wxwidgets.org/svn/wx/wxWidgets/trunk"
+
+WXLUA_BASENAME="wxlua"
+WXLUA_URL="https://svn.code.sf.net/p/wxlua/svn/trunk"
+
+LUASOCKET_BASENAME="luasocket-3.0-rc1"
+LUASOCKET_FILENAME="v3.0-rc1.zip"
+LUASOCKET_URL="https://github.com/diegonehab/luasocket/archive/$LUASOCKET_FILENAME"
+
+# exit if the command line is empty
+if [ $# -eq 0 ]; then
+  echo "Usage: $0 LIBRARY..."
+  exit 0
+fi
+
+# iterate through the command line arguments
+for ARG in "$@"; do
+  case $ARG in
+  5.2)
+    BUILD_52=true
+    ;;
+  jit)
+    BUILD_JIT=true
+    ;;
+  wxwidgets)
+    BUILD_WXWIDGETS=true
+    ;;
+  lua)
+    BUILD_LUA=true
+    ;;
+  wxlua)
+    BUILD_WXLUA=true
+    ;;
+  luasocket)
+    BUILD_LUASOCKET=true
+    ;;
+  all)
+    BUILD_WXWIDGETS=true
+    BUILD_LUA=true
+    BUILD_WXLUA=true
+    BUILD_LUASOCKET=true
+    ;;
+  *)
+    echo "Error: invalid argument $ARG"
+    exit 1
+    ;;
+  esac
+done
+
+# check for g++
+if [ ! "$(which g++)" ]; then
+  echo "Error: g++ isn't found. Please install GNU C++ compiler."
+  exit 1
+fi
+
+# check for cmake
+if [ ! "$(which cmake)" ]; then
+  echo "Error: cmake isn't found. Please install CMake and add it to PATH."
+  exit 1
+fi
+
+# check for svn
+if [ ! "$(which svn)" ]; then
+  echo "Error: svn isn't found. Please install console SVN client."
+  exit 1
+fi
+
+# check for wget
+if [ ! "$(which wget)" ]; then
+  echo "Error: wget isn't found. Please install GNU Wget."
+  exit 1
+fi
+
+# create the installation directory
+mkdir -p "$INSTALL_DIR" || { echo "Error: cannot create directory $INSTALL_DIR"; exit 1; }
+
+LUAV="51"
+LUAS=""
+LUA_BASENAME="lua-5.1.5"
+
+if [ $BUILD_52 ]; then
+  LUAV="52"
+  LUAS=$LUAV
+  LUA_BASENAME="lua-5.2.2"
+fi
+
+LUA_FILENAME="$LUA_BASENAME.tar.gz"
+LUA_URL="http://www.lua.org/ftp/$LUA_FILENAME"
+
+if [ $BUILD_JIT ]; then
+  LUA_BASENAME="LuaJIT-2.0.2"
+  LUA_FILENAME="$LUA_BASENAME.tar.gz"
+  LUA_URL="http://luajit.org/download/$LUA_FILENAME"
+fi
+
+# build wxWidgets
+if [ $BUILD_WXWIDGETS ]; then
+  svn co "$WXWIDGETS_URL" "$WXWIDGETS_BASENAME" || { echo "Error: failed to checkout wxWidgets"; exit 1; }
+
+  cd "$WXWIDGETS_BASENAME"
+  ./configure --prefix="$INSTALL_DIR" --disable-debug --disable-shared --enable-unicode \
+    --enable-compat28 \
+    --with-libjpeg=builtin --with-libpng=builtin --with-libtiff=no --with-expat=no \
+    --with-zlib=builtin --disable-richtext --with-gtk=2 \
+    CFLAGS="-Os -fPIC" CXXFLAGS="-Os -fPIC"
+  make $MAKEFLAGS || { echo "Error: failed to build wxWidgets"; exit 1; }
+  make install
+  cd ..
+  rm -rf "$WXWIDGETS_BASENAME"
+fi
+
+# build Lua
+if [ $BUILD_LUA ]; then
+  wget -c "$LUA_URL" -O "$LUA_FILENAME" || { echo "Error: failed to download Lua"; exit 1; }
+  tar -xzf "$LUA_FILENAME"
+  cd "$LUA_BASENAME"
+
+  if [ $BUILD_JIT ]; then
+    make CCOPT="-DLUAJIT_ENABLE_LUA52COMPAT" || { echo "Error: failed to build Lua"; exit 1; }
+    make install PREFIX="$INSTALL_DIR"
+    cp "$INSTALL_DIR/bin/luajit" "$INSTALL_DIR/bin/lua"
+    # move luajit to lua as it's expected by luasocket and other components
+    cp "$INSTALL_DIR"/include/luajit*/* "$INSTALL_DIR/include/"
+  else
+    # use POSIX as it has minimum dependencies (no readline and no ncurses required)
+    # LUA_USE_DLOPEN is required for loading libraries
+    (cd src; make all MYCFLAGS="$FPIC -DLUA_USE_POSIX -DLUA_USE_DLOPEN" MYLIBS="-Wl,-E -ldl") || { echo "Error: failed to build Lua"; exit 1; }
+    make install INSTALL_TOP="$INSTALL_DIR"
+  fi
+  cp "$INSTALL_DIR/bin/lua" "$INSTALL_DIR/bin/lua$LUAV"
+
+  cd ..
+  rm -rf "$LUA_FILENAME" "$LUA_BASENAME"
+fi
+
+# build wxLua
+if [ $BUILD_WXLUA ]; then
+  svn co "$WXLUA_URL" "$WXLUA_BASENAME" || { echo "Error: failed to checkout wxLua"; exit 1; }
+  cd "$WXLUA_BASENAME/wxLua"
+  # the following patches wxlua source to fix live coding support in wxlua apps
+  # http://www.mail-archive.com/wxlua-users@lists.sourceforge.net/msg03225.html
+  sed -i 's/\(m_wxlState = wxLuaState(wxlState.GetLuaState(), wxLUASTATE_GETSTATE|wxLUASTATE_ROOTSTATE);\)/\/\/ removed by ZBS build process \/\/ \1/' modules/wxlua/wxlcallb.cpp
+
+  # (temporary) fix for compilation issue in wxlua using wxwidgets 3.1+ (r238)
+  sed -i 's/{ "wxSTC_COFFEESCRIPT_HASHQUOTEDSTRING", wxSTC_COFFEESCRIPT_HASHQUOTEDSTRING },/\/\/ removed by ZBS build process/' modules/wxbind/src/wxstc_bind.cpp
+
+  cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" -DCMAKE_BUILD_TYPE=MinSizeRel -DBUILD_SHARED_LIBS=FALSE \
+    -DwxWidgets_CONFIG_EXECUTABLE="$INSTALL_DIR/bin/wx-config" \
+    -DwxWidgets_COMPONENTS="stc;html;aui;adv;core;net;base" \
+    -DwxLuaBind_COMPONENTS="stc;html;aui;adv;core;net;base" -DwxLua_LUA_LIBRARY_USE_BUILTIN=FALSE \
+    -DwxLua_LUA_INCLUDE_DIR="$INSTALL_DIR/include" -DwxLua_LUA_LIBRARY="$INSTALL_DIR/lib/liblua.a" .
+  (cd modules/luamodule; make $MAKEFLAGS) || { echo "Error: failed to build wxLua"; exit 1; }
+  (cd modules/luamodule; make install/strip)
+  [ -f "$INSTALL_DIR/lib/libwx.so" ] || { echo "Error: libwx.so isn't found"; exit 1; }
+  cd ../..
+  rm -rf "$WXLUA_BASENAME"
+fi
+
+# build LuaSocket
+if [ $BUILD_LUASOCKET ]; then
+  wget --no-check-certificate -c "$LUASOCKET_URL" -O "$LUASOCKET_FILENAME" || { echo "Error: failed to download LuaSocket"; exit 1; }
+  unzip "$LUASOCKET_FILENAME"
+  cd "$LUASOCKET_BASENAME"
+  mkdir -p "$INSTALL_DIR/lib/lua/$LUAV/"{mime,socket}
+  gcc $BUILD_FLAGS -o "$INSTALL_DIR/lib/lua/$LUAV/mime/core.so" src/mime.c -llua \
+    || { echo "Error: failed to build LuaSocket"; exit 1; }
+  gcc $BUILD_FLAGS -o "$INSTALL_DIR/lib/lua/$LUAV/socket/core.so" \
+    src/{auxiliar.c,buffer.c,except.c,inet.c,io.c,luasocket.c,options.c,select.c,tcp.c,timeout.c,udp.c,usocket.c} -llua \
+    || { echo "Error: failed to build LuaSocket"; exit 1; }
+  mkdir -p "$INSTALL_DIR/share/lua/$LUAV/socket"
+  cp src/{ftp.lua,http.lua,smtp.lua,tp.lua,url.lua} "$INSTALL_DIR/share/lua/$LUAV/socket"
+  cp src/{ltn12.lua,mime.lua,socket.lua} "$INSTALL_DIR/share/lua/$LUAV"
+  [ -f "$INSTALL_DIR/lib/lua/$LUAV/mime/core.so" ] || { echo "Error: mime/core.so isn't found"; exit 1; }
+  [ -f "$INSTALL_DIR/lib/lua/$LUAV/socket/core.so" ] || { echo "Error: socket/core.so isn't found"; exit 1; }
+  cd ..
+  rm -rf "$LUASOCKET_FILENAME" "$LUASOCKET_BASENAME"
+fi
+
+# now copy the compiled dependencies to ZBS binary directory
+mkdir -p "$BIN_DIR" || { echo "Error: cannot create directory $BIN_DIR"; exit 1; }
+[ $BUILD_LUA ] && cp "$INSTALL_DIR/bin/lua$LUAS" "$BIN_DIR"
+[ $BUILD_WXLUA ] && cp "$INSTALL_DIR/lib/libwx.so" "$BIN_DIR"
+if [ $BUILD_LUASOCKET ]; then
+  mkdir -p "$BIN_DIR/clibs$LUAS/"{mime,socket}
+  cp "$INSTALL_DIR/lib/lua/$LUAV/mime/core.so" "$BIN_DIR/clibs$LUAS/mime"
+  cp "$INSTALL_DIR/lib/lua/$LUAV/socket/core.so" "$BIN_DIR/clibs$LUAS/socket"
+fi
+
+echo "*** Build has been successfully completed ***"
+exit 0

build/build-macosx.sh

@@ -0,0 +1,251 @@
+#!/bin/bash
+
+# ZBS binary directory
+BIN_DIR="$(dirname "$PWD")/bin"
+
+# temporary installation directory for dependencies
+INSTALL_DIR="$PWD/deps"
+
+# Mac OS X global settings
+MACOSX_ARCH="i386"
+MACOSX_VERSION="10.6"
+MACOSX_SDK_PATH="/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk"
+
+# number of parallel jobs used for building
+MAKEFLAGS="-j4"
+
+# flags for manual building with gcc; build universal binaries for luasocket
+MACOSX_FLAGS="-arch $MACOSX_ARCH -mmacosx-version-min=$MACOSX_VERSION"
+if [ -d "$MACOSX_SDK_PATH" ]; then
+  echo "Building with $MACOSX_SDK_PATH"
+  MACOSX_FLAGS="$MACOSX_FLAGS -isysroot $MACOSX_SDK_PATH"
+fi
+BUILD_FLAGS="-O2 -arch x86_64 -dynamiclib -undefined dynamic_lookup $MACOSX_FLAGS -I $INSTALL_DIR/include -L $INSTALL_DIR/lib"
+
+# paths configuration
+WXWIDGETS_BASENAME="wxWidgets"
+WXWIDGETS_URL="http://svn.wxwidgets.org/svn/wx/wxWidgets/trunk"
+
+WXLUA_BASENAME="wxlua"
+WXLUA_URL="https://svn.code.sf.net/p/wxlua/svn/trunk"
+
+LUASOCKET_BASENAME="luasocket-3.0-rc1"
+LUASOCKET_FILENAME="v3.0-rc1.zip"
+LUASOCKET_URL="https://github.com/diegonehab/luasocket/archive/$LUASOCKET_FILENAME"
+
+# exit if the command line is empty
+if [ $# -eq 0 ]; then
+  echo "Usage: $0 LIBRARY..."
+  exit 0
+fi
+
+WXLUASTRIP="/strip"
+WXWIDGETSDEBUG="--disable-debug"
+WXLUABUILD="MinSizeRel"
+
+# iterate through the command line arguments
+for ARG in "$@"; do
+  case $ARG in
+  5.2)
+    BUILD_52=true
+    ;;
+  jit)
+    BUILD_JIT=true
+    ;;
+  wxwidgets)
+    BUILD_WXWIDGETS=true
+    ;;
+  lua)
+    BUILD_LUA=true
+    ;;
+  wxlua)
+    BUILD_WXLUA=true
+    ;;
+  luasocket)
+    BUILD_LUASOCKET=true
+    ;;
+  debug)
+    WXLUASTRIP=""
+    WXWIDGETSDEBUG="--enable-debug=max"
+    WXLUABUILD="Debug"
+    ;;
+  all)
+    BUILD_WXWIDGETS=true
+    BUILD_LUA=true
+    BUILD_WXLUA=true
+    BUILD_LUASOCKET=true
+    ;;
+  *)
+    echo "Error: invalid argument $ARG"
+    exit 1
+    ;;
+  esac
+done
+
+# check for g++
+if [ ! "$(which g++)" ]; then
+  echo "Error: g++ isn't found. Please install GNU C++ compiler."
+  exit 1
+fi
+
+# check for cmake
+if [ ! "$(which cmake)" ]; then
+  echo "Error: cmake isn't found. Please install CMake and add it to PATH."
+  exit 1
+fi
+
+# check for svn
+if [ ! "$(which svn)" ]; then
+  echo "Error: svn isn't found. Please install console SVN client."
+  exit 1
+fi
+
+# check for wget
+if [ ! "$(which wget)" ]; then
+  echo "Error: wget isn't found. Please install GNU Wget."
+  exit 1
+fi
+
+# create the installation directory
+mkdir -p "$INSTALL_DIR" || { echo "Error: cannot create directory $INSTALL_DIR"; exit 1; }
+
+LUAV="51"
+LUAS=""
+LUA_BASENAME="lua-5.1.5"
+
+if [ $BUILD_52 ]; then
+  LUAV="52"
+  LUAS=$LUAV
+  LUA_BASENAME="lua-5.2.2"
+fi
+
+LUA_FILENAME="$LUA_BASENAME.tar.gz"
+LUA_URL="http://www.lua.org/ftp/$LUA_FILENAME"
+
+if [ $BUILD_JIT ]; then
+  LUA_BASENAME="LuaJIT-2.0.2"
+  LUA_FILENAME="$LUA_BASENAME.tar.gz"
+  LUA_URL="http://luajit.org/download/$LUA_FILENAME"
+fi
+
+# build wxWidgets
+if [ $BUILD_WXWIDGETS ]; then
+  svn co "$WXWIDGETS_URL" "$WXWIDGETS_BASENAME" || { echo "Error: failed to checkout wxWidgets"; exit 1; }
+  cd "$WXWIDGETS_BASENAME"
+  MINSDK=""
+  if [ -d $MACOSX_SDK_PATH ]; then
+    MINSDK="--with-macosx-sdk=$MACOSX_SDK_PATH"
+  fi
+  ./configure --prefix="$INSTALL_DIR" $WXWIDGETSDEBUG --disable-shared --enable-unicode \
+    --enable-compat28 \
+    --with-libjpeg=builtin --with-libpng=builtin --with-libtiff=no --with-expat=no \
+    --with-zlib=builtin --disable-richtext \
+    --enable-macosx_arch=$MACOSX_ARCH --with-macosx-version-min=$MACOSX_VERSION $MINSDK \
+    --with-osx_cocoa CFLAGS="-Os" CXXFLAGS="-Os"
+  make $MAKEFLAGS || { echo "Error: failed to build wxWidgets"; exit 1; }
+  make install
+  cd ..
+  rm -rf "$WXWIDGETS_BASENAME"
+fi
+
+# build Lua
+if [ $BUILD_LUA ]; then
+  wget -c "$LUA_URL" -O "$LUA_FILENAME" || { echo "Error: failed to download Lua"; exit 1; }
+  tar -xzf "$LUA_FILENAME"
+  cd "$LUA_BASENAME"
+
+  if [ $BUILD_JIT ]; then
+    make BUILDMODE=dynamic LUAJIT_SO=liblua.dylib TARGET_DYLIBPATH=liblua.dylib CC="gcc -m32" CCOPT="$MACOSX_FLAGS -DLUAJIT_ENABLE_LUA52COMPAT" || { echo "Error: failed to build Lua"; exit 1; }
+    make install PREFIX="$INSTALL_DIR"
+    cp "src/luajit" "$INSTALL_DIR/bin/lua"
+    cp "src/liblua.dylib" "$INSTALL_DIR/lib"
+    # move luajit to lua as it's expected by luasocket and other components
+    cp "$INSTALL_DIR"/include/luajit*/* "$INSTALL_DIR/include/"
+  else
+    sed -i "" 's/PLATS=/& macosx_dylib/' Makefile
+
+    # -O1 fixes this issue with for Lua 5.2 with i386: http://lua-users.org/lists/lua-l/2013-05/msg00070.html
+    printf "macosx_dylib:\n" >> src/Makefile
+    printf "\t\$(MAKE) LUA_A=\"liblua$LUAS.dylib\" AR=\"\$(CC) -dynamiclib $MACOSX_FLAGS -o\" RANLIB=\"strip -u -r\" \\\\\n" >> src/Makefile
+    printf "\tMYCFLAGS=\"-O1 -DLUA_USE_LINUX $MACOSX_FLAGS\" MYLDFLAGS=\"$MACOSX_FLAGS\" MYLIBS=\"-lreadline\" lua\n" >> src/Makefile
+    printf "\t\$(MAKE) MYCFLAGS=\"-DLUA_USE_LINUX $MACOSX_FLAGS\" MYLDFLAGS=\"$MACOSX_FLAGS\" luac\n" >> src/Makefile
+    make macosx_dylib || { echo "Error: failed to build Lua"; exit 1; }
+    make install INSTALL_TOP="$INSTALL_DIR"
+    mv "$INSTALL_DIR/bin/lua" "$INSTALL_DIR/bin/lua$LUAS"
+    cp src/liblua$LUAS.dylib "$INSTALL_DIR/lib"
+  fi
+  strip -u -r "$INSTALL_DIR/bin/lua$LUAS"
+  [ -f "$INSTALL_DIR/lib/liblua$LUAS.dylib" ] || { echo "Error: liblua$LUAS.dylib isn't found"; exit 1; }
+  cd ..
+  rm -rf "$LUA_FILENAME" "$LUA_BASENAME"
+fi
+
+# build wxLua
+if [ $BUILD_WXLUA ]; then
+  svn co "$WXLUA_URL" "$WXLUA_BASENAME" || { echo "Error: failed to checkout wxLua"; exit 1; }
+  cd "$WXLUA_BASENAME/wxLua"
+  MINSDK=""
+  if [ -d $MACOSX_SDK_PATH ]; then
+    MINSDK="CMAKE_OSX_SYSROOT=$MACOSX_SDK_PATH"
+  fi
+  # the following patches wxlua source to fix live coding support in wxlua apps
+  # http://www.mail-archive.com/wxlua-users@lists.sourceforge.net/msg03225.html
+  sed -i "" 's/\(m_wxlState = wxLuaState(wxlState.GetLuaState(), wxLUASTATE_GETSTATE|wxLUASTATE_ROOTSTATE);\)/\/\/ removed by ZBS build process \/\/ \1/' modules/wxlua/wxlcallb.cpp
+
+  # (temporary) fix for compilation issue in wxlua using wxwidgets 3.1+ (r238)
+  sed -i 's/{ "wxSTC_COFFEESCRIPT_HASHQUOTEDSTRING", wxSTC_COFFEESCRIPT_HASHQUOTEDSTRING },/\/\/ removed by ZBS build process/' modules/wxbind/src/wxstc_bind.cpp
+
+  cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" -DCMAKE_BUILD_TYPE=$WXLUABUILD -DBUILD_SHARED_LIBS=FALSE \
+    -DCMAKE_OSX_ARCHITECTURES=$MACOSX_ARCH -DCMAKE_OSX_DEPLOYMENT_TARGET=$MACOSX_VERSION $MINSDK \
+    -DCMAKE_C_COMPILER=/usr/bin/gcc -DCMAKE_CXX_COMPILER=/usr/bin/g++ -DwxWidgets_CONFIG_EXECUTABLE="$INSTALL_DIR/bin/wx-config" \
+    -DwxWidgets_COMPONENTS="stc;html;aui;adv;core;net;base" \
+    -DwxLuaBind_COMPONENTS="stc;html;aui;adv;core;net;base" -DwxLua_LUA_LIBRARY_USE_BUILTIN=FALSE \
+    -DwxLua_LUA_INCLUDE_DIR="$INSTALL_DIR/include" -DwxLua_LUA_LIBRARY="$INSTALL_DIR/lib/liblua.dylib" .
+  (cd modules/luamodule; make $MAKEFLAGS) || { echo "Error: failed to build wxLua"; exit 1; }
+  (cd modules/luamodule; make install$WXLUASTRIP)
+  if [ $WXLUASTRIP ]; then strip -u -r "$INSTALL_DIR/lib/libwx.dylib"; fi
+  [ -f "$INSTALL_DIR/lib/libwx.dylib" ] || { echo "Error: libwx.dylib isn't found"; exit 1; }
+  cd ../..
+  rm -rf "$WXLUA_BASENAME"
+fi
+
+# build LuaSocket
+if [ $BUILD_LUASOCKET ]; then
+  wget --no-check-certificate -c "$LUASOCKET_URL" -O "$LUASOCKET_FILENAME" || { echo "Error: failed to download LuaSocket"; exit 1; }
+  unzip "$LUASOCKET_FILENAME"
+  cd "$LUASOCKET_BASENAME"
+  mkdir -p "$INSTALL_DIR/lib/lua/$LUAV/"{mime,socket}
+  gcc $BUILD_FLAGS -o "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dylib" src/mime.c \
+    || { echo "Error: failed to build LuaSocket"; exit 1; }
+  gcc $BUILD_FLAGS -o "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dylib" \
+    src/{auxiliar.c,buffer.c,except.c,inet.c,io.c,luasocket.c,options.c,select.c,tcp.c,timeout.c,udp.c,usocket.c} \
+    || { echo "Error: failed to build LuaSocket"; exit 1; }
+  strip -u -r "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dylib" "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dylib"
+  install_name_tool -id core.dylib "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dylib"
+  install_name_tool -id core.dylib "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dylib"
+  mkdir -p "$INSTALL_DIR/share/lua/$LUAV/socket"
+  cp src/{ftp.lua,http.lua,smtp.lua,tp.lua,url.lua} "$INSTALL_DIR/share/lua/$LUAV/socket"
+  cp src/{ltn12.lua,mime.lua,socket.lua} "$INSTALL_DIR/share/lua/$LUAV"
+  [ -f "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dylib" ] || { echo "Error: mime/core.dylib isn't found"; exit 1; }
+  [ -f "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dylib" ] || { echo "Error: socket/core.dylib isn't found"; exit 1; }
+  cd ..
+  rm -rf "$LUASOCKET_FILENAME" "$LUASOCKET_BASENAME"
+fi
+
+# now copy the compiled dependencies to ZBS binary directory
+mkdir -p "$BIN_DIR" || { echo "Error: cannot create directory $BIN_DIR"; exit 1; }
+
+if [ $BUILD_LUA ]; then
+  mkdir -p "$BIN_DIR/lua.app/Contents/MacOS"
+  cp "$INSTALL_DIR/bin/lua$LUAS" "$BIN_DIR/lua.app/Contents/MacOS"
+  cp "$INSTALL_DIR/bin/lua$LUAS" "$INSTALL_DIR/lib/liblua$LUAS.dylib" "$BIN_DIR"
+fi
+[ $BUILD_WXLUA ] && cp "$INSTALL_DIR/lib/libwx.dylib" "$BIN_DIR"
+if [ $BUILD_LUASOCKET ]; then
+  mkdir -p "$BIN_DIR/clibs$LUAS/"{mime,socket}
+  cp "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dylib" "$BIN_DIR/clibs$LUAS/mime"
+  cp "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dylib" "$BIN_DIR/clibs$LUAS/socket"
+fi
+
+echo "*** Build has been successfully completed ***"
+exit 0

build/build-win32.sh

@@ -0,0 +1,312 @@
+#!/bin/bash
+
+# ZBS binary directory
+BIN_DIR="$(dirname "$PWD")/bin"
+
+# temporary installation directory for dependencies
+INSTALL_DIR="$PWD/deps"
+
+# number of parallel jobs used for building
+MAKEFLAGS="-j1" # some make may hang on Windows with j4 or j7
+
+# flags for manual building with gcc
+BUILD_FLAGS="-O2 -shared -s -I $INSTALL_DIR/include -L $INSTALL_DIR/lib"
+
+# paths configuration
+WXWIDGETS_BASENAME="wxWidgets"
+WXWIDGETS_URL="http://svn.wxwidgets.org/svn/wx/wxWidgets/trunk"
+
+WXLUA_BASENAME="wxlua"
+WXLUA_URL="https://svn.code.sf.net/p/wxlua/svn/trunk"
+
+LUASOCKET_BASENAME="luasocket-3.0-rc1"
+LUASOCKET_FILENAME="v3.0-rc1.zip"
+LUASOCKET_URL="https://github.com/diegonehab/luasocket/archive/$LUASOCKET_FILENAME"
+
+OPENSSL_BASENAME="openssl-1.0.1e"
+OPENSSL_FILENAME="$OPENSSL_BASENAME.tar.gz"
+OPENSSL_URL="http://www.openssl.org/source/$OPENSSL_FILENAME"
+
+LUASEC_BASENAME="luasec-0.4.1"
+LUASEC_FILENAME="$LUASEC_BASENAME.zip"
+LUASEC_URL="https://github.com/brunoos/luasec/archive/$LUASEC_FILENAME"
+
+WINAPI_BASENAME="winapi"
+WINAPI_URL="https://github.com/stevedonovan/winapi.git"
+
+# exit if the command line is empty
+if [ $# -eq 0 ]; then
+  echo "Usage: $0 LIBRARY..."
+  exit 0
+fi
+
+WXLUASTRIP="/strip"
+WXWIDGETSDEBUG="--disable-debug"
+WXLUABUILD="MinSizeRel"
+
+# iterate through the command line arguments
+for ARG in "$@"; do
+  case $ARG in
+  5.2)
+    BUILD_52=true
+    ;;
+  jit)
+    BUILD_JIT=true
+    ;;
+  wxwidgets)
+    BUILD_WXWIDGETS=true
+    ;;
+  lua)
+    BUILD_LUA=true
+    ;;
+  wxlua)
+    BUILD_WXLUA=true
+    ;;
+  luasocket)
+    BUILD_LUASOCKET=true
+    ;;
+  luasec)
+    BUILD_LUASEC=true
+    ;;
+  winapi)
+    BUILD_WINAPI=true
+    ;;
+  zbstudio)
+    BUILD_ZBSTUDIO=true
+    ;;
+  debug)
+    WXLUASTRIP=""
+    WXWIDGETSDEBUG="--enable-debug=max --enable-debug_gdb"
+    WXLUABUILD="Debug"
+    ;;
+  all)
+    BUILD_WXWIDGETS=true
+    BUILD_LUA=true
+    BUILD_WXLUA=true
+    BUILD_LUASOCKET=true
+    BUILD_WINAPI=true
+    BUILD_ZBSTUDIO=true
+    ;;
+  *)
+    echo "Error: invalid argument $ARG"
+    exit 1
+    ;;
+  esac
+done
+
+# check for g++
+if [ ! "$(which g++)" ]; then
+  echo "Error: g++ isn't found. Please install MinGW C++ compiler."
+  exit 1
+fi
+
+# check for cmake
+if [ ! "$(which cmake)" ]; then
+  echo "Error: cmake isn't found. Please install CMake and add it to PATH."
+  exit 1
+fi
+
+# check for svn
+if [[ ($BUILD_WXWIDGETS || $BUILD_LUA) && ! "$(which svn)" ]]; then
+  echo "Error: svn isn't found. Please install console SVN client."
+  exit 1
+fi
+
+# check for git
+if [[ $BUILD_WINAPI && ! "$(which git)" ]]; then
+  echo "Error: git isn't found. Please install console GIT client."
+  exit 1
+fi
+
+# check for wget
+if [ ! "$(which wget)" ]; then
+  # NOTE: can't check the return status since mingw-get always returns 0 even in the case of errors :(
+  mingw-get install msys-wget
+fi
+
+# create the installation directory
+mkdir -p "$INSTALL_DIR" || { echo "Error: cannot create directory $INSTALL_DIR"; exit 1; }
+
+LUAV="51"
+LUAS=""
+LUA_BASENAME="lua-5.1.5"
+
+if [ $BUILD_52 ]; then
+  LUAV="52"
+  LUAS=$LUAV
+  LUA_BASENAME="lua-5.2.2"
+fi
+
+LUA_FILENAME="$LUA_BASENAME.tar.gz"
+LUA_URL="http://www.lua.org/ftp/$LUA_FILENAME"
+
+if [ $BUILD_JIT ]; then
+  LUA_BASENAME="LuaJIT-2.0.2"
+  LUA_FILENAME="$LUA_BASENAME.tar.gz"
+  LUA_URL="http://luajit.org/download/$LUA_FILENAME"
+fi
+
+# build wxWidgets
+if [ $BUILD_WXWIDGETS ]; then
+  svn co "$WXWIDGETS_URL" "$WXWIDGETS_BASENAME" || { echo "Error: failed to checkout wxWidgets"; exit 1; }
+  svn revert -R "$WXWIDGETS_BASENAME"
+  cd "$WXWIDGETS_BASENAME"
+  ./configure --prefix="$INSTALL_DIR" $WXWIDGETSDEBUG --disable-shared --enable-unicode \
+    --enable-compat28 \
+    --with-libjpeg=builtin --with-libpng=builtin --with-libtiff=no --with-expat=no \
+    --with-zlib=builtin --disable-richtext \
+    CFLAGS="-Os -fno-keep-inline-dllexport" CXXFLAGS="-Os -fno-keep-inline-dllexport"
+  make $MAKEFLAGS || { echo "Error: failed to build wxWidgets"; exit 1; }
+  make install
+  cd ..
+  rm -rf "$WXWIDGETS_BASENAME"
+fi
+
+# build Lua
+if [ $BUILD_LUA ]; then
+  wget -c "$LUA_URL" -O "$LUA_FILENAME" || { echo "Error: failed to download Lua"; exit 1; }
+  tar -xzf "$LUA_FILENAME"
+  cd "$LUA_BASENAME"
+  if [ $BUILD_JIT ]; then
+    make CCOPT="-DLUAJIT_ENABLE_LUA52COMPAT" || { echo "Error: failed to build Lua"; exit 1; }
+    make install PREFIX="$INSTALL_DIR"
+    cp "$INSTALL_DIR/bin/luajit.exe" "$INSTALL_DIR/bin/lua.exe"
+    # move luajit to lua as it's expected by luasocket and other components
+    cp "$INSTALL_DIR"/include/luajit*/* "$INSTALL_DIR/include/"
+  else
+    make mingw || { echo "Error: failed to build Lua"; exit 1; }
+    make install INSTALL_TOP="$INSTALL_DIR"
+  fi
+  cp src/lua$LUAV.dll "$INSTALL_DIR/lib"
+  cp "$INSTALL_DIR/bin/lua.exe" "$INSTALL_DIR/bin/lua$LUAV.exe"
+  [ -f "$INSTALL_DIR/lib/lua$LUAV.dll" ] || { echo "Error: lua$LUAV.dll isn't found"; exit 1; }
+  cd ..
+  rm -rf "$LUA_FILENAME" "$LUA_BASENAME"
+fi
+
+# build wxLua
+if [ $BUILD_WXLUA ]; then
+  svn co "$WXLUA_URL" "$WXLUA_BASENAME" || { echo "Error: failed to checkout wxLua"; exit 1; }
+  svn revert -R "$WXLUA_BASENAME"
+  cd "$WXLUA_BASENAME/wxLua"
+  sed -i 's|:-/\(.\)/|:-\1:/|' "$INSTALL_DIR/bin/wx-config"
+  sed -i 's/execute_process(COMMAND/& sh/' build/CMakewxAppLib.cmake modules/wxstedit/build/CMakewxAppLib.cmake
+
+  # the following patches wxlua source to fix live coding support in wxlua apps
+  # http://www.mail-archive.com/wxlua-users@lists.sourceforge.net/msg03225.html
+  sed -i 's/\(m_wxlState = wxLuaState(wxlState.GetLuaState(), wxLUASTATE_GETSTATE|wxLUASTATE_ROOTSTATE);\)/\/\/ removed by ZBS build process \/\/ \1/' modules/wxlua/wxlcallb.cpp
+
+  # remove check for Lua 5.2 as it doesn't work with Twoface ABI mapper
+  sed -i 's/LUA_VERSION_NUM < 502/0/' modules/wxlua/wxlcallb.cpp
+
+  # (temporary) fix for compilation issue in wxlua in Windows using mingw (r184)
+  sed -i 's/defined(__MINGW32__) || defined(__GNUWIN32__)/0/' modules/wxbind/src/wxcore_bind.cpp
+
+  # (temporary) fix for compilation issue in wxlua using wxwidgets 3.1+ (r238)
+  sed -i 's/{ "wxSTC_COFFEESCRIPT_HASHQUOTEDSTRING", wxSTC_COFFEESCRIPT_HASHQUOTEDSTRING },/\/\/ removed by ZBS build process/' modules/wxbind/src/wxstc_bind.cpp
+
+  [ -f "$INSTALL_DIR/lib/libwxscintilla-3.0.a" ] && cp "$INSTALL_DIR/lib/libwxscintilla-3.0.a" "$INSTALL_DIR/lib/libwx_mswu_scintilla-3.0.a"
+  [ -f "$INSTALL_DIR/lib/libwxscintilla-3.1.a" ] && cp "$INSTALL_DIR/lib/libwxscintilla-3.1.a" "$INSTALL_DIR/lib/libwx_mswu_scintilla-3.1.a"
+
+  echo "set_target_properties(wxLuaModule PROPERTIES LINK_FLAGS -static)" >> modules/luamodule/CMakeLists.txt
+  cmake -G "MSYS Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" -DCMAKE_BUILD_TYPE=$WXLUABUILD -DBUILD_SHARED_LIBS=FALSE \
+    -DwxWidgets_CONFIG_EXECUTABLE="$INSTALL_DIR/bin/wx-config" \
+    -DwxWidgets_COMPONENTS="stc;html;aui;adv;core;net;base" \
+    -DwxLuaBind_COMPONENTS="stc;html;aui;adv;core;net;base" -DwxLua_LUA_LIBRARY_USE_BUILTIN=FALSE \
+    -DwxLua_LUA_INCLUDE_DIR="$INSTALL_DIR/include" -DwxLua_LUA_LIBRARY="$INSTALL_DIR/lib/lua51.dll" .
+  (cd modules/luamodule; make $MAKEFLAGS) || { echo "Error: failed to build wxLua"; exit 1; }
+  (cd modules/luamodule; make install$WXLUASTRIP)
+  [ -f "$INSTALL_DIR/bin/libwx.dll" ] || { echo "Error: libwx.dll isn't found"; exit 1; }
+  cd ../..
+  rm -rf "$WXLUA_BASENAME"
+fi
+
+# build LuaSocket
+if [ $BUILD_LUASOCKET ]; then
+  wget --no-check-certificate -c "$LUASOCKET_URL" -O "$LUASOCKET_FILENAME" || { echo "Error: failed to download LuaSocket"; exit 1; }
+  unzip "$LUASOCKET_FILENAME"
+  cd "$LUASOCKET_BASENAME"
+  mkdir -p "$INSTALL_DIR/lib/lua/$LUAV/"{mime,socket}
+  gcc $BUILD_FLAGS -o "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dll" src/mime.c -llua$LUAV \
+    || { echo "Error: failed to build LuaSocket"; exit 1; }
+  gcc $BUILD_FLAGS -DLUASOCKET_INET_PTON -D_WIN32_WINNT=0x0501 -o "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dll" \
+    src/{auxiliar.c,buffer.c,except.c,inet.c,io.c,luasocket.c,options.c,select.c,tcp.c,timeout.c,udp.c,wsocket.c} -lwsock32 -lws2_32 -llua$LUAV \
+    || { echo "Error: failed to build LuaSocket"; exit 1; }
+  mkdir -p "$INSTALL_DIR/share/lua/$LUAV/socket"
+  cp src/{ftp.lua,http.lua,smtp.lua,tp.lua,url.lua} "$INSTALL_DIR/share/lua/$LUAV/socket"
+  cp src/{ltn12.lua,mime.lua,socket.lua} "$INSTALL_DIR/share/lua/$LUAV"
+  [ -f "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dll" ] || { echo "Error: mime/core.dll isn't found"; exit 1; }
+  [ -f "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dll" ] || { echo "Error: socket/core.dll isn't found"; exit 1; }
+  cd ..
+  rm -rf "$LUASOCKET_FILENAME" "$LUASOCKET_BASENAME"
+fi
+
+# build LuaSec
+if [ $BUILD_LUASEC ]; then
+  # build openSSL
+  wget --no-check-certificate -c "$OPENSSL_URL" -O "$OPENSSL_FILENAME" || { echo "Error: failed to download OpenSSL"; exit 1; }
+  tar -xzf "$OPENSSL_FILENAME"
+  cd "$OPENSSL_BASENAME"
+  bash Configure mingw
+  make
+  make install_sw INSTALLTOP="$INSTALL_DIR"
+  cd ..
+  rm -rf "$OPENSSL_FILENAME" "$OPENSSL_BASENAME"
+
+  # build LuaSec
+  wget --no-check-certificate -c "$LUASEC_URL" -O "$LUASEC_FILENAME" || { echo "Error: failed to download LuaSec"; exit 1; }
+  unzip "$LUASEC_FILENAME"
+  # the folder in the archive is "luasec-luasec-....", so need to fix
+  mv "luasec-$LUASEC_BASENAME" $LUASEC_BASENAME
+  cd "$LUASEC_BASENAME"
+  gcc $BUILD_FLAGS -o "$INSTALL_DIR/lib/lua/5.1/ssl.dll" \
+    src/{timeout.c,buffer.c,io.c,context.c,ssl.c,wsocket.c} -lssl -lcrypto -lws2_32 -lgdi32 -llua51 \
+    || { echo "Error: failed to build LuaSec"; exit 1; }
+  cp src/{ssl.lua,https.lua} "$INSTALL_DIR/share/lua/5.1"
+  [ -f "$INSTALL_DIR/lib/lua/5.1/ssl.dll" ] || { echo "Error: luasec.dll isn't found"; exit 1; }
+  cd ..
+  rm -rf "$LUASEC_FILENAME" "$LUASEC_BASENAME"
+fi
+
+# build winapi
+if [ $BUILD_WINAPI ]; then
+  git clone "$WINAPI_URL" "$WINAPI_BASENAME"
+  cd "$WINAPI_BASENAME"
+  gcc $BUILD_FLAGS -DPSAPI_VERSION=1 -o "$INSTALL_DIR/lib/lua/5.1/winapi.dll" winapi.c wutils.c -lpsapi -lmpr -llua51 \
+    || { echo "Error: failed to build winapi"; exit 1; }
+  [ -f "$INSTALL_DIR/lib/lua/5.1/winapi.dll" ] || { echo "Error: winapi.dll isn't found"; exit 1; }
+  cd ..
+  rm -rf "$WINAPI_BASENAME"
+fi
+
+# build ZBS launcher
+if [ $BUILD_ZBSTUDIO ]; then
+  windres ../zbstudio/res/zbstudio.rc zbstudio.rc.o
+  gcc -O2 -s -mwindows -o ../zbstudio.exe win32_starter.c zbstudio.rc.o
+  rm zbstudio.rc.o
+  [ -f ../zbstudio.exe ] || { echo "Error: zbstudio.exe isn't found"; exit 1; }
+fi
+
+# now copy the compiled dependencies to ZBS binary directory
+mkdir -p "$BIN_DIR" || { echo "Error: cannot create directory $BIN_DIR"; exit 1; }
+
+[ $BUILD_LUA ] && cp "$INSTALL_DIR/bin/lua$LUAS.exe" "$INSTALL_DIR/lib/lua$LUAV.dll" "$BIN_DIR"
+[ $BUILD_WXLUA ] && cp "$INSTALL_DIR/bin/libwx.dll" "$BIN_DIR/wx.dll"
+[ $BUILD_WINAPI ] && cp "$INSTALL_DIR/lib/lua/5.1/winapi.dll" "$BIN_DIR"
+[ $BUILD_LUASEC ] && cp "$INSTALL_DIR/lib/lua/5.1/ssl.dll" "$BIN_DIR"
+
+if [ $BUILD_LUASOCKET ]; then
+  mkdir -p "$BIN_DIR/clibs$LUAS/"{mime,socket}
+  cp "$INSTALL_DIR/lib/lua/$LUAV/mime/core.dll" "$BIN_DIR/clibs$LUAS/mime"
+  cp "$INSTALL_DIR/lib/lua/$LUAV/socket/core.dll" "$BIN_DIR/clibs$LUAS/socket"
+fi
+
+# To build lua5.1.dll proxy:
+# (1) get mkforwardlib-gcc.lua from http://lua-users.org/wiki/LuaProxyDllThree
+# (2) run it as "lua mkforwardlib-gcc.lua lua51 lua5.1 X86"
+# To build lua5.2.dll proxy:
+# (1) get mkforwardlib-gcc-52.lua from http://lua-users.org/wiki/LuaProxyDllThree
+# (2) run it as "lua mkforwardlib-gcc-52.lua lua52 lua5.2 X86"
+
+echo "*** Build has been successfully completed ***"
+exit 0

build/install-deb.sh

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-sudo apt-get install gdebi
-sudo gdebi wxlua*.deb

build/messages.lua

@@ -0,0 +1,96 @@
+-- This scrips extracts all text messages for ZeroBrane Studio and generates
+-- a file that can be used to provide translation to a particular language.
+-- The name of the file -- ll-cc.lua -- has two segments:
+-- ll (mandatory) -- two letter [language code](http://en.wikipedia.org/wiki/List_of_ISO_639-1_codes);
+-- cc (optional) -- two letter [country code](http://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements).
+
+-- You can generate an empty file with all messages by running:
+--  > bin\lua.exe build/messages.lua
+-- You can also update an existing file with new messages by running:
+--  > bin\lua.exe build/messages.lua cfg/i18n/ru.lua
+
+-- store `print` function as it's modified by wxlua and LuaJIT doesn't like
+-- what wxlua has done in that function.
+local print = print
+
+local iswindows = os.getenv('WINDIR') or (os.getenv('OS') or ''):match('[Ww]indows')
+if iswindows or not pcall(require, "wx") then
+  package.cpath = (iswindows and 'bin/?.dll;' or 'bin/lib?.dylib;') .. package.cpath
+end
+
+require "wx"
+
+function FileSysGet(dir,spec)
+  local content = {}
+  local browse = wx.wxFileSystem()
+  local cwd = wx.wxGetCwd()
+  if not wx.wxFileName(dir):DirExists() then return content end
+  local f = browse:FindFirst(dir,spec)
+  while #f>0 do
+    if f:match("^file:") then -- remove file: protocol (wx2.9+)
+      f = f:gsub(iswindows and "^file:/?" or "^file:","")
+        :gsub('%%(%x%x)', function(n) return string.char(tonumber(n, 16)) end)
+    end
+    -- wx2.9+ return absolute path here instead of expected relative; fix it
+    if wx.wxIsAbsolutePath(f) then
+      local relative = wx.wxFileName(f)
+      relative:MakeRelativeTo(cwd)
+      f = relative:GetFullPath()
+    end
+    table.insert(content, f)
+    f = browse:FindNext()
+  end
+  return content
+end
+
+function FileRead(file)
+  local f = wx.wxFile(file, wx.wxFile.read)
+  if not f:IsOpened() then
+    error("Can't open file '"..file.."': "..wx.wxSysErrorMsg()) end
+  local _, content = f:Read(f:Length())
+  f:Close()
+  return content
+end
+
+local file = ... -- pass an existing file name as a parameter
+local messages = {}
+for _, mask in ipairs({"zbstudio/*.lua", "src/main.lua", "src/editor/*.lua"}) do
+  for _, file in ipairs(FileSysGet(mask, wx.wxFILE)) do
+    local content = FileRead(file)
+    for msg in content:gmatch("[^%w]TR(%b())") do
+      -- remove brackets aroung ("foo")
+      -- extract message from ("foo", count)
+      msg = msg:gsub("^%(", ""):gsub("%)$", ""):gsub([[(["']), .+]], "%1")
+      messages[msg] = messages[msg] or {}
+      messages[msg][file] = (messages[msg][file] or 0) + 1
+    end
+  end
+end
+
+local existing = {}
+if file then
+  local content = FileRead(file)
+  for msg, translation in content:gmatch("%s*%[([^%]]+)%]%s*=%s*([^\010\013]+)") do
+    if not translation:find('^nil') then existing[tonumber(msg) or msg] = translation end
+  end
+end
+
+local plural = existing[0] and ("  [0] = "..existing[0].."\n") or ""
+existing[0] = nil
+
+local msgs = {}
+for m, files in pairs(messages) do
+  local str = "  ["..m.."] = "..(existing[m] or 'nil, --')
+  str = str:gsub(" %-%-.*$", "").." -- "
+  for f in pairs(files) do str = str .. f .. ", " end
+  msgs[#msgs+1] = str:gsub(", $", "")
+  existing[m] = nil -- remove from the list of existing elements
+end
+
+table.sort(msgs)
+print("return {\n"..plural..table.concat(msgs, "\n").."\n}")
+if next(existing) then
+  local str = "-- no match found for the following elements: "
+  for msg in pairs(existing) do str = str .. msg .. ", " end
+  print((str:gsub(", $", "")))
+end

build/win32_starter.c

@@ -24,7 +24,6 @@ typedef void varfuncvoid (void *L,...);
 // from lua.h
 #define LUA_GLOBALSINDEX	(-10002)
 
-
 static voidfunc *luaL_newstate;
 static varfunc *luaL_loadbuffer;
 static varfunc *luaL_openlibs;
@@ -146,13 +145,12 @@ int main (int argc, char *argv[])
 #endif
   HINSTANCE hinstLib;
 
-
   char buffer[MAX_PATH],*file;
 
   if (!GetFullPathName(argv[0],MAX_PATH,buffer,&file)) {
     MessageBox(NULL,
       TEXT("Couldn't find the correct working directory"),
-      TEXT("Failed to start estrela"),
+      TEXT("Failed to start editor"),
       MB_OK|MB_ICONERROR);
     return 0;
   }
@@ -166,7 +164,7 @@ int main (int argc, char *argv[])
 
 
   SetDllDirectory(".\\bin\\");
-  hinstLib = LoadLibrary("lua5.1.dll");
+  hinstLib = LoadLibrary("lua51.dll");
   if (hinstLib != NULL)
   {
     luaL_newstate = (voidfunc*) GetProcAddress(hinstLib, "luaL_newstate");
@@ -207,18 +205,18 @@ int main (int argc, char *argv[])
         else
           MessageBox(NULL,
           TEXT("An unexpected error occured while loading the lua chunk."),
-          TEXT("Failed to start estrela"),
+          TEXT("Failed to start editor"),
           MB_OK|MB_ICONERROR);
       } else
         MessageBox(NULL,
         TEXT("Couldn't initialize a luastate"),
-        TEXT("Failed to start estrela"),
+        TEXT("Failed to start editor"),
         MB_OK|MB_ICONERROR);
     } else {
       MessageBox(NULL,
-        TEXT("Could not load all functions that are supposed to be located in the lua5.1.dll\n"
+        TEXT("Could not load all functions that are supposed to be located in the lua51.dll\n"
         "This is not supposed to be happening..."),
-        TEXT("Failed to start estrela"),
+        TEXT("Failed to start editor"),
         MB_OK|MB_ICONERROR);
     }
 
@@ -226,11 +224,10 @@ int main (int argc, char *argv[])
     FreeLibrary(hinstLib);
   } else {
     MessageBox(NULL,
-      TEXT("The lua5.1.dll could not be found or loaded, please check the working directory of the application.\n"),
-      TEXT("Failed to initialize estrela"),
+      TEXT("The lua51.dll could not be found or loaded, please check the working directory of the application.\n"),
+      TEXT("Failed to initialize editor"),
       MB_OK|MB_ICONERROR);
   }
 
-
   return 0;
 }

cfg/brighteditorstyles.lua

@@ -1,38 +0,0 @@
-styles = {
-  -- lexer specific (inherit fg/bg from text)
-  lexerdef = {fg = {128, 128, 128},},
-  comment = {fg = {0, 127, 0 },bg = {240, 240, 220}, fill= true,},
-  stringtxt = {fg = {127, 0, 127},},
-  stringeol = {fg = {0, 0, 0 },bg = {224, 192, 224}, fill = true, },
-  preprocessor = {fg = {127, 127, 0 },},
-  operator = {fg = {0, 0, 0 },},
-  number = {fg = {90, 100, 0 },},
-
-  keywords0 = {fg = {0, 0, 127}, b = true,},
-  keywords1 = {fg = {127, 0, 0}, b = true,},
-  keywords2 = {fg = {0, 127, 0}, b = true,},
-  keywords3 = {fg = {0, 0, 127}, b = true,},
-  keywords4 = {fg = {127, 0, 95}, b = true,},
-  keywords5 = {fg = {35, 95, 175}, b = true,},
-  keywords6 = {fg = {0, 127, 127}, b = true,},
-  keywords7 = {fg = {240, 255, 255}, b = true,},
-
-  -- common (inherit fg/bg from text)
-  text = nil, -- let os pick
-  linenumber = {fg = {90, 90, 80},},
-  bracematch = {fg = {0, 0, 255}, b = true},
-  bracemiss = {fg = {255, 0, 0 }, b = true},
-  ctrlchar = nil,
-  indent = {fg = {192, 192, 192},bg = {255, 255, 255},},
-  calltip = nil,
-
-  -- common special (need custom fg & bg)
-  calltipbg = nil,
-  sel = nil,
-  caret = nil,
-  caretlinebg = nil,
-  fold = nil,
-  whitespace = {fg = {180, 180, 180,},},
-
-  fncall = {fg = {175,175,255}, st= wxstc.wxSTC_INDIC_BOX},
-}

cfg/darkeditorstyles.lua

@@ -1,38 +0,0 @@
-styles = {
-  -- lexer specific (inherit fg/bg from text)
-  lexerdef = {fg = {128, 128, 128},},
-  comment = {fg = {200, 230, 120 },bg = {30, 40, 30 }, fill= true,},
-  stringtxt = {fg = {240,128,240},},
-  stringeol = {fg = {240,128,200},bg = {48, 24, 24}, fill = true,},
-  preprocessor = {fg = {220,175,140},},
-  operator = {fg = {210, 230, 240 },},
-  number = {fg = {210, 230, 255, },},
-
-  keywords0 = {fg = {240,240,0}},
-  keywords1 = {fg = {255,64,64},},
-  keywords2 = {fg = {0,240,240},},
-  keywords3 = {fg = {140,140,240},},
-  keywords4 = {fg = {255, 128, 0},},
-  keywords5 = {fg = {200,200,240},},
-  keywords6 = {fg = {64, 250, 64},},
-  keywords7 = {fg = {255, 128, 128},},
-
-  -- common (inherit fg/bg from text)
-  text = {fg = {240,240,240},bg = {24,24,24},},
-  linenumber = {fg = {30, 30, 40},bg = {230, 230, 230},},
-  bracematch = {fg = {255, 127, 0}, b = true},
-  bracemiss = {fg = {255, 0,0}, b = true},
-  ctrlchar = nil,
-  indent = {fg = {80, 80, 80},bg = {24,24,24},},
-  calltip = {fg = {255,255,255},bg = {10,10,10},},
-
-  -- common special (need custom fg & bg)
-  calltipbg = {fg = {240,240,240},bg = {10,10,10},},
-  sel = {fg = {180,220,140},bg = {70,105,100},},
-  caret = {fg = {250,250,250},},
-  caretlinebg = {fg = {180,220,140},bg = {24,44,44},},
-  fold = nil,
-  whitespace = {fg = {54,54,54},},
-
-  fncall = {fg = {140,140,0}, st = wxstc.wxSTC_INDIC_BOX},
-}

cfg/darkeditorstyles_dim.lua

@@ -1,38 +0,0 @@
-styles = {
-  -- lexer specific (inherit fg/bg from text)
-  lexerdef = {fg = {128, 128, 128},},
-  comment = {fg = {100, 155, 65}, bg = {30, 35, 30 }, fill= true,},
-  stringtxt = {fg = {200, 145, 145},},
-  stringeol = {fg = {200, 145, 145},bg = {48, 24, 24}, fill = true,},
-  preprocessor = {fg = {220, 175, 140},},
-  operator = {fg = {210, 230, 240 },},
-  number = {fg = {210, 230, 255, },},
-
-  keywords0 = {fg = {128,128,255},},
-  keywords1 = {fg = {210,90,90},},
-  keywords2 = {fg = {0,220,220},},
-  keywords3 = {fg = {220,220,0},},
-  keywords4 = {fg = {240, 128,0},},
-  keywords5 = {fg = {200,200,240},},
-  keywords6 = {fg = {64, 240, 64},},
-  keywords7 = {fg = {255, 128, 128},},
-
-  -- common (inherit fg/bg from text)
-  text = {fg = {200,200,200},bg = {18,24,26},},
-  linenumber = {fg = {30, 30, 40},bg = {230, 230, 230},},
-  bracematch = {fg = {255, 127, 0}, b = true},
-  bracemiss = {fg = {255, 0,0}, b = true},
-  ctrlchar = nil,
-  indent = {fg = {80, 80, 80},bg = {24,24,24},},
-  calltip = {fg = {255,255,255},bg = {10,10,10},},
-
-  -- common special (need custom fg & bg)
-  calltipbg = {fg = {240,240,240},bg = {10,10,10},},
-  sel = {fg = {180,220,140},bg = {70,105,100},},
-  caret = {fg = {250,250,250},},
-  caretlinebg = {fg = {180,220,140},bg = {24,44,44},},
-  fold = nil,
-  whitespace = {fg = {54,54,54},},
-
-  fncall = {fg = {75,75,150}, st= wxstc.wxSTC_INDIC_BOX},
-}

cfg/estrela.lua

@@ -1,67 +1,20 @@
-local G = ... -- point to the global environment in the script
--- update app configuration to load all tools, specs, and interpreters
-G.ide.app.loadfilters.tools = function() return true end
-G.ide.app.loadfilters.specs = function() return true end
-G.ide.app.loadfilters.interpreters = function() return true end
+-- If you have used Estrela before, please copy this content
+-- to your user.lua file in the cfg/ directory
 
+-- load all tools, specs, and interpreters
+local all = function() return true end
+load.tools(all)
+load.specs(all)
+load.interpreters(all)
+
+-- this flag means that toggling between projects, will not affect the 
+-- list of opened files (old estrela default).
+-- zbstudio defaults here to true, meaning that you get 
+-- per-project list of openend files
+projectautoopen = false
+
+-- default search paths for luxinia
 local luxpath = os.getenv("LUXINIA")
 path.luxinia = luxpath and luxpath.."/" or "../luxinia/engine/"
 local luxpath2 = os.getenv("LUXINIA2")
 path.luxinia2 = luxpath2 and luxpath2.."/" or "../luxinia2/runtime/bin_Windows_x86/"
-
-interpreter = "luadeb"
-
-editor.fontname = "Courier New"
-editor.caretline = true
-editor.showfncall = true
-editor.whitespace = true
-editor.usetabs  = false
-editor.autotabs = true
-editor.tabwidth = 2
-
-filehistorylength = 20
-
-singleinstance = true
-singleinstanceport = 0xe493
-acandtip.shorttip = true
-acandtip.nodynwords = true
-acandtip.ignorecase = true
-
-styles = {
-  -- lexer specific (inherit fg/bg from text)
-  lexerdef = {fg = {128, 128, 128},},
-  comment = {fg = {0, 127, 0 },bg = {240, 240, 220}, fill= true,},
-  stringtxt = {fg = {127, 0, 127},},
-  stringeol = {fg = {0, 0, 0 },bg = {224, 192, 224}, fill = true, },
-  preprocessor = {fg = {127, 127, 0 },},
-  operator = {fg = {0, 0, 0 },},
-  number = {fg = {90, 100, 0 },},
-
-  keywords0 = {fg = {0, 0, 127}, b = true,},
-  keywords1 = {fg = {127, 0, 0}, b = true,},
-  keywords2 = {fg = {0, 127, 0}, b = true,},
-  keywords3 = {fg = {0, 0, 127}, b = true,},
-  keywords4 = {fg = {127, 0, 95}, b = true,},
-  keywords5 = {fg = {35, 95, 175}, b = true,},
-  keywords6 = {fg = {0, 127, 127}, b = true,},
-  keywords7 = {fg = {240, 255, 255}, b = true,},
-
-  -- common (inherit fg/bg from text)
-  text = nil, -- let os pick
-  linenumber = {fg = {90, 90, 80},},
-  bracematch = {fg = {0, 0, 255}, b = true},
-  bracemiss = {fg = {255, 0, 0 }, b = true},
-  ctrlchar = nil,
-  indent = {fg = {192, 192, 192},bg = {255, 255, 255},},
-  calltip = nil,
-
-  -- common special (need custom fg & bg)
-  calltipbg = nil,
-  sel = nil,
-  caret = nil,
-  caretlinebg = nil,
-  fold = nil,
-  whitespace = nil,
-
-  fncall = {fg = {175,175,255}, st= wxstc.wxSTC_INDIC_BOX},
-}

cfg/i18n/cn.lua

@@ -0,0 +1,286 @@
+return {
+  ["%d instance"] = "%d 个体", -- src\editor\findreplace.lua
+  ["%s event failed: %s"] = nil, -- src\editor\package.lua
+  ["&About"] = "关于(&A)", -- src\editor\menu_help.lua
+  ["&Add Watch"] = "添加监视(&A)", -- src\editor\debugger.lua
+  ["&Break"] = "中断", -- src\editor\menu_project.lua
+  ["&Close Page"] = "关闭页面", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Community"] = nil, -- src\editor\menu_help.lua
+  ["&Compile"] = "编译", -- src\editor\menu_project.lua
+  ["&Copy"] = "复制", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Default Layout"] = "布局", -- src\editor\menu_view.lua
+  ["&Delete Watch"] = "删除监视", -- src\editor\debugger.lua
+  ["&Delete"] = nil, -- src\editor\filetree.lua
+  ["&Documentation"] = nil, -- src\editor\menu_help.lua
+  ["&Down"] = "往下", -- src\editor\findreplace.lua
+  ["&Edit Project Directory"] = nil, -- src\editor\filetree.lua
+  ["&Edit Watch"] = "编辑监视", -- src\editor\debugger.lua
+  ["&Edit"] = "编辑", -- src\editor\menu_edit.lua
+  ["&File"] = "文件", -- src\editor\menu_file.lua
+  ["&Find All"] = "查找全部", -- src\editor\findreplace.lua
+  ["&Find Next"] = "查找下一个", -- src\editor\findreplace.lua
+  ["&Find"] = "查找", -- src\editor\menu_search.lua
+  ["&Fold/Unfold All"] = "全 折叠/展开", -- src\editor\menu_edit.lua
+  ["&Frequently Asked Questions"] = nil, -- src\editor\menu_help.lua
+  ["&Getting Started Guide"] = nil, -- src\editor\menu_help.lua
+  ["&Go To Line..."] = "到...行", -- src\editor\menu_search.lua
+  ["&Help"] = "帮助", -- src\editor\menu_help.lua
+  ["&New Directory"] = nil, -- src\editor\filetree.lua
+  ["&New"] = "新建", -- src\editor\menu_file.lua
+  ["&Open..."] = "打开...", -- src\editor\menu_file.lua
+  ["&Output/Console Window"] = "输出/主控台视窗", -- src\editor\menu_view.lua
+  ["&Paste"] = "粘贴", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Project Page"] = nil, -- src\editor\menu_help.lua
+  ["&Project"] = "项目", -- src\editor\inspect.lua, src\editor\menu_project.lua
+  ["&Redo"] = "重做", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Rename"] = nil, -- src\editor\filetree.lua
+  ["&Replace All"] = "全替换", -- src\editor\findreplace.lua
+  ["&Replace"] = "替换", -- src\editor\findreplace.lua, src\editor\menu_search.lua
+  ["&Run"] = "执行", -- src\editor\menu_project.lua
+  ["&Save"] = "保存", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Search"] = "搜索", -- src\editor\menu_search.lua
+  ["&Sort"] = "分类", -- src\editor\menu_edit.lua
+  ["&Stack Window"] = "叠视窗/堆栈视窗", -- src\editor\menu_view.lua
+  ["&Start Debugger Server"] = "开启除错器伺服机", -- src\editor\menu_project.lua
+  ["&Status Bar"] = nil, -- src\editor\menu_view.lua
+  ["&Subdirectories"] = "子文件夹", -- src\editor\findreplace.lua
+  ["&Tool Bar"] = nil, -- src\editor\menu_view.lua
+  ["&Tutorials"] = nil, -- src\editor\menu_help.lua
+  ["&Undo"] = "撤消", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Up"] = "往上", -- src\editor\findreplace.lua
+  ["&View"] = "视图", -- src\editor\menu_view.lua
+  ["&Watch Window"] = "监视视窗", -- src\editor\menu_view.lua
+  [".&bak on Replace"] = nil, -- src\editor\findreplace.lua
+  ["About %s"] = "关于 %s", -- src\editor\menu_help.lua
+  ["Add To Scratchpad"] = nil, -- src\editor\editor.lua
+  ["Add Watch Expression"] = "添加监视表达式", -- src\editor\editor.lua
+  ["All files"] = "全部文件", -- src\editor\commands.lua
+  ["Allow external process to start debugging"] = "允许外部进程开启除错", -- src\editor\menu_project.lua
+  ["Analyze the source code"] = "分析源代码", -- src\editor\inspect.lua
+  ["Analyze"] = "分析", -- src\editor\inspect.lua
+  ["Auto Complete Identifiers"] = "自动补全标识符", -- src\editor\menu_edit.lua
+  ["Auto complete while typing"] = "当输入时自动补全", -- src\editor\menu_edit.lua
+  ["Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Break execution at the next executed line of code"] = "执行下一语句之后中断执行", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["C&lear Output Window"] = "清除输出视窗", -- src\editor\menu_project.lua
+  ["C&omment/Uncomment"] = "注释/消除注释", -- src\editor\menu_edit.lua
+  ["Can't debug the script in the active editor window."] = "不能在现行编辑视窗对脚本进行除错", -- src\editor\debugger.lua
+  ["Can't find file '%s' in the current project to activate for debugging. Update the project or open the file in the editor before debugging."] = "在当前项目中寻找不到文件 '%s' 以进行激活然后除错, 更新项目或是在编辑器里开启文件后再除错", -- src\editor\debugger.lua
+  ["Can't process auto-recovery record; invalid format: %s."] = "不能处理自动恢复存档: %s", -- src\editor\commands.lua
+  ["Can't run the entry point script ('%s')."] = "不能执行entry point脚本 ('%s')", -- src\editor\debugger.lua
+  ["Can't start debugger server at %s:%d: %s."] = nil, -- src\editor\debugger.lua
+  ["Can't start debugging session due to internal error '%s'."] = "除错动作失败 '%s'.", -- src\editor\debugger.lua
+  ["Can't start debugging without an opened file or with the current file not being saved ('%s')."] = "不能启动除错，没有文档被开启或当前更改过的文档还没保存('%s')", -- src\editor\debugger.lua
+  ["Can't stop debugger server as it is not started."] = nil, -- src\editor\debugger.lua
+  ["Cancel"] = "取消", -- src\editor\findreplace.lua
+  ["Cancelled by the user."] = nil, -- src\editor\findreplace.lua
+  ["Choose a project directory"] = "选择项目文件夹", -- src\editor\findreplace.lua, src\editor\menu_project.lua, src\editor\gui.lua, src\editor\filetree.lua
+  ["Choose..."] = "请选...", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Clear Items"] = nil, -- src\editor\menu_file.lua
+  ["Clear items from this list"] = nil, -- src\editor\menu_file.lua
+  ["Clear the output window before compiling or debugging"] = "编译或除错前清除输出视窗", -- src\editor\menu_project.lua
+  ["Close &Other Pages"] = "关闭其他页面", -- src\editor\gui.lua
+  ["Close A&ll Pages"] = "关闭全部页面", -- src\editor\gui.lua
+  ["Close the current editor window"] = "关闭当前编译视窗", -- src\editor\menu_file.lua
+  ["Co&ntinue"] = "继续", -- src\editor\menu_project.lua
+  ["Col: %d"] = "列: %d", -- src\editor\editor.lua
+  ["Command Line Parameters..."] = nil, -- src\editor\menu_project.lua
+  ["Command line parameters"] = nil, -- src\editor\menu_project.lua
+  ["Comment or uncomment current or selected lines"] = "注释/消除注释 当前或被选的语句", -- src\editor\menu_edit.lua
+  ["Compilation error"] = "编译错误", -- src\editor\commands.lua, src\editor\debugger.lua
+  ["Compilation successful; %.0f%% success rate (%d/%d)."] = "编译成功; 成功率: %.0f%% (%d/%d).", -- src\editor\commands.lua
+  ["Compile the current file"] = "编译当前的文档", -- src\editor\menu_project.lua
+  ["Complete &Identifier"] = "补全标识符", -- src\editor\menu_edit.lua
+  ["Complete the current identifier"] = "补全当前标识符", -- src\editor\menu_edit.lua
+  ["Consider removing backslash from escape sequence '%s'."] = nil, -- src\editor\commands.lua
+  ["Copy Full Path"] = nil, -- src\editor\filetree.lua
+  ["Copy selected text to clipboard"] = "复制被选的text到clipboard", -- src\editor\menu_edit.lua
+  ["Couldn't activate file '%s' for debugging; continuing without it."] = "不能激活 '%s' 以除错; 省略后继续进行", -- src\editor\debugger.lua
+  ["Create an empty document"] = "新建空文档", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Cu&t"] = "剪切", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Cut selected text to clipboard"] = "剪切被选的text到clipboard", -- src\editor\menu_edit.lua
+  ["Debugger server started at %s:%d."] = "除错伺服器起始于 %s:%d.", -- src\editor\debugger.lua
+  ["Debugger server stopped at %s:%d."] = nil, -- src\editor\debugger.lua
+  ["Debugging session completed (%s)."] = "除错会话完成 (%s)", -- src\editor\debugger.lua
+  ["Debugging session started in '%s'."] = "除错会话于 '%s' 起始", -- src\editor\debugger.lua
+  ["Debugging suspended at %s:%s (couldn't activate the file)."] = "除错挂起于 %s:%s (不能激活文档).", -- src\editor\debugger.lua
+  ["Detach &Process"] = nil, -- src\editor\menu_project.lua
+  ["Directory"] = "文件夹", -- src\editor\findreplace.lua
+  ["Do you want to delete '%s'?"] = nil, -- src\editor\filetree.lua
+  ["Do you want to overwrite it?"] = nil, -- src\editor\commands.lua
+  ["Do you want to reload it?"] = "需要重新导入吗?", -- src\editor\editor.lua
+  ["Do you want to save the changes to '%s'?"] = "需要把更改保存于 '%s'?", -- src\editor\commands.lua
+  ["E&xit"] = "离开", -- src\editor\menu_file.lua
+  ["Enter Lua code and press Enter to run it."] = "输入Lua代码然后按 <Enter> 以执行", -- src\editor\shellbox.lua
+  ["Enter command line parameters (use Cancel to clear)"] = nil, -- src\editor\menu_project.lua
+  ["Enter line number"] = "输入行号码", -- src\editor\menu_search.lua
+  ["Error while loading API file: %s"] = "导入API档时出错误: %s", -- src\editor\autocomplete.lua
+  ["Error while loading configuration file: %s"] = "导入configuration档时出错误: %s", -- src\editor\style.lua
+  ["Error while processing API file: %s"] = "处理API档时出错误: %s", -- src\editor\autocomplete.lua
+  ["Error while processing configuration file: %s"] = "处理configuration档时出错误: %s", -- src\editor\style.lua
+  ["Error"] = "错误", -- src\editor\commands.lua
+  ["Evaluate In Console"] = nil, -- src\editor\editor.lua
+  ["Execute the current project/file and keep updating the code to see immediate results"] = "执行当前项目/文档和更新代码以便得到执行结果", -- src\editor\menu_project.lua
+  ["Execute the current project/file"] = "执行当前项目/文档", -- src\editor\menu_project.lua
+  ["Execution error"] = "执行出错误", -- src\editor\debugger.lua
+  ["Exit program"] = "离开程式", -- src\editor\menu_file.lua
+  ["Expr"] = "表达式", -- src\editor\debugger.lua
+  ["Expression"] = "表达式", -- src\editor\debugger.lua
+  ["File '%s' has been modified on disk."] = "磁碟上的文档 '%s' 已被更改", -- src\editor\editor.lua
+  ["File '%s' has more recent timestamp than restored '%s'; please review before saving."] = "文档 '%s' 的时间戳比 '%s' 更新近; 请检验后再保存", -- src\editor\commands.lua
+  ["File '%s' no longer exists."] = "文档 '%s' 已不存在", -- src\editor\menu_file.lua, src\editor\editor.lua
+  ["File Type"] = "文档类", -- src\editor\findreplace.lua
+  ["File already exists."] = nil, -- src\editor\commands.lua
+  ["File history"] = "文档历史", -- src\editor\menu_file.lua
+  ["Find &In Files"] = "在文档中查找", -- src\editor\menu_search.lua
+  ["Find &Next"] = "查找下一个", -- src\editor\menu_search.lua
+  ["Find &Previous"] = "查找上一个", -- src\editor\menu_search.lua
+  ["Find In Files"] = "在文档中查找", -- src\editor\findreplace.lua
+  ["Find and replace text in files"] = "在文档中查找text然后更换", -- src\editor\menu_search.lua
+  ["Find and replace text"] = "查找text然后更换", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find text in files"] = "在文档中查找text", -- src\editor\menu_search.lua
+  ["Find text"] = "查找text", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find the earlier text occurence"] = "查找之前出现的text", -- src\editor\menu_search.lua
+  ["Find the next text occurrence"] = "查找之後将出现的text", -- src\editor\menu_search.lua
+  ["Find"] = "查找", -- src\editor\findreplace.lua
+  ["Fold or unfold all code folds"] = "折叠/展开所有代码折叠", -- src\editor\menu_edit.lua
+  ["Found auto-recovery record and restored saved session."] = "找到自动恢复存档和恢复已存对话", -- src\editor\commands.lua
+  ["Found"] = "找到", -- src\editor\findreplace.lua
+  ["Full &Screen"] = "全屏", -- src\editor\menu_view.lua
+  ["Go To Definition"] = nil, -- src\editor\editor.lua
+  ["Go To Line"] = "到...行", -- src\editor\menu_search.lua
+  ["Go To Next Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Go To Previous Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Go to a selected line"] = "到所选的行", -- src\editor\menu_search.lua
+  ["INS"] = "INS", -- src\editor\editor.lua
+  ["In Files"] = "在档案里", -- src\editor\findreplace.lua
+  ["Jump to a function definition..."] = "跳到函数定义", -- src\editor\editor.lua
+  ["Known Files"] = "所知的文档", -- src\editor\commands.lua
+  ["Ln: %d"] = "行: %d", -- src\editor\editor.lua
+  ["Local console"] = "本地主控台", -- src\editor\gui.lua, src\editor\shellbox.lua
+  ["Lua &Interpreter"] = "Lua 解释器", -- src\editor\menu_project.lua
+  ["Mapped remote request for '%s' to '%s'."] = "映射远程请求 '%s' 至 '%s'", -- src\editor\debugger.lua
+  ["Match &case"] = "case匹配", -- src\editor\findreplace.lua
+  ["Match &whole word"] = "全句匹配", -- src\editor\findreplace.lua
+  ["Mixed end-of-line encodings detected."] = "发现混杂的EOL编码", -- src\editor\commands.lua
+  ["New &File"] = nil, -- src\editor\filetree.lua
+  ["OVR"] = "OVR", -- src\editor\editor.lua
+  ["Open With Default Program"] = nil, -- src\editor\filetree.lua
+  ["Open an existing document"] = "打开现存文档", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Open file"] = "打开文档", -- src\editor\commands.lua
+  ["Options"] = "选项", -- src\editor\findreplace.lua
+  ["Output (running)"] = "输出 (进行中)", -- src\editor\output.lua
+  ["Output"] = "输出", -- src\editor\gui.lua, src\editor\output.lua, src\editor\settings.lua
+  ["Paste text from the clipboard"] = "从clipboard粘贴text", -- src\editor\menu_edit.lua
+  ["Preferences"] = "首选项", -- src\editor\menu_edit.lua
+  ["Prepend '=' to show complex values on multiple lines."] = "在多行展现复杂值请前置 '='", -- src\editor\shellbox.lua
+  ["Press cancel to abort."] = "按 <cancel> 以退出", -- src\editor\commands.lua
+  ["Program '%s' started in '%s' (pid: %d)."] = "程式 '%s' 执行于 '%s' (pid: %d).", -- src\editor\output.lua
+  ["Program can't start because conflicting process is running as '%s'."] = "程序不能启动因为有名为 '%s' 的冲突进程", -- src\editor\output.lua
+  ["Program completed in %.2f seconds (pid: %d)."] = "程序于 %.2f 秒完成 (pid: %d).", -- src\editor\output.lua
+  ["Program starting as '%s'."] = "程式以 '%s' 执行", -- src\editor\output.lua
+  ["Program stopped (pid: %d)."] = "程式停止 (pid: %d).", -- src\editor\debugger.lua
+  ["Program unable to run as '%s'."] = "程式不能以 '%s' 执行", -- src\editor\output.lua
+  ["Project Directory"] = "项目文件夹", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Project history"] = nil, -- src\editor\menu_file.lua
+  ["Project"] = "项目", -- src\editor\gui.lua
+  ["Project/&FileTree Window"] = "项目/文档树 视窗", -- src\editor\menu_view.lua
+  ["Provide command line parameters"] = nil, -- src\editor\menu_project.lua
+  ["R/O"] = "唯读", -- src\editor\editor.lua
+  ["R/W"] = "读写", -- src\editor\editor.lua
+  ["Re&place In Files"] = "在文档中替换", -- src\editor\menu_search.lua
+  ["Recent &Projects"] = nil, -- src\editor\menu_file.lua
+  ["Recent Files"] = "最近的文档", -- src\editor\menu_file.lua
+  ["Redo last edit undone"] = "重做最后被取消的编辑", -- src\editor\menu_edit.lua
+  ["Refused a request to start a new debugging session as there is one in progress already."] = "因为有另一个除错在进行，拒绝开启新的除错对话", -- src\editor\debugger.lua
+  ["Regular &expression"] = "正则表达式", -- src\editor\findreplace.lua
+  ["Remote console"] = "远程主控台", -- src\editor\shellbox.lua
+  ["Rename All Instances"] = nil, -- src\editor\editor.lua
+  ["Replace A&ll"] = "更换全部", -- src\editor\findreplace.lua
+  ["Replace"] = "更换", -- src\editor\findreplace.lua
+  ["Replaced an invalid UTF8 character with %s."] = "以%s更换无效的UTF8字元", -- src\editor\commands.lua
+  ["Replaced"] = "更换", -- src\editor\findreplace.lua
+  ["Replacing"] = "更换中", -- src\editor\findreplace.lua
+  ["Reset to default layout"] = "重置缺省布局", -- src\editor\menu_view.lua
+  ["Run as Scratchpad"] = "以Scratchpad执行", -- src\editor\menu_project.lua
+  ["S&top Debugging"] = "停止除错", -- src\editor\menu_project.lua
+  ["S&top Process"] = "停止进程", -- src\editor\menu_project.lua
+  ["Save &As..."] = "另存为...", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save A&ll"] = "全部存档", -- src\editor\menu_file.lua
+  ["Save Changes?"] = "存档更新?", -- src\editor\commands.lua
+  ["Save all open documents"] = "保存所有开启的文档", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save file as"] = "文档另存为", -- src\editor\commands.lua
+  ["Save file?"] = "保存文档?", -- src\editor\commands.lua
+  ["Save the current document to a file with a new name"] = "用新档案名称保存当前文档", -- src\editor\menu_file.lua
+  ["Save the current document"] = "保存当前文档", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Saved auto-recover at %s."] = "在 %s 存档自动恢复", -- src\editor\commands.lua
+  ["Scope"] = "范围", -- src\editor\findreplace.lua
+  ["Scratchpad error"] = "暂存器错误", -- src\editor\debugger.lua
+  ["Searching for"] = "搜索", -- src\editor\findreplace.lua
+  ["Sel: %d/%d"] = nil, -- src\editor\editor.lua
+  ["Select &All"] = "选全部", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Select all text in the editor"] = "选编辑器内的所有text", -- src\editor\menu_edit.lua
+  ["Select and Find Next"] = nil, -- src\editor\menu_search.lua
+  ["Select and Find Previous"] = nil, -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its next occurrence"] = nil, -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its previous occurrence"] = nil, -- src\editor\menu_search.lua
+  ["Set From Current File"] = "从当前文档设置", -- src\editor\menu_project.lua
+  ["Set project directory from current file"] = "从当前文档设置项目文件夹", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Set the interpreter to be used"] = "设置解释器", -- src\editor\menu_project.lua
+  ["Set the project directory to be used"] = "设置项目文件夹", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Settings: System"] = "设置: 系统", -- src\editor\menu_edit.lua
+  ["Settings: User"] = "设置: 用户", -- src\editor\menu_edit.lua
+  ["Show &Tooltip"] = "展现tooltip", -- src\editor\menu_edit.lua
+  ["Show Location"] = nil, -- src\editor\gui.lua, src\editor\filetree.lua
+  ["Show tooltip for current position; place cursor after opening bracket of function"] = "在当前的位置展现tooltip; 把游标放置于函数的开括号之后", -- src\editor\menu_edit.lua
+  ["Show/Hide the status bar"] = nil, -- src\editor\menu_view.lua
+  ["Show/Hide the toolbar"] = nil, -- src\editor\menu_view.lua
+  ["Sort selected lines"] = "对被选的行进行排列", -- src\editor\menu_edit.lua
+  ["Stack"] = "堆栈", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Start &Debugging"] = "开始除错", -- src\editor\menu_project.lua
+  ["Start or Continue debugging"] = nil, -- src\editor\gui.lua
+  ["Start or continue debugging"] = nil, -- src\editor\menu_project.lua
+  ["Step &Into"] = "除错运行 进入子程序/函数", -- src\editor\menu_project.lua
+  ["Step &Over"] = "除错运行 掠过子程序/函数", -- src\editor\menu_project.lua
+  ["Step O&ut"] = "除错运行 离开子程序/函数", -- src\editor\menu_project.lua
+  ["Step into"] = "除错运行 进入子程序/函数", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step out of the current function"] = "除错运行 离开当前的函数", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step over"] = "除错运行 掠过子程序/函数", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop debugging and continue running the process"] = nil, -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop the currently running process"] = "终止目前进行着的进程", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Switch to or from full screen mode"] = "切换全屏模式", -- src\editor\menu_view.lua
+  ["Text not found."] = "寻找不到text", -- src\editor\findreplace.lua
+  ["The API file must be located in a subdirectory of the API directory."] = "API file必须存放在API文件夹中的子文件夹", -- src\editor\autocomplete.lua
+  ["Toggle Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Toggle Break&point"] = "切换中断点", -- src\editor\menu_project.lua
+  ["Toggle breakpoint"] = "切换中断点", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Tr&ace"] = "追踪", -- src\editor\menu_project.lua
+  ["Trace execution showing each executed line"] = "执行追踪展示每一执行过的语句", -- src\editor\menu_project.lua
+  ["Unable to create directory '%s'."] = nil, -- src\editor\filetree.lua
+  ["Unable to create file '%s'."] = nil, -- src\editor\filetree.lua
+  ["Unable to load file '%s'."] = "导出文件失败 '%s'.", -- src\editor\commands.lua
+  ["Unable to rename file '%s'."] = nil, -- src\editor\filetree.lua
+  ["Unable to save file '%s': %s"] = "保存文件失败 '%s': %s", -- src\editor\commands.lua
+  ["Unable to stop program (pid: %d), code %d."] = "停止程序失败 (pid: %d), 代码 %d.", -- src\editor\debugger.lua
+  ["Undo last edit"] = "清除前编辑动作", -- src\editor\menu_edit.lua
+  ["Use '%s' to see full description."] = "用 '%s' 来看全解析", -- src\editor\editor.lua
+  ["Use '%s' to show line endings and '%s' to convert them."] = "用 '%s' 来显示语句的终结和 '%s' 来进行转换", -- src\editor\commands.lua
+  ["Use 'clear' to clear the shell output and the history."] = "用 'clear' 来清除shell的输出和历史", -- src\editor\shellbox.lua
+  ["Use Shift-Enter for multiline code."] = "用 <Shift-Enter> 来处理多行代码", -- src\editor\shellbox.lua
+  ["Value"] = "数值", -- src\editor\debugger.lua
+  ["View the output/console window"] = "查看输出/主控台视窗", -- src\editor\menu_view.lua
+  ["View the project/filetree window"] = "查看项目/文件树视窗", -- src\editor\menu_view.lua
+  ["View the stack window"] = "查看堆栈视窗", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["View the watch window"] = "查看监视视窗", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["Watch"] = "监视", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Welcome to the interactive Lua interpreter."] = "欢迎来到互动 Lua interpreter.", -- src\editor\shellbox.lua
+  ["Wrap ar&ound"] = "卷绕", -- src\editor\findreplace.lua
+  ["You must save the program first."] = "必须先保存程序", -- src\editor\commands.lua
+  ["Zoom In"] = nil, -- src\editor\menu_view.lua
+  ["Zoom Out"] = nil, -- src\editor\menu_view.lua
+  ["Zoom to 100%"] = nil, -- src\editor\menu_view.lua
+  ["Zoom"] = nil, -- src\editor\menu_view.lua
+  ["on line %d"] = "在 %d 行", -- src\editor\debugger.lua, src\editor\editor.lua, src\editor\commands.lua
+  ["traced %d instruction"] = "追踪 %d 指令", -- src\editor\debugger.lua
+  ["unknown error"] = nil, -- src\editor\debugger.lua
+}

cfg/i18n/de.lua

@@ -0,0 +1,287 @@
+return {
+  [0] = function(c) return c == 1 and 1 or 2 end, -- plural
+  ["%d instance"] = {"%d Instanz", "%d Instanzen"}, -- src\editor\findreplace.lua
+  ["%s event failed: %s"] = "Ereignis fehlgeschlagen : %s", -- src\editor\package.lua
+  ["&About"] = "&Über", -- src\editor\menu_help.lua
+  ["&Add Watch"] = "&Beobachtungspunkt hinzufügen", -- src\editor\debugger.lua
+  ["&Break"] = "&Unterbrechung", -- src\editor\menu_project.lua
+  ["&Close Page"] = "S&eite schließen", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Community"] = "&Community", -- src\editor\menu_help.lua
+  ["&Compile"] = "&Compiler", -- src\editor\menu_project.lua
+  ["&Copy"] = "&Kopieren", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Default Layout"] = "Standard-&Layout", -- src\editor\menu_view.lua
+  ["&Delete Watch"] = "&Beobachtungspunkt entfernen", -- src\editor\debugger.lua
+  ["&Delete"] = "&Entfernen", -- src\editor\filetree.lua
+  ["&Documentation"] = "&Dokumentation", -- src\editor\menu_help.lua
+  ["&Down"] = "&Runter", -- src\editor\findreplace.lua
+  ["&Edit Project Directory"] = "Projektverzeichnis ändern", -- src\editor\filetree.lua
+  ["&Edit Watch"] = "&Beobachtungspunkt bearbeiten", -- src\editor\debugger.lua
+  ["&Edit"] = "&Bearbeiten", -- src\editor\menu_edit.lua
+  ["&File"] = "&Datei", -- src\editor\menu_file.lua
+  ["&Find All"] = "&Alle finden", -- src\editor\findreplace.lua
+  ["&Find Next"] = "&Nächsten finden", -- src\editor\findreplace.lua
+  ["&Find"] = "&Finden", -- src\editor\menu_search.lua
+  ["&Fold/Unfold All"] = "A&lles ein-/ausklappen", -- src\editor\menu_edit.lua
+  ["&Frequently Asked Questions"] = "&FAQ", -- src\editor\menu_help.lua
+  ["&Getting Started Guide"] = "&Anfängerleitfaden", -- src\editor\menu_help.lua
+  ["&Go To Line..."] = "&Gehe zu Zeile...", -- src\editor\menu_search.lua
+  ["&Help"] = "&Hilfe", -- src\editor\menu_help.lua
+  ["&New Directory"] = "&Neuer Ordner", -- src\editor\filetree.lua
+  ["&New"] = "&Neu", -- src\editor\menu_file.lua
+  ["&Open..."] = "&Öffnen...", -- src\editor\menu_file.lua
+  ["&Output/Console Window"] = "&Ausgabefenster/Konsole", -- src\editor\menu_view.lua
+  ["&Paste"] = "&Einfügen", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Project Page"] = "&Projektseite", -- src\editor\menu_help.lua
+  ["&Project"] = "&Projekt", -- src\editor\inspect.lua, src\editor\menu_project.lua
+  ["&Redo"] = "&Wiederholen", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Rename"] = "&Umbenennen", -- src\editor\filetree.lua
+  ["&Replace All"] = "&Alles ersetzen", -- src\editor\findreplace.lua
+  ["&Replace"] = "&Ersetzen", -- src\editor\findreplace.lua, src\editor\menu_search.lua
+  ["&Run"] = "&Starten", -- src\editor\menu_project.lua
+  ["&Save"] = "&Speichern", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Search"] = "&Suchen", -- src\editor\menu_search.lua
+  ["&Sort"] = "&Sortieren", -- src\editor\menu_edit.lua
+  ["&Stack Window"] = "&Stapel/Stack", -- src\editor\menu_view.lua
+  ["&Start Debugger Server"] = "De&bugserver starten", -- src\editor\menu_project.lua
+  ["&Status Bar"] = "S&tatuszeile", -- src\editor\menu_view.lua
+  ["&Subdirectories"] = "&Unterverzeichnisse", -- src\editor\findreplace.lua
+  ["&Tool Bar"] = "&Werkzeugleiste", -- src\editor\menu_view.lua
+  ["&Tutorials"] = "&Tutorien", -- src\editor\menu_help.lua
+  ["&Undo"] = "&Rückgängig", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Up"] = "&Hoch", -- src\editor\findreplace.lua
+  ["&View"] = "&Ansicht", -- src\editor\menu_view.lua
+  ["&Watch Window"] = "&Beobachtungspunkte", -- src\editor\menu_view.lua
+  [".&bak on Replace"] = ".&bak bei Ersetzen", -- src\editor\findreplace.lua
+  ["About %s"] = "Über %s", -- src\editor\menu_help.lua
+  ["Add To Scratchpad"] = "Zu Entwurf hinzufügen", -- src\editor\editor.lua
+  ["Add Watch Expression"] = "Beobachtungspunkt hinzufügen", -- src\editor\editor.lua
+  ["All files"] = "Alle Dateien", -- src\editor\commands.lua
+  ["Allow external process to start debugging"] = "Externem Prozeß erlauben, den Debugger zu starten", -- src\editor\menu_project.lua
+  ["Analyze the source code"] = "Quellcode analysieren", -- src\editor\inspect.lua
+  ["Analyze"] = "&Analyseroutine", -- src\editor\inspect.lua
+  ["Auto Complete Identifiers"] = "Auto-Vervollständigen von Bezeichnern", -- src\editor\menu_edit.lua
+  ["Auto complete while typing"] = "Auto-Vervollständigen beim Tippen", -- src\editor\menu_edit.lua
+  ["Bookmark"] = "Lese&zeichen", -- src\editor\menu_edit.lua
+  ["Break execution at the next executed line of code"] = "Programmausführung bei der nächsten ausgeführten Zeile stoppen", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["C&lear Output Window"] = "Ausgabefenster l&öschen", -- src\editor\menu_project.lua
+  ["C&omment/Uncomment"] = "(Aus-)/K&ommentieren", -- src\editor\menu_edit.lua
+  ["Can't debug the script in the active editor window."] = "Script kann im aktiven Editorfenster nicht gedebuggt werden.", -- src\editor\debugger.lua
+  ["Can't find file '%s' in the current project to activate for debugging. Update the project or open the file in the editor before debugging."] = "Kann Datei '%s' zwecks Debugging im aktuellen Projekt nicht finden. Bitte Projekt aktualisieren oder Datei in den Editor laden.", -- src\editor\debugger.lua
+  ["Can't process auto-recovery record; invalid format: %s."] = "Auto-Wiederherstellen nicht möglich; ungültiges Format: %s.", -- src\editor\commands.lua
+  ["Can't run the entry point script ('%s')."] = "Kann Script für Einsprungspunkt ('%s') nicht ausführen.", -- src\editor\debugger.lua
+  ["Can't start debugger server at %s:%d: %s."] = "Kann Debugserver nicht starten (%s:%d): %s.", -- src\editor\debugger.lua
+  ["Can't start debugging session due to internal error '%s'."] = "Debugging kann nicht gestartet werden wegen internem Fehler '%s'.", -- src\editor\debugger.lua
+  ["Can't start debugging without an opened file or with the current file not being saved ('%s')."] = "Debugging kann ohne geöffnete Datei nicht gestartet werden oder wenn die aktuelle Datei nicht gespeichert ist ('%s').", -- src\editor\debugger.lua
+  ["Can't stop debugger server as it is not started."] = "Kann Debugserver nicht stoppen wenn er vorher nicht gestartet wurde.", -- src\editor\debugger.lua
+  ["Cancel"] = "Abbrechen", -- src\editor\findreplace.lua
+  ["Cancelled by the user."] = "Durch Benutzer abgebrochen.", -- src\editor\findreplace.lua
+  ["Choose a project directory"] = "Projektverzeichnis auswählen", -- src\editor\findreplace.lua, src\editor\menu_project.lua, src\editor\gui.lua, src\editor\filetree.lua
+  ["Choose..."] = "Wählen...", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Clear Items"] = "Liste &löschen", -- src\editor\menu_file.lua
+  ["Clear items from this list"] = "Diese Liste löschen", -- src\editor\menu_file.lua
+  ["Clear the output window before compiling or debugging"] = "Vor Kompilieren oder Debuggen das Ausgabefenster löschen", -- src\editor\menu_project.lua
+  ["Close &Other Pages"] = "A&ndere Seiten schließen", -- src\editor\gui.lua
+  ["Close A&ll Pages"] = "&Alle Seiten schließen", -- src\editor\gui.lua
+  ["Close the current editor window"] = "Aktuelles Editorfenster schließen", -- src\editor\menu_file.lua
+  ["Co&ntinue"] = "&Fortsetzen", -- src\editor\menu_project.lua
+  ["Col: %d"] = "Spalte: %d", -- src\editor\editor.lua
+  ["Command Line Parameters..."] = "Kommandozeilenparameter...", -- src\editor\menu_project.lua
+  ["Command line parameters"] = "Kommandozeilenparameter", -- src\editor\menu_project.lua
+  ["Comment or uncomment current or selected lines"] = "Ausgewählte bzw. aktive Zeile (un-)kommentieren", -- src\editor\menu_edit.lua
+  ["Compilation error"] = "Fehler beim Kompilieren", -- src\editor\commands.lua, src\editor\debugger.lua
+  ["Compilation successful; %.0f%% success rate (%d/%d)."] = "Kompilieren erfolgreich; Erfolgsquote von %.0f%% (%d/%d).", -- src\editor\commands.lua
+  ["Compile the current file"] = "Aktuelle Datei kompilieren", -- src\editor\menu_project.lua
+  ["Complete &Identifier"] = "&Bezeichner vervollständigen", -- src\editor\menu_edit.lua
+  ["Complete the current identifier"] = " Aktuellen Bezeichner vervollständigen", -- src\editor\menu_edit.lua
+  ["Consider removing backslash from escape sequence '%s'."] = "Möglicherweise muß `\' aus '%s' entfernt werden.", -- src\editor\commands.lua
+  ["Copy Full Path"] = "Kopiere Pfadangabe", -- src\editor\filetree.lua
+  ["Copy selected text to clipboard"] = "Text in Zwischenablage kopieren", -- src\editor\menu_edit.lua
+  ["Couldn't activate file '%s' for debugging; continuing without it."] = "Konnte Datei '%s' zwecks nicht Debugging aktivieren; fahre ohne die Datei fort.", -- src\editor\debugger.lua
+  ["Create an empty document"] = "Leeres Dokument anlegen", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Cu&t"] = "A&usschneiden", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Cut selected text to clipboard"] = "Schneide ausgewählten Text in die Zwischenablage hinein", -- src\editor\menu_edit.lua
+  ["Debugger server started at %s:%d."] = "Debugserver gestartet als %s:%d.", -- src\editor\debugger.lua
+  ["Debugger server stopped at %s:%d."] = "Debugserver gestoppt als %s:%d.", -- src\editor\debugger.lua
+  ["Debugging session completed (%s)."] = "Debugging Session beendet (%s).", -- src\editor\debugger.lua
+  ["Debugging session started in '%s'."] = "Debugging Session gestartet '%s'.", -- src\editor\debugger.lua
+  ["Debugging suspended at %s:%s (couldn't activate the file)."] = "Debugging angehalten bei %s:%s (konnte Datei nicht aktivieren).", -- src\editor\debugger.lua
+  ["Detach &Process"] = "Prozeß abkoppeln", -- src\editor\menu_project.lua
+  ["Directory"] = "Verzeichnis", -- src\editor\findreplace.lua
+  ["Do you want to delete '%s'?"] = "Soll '%s' gelöscht werden?", -- src\editor\filetree.lua
+  ["Do you want to overwrite it?"] = "Überschreiben?", -- src\editor\commands.lua
+  ["Do you want to reload it?"] = "Neu laden?", -- src\editor\editor.lua
+  ["Do you want to save the changes to '%s'?"] = "Änderungen an '%s' speichern?", -- src\editor\commands.lua
+  ["E&xit"] = "&Beenden", -- src\editor\menu_file.lua
+  ["Enter Lua code and press Enter to run it."] = "Lua-Code eingeben und Enter drücken zum Ausführen.", -- src\editor\shellbox.lua
+  ["Enter command line parameters (use Cancel to clear)"] = "Kommandozeilenparameter eingeben (Cancel zum löschen)", -- src\editor\menu_project.lua
+  ["Enter line number"] = "Zeilennummer eingeben", -- src\editor\menu_search.lua
+  ["Error while loading API file: %s"] = "Fehler beim Laden von API-Datei: %s", -- src\editor\autocomplete.lua
+  ["Error while loading configuration file: %s"] = "Fehler beim Laden von Konfigurationsdatei: %s", -- src\editor\style.lua
+  ["Error while processing API file: %s"] = "Fehler beim Lesen von API-Datei: %s", -- src\editor\autocomplete.lua
+  ["Error while processing configuration file: %s"] = "Fehler beim Lesen von Konfiguratonsdatei: %s", -- src\editor\style.lua
+  ["Error"] = "Fehler", -- src\editor\commands.lua
+  ["Evaluate In Console"] = "In Konsole auswerten", -- src\editor\editor.lua
+  ["Execute the current project/file and keep updating the code to see immediate results"] = "Aktuelles Projekt/ aktuelle Datei ausführen und Quellcode ändern, um Ergebnisse in Echtzeit zu sehen", -- src\editor\menu_project.lua
+  ["Execute the current project/file"] = "Aktuelles Projekt/ aktuelle Datei ausführen", -- src\editor\menu_project.lua
+  ["Execution error"] = "Fehler bei Ausführung", -- src\editor\debugger.lua
+  ["Exit program"] = "Programm beenden", -- src\editor\menu_file.lua
+  ["Expr"] = "Ausdr.", -- src\editor\debugger.lua
+  ["Expression"] = "Ausdruck", -- src\editor\debugger.lua
+  ["File '%s' has been modified on disk."] = "Datei '%s' wurde auf der Festplatte geändert.", -- src\editor\editor.lua
+  ["File '%s' has more recent timestamp than restored '%s'; please review before saving."] = "Datei '%s' hat neueren Zeitstempel als wiederhergestellte Datei '%s'; bitte vor dem Speichern kontrollieren.", -- src\editor\commands.lua
+  ["File '%s' no longer exists."] = "Datei '%s' existiert nicht mehr.", -- src\editor\menu_file.lua, src\editor\editor.lua
+  ["File Type"] = "Dateityp", -- src\editor\findreplace.lua
+  ["File already exists."] = "Datei existiert bereits.", -- src\editor\commands.lua
+  ["File history"] = "Dateiverlauf", -- src\editor\menu_file.lua
+  ["Find &In Files"] = "Finde &in Dateien", -- src\editor\menu_search.lua
+  ["Find &Next"] = "Finde &Nächste", -- src\editor\menu_search.lua
+  ["Find &Previous"] = "Finde &Vorherige", -- src\editor\menu_search.lua
+  ["Find In Files"] = "Finde in Dateien", -- src\editor\findreplace.lua
+  ["Find and replace text in files"] = "Finde und ersetze Text in Dateien", -- src\editor\menu_search.lua
+  ["Find and replace text"] = "Finde und ersetze Text", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find text in files"] = "Finde Text in Dateien", -- src\editor\menu_search.lua
+  ["Find text"] = "Finde Text", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find the earlier text occurence"] = "Finde vorheriges Auftreten des Textes", -- src\editor\menu_search.lua
+  ["Find the next text occurrence"] = "Finde nächstes Auftreten des Textes", -- src\editor\menu_search.lua
+  ["Find"] = "Finden", -- src\editor\findreplace.lua
+  ["Fold or unfold all code folds"] = "Alle Stellen im Code ein-/ausklappen ", -- src\editor\menu_edit.lua
+  ["Found auto-recovery record and restored saved session."] = "Autowiederherstellen-Aufzeichnung gefunden und vorherige Sitzung wiederhergestellt.", -- src\editor\commands.lua
+  ["Found"] = "Gefunden", -- src\editor\findreplace.lua
+  ["Full &Screen"] = "&Vollbild", -- src\editor\menu_view.lua
+  ["Go To Definition"] = "Gehe zu Definition", -- src\editor\editor.lua
+  ["Go To Line"] = "Gehe zu Zeile", -- src\editor\menu_search.lua
+  ["Go To Next Bookmark"] = "Zu nächstem Lesezeichen", -- src\editor\menu_edit.lua
+  ["Go To Previous Bookmark"] = "Zu vorherigem Lesezeichen", -- src\editor\menu_edit.lua
+  ["Go to a selected line"] = "Gehe zu ausgewählter Zeile", -- src\editor\menu_search.lua
+  ["INS"] = "INS", -- src\editor\editor.lua
+  ["In Files"] = "In Dateien", -- src\editor\findreplace.lua
+  ["Jump to a function definition..."] = "Springe zu Funktions-Definition...", -- src\editor\editor.lua
+  ["Known Files"] = "Bekannte Dateien", -- src\editor\commands.lua
+  ["Ln: %d"] = "Zeile: %d", -- src\editor\editor.lua
+  ["Local console"] = "Lokale Konsole", -- src\editor\gui.lua, src\editor\shellbox.lua
+  ["Lua &Interpreter"] = "&Lua Interpreter", -- src\editor\menu_project.lua
+  ["Mapped remote request for '%s' to '%s'."] = "Mapped remote request for '%s' to '%s'.", -- src\editor\debugger.lua
+  ["Match &case"] = "&Groß-/Kleinschreibung", -- src\editor\findreplace.lua
+  ["Match &whole word"] = "Ganzes &Wort", -- src\editor\findreplace.lua
+  ["Mixed end-of-line encodings detected."] = "Gemischte End-of-Line Kodierung entdeckt.", -- src\editor\commands.lua
+  ["New &File"] = "Neue &Datei", -- src\editor\filetree.lua
+  ["OVR"] = "OVR", -- src\editor\editor.lua
+  ["Open With Default Program"] = "Mit Standardanwendung öffnen", -- src\editor\filetree.lua
+  ["Open an existing document"] = "Öffne existierendes Dokument", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Open file"] = "Öffne Datei", -- src\editor\commands.lua
+  ["Options"] = "Optionen", -- src\editor\findreplace.lua
+  ["Output (running)"] = "Ausgabe (ausgeführt)", -- src\editor\output.lua
+  ["Output"] = "Ausgabe", -- src\editor\gui.lua, src\editor\output.lua, src\editor\settings.lua
+  ["Paste text from the clipboard"] = "Text aus Zwischenablage einfügen", -- src\editor\menu_edit.lua
+  ["Preferences"] = "Einstellungen", -- src\editor\menu_edit.lua
+  ["Prepend '=' to show complex values on multiple lines."] = "'=' voranstellen, um komplexe Ausdrücke auf mehrere Zeilen zu verteilen.", -- src\editor\shellbox.lua
+  ["Press cancel to abort."] = "Abbrechen Drücken zum Beenden.", -- src\editor\commands.lua
+  ["Program '%s' started in '%s' (pid: %d)."] = "Programm '%s' gestartet in '%s' (pid : %d).", -- src\editor\output.lua
+  ["Program can't start because conflicting process is running as '%s'."] = "Programm kann nicht starten, da blockierender Prozeß als '%s' läuft.", -- src\editor\output.lua
+  ["Program completed in %.2f seconds (pid: %d)."] = "Programm beendet nach %.2f Sekunden (pid : %d).", -- src\editor\output.lua
+  ["Program starting as '%s'."] = "Programm gestartet als '%s'.", -- src\editor\output.lua
+  ["Program stopped (pid: %d)."] = "Programm gestoppt (pid: %d).", -- src\editor\debugger.lua
+  ["Program unable to run as '%s'."] = "Programm kann nicht als '%s' laufen.", -- src\editor\output.lua
+  ["Project Directory"] = "&Projektverzeichnis", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Project history"] = "Liste bisheriger Projekte", -- src\editor\menu_file.lua
+  ["Project"] = "Projekt", -- src\editor\gui.lua
+  ["Project/&FileTree Window"] = "&Projekt/Datei Fenster", -- src\editor\menu_view.lua
+  ["Provide command line parameters"] = "Kommandozeilenparameter angeben", -- src\editor\menu_project.lua
+  ["R/O"] = "R/O", -- src\editor\editor.lua
+  ["R/W"] = "R/W", -- src\editor\editor.lua
+  ["Re&place In Files"] = "Ersetze in &Dateien", -- src\editor\menu_search.lua
+  ["Recent &Projects"] = "Letzte &Projekte", -- src\editor\menu_file.lua
+  ["Recent Files"] = "Letzte Dateien", -- src\editor\menu_file.lua
+  ["Redo last edit undone"] = "Stelle letzte rückgängig gemachte Bearbeitung wieder her", -- src\editor\menu_edit.lua
+  ["Refused a request to start a new debugging session as there is one in progress already."] = "Starten einer neuen Debuggingsession abgelehnt, da bereits eine läuft.", -- src\editor\debugger.lua
+  ["Regular &expression"] = "&Regulärer Ausdruck", -- src\editor\findreplace.lua
+  ["Remote console"] = "Fensteuerungs-Konsole", -- src\editor\shellbox.lua
+  ["Rename All Instances"] = "Umbenennen aller Instanzen", -- src\editor\editor.lua
+  ["Replace A&ll"] = "A&lles ersetzen", -- src\editor\findreplace.lua
+  ["Replace"] = "Ersetzen", -- src\editor\findreplace.lua
+  ["Replaced an invalid UTF8 character with %s."] = "Unbekanntes UTF8-Symbol ersetzt mit %s.", -- src\editor\commands.lua
+  ["Replaced"] = "Ersetzt:", -- src\editor\findreplace.lua
+  ["Replacing"] = "Am Ersetzen", -- src\editor\findreplace.lua
+  ["Reset to default layout"] = "Standard-Layout wiederherstellen", -- src\editor\menu_view.lua
+  ["Run as Scratchpad"] = "Als &Entwurf starten", -- src\editor\menu_project.lua
+  ["S&top Debugging"] = "Debugging a&nhalten", -- src\editor\menu_project.lua
+  ["S&top Process"] = "Prozeß &anhalten", -- src\editor\menu_project.lua
+  ["Save &As..."] = "S&peichern als...", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save A&ll"] = "&Alle Speichern", -- src\editor\menu_file.lua
+  ["Save Changes?"] = "Änderungen speichern?", -- src\editor\commands.lua
+  ["Save all open documents"] = "Alle offenen Dokumente speichern", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save file as"] = "Datei speichern als", -- src\editor\commands.lua
+  ["Save file?"] = "Datei speichern?", -- src\editor\commands.lua
+  ["Save the current document to a file with a new name"] = "Aktuelles Dokument unter neuem Namen speichern", -- src\editor\menu_file.lua
+  ["Save the current document"] = "Aktuelles Dokument speichern", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Saved auto-recover at %s."] = "%s Autowiederherstellen gespeichert.", -- src\editor\commands.lua
+  ["Scope"] = "Richtung", -- src\editor\findreplace.lua
+  ["Scratchpad error"] = "Fehler im Entwurf", -- src\editor\debugger.lua
+  ["Searching for"] = "Suchen nach", -- src\editor\findreplace.lua
+  ["Sel: %d/%d"] = "Ausgew.: %d/%d", -- src\editor\editor.lua
+  ["Select &All"] = "&Alles Auswählen", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Select all text in the editor"] = "Kompletten Text im Editor auswählen", -- src\editor\menu_edit.lua
+  ["Select and Find Next"] = "Auswählen und nächstes finden", -- src\editor\menu_search.lua
+  ["Select and Find Previous"] = "Auswählen und vorheriges finden", -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its next occurrence"] = "Wort unter dem Cursor auswählen und nächstes Auftauchen finden", -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its previous occurrence"] = "Wort unter dem Cursor auswählen und vorheriges Auftauchen finden", -- src\editor\menu_search.lua
+  ["Set From Current File"] = "Anhand der aktuellen Datei festlegen", -- src\editor\menu_project.lua
+  ["Set project directory from current file"] = "Lege Projektverzeichnis anhand der aktuellen Datei fest", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Set the interpreter to be used"] = "Wähle zu benutzenden Interpreter aus", -- src\editor\menu_project.lua
+  ["Set the project directory to be used"] = "Lege zu benutzendes Projektverzeichnis fest", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Settings: System"] = "Einstellungen: System", -- src\editor\menu_edit.lua
+  ["Settings: User"] = "Einstellungen: Nutzer", -- src\editor\menu_edit.lua
+  ["Show &Tooltip"] = "&Tooltip zeigen", -- src\editor\menu_edit.lua
+  ["Show Location"] = "Ordner öffnen", -- src\editor\gui.lua, src\editor\filetree.lua
+  ["Show tooltip for current position; place cursor after opening bracket of function"] = "Zeige Tooltip für aktuelle Position; setze Cursor hinter die öffnende Klammer der Funktion", -- src\editor\menu_edit.lua
+  ["Show/Hide the status bar"] = "Statuszeile zeigen/verstecken", -- src\editor\menu_view.lua
+  ["Show/Hide the toolbar"] = "Werkzeugleiste zeigen/verstecken", -- src\editor\menu_view.lua
+  ["Sort selected lines"] = "Ausgewählte Zeilen sortieren", -- src\editor\menu_edit.lua
+  ["Stack"] = "Stack", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Start &Debugging"] = "&Debugging starten", -- src\editor\menu_project.lua
+  ["Start or Continue debugging"] = "Debuggen starten/fortsetzen", -- src\editor\gui.lua
+  ["Start or continue debugging"] = "Debuggen starten/fortsetzen", -- src\editor\menu_project.lua
+  ["Step &Into"] = "Schritt h&inein", -- src\editor\menu_project.lua
+  ["Step &Over"] = "&Überspringen", -- src\editor\menu_project.lua
+  ["Step O&ut"] = "Schritt &raus", -- src\editor\menu_project.lua
+  ["Step into"] = "Schritt hinein", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step out of the current function"] = "Schritt aus der aktuellen Funktion heraus", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step over"] = "Überspringen", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop debugging and continue running the process"] = "Beende debuggen und setze den Prozeß fort", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop the currently running process"] = "Aktuell laufenden Prozeß stoppen", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Switch to or from full screen mode"] = "Vollbild an/aus", -- src\editor\menu_view.lua
+  ["Text not found."] = "Text nicht gefunden.", -- src\editor\findreplace.lua
+  ["The API file must be located in a subdirectory of the API directory."] = "Die API-Datei muß sich in einem Unterverzeichnis des API-Vereichnisses befinden.", -- src\editor\autocomplete.lua
+  ["Toggle Bookmark"] = "Lesezeichen setzen/löschen", -- src\editor\menu_edit.lua
+  ["Toggle Break&point"] = "&Haltepunkt an/aus", -- src\editor\menu_project.lua
+  ["Toggle breakpoint"] = "Haltepunkt an/aus", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Tr&ace"] = "Ablauf &verfolgen", -- src\editor\menu_project.lua
+  ["Trace execution showing each executed line"] = "Ablaufverfolgung zeigt jede ausgeführte Zeile an", -- src\editor\menu_project.lua
+  ["Unable to create directory '%s'."] = "Kann kein Verzeichnis '%s' erstellen.", -- src\editor\filetree.lua
+  ["Unable to create file '%s'."] = "Kann Datei '%s' nicht erstellen.", -- src\editor\filetree.lua
+  ["Unable to load file '%s'."] = "Scheitern beim Laden von Datei '%s'.", -- src\editor\commands.lua
+  ["Unable to rename file '%s'."] = "Kann Datei '%s' nicht umbenennen.", -- src\editor\filetree.lua
+  ["Unable to save file '%s': %s"] = "Scheitern beim Speichern von Datei '%s' : %s", -- src\editor\commands.lua
+  ["Unable to stop program (pid: %d), code %d."] = "Scheitern beim Stoppen des Prozesses (pid : %d), code %d.", -- src\editor\debugger.lua
+  ["Undo last edit"] = "Letzte Änderung rückgängig machen", -- src\editor\menu_edit.lua
+  ["Use '%s' to see full description."] = "'%s' für eine komplette Beschreibung.", -- src\editor\editor.lua
+  ["Use '%s' to show line endings and '%s' to convert them."] = "'%s' um Zeilenende-Codes zu sehen, und '%s' um sie zu konvertieren.", -- src\editor\commands.lua
+  ["Use 'clear' to clear the shell output and the history."] = "'clear' um Ausgabefenster und Verlauf zu löschen.", -- src\editor\shellbox.lua
+  ["Use Shift-Enter for multiline code."] = "<Umsch-Eingabetaste> für Code in mehreren Zeilen.", -- src\editor\shellbox.lua
+  ["Value"] = "Wert", -- src\editor\debugger.lua
+  ["View the output/console window"] = "Ausgabe-/Konsolenfenster ansehen", -- src\editor\menu_view.lua
+  ["View the project/filetree window"] = "Projekt-/Dateifenster ansehen", -- src\editor\menu_view.lua
+  ["View the stack window"] = "Stapel/Stack-Fenster ansehen", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["View the watch window"] = "Fenster für Beobachtungspunkte ansehen", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["Watch"] = "Beobachtungspunkte", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Welcome to the interactive Lua interpreter."] = "Willkommen zum interaktiven Lua-Interpretr!", -- src\editor\shellbox.lua
+  ["Wrap ar&ound"] = "Am Anfang fortsetzen", -- src\editor\findreplace.lua
+  ["You must save the program first."] = "Erst das Programm speichern.", -- src\editor\commands.lua
+  ["Zoom In"] = "Hineinzoomen", -- src\editor\menu_view.lua
+  ["Zoom Out"] = "Herauszoomen", -- src\editor\menu_view.lua
+  ["Zoom to 100%"] = "Zoom zurücksetzen (100%)", -- src\editor\menu_view.lua
+  ["Zoom"] = "Zoom", -- src\editor\menu_view.lua
+  ["on line %d"] = "in Zeile %d", -- src\editor\debugger.lua, src\editor\editor.lua, src\editor\commands.lua
+  ["traced %d instruction"] = {"%d Anweisung verfolgt", "%d Anweisungen verfolgt"}, -- src\editor\debugger.lua
+  ["unknown error"] = "Unbekannter Fehler", -- src\editor\debugger.lua
+}

cfg/i18n/en.lua

@@ -0,0 +1,5 @@
+return {
+  [0] = function(c) return c == 1 and 1 or 2 end, -- plural
+  ["traced %d instruction"] = {"traced %d instruction", "traced %d instructions"}, -- src\editor\debugger.lua
+  ["%d instance"] = {"%d instance", "%d instances"}, -- src\editor\findreplace.lua
+}

cfg/i18n/es.lua

@@ -0,0 +1,288 @@
+-- Traducción realiazada por Iñigo Sola
+return {
+  [0] = function(c) return c == 1 and 1 or 2 end, -- plural
+  ["%d instance"] = nil, -- src\editor\findreplace.lua
+  ["%s event failed: %s"] = nil, -- src\editor\package.lua
+  ["&About"] = "&Acerca de...", -- src\editor\menu_help.lua
+  ["&Add Watch"] = "Añadir observación", -- src\editor\debugger.lua
+  ["&Break"] = "Ruptura", -- src\editor\menu_project.lua
+  ["&Close Page"] = "Cerrar página", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Community"] = nil, -- src\editor\menu_help.lua
+  ["&Compile"] = "Compilar", -- src\editor\menu_project.lua
+  ["&Copy"] = "Copiar", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Default Layout"] = "Diseño por defecto", -- src\editor\menu_view.lua
+  ["&Delete Watch"] = "Eliminar observación", -- src\editor\debugger.lua
+  ["&Delete"] = nil, -- src\editor\filetree.lua
+  ["&Documentation"] = nil, -- src\editor\menu_help.lua
+  ["&Down"] = nil, -- src\editor\findreplace.lua
+  ["&Edit Project Directory"] = nil, -- src\editor\filetree.lua
+  ["&Edit Watch"] = "Editar observación", -- src\editor\debugger.lua
+  ["&Edit"] = "Editar", -- src\editor\menu_edit.lua
+  ["&File"] = "Archivo", -- src\editor\menu_file.lua
+  ["&Find All"] = nil, -- src\editor\findreplace.lua
+  ["&Find Next"] = nil, -- src\editor\findreplace.lua
+  ["&Find"] = "Buscar", -- src\editor\menu_search.lua
+  ["&Fold/Unfold All"] = "Plegar/desplegar todo", -- src\editor\menu_edit.lua
+  ["&Frequently Asked Questions"] = nil, -- src\editor\menu_help.lua
+  ["&Getting Started Guide"] = nil, -- src\editor\menu_help.lua
+  ["&Go To Line..."] = "Ir a línea...", -- src\editor\menu_search.lua
+  ["&Help"] = "Ayuda", -- src\editor\menu_help.lua
+  ["&New Directory"] = nil, -- src\editor\filetree.lua
+  ["&New"] = "&Nuevo", -- src\editor\menu_file.lua
+  ["&Open..."] = "&Abrir...", -- src\editor\menu_file.lua
+  ["&Output/Console Window"] = "Salida/Consola", -- src\editor\menu_view.lua
+  ["&Paste"] = "Pegar", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Project Page"] = nil, -- src\editor\menu_help.lua
+  ["&Project"] = "Proyecto", -- src\editor\inspect.lua, src\editor\menu_project.lua
+  ["&Redo"] = "Rehacer", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Rename"] = nil, -- src\editor\filetree.lua
+  ["&Replace All"] = nil, -- src\editor\findreplace.lua
+  ["&Replace"] = "Remplazar", -- src\editor\findreplace.lua, src\editor\menu_search.lua
+  ["&Run"] = "Ejecutar", -- src\editor\menu_project.lua
+  ["&Save"] = "Guardar", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Search"] = "Buscar", -- src\editor\menu_search.lua
+  ["&Sort"] = "Clasificar", -- src\editor\menu_edit.lua
+  ["&Stack Window"] = "Ventana de la pila de ejecución", -- src\editor\menu_view.lua
+  ["&Start Debugger Server"] = "Lanzar servidor de depuración", -- src\editor\menu_project.lua
+  ["&Status Bar"] = nil, -- src\editor\menu_view.lua
+  ["&Subdirectories"] = nil, -- src\editor\findreplace.lua
+  ["&Tool Bar"] = nil, -- src\editor\menu_view.lua
+  ["&Tutorials"] = nil, -- src\editor\menu_help.lua
+  ["&Undo"] = "Deshacer", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Up"] = nil, -- src\editor\findreplace.lua
+  ["&View"] = "Ver", -- src\editor\menu_view.lua
+  ["&Watch Window"] = "Ventana de observaciones", -- src\editor\menu_view.lua
+  [".&bak on Replace"] = nil, -- src\editor\findreplace.lua
+  ["About %s"] = "Acerca de %s", -- src\editor\menu_help.lua
+  ["Add To Scratchpad"] = "Añadir al borrador", -- src\editor\editor.lua
+  ["Add Watch Expression"] = "Añadir expresión de observación", -- src\editor\editor.lua
+  ["All files"] = "Todos los archivos", -- src\editor\commands.lua
+  ["Allow external process to start debugging"] = "Permitir proceso externo para iniciar depuración", -- src\editor\menu_project.lua
+  ["Analyze the source code"] = "Analizar el código fuente", -- src\editor\inspect.lua
+  ["Analyze"] = "Analizar", -- src\editor\inspect.lua
+  ["Auto Complete Identifiers"] = "Autocompletar identificadores", -- src\editor\menu_edit.lua
+  ["Auto complete while typing"] = "Autocompletar mientras se escribe", -- src\editor\menu_edit.lua
+  ["Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Break execution at the next executed line of code"] = "Parar ejecución en la siguiente línea de código", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["C&lear Output Window"] = "Limpiar ventana de Salida", -- src\editor\menu_project.lua
+  ["C&omment/Uncomment"] = "Comentar/descomentar", -- src\editor\menu_edit.lua
+  ["Can't debug the script in the active editor window."] = "No se puede depurar el script en la ventana activa del editor", -- src\editor\debugger.lua
+  ["Can't find file '%s' in the current project to activate for debugging. Update the project or open the file in the editor before debugging."] = "No se puede encontrar el archivo '%s' en el proyecto actual para activar la depuración. Actualiza el proyecto o abre el archivo en el editor antes de depurar.", -- src\editor\debugger.lua
+  ["Can't process auto-recovery record; invalid format: %s."] = "No se puede procesar la autorrecuperación; formato inválido: %s.", -- src\editor\commands.lua
+  ["Can't run the entry point script ('%s')."] = "No se pude ejecutar el punto de entrada del script (%s).", -- src\editor\debugger.lua
+  ["Can't start debugger server at %s:%d: %s."] = nil, -- src\editor\debugger.lua
+  ["Can't start debugging session due to internal error '%s'."] = "No se puede iniciar la sesión de depuración debido a un error interno '%s'.'", -- src\editor\debugger.lua
+  ["Can't start debugging without an opened file or with the current file not being saved ('%s')."] = "No se puede iniciar la depuración sin abrir un archivo o si no ha sido guardado ('%s').", -- src\editor\debugger.lua
+  ["Can't stop debugger server as it is not started."] = nil, -- src\editor\debugger.lua
+  ["Cancel"] = nil, -- src\editor\findreplace.lua
+  ["Cancelled by the user."] = nil, -- src\editor\findreplace.lua
+  ["Choose a project directory"] = "Elegir el directorio del proyecto", -- src\editor\findreplace.lua, src\editor\menu_project.lua, src\editor\gui.lua, src\editor\filetree.lua
+  ["Choose..."] = nil, -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Clear Items"] = nil, -- src\editor\menu_file.lua
+  ["Clear items from this list"] = nil, -- src\editor\menu_file.lua
+  ["Clear the output window before compiling or debugging"] = "Limpiar la ventana de salida antes de compilar o depurar", -- src\editor\menu_project.lua
+  ["Close &Other Pages"] = nil, -- src\editor\gui.lua
+  ["Close A&ll Pages"] = nil, -- src\editor\gui.lua
+  ["Close the current editor window"] = "Cerrar la ventana actual del editor", -- src\editor\menu_file.lua
+  ["Co&ntinue"] = "Continuar", -- src\editor\menu_project.lua
+  ["Col: %d"] = "Col: %d", -- src\editor\editor.lua
+  ["Command Line Parameters..."] = nil, -- src\editor\menu_project.lua
+  ["Command line parameters"] = nil, -- src\editor\menu_project.lua
+  ["Comment or uncomment current or selected lines"] = {"Comentar o descomentar la línea activa (seleccionada)","Comentar o descomentar las líneas activas (seleccionadas)"}, -- src\editor\menu_edit.lua
+  ["Compilation error"] = "Error de compilación", -- src\editor\commands.lua, src\editor\debugger.lua
+  ["Compilation successful; %.0f%% success rate (%d/%d)."] = "Compilación exitosa; factor de éxito: %.0f%% (%d/%d).", -- src\editor\commands.lua
+  ["Compile the current file"] = "Compilar el archivo actual", -- src\editor\menu_project.lua
+  ["Complete &Identifier"] = "Completar identificador", -- src\editor\menu_edit.lua
+  ["Complete the current identifier"] = "Completar el actual identificador", -- src\editor\menu_edit.lua
+  ["Consider removing backslash from escape sequence '%s'."] = nil, -- src\editor\commands.lua
+  ["Copy Full Path"] = nil, -- src\editor\filetree.lua
+  ["Copy selected text to clipboard"] = "Copiar el texto seleccionado al portapapeles", -- src\editor\menu_edit.lua
+  ["Couldn't activate file '%s' for debugging; continuing without it."] = "No se pudo activar el archivo '%s' para la depuración; continuar sin él.", -- src\editor\debugger.lua
+  ["Create an empty document"] = "Crear un documento en blanco", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Cu&t"] = "Cortar", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Cut selected text to clipboard"] = "Cortar el texto selecionado al portapapeles", -- src\editor\menu_edit.lua
+  ["Debugger server started at %s:%d."] = "Servidor de depuración inciado en %s:%s", -- src\editor\debugger.lua
+  ["Debugger server stopped at %s:%d."] = nil, -- src\editor\debugger.lua
+  ["Debugging session completed (%s)."] = "Sesión de depuración completada (%s).", -- src\editor\debugger.lua
+  ["Debugging session started in '%s'."] = "Sesión de depuración iniciada en '%s'.", -- src\editor\debugger.lua
+  ["Debugging suspended at %s:%s (couldn't activate the file)."] = nil, -- src\editor\debugger.lua
+  ["Detach &Process"] = nil, -- src\editor\menu_project.lua
+  ["Directory"] = nil, -- src\editor\findreplace.lua
+  ["Do you want to delete '%s'?"] = nil, -- src\editor\filetree.lua
+  ["Do you want to overwrite it?"] = nil, -- src\editor\commands.lua
+  ["Do you want to reload it?"] = "¿Quieres recargarlo?", -- src\editor\editor.lua
+  ["Do you want to save the changes to '%s'?"] = "¿Quieres guardar los cambios en '%s'?", -- src\editor\commands.lua
+  ["E&xit"] = "Salir", -- src\editor\menu_file.lua
+  ["Enter Lua code and press Enter to run it."] = "Introduce código Lua y pulsa <Entrer> para ejecutarlo.", -- src\editor\shellbox.lua
+  ["Enter command line parameters (use Cancel to clear)"] = nil, -- src\editor\menu_project.lua
+  ["Enter line number"] = "Introduce número de línea", -- src\editor\menu_search.lua
+  ["Error while loading API file: %s"] = "Error mientras se cargaba el archivo de API: %s", -- src\editor\autocomplete.lua
+  ["Error while loading configuration file: %s"] = nil, -- src\editor\style.lua
+  ["Error while processing API file: %s"] = "Error mientras se procesaba el archivo de API: %s", -- src\editor\autocomplete.lua
+  ["Error while processing configuration file: %s"] = nil, -- src\editor\style.lua
+  ["Error"] = "Error", -- src\editor\commands.lua
+  ["Evaluate In Console"] = "Evaluar en consola", -- src\editor\editor.lua
+  ["Execute the current project/file and keep updating the code to see immediate results"] = "Ejecutar el proyecto/archivo actual y manteniendo actualizado el código para ver resultados en tiempo real", -- src\editor\menu_project.lua
+  ["Execute the current project/file"] = "Ejecutar el proyecto/archivo actual", -- src\editor\menu_project.lua
+  ["Execution error"] = "Error de ejecución", -- src\editor\debugger.lua
+  ["Exit program"] = "Salir del programa", -- src\editor\menu_file.lua
+  ["Expr"] = "Expr.", -- src\editor\debugger.lua
+  ["Expression"] = "Expresión", -- src\editor\debugger.lua
+  ["File '%s' has been modified on disk."] = "El archivo '%s' ha sido modificado en el disco.", -- src\editor\editor.lua
+  ["File '%s' has more recent timestamp than restored '%s'; please review before saving."] = "El archivo '%s' tiene una fecha más reciente que el restaurado '%s'; por favor, revísalo antes de guardar.", -- src\editor\commands.lua
+  ["File '%s' no longer exists."] = "El archivo '%s' no existe.", -- src\editor\menu_file.lua, src\editor\editor.lua
+  ["File Type"] = nil, -- src\editor\findreplace.lua
+  ["File already exists."] = nil, -- src\editor\commands.lua
+  ["File history"] = "Historial de archivos", -- src\editor\menu_file.lua
+  ["Find &In Files"] = "Buscar en archivos", -- src\editor\menu_search.lua
+  ["Find &Next"] = "Buscar siguiente", -- src\editor\menu_search.lua
+  ["Find &Previous"] = "Buscar anterior", -- src\editor\menu_search.lua
+  ["Find In Files"] = nil, -- src\editor\findreplace.lua
+  ["Find and replace text in files"] = "Buscar y remplazar texto en archivos", -- src\editor\menu_search.lua
+  ["Find and replace text"] = "Buscar y rempleazar texto", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find text in files"] = "Buscar texto en archivos", -- src\editor\menu_search.lua
+  ["Find text"] = "Buscar texto", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find the earlier text occurence"] = "Buscar la anterior aparición del texto", -- src\editor\menu_search.lua
+  ["Find the next text occurrence"] = "Buscar la siguiente aparecición del texto", -- src\editor\menu_search.lua
+  ["Find"] = nil, -- src\editor\findreplace.lua
+  ["Fold or unfold all code folds"] = "Plegar o desplegar todo el código plegado", -- src\editor\menu_edit.lua
+  ["Found auto-recovery record and restored saved session."] = "Encontrada autorrecuperación y sesión restaurada.", -- src\editor\commands.lua
+  ["Found"] = nil, -- src\editor\findreplace.lua
+  ["Full &Screen"] = "Pantalla completa", -- src\editor\menu_view.lua
+  ["Go To Definition"] = nil, -- src\editor\editor.lua
+  ["Go To Line"] = "Ir a línea", -- src\editor\menu_search.lua
+  ["Go To Next Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Go To Previous Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Go to a selected line"] = "Ir a línea seleccionada", -- src\editor\menu_search.lua
+  ["INS"] = "INS", -- src\editor\editor.lua
+  ["In Files"] = nil, -- src\editor\findreplace.lua
+  ["Jump to a function definition..."] = "Saltar a la definición de la función...", -- src\editor\editor.lua
+  ["Known Files"] = "Archivos conocidos", -- src\editor\commands.lua
+  ["Ln: %d"] = "Ln: %d", -- src\editor\editor.lua
+  ["Local console"] = "Consola local", -- src\editor\gui.lua, src\editor\shellbox.lua
+  ["Lua &Interpreter"] = "Intérprete Lua", -- src\editor\menu_project.lua
+  ["Mapped remote request for '%s' to '%s'."] = nil, -- src\editor\debugger.lua
+  ["Match &case"] = nil, -- src\editor\findreplace.lua
+  ["Match &whole word"] = nil, -- src\editor\findreplace.lua
+  ["Mixed end-of-line encodings detected."] = nil, -- src\editor\commands.lua
+  ["New &File"] = nil, -- src\editor\filetree.lua
+  ["OVR"] = "OVR", -- src\editor\editor.lua
+  ["Open With Default Program"] = nil, -- src\editor\filetree.lua
+  ["Open an existing document"] = "Abrir un documento existente", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Open file"] = "Abrir archivo", -- src\editor\commands.lua
+  ["Options"] = nil, -- src\editor\findreplace.lua
+  ["Output (running)"] = "Salida (en ejecución)", -- src\editor\output.lua
+  ["Output"] = "Salida", -- src\editor\gui.lua, src\editor\output.lua, src\editor\settings.lua
+  ["Paste text from the clipboard"] = "Pegar texto desde el portapapeles", -- src\editor\menu_edit.lua
+  ["Preferences"] = nil, -- src\editor\menu_edit.lua
+  ["Prepend '=' to show complex values on multiple lines."] = "Antepón '=' para ver valores complejos en líneas múltiples", -- src\editor\shellbox.lua
+  ["Press cancel to abort."] = "Presiona cancelar para abortar.", -- src\editor\commands.lua
+  ["Program '%s' started in '%s' (pid: %d)."] = "Programa '%s' iniciado en '%s' (pid: %d).", -- src\editor\output.lua
+  ["Program can't start because conflicting process is running as '%s'."] = "El programa no puede iniciarse porque hay un proceso conflictivo en ejecución como '%s'.", -- src\editor\output.lua
+  ["Program completed in %.2f seconds (pid: %d)."] = "Programa completado en %.2f segundos (pid: %d).", -- src\editor\output.lua
+  ["Program starting as '%s'."] = "Programa iniciado como '%s'.", -- src\editor\output.lua
+  ["Program stopped (pid: %d)."] = "Programa parado (pid: %d).", -- src\editor\debugger.lua
+  ["Program unable to run as '%s'."] = "No se puede ejecutar el programa como '%s'.", -- src\editor\output.lua
+  ["Project Directory"] = nil, -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Project history"] = nil, -- src\editor\menu_file.lua
+  ["Project"] = "Proyecto", -- src\editor\gui.lua
+  ["Project/&FileTree Window"] = "Ventana de proyecto/árbol de archivos", -- src\editor\menu_view.lua
+  ["Provide command line parameters"] = nil, -- src\editor\menu_project.lua
+  ["R/O"] = "R/O", -- src\editor\editor.lua
+  ["R/W"] = "R/W", -- src\editor\editor.lua
+  ["Re&place In Files"] = "Remplazar en archivos", -- src\editor\menu_search.lua
+  ["Recent &Projects"] = nil, -- src\editor\menu_file.lua
+  ["Recent Files"] = "Archivos recientes", -- src\editor\menu_file.lua
+  ["Redo last edit undone"] = "Rehacer la última edición deshecha", -- src\editor\menu_edit.lua
+  ["Refused a request to start a new debugging session as there is one in progress already."] = "No se pudo lanzar una nueva sesión de depuración porque ya hay una en curso.", -- src\editor\debugger.lua
+  ["Regular &expression"] = nil, -- src\editor\findreplace.lua
+  ["Remote console"] = "Consola remota", -- src\editor\shellbox.lua
+  ["Rename All Instances"] = nil, -- src\editor\editor.lua
+  ["Replace A&ll"] = nil, -- src\editor\findreplace.lua
+  ["Replace"] = nil, -- src\editor\findreplace.lua
+  ["Replaced an invalid UTF8 character with %s."] = nil, -- src\editor\commands.lua
+  ["Replaced"] = nil, -- src\editor\findreplace.lua
+  ["Replacing"] = nil, -- src\editor\findreplace.lua
+  ["Reset to default layout"] = "Restablecer el diseño por defecto", -- src\editor\menu_view.lua
+  ["Run as Scratchpad"] = "Ejecutar como borrador", -- src\editor\menu_project.lua
+  ["S&top Debugging"] = "Parar depuración", -- src\editor\menu_project.lua
+  ["S&top Process"] = "Parar proceso", -- src\editor\menu_project.lua
+  ["Save &As..."] = "Guardar como...", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save A&ll"] = "Guardar todo", -- src\editor\menu_file.lua
+  ["Save Changes?"] = "¿Guardar cambios?", -- src\editor\commands.lua
+  ["Save all open documents"] = "Guardar todos los documentos abiertos", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save file as"] = "Guardar archivo como", -- src\editor\commands.lua
+  ["Save file?"] = "¿Guardar archivo?", -- src\editor\commands.lua
+  ["Save the current document to a file with a new name"] = "Guardar el documento actual en un archivo con un nombre nuevo", -- src\editor\menu_file.lua
+  ["Save the current document"] = "Guardar el documento actual", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Saved auto-recover at %s."] = "Guardar autorrecuperación en %s.", -- src\editor\commands.lua
+  ["Scope"] = nil, -- src\editor\findreplace.lua
+  ["Scratchpad error"] = "Error en el borrador", -- src\editor\debugger.lua
+  ["Searching for"] = nil, -- src\editor\findreplace.lua
+  ["Sel: %d/%d"] = nil, -- src\editor\editor.lua
+  ["Select &All"] = "Seleccionar todo", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Select all text in the editor"] = "Seleccionar todo el texto en el editor", -- src\editor\menu_edit.lua
+  ["Select and Find Next"] = nil, -- src\editor\menu_search.lua
+  ["Select and Find Previous"] = nil, -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its next occurrence"] = nil, -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its previous occurrence"] = nil, -- src\editor\menu_search.lua
+  ["Set From Current File"] = nil, -- src\editor\menu_project.lua
+  ["Set project directory from current file"] = "Establecer el directorio del proyecto del archivo actual", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Set the interpreter to be used"] = "Establecer el intérprete a ser usado", -- src\editor\menu_project.lua
+  ["Set the project directory to be used"] = nil, -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Settings: System"] = nil, -- src\editor\menu_edit.lua
+  ["Settings: User"] = nil, -- src\editor\menu_edit.lua
+  ["Show &Tooltip"] = "Ver tooltip", -- src\editor\menu_edit.lua
+  ["Show Location"] = nil, -- src\editor\gui.lua, src\editor\filetree.lua
+  ["Show tooltip for current position; place cursor after opening bracket of function"] = "Ver tooltip para la posición actual; posicionar el cursor después de abrir el paréntisis de los argumentos de la función", -- src\editor\menu_edit.lua
+  ["Show/Hide the status bar"] = nil, -- src\editor\menu_view.lua
+  ["Show/Hide the toolbar"] = nil, -- src\editor\menu_view.lua
+  ["Sort selected lines"] = "Clasificar las líneas seleccionadas", -- src\editor\menu_edit.lua
+  ["Stack"] = nil, -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Start &Debugging"] = "Comenzar depuración", -- src\editor\menu_project.lua
+  ["Start or Continue debugging"] = nil, -- src\editor\gui.lua
+  ["Start or continue debugging"] = nil, -- src\editor\menu_project.lua
+  ["Step &Into"] = "Paso dentro", -- src\editor\menu_project.lua
+  ["Step &Over"] = "Paso sin entrar", -- src\editor\menu_project.lua
+  ["Step O&ut"] = "Paso fuera", -- src\editor\menu_project.lua
+  ["Step into"] = "Paso dentro", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step out of the current function"] = "Hasta salir de la función actual", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step over"] = "Paso sin entrar", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop debugging and continue running the process"] = nil, -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop the currently running process"] = "Parar el proceso en ejecución", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Switch to or from full screen mode"] = "Conmutar el modo de pantalla completa", -- src\editor\menu_view.lua
+  ["Text not found."] = nil, -- src\editor\findreplace.lua
+  ["The API file must be located in a subdirectory of the API directory."] = "El archivo de API debe ser almacenado en un subdirectorio del directorio de API.", -- src\editor\autocomplete.lua
+  ["Toggle Bookmark"] = nil, -- src\editor\menu_edit.lua
+  ["Toggle Break&point"] = "Conmutar punto de ruptura", -- src\editor\menu_project.lua
+  ["Toggle breakpoint"] = "Conmutar punto de ruptura", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Tr&ace"] = "Traza", -- src\editor\menu_project.lua
+  ["Trace execution showing each executed line"] = "Traza de ejecución mostrando cada línea ejecutada", -- src\editor\menu_project.lua
+  ["Unable to create directory '%s'."] = nil, -- src\editor\filetree.lua
+  ["Unable to create file '%s'."] = nil, -- src\editor\filetree.lua
+  ["Unable to load file '%s'."] = "No se pudo cargar el archivo '%s'.", -- src\editor\commands.lua
+  ["Unable to rename file '%s'."] = nil, -- src\editor\filetree.lua
+  ["Unable to save file '%s': %s"] = "No se pudo guardar el archivo '%s': %s", -- src\editor\commands.lua
+  ["Unable to stop program (pid: %d), code %d."] = "No se puedo parar el programa (pid: %d), código %d.", -- src\editor\debugger.lua
+  ["Undo last edit"] = "Deshacer la última edición", -- src\editor\menu_edit.lua
+  ["Use '%s' to see full description."] = nil, -- src\editor\editor.lua
+  ["Use '%s' to show line endings and '%s' to convert them."] = nil, -- src\editor\commands.lua
+  ["Use 'clear' to clear the shell output and the history."] = "Usa 'clear' para limpiar la consola de salida y el historial.", -- src\editor\shellbox.lua
+  ["Use Shift-Enter for multiline code."] = "Usa <Shift-Enter> para código multilínea.", -- src\editor\shellbox.lua
+  ["Value"] = "Valor", -- src\editor\debugger.lua
+  ["View the output/console window"] = "Ver ventana de salida/consola", -- src\editor\menu_view.lua
+  ["View the project/filetree window"] = "Ver la ventana de proyecto/árbol de archivos", -- src\editor\menu_view.lua
+  ["View the stack window"] = "Ver la ventana de la pila de ejecución", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["View the watch window"] = "Ver la ventana de observación", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["Watch"] = nil, -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Welcome to the interactive Lua interpreter."] = "Bienvenido al intérprete interactico de Lua.", -- src\editor\shellbox.lua
+  ["Wrap ar&ound"] = nil, -- src\editor\findreplace.lua
+  ["You must save the program first."] = "Debes guardar el programa primero", -- src\editor\commands.lua
+  ["Zoom In"] = nil, -- src\editor\menu_view.lua
+  ["Zoom Out"] = nil, -- src\editor\menu_view.lua
+  ["Zoom to 100%"] = nil, -- src\editor\menu_view.lua
+  ["Zoom"] = nil, -- src\editor\menu_view.lua
+  ["on line %d"] = "en la línea %d", -- src\editor\debugger.lua, src\editor\editor.lua, src\editor\commands.lua
+  ["traced %d instruction"] = {"%d instrucción trazada", "%d instrucciones trazadas"}, -- src\editor\debugger.lua
+  ["unknown error"] = nil, -- src\editor\debugger.lua
+}

cfg/i18n/fr.lua

@@ -0,0 +1,287 @@
+return {
+  [0] = function(c) return c == 1 and 1 or 2 end, -- plural
+  ["%d instance"] = {"%d occurrence", "%d occurrences"}, -- src\editor\findreplace.lua
+  ["%s event failed: %s"] = "L'événement %s a échoué : %s", -- src\editor\package.lua
+  ["&About"] = "À &propos", -- src\editor\menu_help.lua
+  ["&Add Watch"] = "&Ajouter une expression", -- src\editor\debugger.lua
+  ["&Break"] = "&Interrompre", -- src\editor\menu_project.lua
+  ["&Close Page"] = "&Fermer la page", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Community"] = "&Communauté", -- src\editor\menu_help.lua
+  ["&Compile"] = "&Compiler", -- src\editor\menu_project.lua
+  ["&Copy"] = "Co&pier", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Default Layout"] = "Affichage par &défaut", -- src\editor\menu_view.lua
+  ["&Delete Watch"] = "&Supprimer une expression", -- src\editor\debugger.lua
+  ["&Delete"] = "&Supprimer", -- src\editor\filetree.lua
+  ["&Documentation"] = "&Documentation", -- src\editor\menu_help.lua
+  ["&Down"] = "Vers le &bas", -- src\editor\findreplace.lua
+  ["&Edit Project Directory"] = "&Modifier le répertoire de projet", -- src\editor\filetree.lua
+  ["&Edit Watch"] = "&Modifier une expression", -- src\editor\debugger.lua
+  ["&Edit"] = "É&dition", -- src\editor\menu_edit.lua
+  ["&File"] = "&Fichier", -- src\editor\menu_file.lua
+  ["&Find All"] = "&Rechercher tout", -- src\editor\findreplace.lua
+  ["&Find Next"] = "&Rechercher", -- src\editor\findreplace.lua
+  ["&Find"] = "&Rechercher", -- src\editor\menu_search.lua
+  ["&Fold/Unfold All"] = "Re&plier/Déplier tout", -- src\editor\menu_edit.lua
+  ["&Frequently Asked Questions"] = "&Questions Fréquemment Posées" , -- src\editor\menu_help.lua
+  ["&Getting Started Guide"] = "&Guide de Prise en Main", -- src\editor\menu_help.lua
+  ["&Go To Line..."] = "&Aller à la ligne...", -- src\editor\menu_search.lua
+  ["&Help"] = "Aid&e", -- src\editor\menu_help.lua
+  ["&New Directory"] = "&Nouveau Répertoire", -- src\editor\filetree.lua
+  ["&New"] = "&Nouveau", -- src\editor\menu_file.lua
+  ["&Open..."] = "&Ouvrir...", -- src\editor\menu_file.lua
+  ["&Output/Console Window"] = "&Sortie/Console", -- src\editor\menu_view.lua
+  ["&Paste"] = "Co&ller", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Project Page"] = "&Site Web de ZeroBrane", -- src\editor\menu_help.lua
+  ["&Project"] = "&Projet", -- src\editor\inspect.lua, src\editor\menu_project.lua
+  ["&Redo"] = "&Rétablir", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Rename"] = "&Renommer", -- src\editor\filetree.lua
+  ["&Replace All"] = "Remplacer &tout", -- src\editor\findreplace.lua
+  ["&Replace"] = "Re&mplacer", -- src\editor\findreplace.lua, src\editor\menu_search.lua
+  ["&Run"] = "&Exécuter", -- src\editor\menu_project.lua
+  ["&Save"] = "&Enregistrer", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Search"] = "&Recherche", -- src\editor\menu_search.lua
+  ["&Sort"] = "&Trier", -- src\editor\menu_edit.lua
+  ["&Stack Window"] = "&Pile d'exécution", -- src\editor\menu_view.lua
+  ["&Start Debugger Server"] = "Lancer le &serveur de débogage", -- src\editor\menu_project.lua
+  ["&Status Bar"] = "&Barre d'état", -- src\editor\menu_view.lua
+  ["&Subdirectories"] = "&Sous-répertoires", -- src\editor\findreplace.lua
+  ["&Tool Bar"] = "&Barre d'outils", -- src\editor\menu_view.lua
+  ["&Tutorials"] = "&Tutoriels", -- src\editor\menu_help.lua
+  ["&Undo"] = "&Annuler", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Up"] = "Vers le &haut", -- src\editor\findreplace.lua
+  ["&View"] = "&Affichage", -- src\editor\menu_view.lua
+  ["&Watch Window"] = "&Expressions espionnes", -- src\editor\menu_view.lua
+  [".&bak on Replace"] = ".&bak avant remplacement", -- src\editor\findreplace.lua
+  ["About %s"] = "À propos de %s", -- src\editor\menu_help.lua
+  ["Add To Scratchpad"] = "Ajouter au brouillon", -- src\editor\editor.lua
+  ["Add Watch Expression"] = "Ajouter une expression", -- src\editor\editor.lua
+  ["All files"] = "Tous les fichiers", -- src\editor\commands.lua
+  ["Allow external process to start debugging"] = "Autoriser les processus externes à lancer le débogage", -- src\editor\menu_project.lua
+  ["Analyze the source code"] = "Analyser le code source", -- src\editor\inspect.lua
+  ["Analyze"] = "Analyser", -- src\editor\inspect.lua
+  ["Auto Complete Identifiers"] = "Auto-compléter les identifiants", -- src\editor\menu_edit.lua
+  ["Auto complete while typing"] = "Auto-compléter lors de la saisie", -- src\editor\menu_edit.lua
+  ["Bookmark"] = "&Marque-pages", -- src\editor\menu_edit.lua
+  ["Break execution at the next executed line of code"] = "Interrompre l'exécution à la ligne suivante", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["C&lear Output Window"] = "E&ffacer la fenêtre de sortie", -- src\editor\menu_project.lua
+  ["C&omment/Uncomment"] = "Co&mmenter/Décommenter", -- src\editor\menu_edit.lua
+  ["Can't debug the script in the active editor window."] = "Impossible de déboguer le script dans la fenêtre d'édition active.", -- src\editor\debugger.lua
+  ["Can't find file '%s' in the current project to activate for debugging. Update the project or open the file in the editor before debugging."] = "Impossible de trouver le fichier '%s' dans le projet courant pour permettre le débogage. Mettez le projet à jour ou ouvrez le fichier dans l'éditeur avant débogage.", -- src\editor\debugger.lua
+  ["Can't process auto-recovery record; invalid format: %s."] = "Impossible de lire la récupération automatique ; format invalide : %s.", -- src\editor\commands.lua
+  ["Can't run the entry point script ('%s')."] = "Impossible d'exécuter le point d'entrée du script ('%s').", -- src\editor\debugger.lua
+  ["Can't start debugger server at %s:%d: %s."] = "Impossible de lancer le serveur de débogage à %s:%d: %s." , -- src\editor\debugger.lua
+  ["Can't start debugging session due to internal error '%s'."] = "Impossible de lancer la session de débogage : erreur interne '%s'.", -- src\editor\debugger.lua
+  ["Can't start debugging without an opened file or with the current file not being saved ('%s')."] = "Impossible de lancer le débogage si aucun fichier n'est ouvert ou si le fichier courant n'a pas été enregistré ('%s').", -- src\editor\debugger.lua
+  ["Can't stop debugger server as it is not started."] = "Impossible d'arrêter le serveur de débogage car il n'a pas été démarré", -- src\editor\debugger.lua
+  ["Cancel"] = "Annuler", -- src\editor\findreplace.lua
+  ["Cancelled by the user."] = "Annulé par l'utilisateur.", -- src\editor\findreplace.lua
+  ["Choose a project directory"] = "Choisissez un répertoire de projet", -- src\editor\findreplace.lua, src\editor\menu_project.lua, src\editor\gui.lua, src\editor\filetree.lua
+  ["Choose..."] = "Choisir...", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Clear Items"] = "Effacer les éléments", -- src\editor\menu_file.lua
+  ["Clear items from this list"] = "Effacer les éléments de cette liste", -- src\editor\menu_file.lua
+  ["Clear the output window before compiling or debugging"] = "Effacer la fenêtre de sortie avant compilation ou débogage", -- src\editor\menu_project.lua
+  ["Close &Other Pages"] = "Fermer les &autres pages", -- src\editor\gui.lua
+  ["Close A&ll Pages"] = "Fermer &toutes les pages", -- src\editor\gui.lua
+  ["Close the current editor window"] = "Fermer la fenêtre d'édition active", -- src\editor\menu_file.lua
+  ["Co&ntinue"] = "Co&ntinuer", -- src\editor\menu_project.lua
+  ["Col: %d"] = "Col : %d", -- src\editor\editor.lua
+  ["Command Line Parameters..."] = "Paramètres de Ligne de Commande...", -- src\editor\menu_project.lua
+  ["Command line parameters"] = "Paramètres de ligne de commande", -- src\editor\menu_project.lua
+  ["Comment or uncomment current or selected lines"] = "Commenter ou décommenter les lignes courantes ou sélectionnées", -- src\editor\menu_edit.lua
+  ["Compilation error"] = "Erreur de compilation", -- src\editor\commands.lua, src\editor\debugger.lua
+  ["Compilation successful; %.0f%% success rate (%d/%d)."] = "Compilation réussie ; taux de succès : %.0f%% (%d/%d).", -- src\editor\commands.lua
+  ["Compile the current file"] = "Сompiler le fichier courant", -- src\editor\menu_project.lua
+  ["Complete &Identifier"] = "Compléter l'&identifiant", -- src\editor\menu_edit.lua
+  ["Complete the current identifier"] = "Compléter l'identifiant courant", -- src\editor\menu_edit.lua
+  ["Consider removing backslash from escape sequence '%s'."] = "Essayez de supprimer les antislashs dans '%s'.", -- src\editor\commands.lua
+  ["Copy Full Path"] = "Copier le chemin absolu", -- src\editor\filetree.lua
+  ["Copy selected text to clipboard"] = "Copier le texte sélectionné dans le presse-papiers", -- src\editor\menu_edit.lua
+  ["Couldn't activate file '%s' for debugging; continuing without it."] = "Impossible d'activer le fichier '%s' pour débogage ; poursuite du processus en ignorant le fichier.", -- src\editor\debugger.lua
+  ["Create an empty document"] = "Créer un document vierge", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Cu&t"] = "&Couper", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Cut selected text to clipboard"] = "Couper le texte sélectionné et copier dans le presse-papiers", -- src\editor\menu_edit.lua
+  ["Debugger server started at %s:%d."] = "Serveur de débogage démarré à %s:%d.", -- src\editor\debugger.lua
+  ["Debugger server stopped at %s:%d."] = "Serveur de débogage stoppé à %s:%d.", -- src\editor\debugger.lua
+  ["Debugging session completed (%s)."] = "Session de débogage terminée (%s).", -- src\editor\debugger.lua
+  ["Debugging session started in '%s'."] = "Session de débogage démarrée dans '%s'.", -- src\editor\debugger.lua
+  ["Debugging suspended at %s:%s (couldn't activate the file)."] = "Débogage interrompu à %s:%s (impossible d'activer le fichier).", -- src\editor\debugger.lua
+  ["Detach &Process"] = "Détacher le &processus", -- src\editor\menu_project.lua
+  ["Directory"] = "Répertoire ", -- src\editor\findreplace.lua
+  ["Do you want to delete '%s'?"] = "Voulez-vous effacer '%s'?", -- src\editor\filetree.lua
+  ["Do you want to overwrite it?"] = "Voulez-vous l'écraser?", -- src\editor\commands.lua
+  ["Do you want to reload it?"] = "Voulez-vous le recharger ?", -- src\editor\editor.lua
+  ["Do you want to save the changes to '%s'?"] = "Voulez-vous enregistrer les modifications dans '%s' ?", -- src\editor\commands.lua
+  ["E&xit"] = "&Quitter", -- src\editor\menu_file.lua
+  ["Enter Lua code and press Enter to run it."] = "Saisissez du code Lua et appuyez sur <Entrée> pour l´exécuter.", -- src\editor\shellbox.lua
+  ["Enter command line parameters (use Cancel to clear)"] = "Entrez des paramètres de ligne de commande (pressez Annuler pour effacer)", -- src\editor\menu_project.lua
+  ["Enter line number"] = "Entrez le numéro de ligne", -- src\editor\menu_search.lua
+  ["Error while loading API file: %s"] = "Erreur lors du chargement du fichier d'API : %s", -- src\editor\autocomplete.lua
+  ["Error while loading configuration file: %s"] = "Erreur lors du chargement du fichier de configuration : %s", -- src\editor\style.lua
+  ["Error while processing API file: %s"] = "Erreur lors de la lecture du fichier d'API : %s", -- src\editor\autocomplete.lua
+  ["Error while processing configuration file: %s"] = "Erreur lors de la lecture du fichier de configuration : %s", -- src\editor\style.lua
+  ["Error"] = "Erreur", -- src\editor\commands.lua
+  ["Evaluate In Console"] = "Évaluer dans la console", -- src\editor\editor.lua
+  ["Execute the current project/file and keep updating the code to see immediate results"] = "Exécuter le projet/fichier courant en mettant le code à jour afin de voir les résultats en temps réel", -- src\editor\menu_project.lua
+  ["Execute the current project/file"] = "Exécuter le projet/fichier courant", -- src\editor\menu_project.lua
+  ["Execution error"] = "Erreur d'exécution", -- src\editor\debugger.lua
+  ["Exit program"] = "Quitter le programme", -- src\editor\menu_file.lua
+  ["Expr"] = "Expr.", -- src\editor\debugger.lua
+  ["Expression"] = "Expression", -- src\editor\debugger.lua
+  ["File '%s' has been modified on disk."] = "Le fichier '%s' a été modifié sur le disque.", -- src\editor\editor.lua
+  ["File '%s' has more recent timestamp than restored '%s'; please review before saving."] = "Le fichier '%s' a un horodatage plus récent que celui restauré '%s' ; veuillez vérifier avant d'enregistrer.", -- src\editor\commands.lua
+  ["File '%s' no longer exists."] = "Le fichier '%s' n'existe plus.", -- src\editor\menu_file.lua, src\editor\editor.lua
+  ["File Type"] = "Type de fichier ", -- src\editor\findreplace.lua
+  ["File already exists."] = "Le fichier existe déjà.", -- src\editor\commands.lua
+  ["File history"] = "Historique de fichier", -- src\editor\menu_file.lua
+  ["Find &In Files"] = "Rec&hercher dans les fichiers", -- src\editor\menu_search.lua
+  ["Find &Next"] = "Rechercher l'occurrence &suivante", -- src\editor\menu_search.lua
+  ["Find &Previous"] = "Rechercher l'occurrence &précédente", -- src\editor\menu_search.lua
+  ["Find In Files"] = "Rechercher dans les fichiers", -- src\editor\findreplace.lua
+  ["Find and replace text in files"] = "Rechercher et remplacer le texte dans les fichiers", -- src\editor\menu_search.lua
+  ["Find and replace text"] = "Rechercher et remplacer le texte", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find text in files"] = "Rechercher le texte dans les fichiers", -- src\editor\menu_search.lua
+  ["Find text"] = "Rechercher le texte", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find the earlier text occurence"] = "Recherche l'occurrence précédente du texte", -- src\editor\menu_search.lua
+  ["Find the next text occurrence"] = "Recherche l'occurrence suivante du texte", -- src\editor\menu_search.lua
+  ["Find"] = "Rechercher ", -- src\editor\findreplace.lua
+  ["Fold or unfold all code folds"] = "Replier ou déplier tous les blocs de code", -- src\editor\menu_edit.lua
+  ["Found auto-recovery record and restored saved session."] = "Une récupération automatique a été trouvé et la session a été restaurée.", -- src\editor\commands.lua
+  ["Found"] = "Occurrences trouvées :", -- src\editor\findreplace.lua
+  ["Full &Screen"] = "&Plein écran", -- src\editor\menu_view.lua
+  ["Go To Definition"] = "Aller à la définition", -- src\editor\editor.lua
+  ["Go To Line"] = "Aller à la ligne", -- src\editor\menu_search.lua
+  ["Go To Next Bookmark"] = "Aller au marque-page suivant", -- src\editor\menu_edit.lua
+  ["Go To Previous Bookmark"] = "Aller au marque-page précédent", -- src\editor\menu_edit.lua
+  ["Go to a selected line"] = "Aller à la ligne sélectionnée", -- src\editor\menu_search.lua
+  ["INS"] = "INS", -- src\editor\editor.lua
+  ["In Files"] = "Dans les fichiers", -- src\editor\findreplace.lua
+  ["Jump to a function definition..."] = "Aller à la définition de fonction...", -- src\editor\editor.lua
+  ["Known Files"] = "Fichiers connus", -- src\editor\commands.lua
+  ["Ln: %d"] = "Lig : %d", -- src\editor\editor.lua
+  ["Local console"] = "Console locale", -- src\editor\gui.lua, src\editor\shellbox.lua
+  ["Lua &Interpreter"] = "Interpréteur L&ua", -- src\editor\menu_project.lua
+  ["Mapped remote request for '%s' to '%s'."] = "La requête distante pour '%s' a été associée à '%s'.", -- src\editor\debugger.lua
+  ["Match &case"] = "Respecter la &casse", -- src\editor\findreplace.lua
+  ["Match &whole word"] = "&Mot entier uniquement", -- src\editor\findreplace.lua
+  ["Mixed end-of-line encodings detected."] = "Plusieurs codages de fin de ligne détectés.", -- src\editor\commands.lua
+  ["New &File"] = "Nouveau &Fichier", -- src\editor\filetree.lua
+  ["OVR"] = "OVR", -- src\editor\editor.lua
+  ["Open With Default Program"] = "Ouvrir avec le programme par défaut", -- src\editor\filetree.lua
+  ["Open an existing document"] = "Ouvrir un document existant", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Open file"] = "Ouvrir un fichier", -- src\editor\commands.lua
+  ["Options"] = "Options", -- src\editor\findreplace.lua
+  ["Output (running)"] = "Sortie (en cours d'exécution)", -- src\editor\output.lua
+  ["Output"] = "Sortie", -- src\editor\gui.lua, src\editor\output.lua, src\editor\settings.lua
+  ["Paste text from the clipboard"] = "Coller le texte depuis le presse-papiers", -- src\editor\menu_edit.lua
+  ["Preferences"] = "Préférences", -- src\editor\menu_edit.lua
+  ["Prepend '=' to show complex values on multiple lines."] = "Préfixez par '=' pour afficher les valeurs complexes sur plusieurs lignes.", -- src\editor\shellbox.lua
+  ["Press cancel to abort."] = "Cliquez sur Annuler pour annuler.", -- src\editor\commands.lua
+  ["Program '%s' started in '%s' (pid: %d)."] = "Programme '%s' démarré dans '%s' (pid : %d).", -- src\editor\output.lua
+  ["Program can't start because conflicting process is running as '%s'."] = "Le programme ne peut démarrer à cause d'un conflit de processus avec '%s' (en cours d'exécution).", -- src\editor\output.lua
+  ["Program completed in %.2f seconds (pid: %d)."] = "Programme terminé en %.2f secondes (pid : %d).", -- src\editor\output.lua
+  ["Program starting as '%s'."] = "Programme démarré en tant que '%s'.", -- src\editor\output.lua
+  ["Program stopped (pid: %d)."] = "Programme stoppé (pid : %d).", -- src\editor\debugger.lua
+  ["Program unable to run as '%s'."] = "Impossible d'exécuter le programme en tant que '%s'.", -- src\editor\output.lua
+  ["Project Directory"] = "Répertoire de projet", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Project history"] = "Historique de projet", -- src\editor\menu_file.lua
+  ["Project"] = "Projet", -- src\editor\gui.lua
+  ["Project/&FileTree Window"] = "&Explorateur de projet", -- src\editor\menu_view.lua
+  ["Provide command line parameters"] = "Renseignez les paramètres de ligne de commande", -- src\editor\menu_project.lua
+  ["R/O"] = "R/O", -- src\editor\editor.lua
+  ["R/W"] = "R/W", -- src\editor\editor.lua
+  ["Re&place In Files"] = "Remp&lacer dans les fichiers", -- src\editor\menu_search.lua
+  ["Recent &Projects"] = "&Projets récents", -- src\editor\menu_file.lua
+  ["Recent Files"] = "Fichiers récents", -- src\editor\menu_file.lua
+  ["Redo last edit undone"] = "Rétablir la dernière modification", -- src\editor\menu_edit.lua
+  ["Refused a request to start a new debugging session as there is one in progress already."] = "Une requête de lancement de débogage a été refusée car une session de débogage est déjà en cours.", -- src\editor\debugger.lua
+  ["Regular &expression"] = "&Expression régulière", -- src\editor\findreplace.lua
+  ["Remote console"] = "Console à distance", -- src\editor\shellbox.lua
+  ["Rename All Instances"] = "Renommer toutes les occurrences", -- src\editor\editor.lua
+  ["Replace A&ll"] = "Remplacer &tout", -- src\editor\findreplace.lua
+  ["Replace"] = "Remplacer par ", -- src\editor\findreplace.lua
+  ["Replaced an invalid UTF8 character with %s."] = "Un caractère UTF8 invalide a été remplacé par %s.", -- src\editor\commands.lua
+  ["Replaced"] = "Occurrences remplacées :", -- src\editor\findreplace.lua
+  ["Replacing"] = "Remplacement de", -- src\editor\findreplace.lua
+  ["Reset to default layout"] = "Restaurer l'affichage par défaut", -- src\editor\menu_view.lua
+  ["Run as Scratchpad"] = "Exécuter comme brouillon", -- src\editor\menu_project.lua
+  ["S&top Debugging"] = "&Arrêter le débogage", -- src\editor\menu_project.lua
+  ["S&top Process"] = "&Arrêter le processus", -- src\editor\menu_project.lua
+  ["Save &As..."] = "Enregistrer &sous...", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save A&ll"] = "Enregistrer &tout", -- src\editor\menu_file.lua
+  ["Save Changes?"] = "Enregistrer les modifications ?", -- src\editor\commands.lua
+  ["Save all open documents"] = "Enregistrer tous les documents ouverts", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save file as"] = "Enregistrer le fichier sous", -- src\editor\commands.lua
+  ["Save file?"] = "Enregistrer le fichier ?", -- src\editor\commands.lua
+  ["Save the current document to a file with a new name"] = "Enregistrer le document courant sous un nouveau nom", -- src\editor\menu_file.lua
+  ["Save the current document"] = "Enregistrer le document courant", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Saved auto-recover at %s."] = "Récup. auto enregistrée à %s.", -- src\editor\commands.lua
+  ["Scope"] = "Direction", -- src\editor\findreplace.lua
+  ["Scratchpad error"] = "Erreur dans le brouillon", -- src\editor\debugger.lua
+  ["Searching for"] = "Recherche de", -- src\editor\findreplace.lua
+  ["Sel: %d/%d"] = "Sel: %d/%d", -- src\editor\editor.lua
+  ["Select &All"] = "Sélectionner &tout", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Select all text in the editor"] = "Sélectionner tout le texte dans l'éditeur", -- src\editor\menu_edit.lua
+  ["Select and Find Next"] = "Sélectionner et chercher le suivant", -- src\editor\menu_search.lua
+  ["Select and Find Previous"] = "Sélectionner et chercher le précédent", -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its next occurrence"] = "Sélectionner le mot sous le curseur et chercher son occurence suivante", -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its previous occurrence"] = "Sélectionner le mot sous le curseur et chercher son occurence précédente", -- src\editor\menu_search.lua
+  ["Set From Current File"] = "Définir depuis le fichier courant", -- src\editor\menu_project.lua
+  ["Set project directory from current file"] = "Définir le répertoire de projet depuis le fichier courant", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Set the interpreter to be used"] = "Définir l'interpréteur à utiliser", -- src\editor\menu_project.lua
+  ["Set the project directory to be used"] = "Définir le répertoire de projet à utiliser", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Settings: System"] = "Paramètres : Système", -- src\editor\menu_edit.lua
+  ["Settings: User"] = "Paramètres : Utilisateur", -- src\editor\menu_edit.lua
+  ["Show &Tooltip"] = "Afficher l'info-&bulle", -- src\editor\menu_edit.lua
+  ["Show Location"] = "Afficher l'emplacement", -- src\editor\gui.lua, src\editor\filetree.lua
+  ["Show tooltip for current position; place cursor after opening bracket of function"] = "Afficher l'info-bulle pour la position actuelle ; placez le curseur après la parenthèse ouvrante de la fonction", -- src\editor\menu_edit.lua
+  ["Show/Hide the status bar"] = "Afficher/Masquer la barre de statut", -- src\editor\menu_view.lua
+  ["Show/Hide the toolbar"] = "Afficher/Masquer la barre d'outils", -- src\editor\menu_view.lua
+  ["Sort selected lines"] = "Trier les lignes sélectionnées", -- src\editor\menu_edit.lua
+  ["Stack"] = "Pile d'exécution", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Start &Debugging"] = "Lancer le &débogage", -- src\editor\menu_project.lua
+  ["Start or Continue debugging"] = "Démarrer ou Continuer le debogage", -- src\editor\gui.lua
+  ["Start or continue debugging"] = "Démarrer ou continuer le debogage", -- src\editor\menu_project.lua
+  ["Step &Into"] = "Pas à pas détai&llé", -- src\editor\menu_project.lua
+  ["Step &Over"] = "Pas à pas so&mmaire", -- src\editor\menu_project.lua
+  ["Step O&ut"] = "Pas à pas so&rtant", -- src\editor\menu_project.lua
+  ["Step into"] = "Rentrer dans l'instruction suivante", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step out of the current function"] = "Sortir de la fonction courante", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step over"] = "Enjamber l'instruction suivante", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop debugging and continue running the process"] = "Arrêter le débogage et continuer l'exécution du processus", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop the currently running process"] = "Arrêter le processus en cours d'exécution", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Switch to or from full screen mode"] = "Activer ou désactiver le mode plein écran", -- src\editor\menu_view.lua
+  ["Text not found."] = "Texte non trouvé.", -- src\editor\findreplace.lua
+  ["The API file must be located in a subdirectory of the API directory."] = "Le fichier d'API doit être placé dans un sous-répertoire du répertoire d'API.", -- src\editor\autocomplete.lua
+  ["Toggle Bookmark"] = "Créer/Supprimer un marque-page", -- src\editor\menu_edit.lua
+  ["Toggle Break&point"] = "Créer/Supprimer un &point d'arrêt", -- src\editor\menu_project.lua
+  ["Toggle breakpoint"] = "Créer ou supprimer un point d'arrêt", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Tr&ace"] = "&Tracer", -- src\editor\menu_project.lua
+  ["Trace execution showing each executed line"] = "Tracer l'exécution en montrant chaque ligne de code exécutée", -- src\editor\menu_project.lua
+  ["Unable to create directory '%s'."] = "Impossible de créer le répertoire '%s'.", -- src\editor\filetree.lua
+  ["Unable to create file '%s'."] = "Impossible de créer le fichier '%s'.", -- src\editor\filetree.lua
+  ["Unable to load file '%s'."] = "Impossible de charger le le fichier '%s'.", -- src\editor\commands.lua
+  ["Unable to rename file '%s'."] = "Impossible de renommer le fichier '%s'.", -- src\editor\filetree.lua
+  ["Unable to save file '%s': %s"] = "Impossible d'enregistrer le fichier '%s' : %s", -- src\editor\commands.lua
+  ["Unable to stop program (pid: %d), code %d."] = "Impossible d'arrêter le programme (pid : %d), code %d.", -- src\editor\debugger.lua
+  ["Undo last edit"] = "Annuler la dernière modification", -- src\editor\menu_edit.lua
+  ["Use '%s' to see full description."] = "Utilisez '%s' pour voir la description complète.", -- src\editor\editor.lua
+  ["Use '%s' to show line endings and '%s' to convert them."] = "Utilisez '%s' pour afficher les fins de ligne et '%s' pour les convertir.", -- src\editor\commands.lua
+  ["Use 'clear' to clear the shell output and the history."] = "Utilisez 'clear' pour effacer la sortie console et l´historique.", -- src\editor\shellbox.lua
+  ["Use Shift-Enter for multiline code."] = "Appuyez sur <Shift-Entrée> pour du code multiligne.", -- src\editor\shellbox.lua
+  ["Value"] = "Valeur", -- src\editor\debugger.lua
+  ["View the output/console window"] = "Afficher la fenêtre de sortie/console", -- src\editor\menu_view.lua
+  ["View the project/filetree window"] = "Afficher la fenêtre d'explorateur de projet", -- src\editor\menu_view.lua
+  ["View the stack window"] = "Afficher la fenêtre de pile d'exécution", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["View the watch window"] = "Afficher la fenêtre d'expressions espionnes", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["Watch"] = "Expressions espionnes", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Welcome to the interactive Lua interpreter."] = "Bienvenue dans l´interpréteur interactif Lua.", -- src\editor\shellbox.lua
+  ["Wrap ar&ound"] = "B&oucler", -- src\editor\findreplace.lua
+  ["You must save the program first."] = "Vous devez d'abord enregistrer le programme.", -- src\editor\commands.lua
+  ["Zoom In"] = "Zoomer", -- src\editor\menu_view.lua
+  ["Zoom Out"] = "Dézoomer", -- src\editor\menu_view.lua
+  ["Zoom to 100%"] = "Zoomer à 100%", -- src\editor\menu_view.lua
+  ["Zoom"] = "Zoom", -- src\editor\menu_view.lua
+  ["on line %d"] = "à la ligne %d", -- src\editor\debugger.lua, src\editor\editor.lua, src\editor\commands.lua
+  ["traced %d instruction"] = {"%d instruction tracée", "%d instructions tracées"}, -- src\editor\debugger.lua
+  ["unknown error"] = "erreur inconnue", -- src\editor\debugger.lua
+}

cfg/i18n/it.lua

@@ -0,0 +1,287 @@
+return {
+  [0] = function(c) return c == 1 and 1 or 2 end, -- plural
+  ["%d instance"] = {"%d occorrenza", "%d occorrenze"}, -- src\editor\findreplace.lua
+  ["%s event failed: %s"] = "L'evento %s è fallito : %s", -- src\editor\package.lua
+  ["&About"] = "Informazioni", -- src\editor\menu_help.lua
+  ["&Add Watch"] = "&Aggiungi Espressione di Controllo", -- src\editor\debugger.lua
+  ["&Break"] = "Interrompi", -- src\editor\menu_project.lua
+  ["&Close Page"] = "&Chiudi pagina", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Community"] = "&Comunità", -- src\editor\menu_help.lua
+  ["&Compile"] = "&Compila", -- src\editor\menu_project.lua
+  ["&Copy"] = "&Copia", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Default Layout"] = "Visualizzazione di &Default", -- src\editor\menu_view.lua
+  ["&Delete Watch"] = "Elimina Espressione di Controllo", -- src\editor\debugger.lua
+  ["&Delete"] = "Elimina", -- src\editor\filetree.lua
+  ["&Documentation"] = "Documentazione", -- src\editor\menu_help.lua
+  ["&Down"] = "Verso il basso", -- src\editor\findreplace.lua
+  ["&Edit Project Directory"] = "Modifica directory di progetto", -- src\editor\filetree.lua
+  ["&Edit Watch"] = "Modifica Espressione di Controllo", -- src\editor\debugger.lua
+  ["&Edit"] = "Modifica", -- src\editor\menu_edit.lua
+  ["&File"] = "File", -- src\editor\menu_file.lua
+  ["&Find All"] = "Trova Tutti", -- src\editor\findreplace.lua
+  ["&Find Next"] = "Trova Successivo", -- src\editor\findreplace.lua
+  ["&Find"] = "Ricerca", -- src\editor\menu_search.lua
+  ["&Fold/Unfold All"] = "Apri/Chiudi tutto", -- src\editor\menu_edit.lua
+  ["&Frequently Asked Questions"] = "Domande &Frequenti", -- src\editor\menu_help.lua
+  ["&Getting Started Guide"] = "&Guida Introduttiva", -- src\editor\menu_help.lua
+  ["&Go To Line..."] = "Vai a riga...", -- src\editor\menu_search.lua
+  ["&Help"] = "Aiuto", -- src\editor\menu_help.lua
+  ["&New Directory"] = "&Nuova Directory", -- src\editor\filetree.lua
+  ["&New"] = "&Nuovo", -- src\editor\menu_file.lua
+  ["&Open..."] = "&Apri...", -- src\editor\menu_file.lua
+  ["&Output/Console Window"] = "Finestra di Output/Console", -- src\editor\menu_view.lua
+  ["&Paste"] = "Incolla", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Project Page"] = "&Pagina di Progetto", -- src\editor\menu_help.lua
+  ["&Project"] = "&Progetto", -- src\editor\inspect.lua, src\editor\menu_project.lua
+  ["&Redo"] = "&Ripeti", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Rename"] = "&Rinomina", -- src\editor\filetree.lua
+  ["&Replace All"] = "Sostituisci Tutti", -- src\editor\findreplace.lua
+  ["&Replace"] = "Sostituisci", -- src\editor\findreplace.lua, src\editor\menu_search.lua
+  ["&Run"] = "Lancia", -- src\editor\menu_project.lua
+  ["&Save"] = "&Salva", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["&Search"] = "Ricerca", -- src\editor\menu_search.lua
+  ["&Sort"] = "Ordina", -- src\editor\menu_edit.lua
+  ["&Stack Window"] = "Stack di chiamate", -- src\editor\menu_view.lua
+  ["&Start Debugger Server"] = "Avvia Debugger Server", -- src\editor\menu_project.lua
+  ["&Status Bar"] = "Barra di stato", -- src\editor\menu_view.lua
+  ["&Subdirectories"] = "Sotto Directory", -- src\editor\findreplace.lua
+  ["&Tool Bar"] = "Barra degli strumenti", -- src\editor\menu_view.lua
+  ["&Tutorials"] = "Guide", -- src\editor\menu_help.lua
+  ["&Undo"] = "Annulla", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["&Up"] = "Verso l'alto", -- src\editor\findreplace.lua
+  ["&View"] = "Visualizza", -- src\editor\menu_view.lua
+  ["&Watch Window"] = "Finestra Espressioni di Controllo", -- src\editor\menu_view.lua
+  [".&bak on Replace"] = ".bak su Sostituisci", -- src\editor\findreplace.lua
+  ["About %s"] = "Informazioni su %s", -- src\editor\menu_help.lua
+  ["Add To Scratchpad"] = "Aggiungi a Scratchpad ", -- src\editor\editor.lua
+  ["Add Watch Expression"] = "Aggiungi Espressione di Controllo", -- src\editor\editor.lua
+  ["All files"] = "Tutti i files", -- src\editor\commands.lua
+  ["Allow external process to start debugging"] = "Permetti a processi esterni di avviare il debug", -- src\editor\menu_project.lua
+  ["Analyze the source code"] = "Analizza il codice", -- src\editor\inspect.lua
+  ["Analyze"] = "Analizza", -- src\editor\inspect.lua
+  ["Auto Complete Identifiers"] = "Autocompletamento identificatori", -- src\editor\menu_edit.lua
+  ["Auto complete while typing"] = "Autocompletamento in linea", -- src\editor\menu_edit.lua
+  ["Bookmark"] = "Segnalibro", -- src\editor\menu_edit.lua
+  ["Break execution at the next executed line of code"] = "Interrompi l'esecuzione alla successiva riga di codice ", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["C&lear Output Window"] = "Pulisci finestra di output", -- src\editor\menu_project.lua
+  ["C&omment/Uncomment"] = "Commenta/Scommenta", -- src\editor\menu_edit.lua
+  ["Can't debug the script in the active editor window."] = "Impossibile farte debug dello script nella finestra attiva", -- src\editor\debugger.lua
+  ["Can't find file '%s' in the current project to activate for debugging. Update the project or open the file in the editor before debugging."] = "File '%s' non trovato nel progetto per attivare il debug. Modificare il progetto o apire il file prima di lanciare il debug.", -- src\editor\debugger.lua
+  ["Can't process auto-recovery record; invalid format: %s."] = "Impossibile procedere all'auto-recovery; Formato non valido: %s.", -- src\editor\commands.lua
+  ["Can't run the entry point script ('%s')."] = "Impossibile eseguire il punto di ingresos dello script (%s).", -- src\editor\debugger.lua
+  ["Can't start debugger server at %s:%d: %s."] = "Impossibile lanciare il server debugger a %s:%d: %s.", -- src\editor\debugger.lua
+  ["Can't start debugging session due to internal error '%s'."] = "Impossibile lanciare la sessione di debug: errore interno '%s'.'", -- src\editor\debugger.lua
+  ["Can't start debugging without an opened file or with the current file not being saved ('%s')."] = "Impossibile lanciare il debug senza aver aperto un file o se il file corrente non è stato salvato ('%s').", -- src\editor\debugger.lua
+  ["Can't stop debugger server as it is not started."] = "Impossibile fermare il server debugger perchè non è stato avviato", -- src\editor\debugger.lua
+  ["Cancel"] = "Annulla", -- src\editor\findreplace.lua
+  ["Cancelled by the user."] = "Annullato dall'utente", -- src\editor\findreplace.lua
+  ["Choose a project directory"] = "Scegli la directory di un progetto", -- src\editor\findreplace.lua, src\editor\menu_project.lua, src\editor\gui.lua, src\editor\filetree.lua
+  ["Choose..."] = "Scegli...", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Clear Items"] = "Pulisci elementi", -- src\editor\menu_file.lua
+  ["Clear items from this list"] = "Pulisci elementi della lista", -- src\editor\menu_file.lua
+  ["Clear the output window before compiling or debugging"] = "Pulisci la finestra di output prima di compilare o lanciare debug", -- src\editor\menu_project.lua
+  ["Close &Other Pages"] = "Chidi le Altre Pagine", -- src\editor\gui.lua
+  ["Close A&ll Pages"] = "Chiudi Tutte le Pagine", -- src\editor\gui.lua
+  ["Close the current editor window"] = "Chiude la finestra dell'edit corrente", -- src\editor\menu_file.lua
+  ["Co&ntinue"] = "Co&ntinua", -- src\editor\menu_project.lua
+  ["Col: %d"] = "Col: %d", -- src\editor\editor.lua
+  ["Command Line Parameters..."] = "Parametri Riga di Comando...", -- src\editor\menu_project.lua
+  ["Command line parameters"] = "Parametri Riga di Comando", -- src\editor\menu_project.lua
+  ["Comment or uncomment current or selected lines"] = "Commenta o scommenta la linea corrente o selezionat", -- src\editor\menu_edit.lua
+  ["Compilation error"] = "Errore di compilazione", -- src\editor\commands.lua, src\editor\debugger.lua
+  ["Compilation successful; %.0f%% success rate (%d/%d)."] = "Compilazione riuscita; tasso di successo : %.0f%% (%d/%d).", -- src\editor\commands.lua
+  ["Compile the current file"] = "Compila il file corrente", -- src\editor\menu_project.lua
+  ["Complete &Identifier"] = "Completa l'&Identificatore", -- src\editor\menu_edit.lua
+  ["Complete the current identifier"] = "Completa l'identificatore corrente", -- src\editor\menu_edit.lua
+  ["Consider removing backslash from escape sequence '%s'."] = "Prova a rimuovere i backslash dalla sequenza di escape '%s'.", -- src\editor\commands.lua
+  ["Copy Full Path"] = "Copia Path Completo", -- src\editor\filetree.lua
+  ["Copy selected text to clipboard"] = "Copia il testo selezionato negli appunti", -- src\editor\menu_edit.lua
+  ["Couldn't activate file '%s' for debugging; continuing without it."] = "Impossibile attivare il file '%s' per debug; si prosegue senza.", -- src\editor\debugger.lua
+  ["Create an empty document"] = "Crea un documento vuoto", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Cu&t"] = "&Taglia", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Cut selected text to clipboard"] = "Taglia il testo selezionato e mette negli appunti", -- src\editor\menu_edit.lua
+  ["Debugger server started at %s:%d."] = "Server Debugger iniziato %s:%d.", -- src\editor\debugger.lua
+  ["Debugger server stopped at %s:%d."] = "Server Debugger fermato %s:%d.", -- src\editor\debugger.lua
+  ["Debugging session completed (%s)."] = "Sessione di debug completata (%s).", -- src\editor\debugger.lua
+  ["Debugging session started in '%s'."] = "Sessione di debug iniziata da '%s'.", -- src\editor\debugger.lua
+  ["Debugging suspended at %s:%s (couldn't activate the file)."] = "Debug sospeso a %s:%s (impossibile attivare il file).", -- src\editor\debugger.lua
+  ["Detach &Process"] = "Scollega Processo", -- src\editor\menu_project.lua
+  ["Directory"] = "Directory", -- src\editor\findreplace.lua
+  ["Do you want to delete '%s'?"] = "Vuoi eliminare '%s'?", -- src\editor\filetree.lua
+  ["Do you want to overwrite it?"] = "Vuoi sovrascrivere '%s'?", -- src\editor\commands.lua
+  ["Do you want to reload it?"] = "Vuoi ricaricarlo?", -- src\editor\editor.lua
+  ["Do you want to save the changes to '%s'?"] = "Vuoi salvare le modifiche a '%s'?", -- src\editor\commands.lua
+  ["E&xit"] = "Uscita", -- src\editor\menu_file.lua
+  ["Enter Lua code and press Enter to run it."] = "Inserisci codice Lua e premi <Enter> per eseguirlo.", -- src\editor\shellbox.lua
+  ["Enter command line parameters (use Cancel to clear)"] = "Inserisci i parametri riga di comando (Annulla per pulire)", -- src\editor\menu_project.lua
+  ["Enter line number"] = "Inserisci il numero di linea", -- src\editor\menu_search.lua
+  ["Error while loading API file: %s"] = "Errore durante il caricamento del file API: %s", -- src\editor\autocomplete.lua
+  ["Error while loading configuration file: %s"] = "Errore nel caricamento del file di configurazione: %s", -- src\editor\style.lua
+  ["Error while processing API file: %s"] = "Errore durante l'elaborazione del file API: %s", -- src\editor\autocomplete.lua
+  ["Error while processing configuration file: %s"] = "Errore durante l'elaborazione del file di configurazione: %s", -- src\editor\style.lua
+  ["Error"] = "Errore", -- src\editor\commands.lua
+  ["Evaluate In Console"] = "Elabora in console", -- src\editor\editor.lua
+  ["Execute the current project/file and keep updating the code to see immediate results"] = "Esegue il progetto/file corrente e permette di modificare il codice per vedere i risultati in tempo reale", -- src\editor\menu_project.lua
+  ["Execute the current project/file"] = "Esegue il progetto/file corrente", -- src\editor\menu_project.lua
+  ["Execution error"] = "Errore di esecuzione", -- src\editor\debugger.lua
+  ["Exit program"] = "Uscita dal programma", -- src\editor\menu_file.lua
+  ["Expr"] = "Expr.", -- src\editor\debugger.lua
+  ["Expression"] = "Espressione", -- src\editor\debugger.lua
+  ["File '%s' has been modified on disk."] = "Il file '%s' e' stato modificato sul disco.", -- src\editor\editor.lua
+  ["File '%s' has more recent timestamp than restored '%s'; please review before saving."] = "Il file '%s' ha un timestamp più recente di quello ripristinato '%s'; verificare prima di salvare.", -- src\editor\commands.lua
+  ["File '%s' no longer exists."] = "Il file '%s' non esiste piu'.", -- src\editor\menu_file.lua, src\editor\editor.lua
+  ["File Type"] = "File Type", -- src\editor\findreplace.lua
+  ["File already exists."] = "Il file esiste già.", -- src\editor\commands.lua
+  ["File history"] = "Storia del file", -- src\editor\menu_file.lua
+  ["Find &In Files"] = "Ricerca nei files", -- src\editor\menu_search.lua
+  ["Find &Next"] = "Cerca il successivo", -- src\editor\menu_search.lua
+  ["Find &Previous"] = "Cerca il precedente", -- src\editor\menu_search.lua
+  ["Find In Files"] = "Ricerca nei Files", -- src\editor\findreplace.lua
+  ["Find and replace text in files"] = "Cerca e sostituisci testo nei files", -- src\editor\menu_search.lua
+  ["Find and replace text"] = "Cerca e sostituisci testo", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find text in files"] = "Cerca testo nei files", -- src\editor\menu_search.lua
+  ["Find text"] = "Cerca testo", -- src\editor\gui.lua, src\editor\menu_search.lua
+  ["Find the earlier text occurence"] = "Cerca la precedente occorrenza nel testo", -- src\editor\menu_search.lua
+  ["Find the next text occurrence"] = "Cerca la successiva occorrenza nel testo", -- src\editor\menu_search.lua
+  ["Find"] = "Ricerca", -- src\editor\findreplace.lua
+  ["Fold or unfold all code folds"] = "Apri o chiudi tutti i blocchi di codice", -- src\editor\menu_edit.lua
+  ["Found auto-recovery record and restored saved session."] = "Trovato punto di auto-revcovery e ripristinata la sessione salvata", -- src\editor\commands.lua
+  ["Found"] = "Occorrenze trovate:", -- src\editor\findreplace.lua
+  ["Full &Screen"] = "Schermo intero", -- src\editor\menu_view.lua
+  ["Go To Definition"] = "Vai a Definizione", -- src\editor\editor.lua
+  ["Go To Line"] = "Vai alla riga", -- src\editor\menu_search.lua
+  ["Go To Next Bookmark"] = "Vai al Prossimo Segnalibro", -- src\editor\menu_edit.lua
+  ["Go To Previous Bookmark"] = "Vai al Precedente Segnalibro", -- src\editor\menu_edit.lua
+  ["Go to a selected line"] = "Vai alla riga selezionata", -- src\editor\menu_search.lua
+  ["INS"] = "INS", -- src\editor\editor.lua
+  ["In Files"] = "Nei Files", -- src\editor\findreplace.lua
+  ["Jump to a function definition..."] = "Salta alla definizione della funzione...", -- src\editor\editor.lua
+  ["Known Files"] = "Files conosciuti", -- src\editor\commands.lua
+  ["Ln: %d"] = "Ln: %d", -- src\editor\editor.lua
+  ["Local console"] = "Console locale", -- src\editor\gui.lua, src\editor\shellbox.lua
+  ["Lua &Interpreter"] = "&Interprete Lua", -- src\editor\menu_project.lua
+  ["Mapped remote request for '%s' to '%s'."] = "Richiesta remota '%s' mappata su '%s'.", -- src\editor\debugger.lua
+  ["Match &case"] = "Maiuscole/Minuscole", -- src\editor\findreplace.lua
+  ["Match &whole word"] = "Intera parola", -- src\editor\findreplace.lua
+  ["Mixed end-of-line encodings detected."] = "Trovata codifica Fine-Riga mista.", -- src\editor\commands.lua
+  ["New &File"] = "Nuovo &File", -- src\editor\filetree.lua
+  ["OVR"] = "OVR", -- src\editor\editor.lua
+  ["Open With Default Program"] = "Apri con programma predefinito", -- src\editor\filetree.lua
+  ["Open an existing document"] = "Apri un documento esistente", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Open file"] = "Apri un file", -- src\editor\commands.lua
+  ["Options"] = "Opzioni", -- src\editor\findreplace.lua
+  ["Output (running)"] = "Output (in corso d'esecuzione)", -- src\editor\output.lua
+  ["Output"] = "Output", -- src\editor\gui.lua, src\editor\output.lua, src\editor\settings.lua
+  ["Paste text from the clipboard"] = "Incolla testo dagli appunti", -- src\editor\menu_edit.lua
+  ["Preferences"] = "Preferenze", -- src\editor\menu_edit.lua
+  ["Prepend '=' to show complex values on multiple lines."] = "Prefissa '=' per visualizzare valori complessi su piu` righe", -- src\editor\shellbox.lua
+  ["Press cancel to abort."] = "Premi cancel per bloccare.", -- src\editor\commands.lua
+  ["Program '%s' started in '%s' (pid: %d)."] = "Programma '%s' partito da '%s' (pid: %d).", -- src\editor\output.lua
+  ["Program can't start because conflicting process is running as '%s'."] = "Il programma non puo' partire perchè in conflitto con il processo in esecuzione '%s'.", -- src\editor\output.lua
+  ["Program completed in %.2f seconds (pid: %d)."] = "Programma completato in %.2f secondi (pid: %d).", -- src\editor\output.lua
+  ["Program starting as '%s'."] = "Programma partito da '%s'.", -- src\editor\output.lua
+  ["Program stopped (pid: %d)."] = "Programma fermato (pid: %d).", -- src\editor\debugger.lua
+  ["Program unable to run as '%s'."] = "Il programma non puo' partire '%s'.", -- src\editor\output.lua
+  ["Project Directory"] = "Directory del Progetto", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Project history"] = "Storia del Progetto", -- src\editor\menu_file.lua
+  ["Project"] = "Progetto", -- src\editor\gui.lua
+  ["Project/&FileTree Window"] = "Progetto/Explorer", -- src\editor\menu_view.lua
+  ["Provide command line parameters"] = "Fornire parametri riga di comando", -- src\editor\menu_project.lua
+  ["R/O"] = "R/O", -- src\editor\editor.lua
+  ["R/W"] = "R/W", -- src\editor\editor.lua
+  ["Re&place In Files"] = "Sostituisci nei files", -- src\editor\menu_search.lua
+  ["Recent &Projects"] = "Progetti Recenti", -- src\editor\menu_file.lua
+  ["Recent Files"] = "Files recenti", -- src\editor\menu_file.lua
+  ["Redo last edit undone"] = "Ripeti l'ultima azione annullata", -- src\editor\menu_edit.lua
+  ["Refused a request to start a new debugging session as there is one in progress already."] = "Impossibile aprire una nuova sessione di debug in quanto ne esiste una in corso", -- src\editor\debugger.lua
+  ["Regular &expression"] = "Regular &expression", -- src\editor\findreplace.lua
+  ["Remote console"] = "Console remota", -- src\editor\shellbox.lua
+  ["Rename All Instances"] = "Rinomina tutte le occorrenze", -- src\editor\editor.lua
+  ["Replace A&ll"] = "Sostituisci Tutto", -- src\editor\findreplace.lua
+  ["Replace"] = "Sostituisci", -- src\editor\findreplace.lua
+  ["Replaced an invalid UTF8 character with %s."] = "Sostituito un carattere UTF8 invalido con %s.", -- src\editor\commands.lua
+  ["Replaced"] = "Sostituiti :", -- src\editor\findreplace.lua
+  ["Replacing"] = "Sostituzione", -- src\editor\findreplace.lua
+  ["Reset to default layout"] = "Ritorna al default layout", -- src\editor\menu_view.lua
+  ["Run as Scratchpad"] = "Esegui in Scratchpad (Live coding)", -- src\editor\menu_project.lua
+  ["S&top Debugging"] = "Ferma il debugger", -- src\editor\menu_project.lua
+  ["S&top Process"] = "Ferma il processo", -- src\editor\menu_project.lua
+  ["Save &As..."] = "S&alva con nome...", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save A&ll"] = "Sa&lva tutto", -- src\editor\menu_file.lua
+  ["Save Changes?"] = "Vuoi salvare le modifiche?", -- src\editor\commands.lua
+  ["Save all open documents"] = "Salva tutti i documenti aperti", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Save file as"] = "Salva il file con nome", -- src\editor\commands.lua
+  ["Save file?"] = "Vuoi salvare il file?", -- src\editor\commands.lua
+  ["Save the current document to a file with a new name"] = "Salva il documento corrente in un file con un nuovo nome", -- src\editor\menu_file.lua
+  ["Save the current document"] = "Salva il documento corrente", -- src\editor\gui.lua, src\editor\menu_file.lua
+  ["Saved auto-recover at %s."] = "Salvato auto-recover a %s.", -- src\editor\commands.lua
+  ["Scope"] = "Direzione", -- src\editor\findreplace.lua
+  ["Scratchpad error"] = "Errore durente Scratchpad", -- src\editor\debugger.lua
+  ["Searching for"] = "Ricerca di", -- src\editor\findreplace.lua
+  ["Sel: %d/%d"] = "Sel: %d/%d", -- src\editor\editor.lua
+  ["Select &All"] = "Selezion&a Tutto", -- src\editor\menu_edit.lua, src\editor\editor.lua
+  ["Select all text in the editor"] = "Seleziona tutto il testo nell'editor", -- src\editor\menu_edit.lua
+  ["Select and Find Next"] = "Seleziona e trova successivo", -- src\editor\menu_search.lua
+  ["Select and Find Previous"] = "Seleziona e trova precedente", -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its next occurrence"] = "Seleziona la parola e trova successivo", -- src\editor\menu_search.lua
+  ["Select the word under cursor and find its previous occurrence"] = "Seleziona la parola e trova precedente", -- src\editor\menu_search.lua
+  ["Set From Current File"] = "Impostato da file corrente", -- src\editor\menu_project.lua
+  ["Set project directory from current file"] = "Definisci la directory del progeetto dal file corrente", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Set the interpreter to be used"] = "Definisci l'interprete da utilizzare", -- src\editor\menu_project.lua
+  ["Set the project directory to be used"] = "Imposta la directory di progetto da usare", -- src\editor\menu_project.lua, src\editor\filetree.lua
+  ["Settings: System"] = "Impostazioni: Sistema", -- src\editor\menu_edit.lua
+  ["Settings: User"] = "Impostazioni: Utente", -- src\editor\menu_edit.lua
+  ["Show &Tooltip"] = "Mos&tra i consigli", -- src\editor\menu_edit.lua
+  ["Show Location"] = "Mostra posizione", -- src\editor\gui.lua, src\editor\filetree.lua
+  ["Show tooltip for current position; place cursor after opening bracket of function"] = "Mostra i consigli per la posizione corrente; muovi il cursore dopo la parentesi o la funzione", -- src\editor\menu_edit.lua
+  ["Show/Hide the status bar"] = "Mostra/Nascondi la barra di stato", -- src\editor\menu_view.lua
+  ["Show/Hide the toolbar"] = "Mostra/Nascondi la barra degli strumenti", -- src\editor\menu_view.lua
+  ["Sort selected lines"] = "Ordina le righe selezionate", -- src\editor\menu_edit.lua
+  ["Stack"] = "Stack", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Start &Debugging"] = "Inizia il &Debug", -- src\editor\menu_project.lua
+  ["Start or Continue debugging"] = "Inizia o continua il debug", -- src\editor\gui.lua
+  ["Start or continue debugging"] = "Inizia o continua il debug", -- src\editor\menu_project.lua
+  ["Step &Into"] = "Step &Into", -- src\editor\menu_project.lua
+  ["Step &Over"] = "Step &Over", -- src\editor\menu_project.lua
+  ["Step O&ut"] = "Step O&ut", -- src\editor\menu_project.lua
+  ["Step into"] = "Step into", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step out of the current function"] = "Contina fino all'uscita della funzione", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Step over"] = "Continua senza entrare nella funzione", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop debugging and continue running the process"] = "Ferma il debug e continua l'esecuzione del processo", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Stop the currently running process"] = "Ferma il processo in esecuzione", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Switch to or from full screen mode"] = "Passa da tutto schermo a finestra", -- src\editor\menu_view.lua
+  ["Text not found."] = "Testo non trovato.", -- src\editor\findreplace.lua
+  ["The API file must be located in a subdirectory of the API directory."] = "Il file API deve essere presente in una sottodirectory o nella direcotory API.", -- src\editor\autocomplete.lua
+  ["Toggle Bookmark"] = "Attiva/Disattiva Segnalibro", -- src\editor\menu_edit.lua
+  ["Toggle Break&point"] = "Attiva/Disattiva Break&point", -- src\editor\menu_project.lua
+  ["Toggle breakpoint"] = "Attiva/Disattiva Breakpoint", -- src\editor\gui.lua, src\editor\menu_project.lua
+  ["Tr&ace"] = "Tr&ace", -- src\editor\menu_project.lua
+  ["Trace execution showing each executed line"] = "Traccia l'esecuzione mostrando le righe eseguite", -- src\editor\menu_project.lua
+  ["Unable to create directory '%s'."] = "Impossibile creare la directory '%s'.", -- src\editor\filetree.lua
+  ["Unable to create file '%s'."] = "Impossibile creare il file '%s'.", -- src\editor\filetree.lua
+  ["Unable to load file '%s'."] = "Impossibile aprire il file '%s'.", -- src\editor\commands.lua
+  ["Unable to rename file '%s'."] = "Impossibile rinominare il file '%s'.", -- src\editor\filetree.lua
+  ["Unable to save file '%s': %s"] = "Impossibile salvare il file '%s': %s", -- src\editor\commands.lua
+  ["Unable to stop program (pid: %d), code %d."] = "Impossibile fermare il programma (pid: %d), code %d.", -- src\editor\debugger.lua
+  ["Undo last edit"] = "Annulla l'ultima azione di edit", -- src\editor\menu_edit.lua
+  ["Use '%s' to see full description."] = "Utilizza '%s' per vedere la descrizione completa.", -- src\editor\editor.lua
+  ["Use '%s' to show line endings and '%s' to convert them."] = "Utilizza '%s' per vedere la fine della riga e '%s' per convertirli.", -- src\editor\commands.lua
+  ["Use 'clear' to clear the shell output and the history."] = "Utilizza 'clear' per pulire l`output e lo storico.", -- src\editor\shellbox.lua
+  ["Use Shift-Enter for multiline code."] = "Premi <Shift-Invio> per inserire piu` righe di codice.", -- src\editor\shellbox.lua
+  ["Value"] = "Valore", -- src\editor\debugger.lua
+  ["View the output/console window"] = "Mostra la finestra di output/console", -- src\editor\menu_view.lua
+  ["View the project/filetree window"] = "Mostra la finestra di progetto/explorer", -- src\editor\menu_view.lua
+  ["View the stack window"] = "Mostra la finestra dello Stack", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["View the watch window"] = "Mostra la finestra delle Espressioni di Controllo", -- src\editor\gui.lua, src\editor\menu_view.lua
+  ["Watch"] = "Watch", -- src\editor\debugger.lua, src\editor\gui.lua
+  ["Welcome to the interactive Lua interpreter."] = "Benvenuti nell`interprete interattivo Lua.", -- src\editor\shellbox.lua
+  ["Wrap ar&ound"] = "Wrap ar&ound", -- src\editor\findreplace.lua
+  ["You must save the program first."] = "Devi prima salvare il programma", -- src\editor\commands.lua
+  ["Zoom In"] = "Zoom In", -- src\editor\menu_view.lua
+  ["Zoom Out"] = "Zoom Out", -- src\editor\menu_view.lua
+  ["Zoom to 100%"] = "Zoom a 100%", -- src\editor\menu_view.lua
+  ["Zoom"] = "Zoom", -- src\editor\menu_view.lua
+  ["on line %d"] = "alla linea %d", -- src\editor\debugger.lua, src\editor\editor.lua, src\editor\commands.lua
+  ["traced %d instruction"] = {"tracciata %d istruzione", "%d istruzioni tracciate"}, -- src\editor\debugger.lua
+  ["unknown error"] = "errore sconosciuto", -- src\editor\debugger.lua
+}