decorrelate_ls, _rs and _ms are decorrelate[1], [2] and [3] respectively.
The code ended up testing indep ([0]) as twice, ms never, and misnaming
the other two.
Segmented loads are slow, so here we use unit-strided load and narrowing shifts.
c910:
fcmul_add_c: 2179
fcmul_add_rvv_f64: 1652
c908:
fcmul_add_c: 4891.2
fcmul_add_rvv_f64: 2399.5
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
This commit adds support for VP8 bitstream read methods to the cbs
codec. This enables the trace_headers bitstream filter to support VP8,
in addition to AV1, H.264, H.265, and VP9. This can be useful for
debugging VP8 stream issues.
The CBS VP8 implements a simple VP8 boolean decoder using GetBitContext
to read the bitstream.
Only the read methods `read_unit` and `split_fragment` are implemented.
The write methods `write_unit` and `assemble_fragment` return the error
code AVERROR_PATCHWELCOME. This is because CBS VP8 write is unlikely to
be used by any applications at the moment. The write methods can be
added later if there is a real need for them.
TESTS: ffmpeg -i fate-suite/vp8/frame_size_change.webm -vcodec copy
-bsf:v trace_headers -f null -
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This commit exports the `vp8_token_update_probs` variable to internal
library scope to facilitate its reuse within the library.
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Better performance can probably be achieved with a more intricate
unrolled loop, but this is a start:
add_hfyu_left_pred_bgr32_c: 15084.0
add_hfyu_left_pred_bgr32_rvv_i32: 10280.2
This would actually be cleaner with the RISC-V P extension, but that is
not ratified yet (I think?) and usually not supported if V is supported.
Current code tracks min/max pts for each stream separately; then when
the file ends it combines them with last frame's duration to compute the
total duration of each stream; finally it selects the longest of those
durations as the file duration.
This is incorrect - the total file duration is the largest timestamp
difference between any frames, regardless of the stream.
Also change the way the last frame information is reported from decoders
to the muxer - previously it would be just the last frame's duration,
now the end timestamp is sent, which is simpler.
Changes the result of the fate-ffmpeg-streamloop-transcode-av test,
where the timestamps are shifted slightly forward. Note that the
matroska demuxer does not return the first audio packet after seeking
(due to buggy interaction betwen the generic code and the demuxer), so
there is a gap in audio.
This ensures that tq_receive() will always return EOF after all streams
were receive-finished, even though the sending side might not have
closed them yet. This may allow the receiver to avoid manually tracking
which streams it has already closed.
It is common for subtitle streams to have large gaps between packets.
When the caller is interleaving packets from multiple files, it can
easily happen that two successive subtitle packets trigger this limit,
even though no excessive buffering is happening.
Should fix#7064
With explicit unrolling, we can skip half of the sign bit flips, and
the compiler is then better able to optimise the scalar loop:
predictor_c: 31376.0 (before)
predictor_c: 23703.0 (after)
This is restricted to 128-bit vectors as larger vector sizes could read
past the end of the noise array. Support for future hardware with larger
vector sizes is left for some other time.
hf_apply_noise_0_c: 2319.7
hf_apply_noise_0_rvv_f32: 1229.0
hf_apply_noise_1_c: 2539.0
hf_apply_noise_1_rvv_f32: 1244.7
hf_apply_noise_2_c: 2319.7
hf_apply_noise_2_rvv_f32: 1232.7
hf_apply_noise_3_c: 2541.2
hf_apply_noise_3_rvv_f32: 1244.2
The tested functions treat s_m[i] == 0 as a special case. Other than
that, the functions are slightly complicated vector additions.
This actually makes the zero case happen pseudorandomly.
In my personal opinion, we should not need to support unaligned YUY2
pixel maps. They should always be aligned to at least 32 bits, and the
current code assumes just 16 bits. However checkasm does test for
unaligned input bitmaps. QEMU accepts it, but real hardware dose not.
In this particular case, we can at the same time improve performance and
handle unaligned inputs, so do just that.
uyvytoyuv422_c: 104379.0
uyvytoyuv422_c: 104060.0
uyvytoyuv422_rvv_i32: 25284.0 (before)
uyvytoyuv422_rvv_i32: 19303.2 (after)
This saves three scratch registers and three instructions per line. The
performance gains are mostly negligible. The main point is to free up
registers for further rework.
Fixes OOM when caller keeps adding frames into filtergraph
that reached EOF by other means, for example EOF is signalled
by other filter in filtergraph or by buffersink.
This commit fixes issue with missing SPS/PPS headers in video
encoded by AMF AV1 encoder.
Missing headers leads to broken seek in MPV video player.
Default value for property AV1_HEADER_INSERTION_MODE shouldn't be setup
to NONE (no headers insertion). We need to skip definition of this property,
because default value depends on USAGE property.
Signed-off-by: Dmitrii Ovchinnikov <ovchinnikov.dmitrii@gmail.com>
With 5 accumulator vectors and 6 inputs, this can only use LMUL=2.
Also the number of vector loop iterations is small, just 5 on 128-bit
vector hardware.
The vector loop is somewhat unusual in that it processes data in
descending memory order, in order to save on vector slides:
in descending order, we can extract elements to carry over to the next
iteration from the bottom of the vectors directly. With ascending order
(see in the Opus postfilter function), there are no ways to get the top
elements directly. On the downside, this requires the use of separate
shift and sub (the would-be SH3SUB instruction does not exist), with
a small pipeline stall on the vector load address.
The edge cases in scalar are done in scalar as this saves on loads
and remains significantly faster than C.
autocorrelate_c: 669.2
autocorrelate_rvv_f32: 421.0
Given the size of the data set, strided memory accesses cannot be avoided.
We can still do better than the current code.
ps_hybrid_synthesis_deint_c: 12065.5
ps_hybrid_synthesis_deint_rvv_i32: 13650.2 (before)
ps_hybrid_synthesis_deint_rvv_i64: 8181.0 (after)
Segmented loads may be slower than not. So this advantageously uses a
unit-strided load and narrowing shifts instead.
Before:
ps_add_squares_c: 60757.7
ps_add_squares_rvv_f32: 22242.5
After:
ps_add_squares_c: 60516.0
ps_add_squares_rvv_i64: 17067.7
Fixes: Erroneous HTTP POST instead of HTTP PUT for WebVTT HLS variant playlists.
Signed-off-by: Léon Spaans <leons@gridpoint.nl>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
PGMYUV seems to be always limited range. This was a format originally
invented by FFmpeg at a time when YUVJ distinguished limited from full
range YUV, and this codec never appeared to output YUVJ in any
circumstance, so hard-coding limited range preserves the status quo.
The other formats are explicitly documented to be full range RGB/gray
formats. That said, don't tag them yet, due to outstanding bugs w.r.t
grayscale formats and color range handling.
This change in behavior updates a bunch of FATE tests in trivial ways
(added tagging being the only difference).
When using vf_scale to force a specific output color space, also tag
this on the AVFrame. (Mirroring existing logic for output range)
Move the sanity fix for RGB after the new assignment, to avoid leaking
bogus YUV colorspace metadata for RGB spaces.
No need to write a custom string parser when we can just use an integer
option with preset values. The various bits of fallback logic are wholly
redundant with equivalent logic already inside sws_getCoefficients.
Note: I disallowed setting 'out_color_matrix=auto', because this does
not do anything meaningful in the current code (just hard-codes
AVCOL_SPC_BT470BG fallback).
The documentation states that invalid entries default to SWS_CS_DEFAULT.
A value of 0 is not a valid SWS_CS_*, yet the code incorrectly
hard-codes it to BT.709 coefficients instead of SWS_CS_DEFAULT.
This was a complete hack seemingly designed to work around a different
bug, which was fixed in the previous commit. As such, there is no more
reason not to do this, as it simply breaks changing color range in
sws_setColorspaceDetails for no reason.
More commonly, this fixes the case of sws_setColorspaceDetails after
sws_getContext, since the latter implies sws_init_context.
The problem here is that sws_init_context sets up the range conversion
and fast path tables based on the values of srcRange/dstRange at init
time. This may result in locking in a "wrong" path (either using
unscaled fast path when range conversion later required, or using
scaled slow path when range conversion becomes no longer required).
There are two way outs:
1. Always initialize range conversion and unscaled converters, even if
they will be unused, and extend the runtime check.
2. Re-do initialization if the values change after
sws_setColorspaceDetails.
I opted for approach 1 because it was simpler and easier to reason
about.
Reword the av_log message to make it clear that this special converter
is not necessarily used, depending on whether or not there is range
conversion or YUV matrix conversion going on.
The check if drawing needs to be initialized and supported formats
should be drawable ones was flawed, as pad_stop/pad_start is only
populated from stop_duration/start_duration after these checks.
To fix that, check the _duration variants as well and for better
readability and maintainability break the check out into its own
helper.
Fixes a regression from 86b252ea9dFix#10621
Signed-off-by: Anton Khirnov <anton@khirnov.net>
We calculated offsets as pairs, but addressed them in the shader
as single float values, while reading them as ivec2s.
Also removes unused code (was provisionally added if cooperative matrices
could be used, but that turned out to be impossible).
VK_KHR_PORTABILITY_ENUMERATION_EXTENSION_NAME is required on macOS,
and VK_INSTANCE_CREATE_ENUMERATE_PORTABILITY_BIT_KHR flag should
be set.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Texinfo 7.0 produces quite different HTML to Texinfo 6.8. Without
this change, enumerated option flags (i.e. Possible values of x
are...) render as white text on a white background with Texinfo 7.0
and are unreadable. This change removes a style for the selector
`.table .table` which causes the background to turn white for these
elements. As far as I can tell, it is not actually used anywhere in
files generated by Texinfo 6.8.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Resolves trac ticket #10636 (http://trac.ffmpeg.org/ticket/10636).
Texinfo 7.0, released in November 2022, changed the names of various
functions. Compiling docs with Texinfo 7.0 resulted in warnings and
improperly formatted documentation. More old names appear to have
been removed in Texinfo 7.1, released October 2023, which causes docs
compilation to fail.
This commit addresses the issue by adding logic to switch between the old
and new function names depending on the Texinfo version. Texinfo 6.8
produces identical documentation before and after the patch.
CC
https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1938238.htmlhttps://bugs.gentoo.org/916104
Signed-off-by: Frank Plowman <post@frankplowman.com>
By intent, and in practice, the "active contributor" criterion applies
to the person authoring the commits, not the one pushing them into the
repository.
When operating on large blocks of data it's common to repeatedly use
an instruction on multiple registers. Using the REPX macro makes it
easy to quickly write dense code to achieve this without having to
explicitly duplicate the same instruction over and over.
For example,
REPX {paddw x, m4}, m0, m1, m2, m3
REPX {mova [r0+16*x], m5}, 0, 1, 2, 3
will expand to
paddw m0, m4
paddw m1, m4
paddw m2, m4
paddw m3, m4
mova [r0+16*0], m5
mova [r0+16*1], m5
mova [r0+16*2], m5
mova [r0+16*3], m5
Commit taken from x264:
6d10612ab0
Signed-off-by: Frank Plowman <post@frankplowman.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This uses a more traditional approach allowing up processing of up to
period minus two elements per iteration. This also allows the algorithm
to work for all and any vector length.
As the T-Head C908 device under test can load 16 elements loop, there is
unsurprisingly a little performance drop when the period is minimal and
the parallelism is capped at 13 elements:
Before:
postfilter_15_c: 21222.2
postfilter_15_rvv_f32: 22007.7
postfilter_512_c: 20189.7
postfilter_512_rvv_f32: 22004.2
postfilter_1022_c: 20189.7
postfilter_1022_rvv_f32: 22004.2
After:
postfilter_15_c: 20189.5
postfilter_15_rvv_f32: 7057.2
postfilter_512_c: 20189.5
postfilter_512_rvv_f32: 5667.2
postfilter_1022_c: 20192.7
postfilter_1022_rvv_f32: 5667.2
As in the aligned case, we can use VLSE64.V, though the way of doing so
gets more convoluted, so the performance gains are more modest:
get_pixels_unaligned_c: 126.7
get_pixels_unaligned_rvv_i32: 145.5 (before)
get_pixels_unaligned_rvv_i64: 62.2 (after)
For the reference, those are the aligned benchmarks (unchanged) on the
same T-Head C908 hardware:
get_pixels_c: 126.7
get_pixels_rvi: 85.7
get_pixels_rvv_i64: 33.2
Without this flag, timestamps were embedded into the final
binary if CUDA was enabled.
Signed-off-by: Rob Hall <robxnanocode@outlook.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
We currently mostly do not empty the MMX state in our MMX
DSP functions; instead we only do so before code that might
be using x87 code. This is a violation of the System V i386 ABI
(and maybe of other ABIs, too):
"The CPU shall be in x87 mode upon entry to a function. Therefore,
every function that uses the MMX registers is required to issue an
emms or femms instruction after using MMX registers, before returning
or calling another function." (See 2.2.1 in [1])
This patch does not intend to change all these functions to abide
by the ABI; it only does so for ff_pixelutils_sad_8x8_mmxext, as this
function can by called by external users, because it is exported
via the pixelutils API. Without this, the following fragment will
assert (on x86/x64):
uint8_t src1[8 * 8], src2[8 * 8];
av_pixelutils_sad_fn fn = av_pixelutils_get_sad_fn(3, 3, 0, NULL);
fn(src1, 8, src2, 8);
av_assert0_fpu();
[1]: https://raw.githubusercontent.com/wiki/hjl-tools/x86-psABI/intel386-psABI-1.1.pdf
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is cleaner, but it is also a workaround for when
the header exists, but cannot be compiled.
This will happen when the compiler has no inline asm
support.
Possibly the configure check should be improved as well.
The test can currently pass when _Pragma is not supported, since
_Pragma might be treated as a implicitly declared function.
This happens e.g. with tinycc.
Extending the check to 2 pragmas both matches the actual use
better and avoids this misdetection.
The `-caption_encoding` option was reported as having a default value of
'ass', whereas it's actually 'auto'.
Signed-off-by: zheng qian <xqq@xqq.im>
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
With 128-bit vectors, this is mostly pointless but also harmless.
Performance gains should be more noticeable with larger vector sizes.
neg_odd_64_c: 76.2
neg_odd_64_rvv_i64: 74.7
Up until now each thread had its own buffer pool for extradata
buffers when using frame-threading. Each thread can have at most
three references to extradata and in the long run, each thread's
bufferpool seems to fill up with three entries. But given
that at any given time there can be at most 2 + number of threads
entries used (the oldest thread can have two references to preceding
frames that are not currently decoded and each thread has its own
current frame, but there can be no references to any other frames),
this is wasteful. This commit therefore uses a single buffer pool
that is synced across threads.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, the VAAPI encoder uses fake data with the
AVBuffer-API: The data pointer does not point to real memory,
but is instead just a VABufferID converted to a pointer.
This has probably been copied from the VAAPI-hwcontext-API
(which presumably does it to avoid allocations).
This commit changes this without causing additional allocations
by switching to the RefStruct-pool API. This also fixes an
unchecked av_buffer_ref().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It involves less allocations, in particular no allocations
after the entry has been created. Therefore creating a new
reference from an existing one can't fail and therefore
need not be checked. It also avoids indirections and casts.
Also note that nvdec_decoder_frame_init() (the callback
to initialize new entries from the pool) does not use
atomics to read and replace the number of entries
currently used by the pool. This relies on nvdec (like
most other hwaccels) not being run in a truely frame-threaded
way.
Tested-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It involves less allocations and therefore has the nice property
that deriving a reference from a reference can't fail,
simplifying hevc_ref_frame().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It involves less allocations and therefore has the nice property
that deriving a reference from a reference can't fail.
This allows for considerable simplifications in
ff_h264_(ref|replace)_picture().
Switching to the RefStruct API also allows to make H264Picture
smaller, because some AVBufferRef* pointers could be removed
without replacement.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Very similar to the AVBufferPool API, but with some differences:
1. Reusing an already existing entry does not incur an allocation
at all any more (the AVBufferPool API needs to allocate an AVBufferRef).
2. The tasks done while holding the lock are smaller; e.g.
allocating new entries is now performed without holding the lock.
The same goes for freeing.
3. The entries are freed as soon as possible (the AVBufferPool API
frees them in two batches: The first in av_buffer_pool_uninit() and
the second immediately before the pool is freed when the last
outstanding entry is returned to the pool).
4. The API is designed for objects and not naked buffers and
therefore has a reset callback. This is called whenever an object
is returned to the pool.
5. Just like with the RefStruct API, custom allocators are not
supported.
(If desired, the FFRefStructPool struct itself could be made
reference counted via the RefStruct API; an FFRefStructPool
would then be freed via ff_refstruct_unref().)
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This makes the code more testable as uninitialized fields are 0
and not random values from the last call
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These entries do not correspond to VLC symbols that can be used
they do corrupt various variables like min/max bits
This also no longer assumes that there is a single non subtable
entry
Probably fixes some infinite loops too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 1900031961 + 553590817 cannot be represented in type 'int'
Fixes: 63061/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-5166188298371072
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The check is based on not infinite looping. It is likely
a more strict check can be done
Fixes: Infinite loop
Fixes: 62473/clusterfuzz-testcase-minimized-ffmpeg_BSF_EVC_FRAME_MERGE_fuzzer-5719883750703104
Fixes: 62765/clusterfuzz-testcase-minimized-ffmpeg_dem_EVC_fuzzer-6448531252314112
Fixes: 63378/clusterfuzz-testcase-minimized-ffmpeg_dem_MPEGPS_fuzzer-6504993844494336
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: "Dawid Kozinski/Multimedia (PLT) /SRPOL/Staff Engineer/Samsung Electronics" <d.kozinski@samsung.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is write-only,
because it is hardcoded at the call site. Therefore one can replace
these VLC structures with the only thing that is actually used:
The pointer to the VLCElem table. And in most cases one can even
avoid this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying tables directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For some VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to avoid the relocations inherent in an array
to individual tables; it also reduces padding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_ps_init() initializes some tables for AAC parametric stereo
and some of them are only valid for the fixed- or floating-point
decoder, whereas others (namely VLCs) are valid for both.
The latter are therefore initialized by ff_ps_init_common()
and because the two versions of ff_ps_init() can be run
concurrently, it is guarded by an AVOnce.
Yet now that there is ff_aacdec_common_init_once() there is
a better way to do this: Call ff_ps_init_common()
from ff_aacdec_common_init_once(). That way there is no need
to guard ff_ps_init_common() by an AVOnce any more.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to avoid the relocations inherent in a table
to individual tables; it also reduces padding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It allows to replace code tables of type uint32_t or uint16_t
by symbols of type uint8_t. It is also faster.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The VLCs, their init code and the tables used for initialization
are currently duplicated for the floating- and fixed-point decoders.
This commit stops doing so and moves this stuff to aacdec_common.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table. And in some cases one can even
avoid this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Due to making the decode frames context use the coded size, the
filter started to display those artifacts as it reused the input frame's size.
Change it to instead output the real image size for images, not the input.
h->long_ref isn't guaranteed to be contiguously filled. Use the approach
from both vaapi_h264 and vdpau_h264 which goes through the 16 frames in
h->long_ref to find the LTR entries.
Fixes MR2_MW_A.264 from JVT-AVC_V1.
The fixed-point decoder actually does not use the floating-point
tables initialized by ff_aac_tableinit() at all. So don't
initialize them for it; instead merge initializing these tables
into ff_aac_float_common_init() which is already the function
for the common static initializations of the floating-point
AAC decoder and the (also floating-point) AAC encoder.
Doing so saves also one AVOnce.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They (as well as their init code) are currently duplicated
for the floating- and fixed-point decoders.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is write-only,
because it is hardcoded at the call site. Therefore one can replace
these VLC structures with the only thing that is actually used:
The pointer to the VLCElem table. And in some cases one can even
avoid this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table. And in some cases one can even
avoid this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table. And in some cases one can even
avoid this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and only VLC.table needs to be retained.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Everything besides VLC.table is basically write-only
and even VLC.table can be removed by accessing the
underlying table directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Said object is only allowed to be modified during its
initialization and is immutable afterwards.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For most VLCs here, the number of bits of the VLC is
write-only, because it is hardcoded at the call site.
Therefore one can replace these VLC structures with
the only thing that is actually used: The pointer
to the VLCElem table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These VLCs are very big: The VP3 one have 164382 elements
but due to the overallocation enough memory for 313344 elements
are allocated (1.195 MiB with sizeof(VLCElem) == 4);
for VP4 the numbers are very similar, namely 311296 and 164392
elements. Since 1f4cf92cfb, each
frame thread has its own copy of these VLCs.
This commit fixes this by sharing these VLCs across threads.
The approach used here will also make it easier to support
stream reconfigurations in case of frame-multithreading
in the future.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Also combine the ff_msmp4_dc_(luma|chroma)_vlcs as well
as the tables used to generate them to simplify the code.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These are quite small and therefore force reloads
that can be avoided by modest increases in the number of bits used.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is especially important for frame-threaded decoders like
this one, because up until now each thread had an identical
copy of all these VLC tables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For lots of static VLCs, the number of bits is not read from
VLC.bits, but rather a compile-constant that is hardcoded
at the callsite of get_vlc2(). Only VLC.table is ever used
and not using it directly is just an unnecessary indirection.
This commit adds helper functions and macros to avoid the VLC
structure when initializing VLC tables; there are 2x2 functions:
Two choices for init_sparse or from_lengths and two choices
for "overlong" initialization (as used when multiple VLCs are
initialized that share the same underlying table).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The code above this does a whitelist on desc->flags, which now includes
the (disallowed) AV_PIX_FMT_FLAG_XYZ for XYZ formats. So there is no
more need for a separate check, here.
There are already several places in the codebase that match desc->name
against "xyz", and many downstream clients replicate this behavior.
I have no idea why this is not just a flag.
Motivated by my desire to add yet another check for XYZ to the codebase,
and I'd rather not keep copy/pasting a string comparison hack.
These are not supported by the drawing functions at all, and were
incorrectly advertised as supported in the past.
Note: This check is added only to separate the logic change from the API
change in the following commit, and will be removed again after it
becomes redundant.
Clang versions before 17 (Xcode versions up to and including 15.0)
had a very annoying bug in its behaviour of the ".arch" directive
in assembly. If the directive only contained a level, such as
".arch armv8.2-a", it did validate the name of the level, but it
didn't apply the level to what instructions are allowed. The level
was applied if the directive contained an extra feature enabled,
such as ".arch armv8.2-a+crc" though. It was also applied on the
next ".arch_extension" directive.
This bug, combined with the fact that the same versions of Clang
didn't support the dotprod/i8mm extension names in either
".arch <level>+<feature>" or in ".arch_extension", could lead to
unexepcted build failures.
As the dotprod/i8mm extensions couldn't be enabled dynamically
via the ".arch_extension" directive, someone building ffmpeg could
try to enable them by configuring their build with
--extra-cflags="-march=armv8.6-a".
During configure, we test for support for the i8mm instructions
like this:
# Built with -march=armv8.6-a
.arch armv8.2-a # Has no visible effect here
#.arch_extension i8mm # Omitted as the extension name isn't known
usdot v0.4s, v0.16b, v0.16b
# Successfully assembled as armv8.6-a is the effective level,
# and i8mm is enabled implicitly in armv8.6-a.
Thus, we would enable assembling those instructions. However if
we later check for another extension, such as sve (which those
versions of Clang actually do support), we can later run into the
following situation when building actual code:
# Built with -march=armv8.6-a
.arch armv8.2-a # Has no visible effect here
#.arch_extension i8mm # Omitted as the extension name isn't known
.arch_extension sve # Included as "sve" is as supported extension name
# .arch_extension effectively activates the previous .arch directive,
# so the effective level is armv8.2-a+sve now.
usdot v0.4s, v0.16b, v0.16b
# Fails to build the instructions that require i8mm. Despite the
# configure check, the unrelated ".arch_extension sve" directive
# breaks the functionality of the i8mm feature.
This patch avoids this situation:
- By adding a dummy feature such as "+crc" on the .arch directive
(if supported), we make sure that it does get applied immediately,
avoiding it taking effect spuriously at a later unrelated
".arch_extension" directive.
- By checking for higher arch levels such as armv8.4-a and armv8.6-a,
we can assemble the dotprod and i8mm extensions without the user
needing to pass -march=armv8.6-a. This allows using the dotprod/i8mm
codepaths via runtime detection while keeping the binary runnable
on older versions. I.e. this enables the i8mm codepaths on Apple M2
machines while built with Xcode's Clang.
TL;DR: Enable the I8MM extensions for Apple M2 without the user needing
to do a custom configuration; avoid potential build breakage if a user
does such a custom configuration.
Once Xcode versions that have these issues fixed are prevalent, we
can consider reverting this change.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the scan lines are aligned, we can load each row as a 64-bit value,
thus avoiding segmentation. And then we can factor the conversion or
subtraction.
In principle, the same optimisation should be possible for high depth,
but would require 128-bit elements, for which no FFmpeg CPU flag
exists.
This should hopefully clarify that the option only affects MSZ
full-width characters, and not all full-width ASCII. Additionally,
this matches the prefix with the upstream option.
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
This patch adds two MSZ (Middle Size; half width) character
related options, mapping against newly added upstream
functionality:
* `replace_msz_japanese`, which was introduced in version 1.0.1
of libaribcaption.
* `replace_msz_glyph`, which was introduced in version 1.1.0
of libaribcaption.
The latter option improves bitmap type rendering if specified
fonts contain half-width glyphs (e.g., BIZ UDGothic), even
if both ASCII and Japanese MSZ replacement options are set
to false.
As these options require newer versions of libaribcaption, the
configure requirement has been bumped accordingly.
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
On some environments, a `bool` variable is of smaller size than `int`.
As AV_OPT_TYPE_BOOL is internally handled as sizeof(int), if a `bool`
option was set on such an environment, the memory of following
variables would be filled. Additionally, set values may be destroyed
by av_opt_copy().
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
av_hwframe_transfer_data try with src_ctx first. If the operation
failed with AVERROR(ENOSYS), it will try again with dst_ctx. Return
AVERROR(EINVAL) makes the second step being skipped.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Fixes a validation issue.
The issue is that the function gets called before we've sumitted a frame
for decoding to that context. However, we cannot run queries before
they've been reset, which happens at submission time.
As we'd need to otherwise run a command queue at init-time, just check
if submissions have happened.
Fixes: out of array access
Fixes: rtpdec_h264.c149/poc
Found-by: Hardik Shah of Vehere
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -1028966111 + -1314089526 cannot be represented in type 'int'
Fixes: 63174/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AAC_FIXED_fuzzer-5853273711837184
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Mapping to ITU-R BS.2051-3 "Sound System J" and ITU-R BS.1196-8 "Channel
Configuration 19".
Signed-off-by: Will Wolcott <wwolcott@netflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This layout maps to ITU-R BS.2051-3 "Sound System C" and ITU-R BS.1196-8 "Channel
Configuration 14", and it being the first layout with top layer channels, it's
best to use a different scheme to properly convey the presence and amount of said
channels.
The new name will also be a better fit for the additions in the following commits.
Signed-off-by: James Almer <jamrial@gmail.com>
Only the collocated_ref of the current frame (i.e. HEVCContext.ref)
is ever used*, so move it to HEVCContext directly after ref.
*: This goes so far that collocated_ref was not even synced across
threads in case of frame-threading.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The vidstab library added support in Nov 2020 for writing/reading
the transforms data in binary in addition to ASCII. The library default
was changed to binary format but no changes were made to the AVfilters
resulting in data file for writing or reading being always opened as text.
This effectively broke the filters.
Option added to vidstabdetect to specify file format and open files in
both filters with the correct attributes.
"Validation Error: [ VUID-VkImageViewCreateInfo-imageViewType-04974 ] Object 0: handle = 0x9f9b41000000003c, type = VK_OBJECT_TYPE_IMAGE; | MessageID = 0xc120e150 | vkCreateImageView():
Using pCreateInfo->viewType VK_IMAGE_VIEW_TYPE_2D and the subresourceRange.layerCount VK_REMAINING_ARRAY_LAYERS=(17) and must 1 (try looking into VK_IMAGE_VIEW_TYPE_*_ARRAY).
The Vulkan spec states: If viewType is VK_IMAGE_VIEW_TYPE_1D, VK_IMAGE_VIEW_TYPE_2D, or VK_IMAGE_VIEW_TYPE_3D; and subresourceRange.layerCount is VK_REMAINING_ARRAY_LAYERS,
then the remaining number of layers must be 1"
Partially fixes https://streams.videolan.org/issues/19938/20000_20180305-15.04.59.ts
The is coded as 1920x1080, meant to be rendered at 1440x1080 with cropping,
or 1680x1080 before cropping. Currently, the created DPB is 1440x1080, which results
in the image being decoded incorrectly, as the decoder overwrites output memory.
This commit fixes this.
This eases actual development of the assembly functions, by only
allowing extension instructions within the sections that explicitly
enable them, instead of having all extensions enabled everywhere.
Signed-off-by: Martin Storsjö <martin@martin.st>
When users zero-init'd the struct, or left it as-is, the encode
queue family matched the graphics queue family, which led it to be
incorrectly logged as being used for encode.
This just improves the logging so this isn't printed anymore.
GetStdHandle is unavailable outside of the desktop API subset.
This didn't use to be a problem with earlier WinSDKs, as kbhit also
used to be available only for desktop apps, and this whole section is
wrapped in #if HAVE_KBHIT. With newer WinSDKs, kbhit() is available also
for non-desktop apps, while GetStdHandle still isn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is unnecessary since the removal of non-thread-safe callbacks
in e0786a8eeb. Since then, the
AVCodecContext has only been used as logcontext.
Removing ff_thread_release_buffer() allowed to remove AVCodecContext*
parameters from several other functions (not only unref functions,
but also e.g. ff_h264_ref_picture() which calls ff_h264_unref_picture()
on error).
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
At various points through the function librsvg_decode_frame, errors are
returned from immediately without deallocating any allocated structs.
This patch both fixes those leaks, and also fixes the use of functions
that are deprecated since librsvg version 2.52.0. The older calls are
still used, guarded by #ifdefs while the newer replacements are used if
librsvg >= 2.52.0. One of the deprecated functions is used as a check
for the configure shell script, so it was replaced with a different
function.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
libavcodec/aarch64/vc1dsp_neon.S is skipped here, as it intentionally
uses a layered indentation style to visually show how different
unrolled/interleaved phases fit together.
Signed-off-by: Martin Storsjö <martin@martin.st>
Favour left aligned columns over right aligned columns.
In principle either style should be ok, but some of the cases
easily lead to incorrect indentation in the surrounding code (see
a couple of cases fixed up in the preceding patch), and show up in
automatic indentation correction attempts.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some functions have slightly different indentation styles; try
to match the surrounding code.
libavcodec/aarch64/vc1dsp_neon.S is skipped here, as it intentionally
uses a layered indentation style to visually show how different
unrolled/interleaved phases fit together.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fix rendering of int values within a side data element, which was
broken since commit d2d3a83ad9, where the side data element was
correctly marked as a variable fields element. Logic to render a
string variable was implemented already, but it was not implemented
for the int fields path, which was enabled by that commit.
Also, code and schema is changed in order to account for multiple
variable-fields elements - such as side data, contained within the
same parent. Previously it was assumed that a single variable-fields
element was contained within the parent, which was the case for tags,
but is not the case for side-data.
Previously data was rendered as:
<side_data_list>
<side_data side_data_type="CPB properties" max_bitrate="0" min_bitrate="0" avg_bitrate="0" buffer_size="327680" vbv_delay="-1"/>
</side_data_list>
Now as:
<side_data_list>
<side_data type="CPB properties">
<side_datum key="side_data_type" value="CPB properties"/>
<side_datum key="max_bitrate" value="0"/>
<side_datum key="min_bitrate" value="0"/>
<side_datum key="avg_bitrate" value="0"/>
<side_datum key="buffer_size" value="49152"/>
<side_datum key="vbv_delay" value="-1"/>
</side_data>
</side_data_list>
Variable-fields elements are rendered as a containing element wrapping
generic key/values elements, enabling use of strict XML schema.
Fix trac issue:
https://trac.ffmpeg.org/ticket/10613
This logic only covers the case of yuv420p. Extend this logic to cover
*all* vertically subsampled YUV formats, which require the same
interlaced scaling logic.
Fortunately, we can get away with re-using the same code for both JPEG
and MPEG range YUV, because the only difference here is the horizontal
alignment. (Which I omit touching for now, to avoid introducing possibly
unintended changes in default behavior)
1. If user don't specify the profile, set it to main10 when pixel
format is 10 bits. Before the patch, videotoolbox output main
profile bitstream with 10 bit input, which can be confusing.
2. Warning when user set profile to main explicitly with 10 bit
input. It works, but not the best choice.
3. Reject main 10 profile with 8 bit input, it doesn't work.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Will be used in the following patch. With hw_config we can get
avctx->hw_frames_ctx, and with avctx->hw_frames_ctx we get
sw_pix_fmt. Otherwise sw_pix_fmt is none. I need sw_pix_fmt
before get the first frame to set hevc encoder profile.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
In f7ac3512f5 the size of the dynamically
allocated buffer was shrunk, but it was made too small for very small
alphabet sizes. This patch restores the size to prevent an OOB read.
Reported-by: Cole Dilorenzo <coolkingcole@gmail.com>
Signed-off-by: Leo Izen <leo.izen@gmail.com>
EAGAIN causes an assertion failure when it is returned from the decoder
Fixes: Assertion consumed != (-(11)) failed at libavcodec/decode.c:462
Fixes: assertion_IOT_instruction_decode_c_462/poc
Found-by: Hardik Shah of Vehere (Dawn Treaders team)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 1496950099 + 728014168 cannot be represented in type 'int'
Fixes: 62667/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MJPEGB_fuzzer-6511785170305024
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -2146469728 - 1488954 cannot be represented in type 'int'
Fixes: 62490/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BONK_fuzzer-5612782399389696
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The libmfx deprecation warning tells you to build against libmfx 1.x,
but the actual solution is to use --enable-libvpl instead of using
--enable-libmfx. Update the warning message to reflect this.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
They are generally set in ff_mpv_init_context_frame()
(mostly called by ff_mpv_common_init()); setting them
somewhere else should be avoided.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unused by ff_mpeg4_decode_picture_header() (unsurprisingly given
that when decoding this function is called before the context has been
initialized).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
(The return value doesn't really matter: For video decoders
every return value >= 0 is treated as "consumed all of the input".)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This patch makes the libkvazaar encoder respect color settings that are
present on the codec context, including color range, primaries, transfer
function and colorspace.
0cd8769207 utilized the rc_algorithm member of the kvz_config struct, which
was introduced in Kvazaar 2.0.0. This patch bumps the minimum version of
Kvazaar to 2.0.0 so that FFmpeg compiles successfully.
Signed-off-by: John Mather <johnmather@sidefx.com>
An AVFormatContext leaks on errors that happen before it is attached
to its permanent place (an InputFile). Fix this by attaching
it earlier.
Given that it is not documented that avformat_close_input() is usable
with an AVFormatContext that has only been allocated with
avformat_alloc_context() and not opened with avformat_open_input(),
one error path before avformat_open_input() had to be treated
specially: It uses avformat_free_context().
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The av_opt_eval family of functions emits errors messages on error
and can therefore not be used with fake objects when the AVClass
has a custom item_name callback. The AVClass for AVCodecContext
has such a custom callback (it searches whether an AVCodec is set
to use its name). In practice it means that whatever is directly
after the "cc" pointer to the AVClass for AVCodec in the stack frame
of ist_add() will be treated as a pointer to an AVCodec with
unpredictable consequences.
Fix this by using an actual AVCodecContext instead of a fake object.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Its function is analogous to that of the fps filter, so filtering is a
more appropriate place for this.
The main practical reason for this move is that it places the encoding
sync queue right at the boundary between filters and encoders. This will
be important when switching to threaded scheduling, as the sync queue
involves multiple streams and will thus need to do nontrivial
inter-thread synchronization.
In addition to framerate conversion, the closely-related
* encoder timebase selection
* applying the start_time offset
are also moved to filtering.
That field is used by the framerate code to track whether any output has
been generated for the last input frame(*). Its use in the last
invocation of print_report() is meant to account for the very last
filtered frame being dropped in the number of dropped frames printed in
the log. However, that is a highly inappropriate place to do so, as it
makes assumptions about vsync logic in completely unrelated code. Move
the increment to encoder flush instead.
(*) the name is misleading, as the input frame has not yet been dropped
and may still be output in the future
Always use the functionality of the latter, which makes more sense as it
avoids losing keyframes due to vsync code dropping frames.
Deprecate the 'source_no_drop' value, as it is now redundant.
Unlike the 'source' mode, which preserves source keyframe-marking as-is,
the 'source_no_drop' mode attempts to keep track of keyframes dropped by
framerate conversion and mark the next output frame as key in such
cases. However,
* c75be06148 broke this functionality entirely, and made it equivalent
to 'source'
* even before it would only work when the frame immediately following
the dropped keyframe is preserved and not dropped as well
Also, drop a redundant check for 'frame' in setting dropped_keyframe, as
it is redundant with the check on the above line.
ifilter_send_eof() will fail if the input has no real or fallback
parameters, so there is no need to handle the case of some inputs being
in EOF state yet having no parameters.
Since at least commit c954cf1e1b
(adding ff_encode_alloc_frame()), a large part of ff_alloc_picture()
is completely separate for the two callers. Move the caller-specific
parts out to the callers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unnecessary in case of user-supplied frames, because
it happens directly after a av_frame_ref() with the same
src and dst.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_alloc_picture() performs two tasks: a) In most instances,
it allocates frame buffers and b) it allocates certain
auxiliary buffers.
The exception to a) is the case when the encoder can reuse
user-supplied frames. And for these frames the auxiliary buffers
are unused, because this frame will never be used as current_picture
(and therefore also not as next_picture or last_picture);
see select_input_picture().
This means that we can simply avoid calling ff_alloc_picture()
with user-supplied frames at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
None of the mpegvideo encoders support anything but coded frames;
and if this were to change, it is unclear whether they would need
the adjustment here. So remove it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case "!direct" we are not reusing the input buffers
(due to e.g. insufficient alignment), but allocating
new ones. These of course do not alias with the ones
provided by the user, so these checks are always-false.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
mpegvideo_enc uses a fixed-size array of Pictures; a slot is
considered taken if the Picture's AVFrame is set.
When an error happens after a slot has been taken, this Picture
has typically not been reset and is therefore not usable for
future requests. The code aborts when one runs out of slots
and this can happen in case of allocation failures.
Fix this by always unreferencing a Picture in case of errors.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The custom-allocator logic has been completely defunct since a while,
since nothing depends on those targets, they never get used.
This updates jemalloc to pkg-config, adds the fallback option for
potential arbitrary allocators, and finally actually adds the libraries
to LDFLAGS.
The gather index vector is only used as double-length (due to register
pressure), so no need to initialise it for quad-length. Basically this
matches the multiplier in the prologue to the the multipler in the loop.
And stop setting picture_number which was only done to not parse
extradata multiple times.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: signed integer overflow: 0 - -9223372036854775808 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_IO_DEMUXER_fuzzer-6112289464123392
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -9223372036315799520 - 3873890816 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5009302746431488
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 9223372036630775808 + 1000000000 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_WEBM_DASH_MANIFEST_fuzzer-5406131992526848
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 155 + 9223372036854775655 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_W64_fuzzer-5364032278495232
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 2147483647 + 1 cannot be represented in type 'int32_t' (aka 'int')
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_RPL_fuzzer-6086131095830528
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -9223372036854775808 - 9222726413022000000 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-5959420033761280
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 22014562800 * 934633746 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_JACOSUB_fuzzer-5189603246866432
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 9230955872951340 - -9223372036854775808 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_SBG_fuzzer-6330481893572608
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Avoids allocations and error checks as well as the boilerplate
code for creating an AVBuffer with a custom free callback.
Also increases type safety.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Tested-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids allocations and error checks and allows to remove
cleanup code for earlier allocations. Also avoids casts
and indirections.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that the RefStruct API relies on the user to know
the size of the objects and does not provide a way to get it,
we need to store the number of elements allocated ourselves;
but this is actually better than deriving it from the size
in bytes.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids allocations and therefore error checks: Syncing
hwaccel_picture_private across threads can't fail any more.
Also gets rid of an unnecessary pointer in structures and
in the parameter list of ff_hwaccel_frame_priv_alloc().
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Lynne <dev@lynne.ee>
Tested-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The SEI message code uses the AVBuffer API for its SEI messages
and contained buffers (like the extension buffer for HEVC
or the user data (un)registered payload buffers).
Contrary to the ordinary CBS code (where some of these
contained buffer references are actually references
to the provided AVPacket's data so that one can't replace
them with the RefStruct API), the CBS SEI code never uses
outside buffers at all and can therefore be switched entirely
to the RefStruct API. This avoids the overhead inherent
in the AVBuffer API (namely the separate allocations etc.).
Notice that the refcounting here is actually currently unused;
the refcounts are always one (or zero in case of no refcounting);
its only advantage is the flexibility provided by custom
free functions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids allocations and error checks etc. as well
as duplicate pointer lists in the CodedBitstreamFooContexts.
It also avoids casting const away for use as opaque,
as the RefStruct API supports const opaques.
The fact that some of the units are not refcounted
(i.e. they are sometimes part of an encoding context
like VAAPIEncodeH264Context) meant that CodedBitstreamUnit
still contains two pointers, one to the content
and another ownership pointer, replacing the AVBufferRef* pointer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids allocations and the corresponding error checks.
Also avoids casts and indirections.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids allocations and the corresponding error checks.
It also avoids indirections and casts.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids allocations and error checks when syncing the buffers.
Also avoids indirections.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids allocations and error checks for these allocations;
e.g. syncing buffers across threads can't fail any more
and needn't be checked. It also gets rid of casts and
indirections.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids allocations and error checks for these allocations;
e.g. syncing buffers across threads can't fail any more
and needn't be checked. It also avoids having to keep
H264ParamSets.pps and H264ParamSets.pps_ref and PPS.sps
and PPS.sps_ref in sync and gets rid of casts and indirections.
(The removal of these checks and the syncing code even more
than offset the additional code for RefStruct.)
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids allocations and frees and error checks for said allocations;
also avoids a few indirections and casts.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For now, this API is supposed to replace all the internal uses
of reference counted objects in libavcodec; "internal" here
means that the object is created in libavcodec and is never
put directly in the hands of anyone outside of it.
It is intended to be made public eventually, but for now
I enjoy the ability to modify it freely.
Several shortcomings of the AVBuffer API motivated this API:
a) The unnecessary allocations (and ensuing error checks)
when using the API. Besides the need for runtime checks it
imposes upon the developer the burden of thinking through
what happens in case an error happens. Furthermore, these
error paths are typically not covered by FATE.
b) The AVBuffer API is designed with buffers and not with
objects in mind: The type for the actual buffers used
is uint8_t*; it pretends to be able to make buffers
writable, but this is wrong in case the buffer is not a POD.
Another instance of this thinking is the lack of a reset
callback in the AVBufferPool API.
c) The AVBuffer API incurs unnecessary indirections by
going through the AVBufferRef.data pointer. In case the user
tries to avoid this indirection and stores a pointer to
AVBuffer.data separately (which also allows to use the correct
type), the user has to keep these two pointers in sync
in case they can change (and in any case has two pointers
occupying space in the containing context). See the following
commit using this API for H.264 parameter sets for an example
of the removal of such syncing code as well as the casts
involved in the parts where only the AVBufferRef* pointer
was stored.
d) Given that the AVBuffer API allows custom allocators,
creating refcounted objects with dedicated free functions
often involves a lot of boilerplate like this:
obj = av_mallocz(sizeof(*obj));
ref = av_buffer_create((uint8_t*)obj, sizeof(*obj), free_func, opaque, 0);
if (!ref) {
av_free(obj);
return AVERROR(ENOMEM);
}
(There is also a corresponding av_free() at the end of free_func().)
This is now just
obj = ff_refstruct_alloc_ext(sizeof(*obj), 0, opaque, free_func);
if (!obj)
return AVERROR(ENOMEM);
See the subsequent patch for the framepool (i.e. get_buffer.c)
for an example.
This API does things differently; it is designed to be lightweight*
as well as geared to the common case where the allocator of the
underlying object does not matter as long as it is big enough and
suitably aligned. This allows to allocate the user data together
with the API's bookkeeping data which avoids an allocation as well
as the need for separate pointers to the user data and the API's
bookkeeping data. This entails that the actual allocation of the
object is performed by RefStruct, not the user. This is responsible
for avoiding the boilerplate code mentioned in d).
As a downside, custom allocators are not supported, but it will
become apparent in subsequent commits that there are enough
usecases to make it worthwhile.
Another advantage of this API is that one only needs to include
the relevant header if one uses the API and not when one includes
the header or some other component that uses it. This is because there
is no RefStruct type analog of AVBufferRef. This brings with it
one further downside: It is not apparent from the pointer itself
whether the underlying object is managed by the RefStruct API
or whether this pointer is a reference to it (or merely a pointer
to it).
Finally, this API supports const-qualified opaque pointees;
this will allow to avoid casting const away by the CBS code.
*: Basically the only exception to the you-only-pay-for-what-you-use
rule is that it always uses atomics for the refcount.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only used by encoders; this unfortunately necessitated
to add separate allocations to the SVQ1 encoder which uses
motion estimation without being a full member of mpegvideo.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is no longer needed as the side data is available for decoders in the
AVCodecContext.
The tests affected reflect the removal of useless CPB and Stereo 3D side
data in packets.
Signed-off-by: James Almer <jamrial@gmail.com>
The changed references for fate-hevc-dv-rpu fate-mov-zombie happen because,
unlike ffmpeg and ffplay, ffprobe never injected packet side data, so the
display matrix side data at the container level is now present in the output
frames.
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecate AVStream.side_data and its helpers in favor of the AVStream's
codecpar.coded_side_data.
This will considerably simplify the propagation of global side data to decoders
and from encoders. Instead of having to do it inside packets, it will be
available during init().
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
This will simplify the propagation of side data to decoders and from encoders.
Global side data will now reside in the AVCodecContext, thus be available
during init(), removing the need to propagate it inside packets.
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
Handling AVPacketSideData directly, which can used on structs other than
AVPacket.
This will be useful in the following commits.
Signed-off-by: James Almer <jamrial@gmail.com>
Drop reference to constants removed in 94eed68ace.
In particular, rename me_method to me_quality and add description for
supported values.
Address trac issue:
http://trac.ffmpeg.org/ticket/10003
In particular, clarify that it can either be set as a field of
AVCodecContext or as an x264 option, using a different specification.
Should address trac issue:
http://trac.ffmpeg.org/ticket/3947
The spec caps the prefix alphabet size to 32768 (i.e. 1 << 15) so we
should check for that and reject alphabets that are too large, in order
to prevent over-allocating.
Additionally, there's no need to allocate buffers that are as large as
the maximum alphabet size as these aren't stack-allocated, they're heap
allocated and thus can be variable size.
Added an overflow check as well, which fixes leaking the buffer, and
capping the alphabet size fixes two potential overruns as well.
Fixes: out of array access
Fixes: 62089/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-
5437089094959104.fuzz
Found-by: continuous fuzzing process
https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Found-by: Hardik Shah of Vehere (Dawn Treaders team)
Co-authored-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Leo Izen <leo.izen@gmail.com>
This patch will cause the parser to abort if it detects an icc profile
with an invalid size. This is particularly important if the icc profile
is entropy-encoded with zero bits per symbol, as it can prevent a
seemingly infinite loop during parsing.
Fixes: infinite loop
Fixes: 62374/clusterfuzz-testcase-minimized-ffmpeg_IO_DEMUXER_fuzzer
-5551878085410816
Found-by: continuous fuzzing process
https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reported-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Also, avoid spurious end-of-line after side data entries, and improve
rendering of compact output, by adding an indication of the side data
type for each entry.
Also fixes issue:
http://trac.ffmpeg.org/ticket/9266
Do not use put_sbits() where only unsigned is stored.
Reduce size of data_check_present field.
Reduce size of table of codebook_extremes[].
Avoid anonymously typedeffed structs.
Use encoder private context to store parameters.
Fix wrapping when calculating offsets.
Restructure arrays in encoder private context so to keep
arrays belonging to same subblock into separate structure.
Disable matrix coefficients as they are sometimes
producing wrong results.
Fixes multiplane support on Nvidia.
Also, remove the ENCODE usage, even if the driver signals it as supported.
Currently, it's not used, and when it is used, it'll be gated behind
two extension checks.
Some clips (i.e. SLIST_B_Sony_9) will use PPS 0 and 8, before PPS 1-7.
vulkan_hevc expects {sps,pps,vps}_list to be filled in order, which
causes PPS 8 to not be added to the Vulkan session params when it is
being used by a picture.
This removes the expectation that these lists are filled in order. The
indicies into vps_list are saved since there are multiple usages of it.
This also fixes a bug with some clips (i.e. PPS_A_qualcomm_7) which use
all 64 available PPS slots, causing the old loop to think there are more
than 64 PPS-es.
SVT-AV1 does not support requesting keyframes at arbitrary points
by setting pic_type to EB_AV1_KEY_PICTURE. So set force_key_frames
to 1 only when gop_size == 1.
Please see the comments in
https://gitlab.com/AOMediaCodec/SVT-AV1/-/issues/2076 for a bit more
details.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
It has currently not been done for H263, H263P and MPEG4.
Doing so avoids having to initialize the IDCT permutation
lateron when decoding packets in order to be able to parse
a quant matrix; it means that every mpegvideo decoder always
has an initialized IDCTDSPContext after init.
Initializing is done generically in ff_mpv_decode_init().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, ff_mpeg_update_thread_context() zeroes
the context to initialize on initialization failure.
This has been added in e1d7d4bd13.
Just as now, ff_mpeg_update_thread_context() simply
copied the src MpegEncContext over the dst MpegEncContext
to initialize it, but clear_context() was only added in
b160fc290c, so that cleaning up
on init failure was a minefield if performed.
It was not always performed, namely not before the first
allocation needed to be freed. In the fuzzer sample that
led to e1d7d4bd13, the call
to av_image_check_size() failed and before said commit,
the context contained lots of pointers from the src context,
leading to assert violations lateron.
Of course, the proper fix for this is resetting the pointers
(or even better, not copying them in the first place), so
this zeroing is unnecessary since commit
b160fc290c. It is also harmful,
because it makes initializing something only once during init
more complicated; See the h264chroma handling in the diff
for an example. Therefore it is removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Before 998c9f15d1, the IDCTDSPContext
has only been initialized in ff_mpv_common_init() which is deferred
until immediately before decoding a picture; to nevertheless parse
the quant matrices in sequence headers or quant matrix extensions,
a dummy (identity) permutation has been stored in the codec's init
function; after ff_mpv_common_init() which could change the permutation
the matrices were repermutated.
Yet since said commit, the IDCTDSPContext is initialized during init
and does not change afterwards (unless the user forces different CPU
flags), so there is no need to reinitialize it; the repermutation code
can be removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array access
Fixes: 62164/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ESCAPE124_fuzzer-6035022714634240
Fixes: 62164/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ESCAPE124_fuzzer-6422176201572352
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -2147483506 + -801380 cannot be represented in type 'int'
Fixes: 62164/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-6578985923117056
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 148676193 - -2006512262 cannot be represented in type 'int'
Fixes: 62164/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WAVARC_fuzzer-5963163952349184
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -1364715454 + -1468954671 cannot be represented in type 'int'
Fixes: 62093/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AAC_FIXED_fuzzer-5538774254485504
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 62171/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AAC_FIXED_fuzzer-5644657180409856
Fixes: signed integer overflow: 2 * 1079352273 cannot be represented in type 'int'
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 4 * 2307917133220067266 cannot be represented in type 'long'
Fixes: 62164/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FLAC_fuzzer-6307690022043648
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 538976288 - -9223372036854775808 cannot be represented in type 'long'
Fixes: 62164/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FLAC_fuzzer-6275845531238400
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
the type is also changed to int as it is interpreted as int in av_get_packet()
Fixes: signed integer overflow: 2147483647 + 1 cannot be represented in type 'int'
Fixes: 50993/clusterfuzz-testcase-minimized-ffmpeg_dem_WSVQA_fuzzer-6593408795279360
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_WSVQA_fuzzer-4613908817903616
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 4481246996173000000 - -4778576820000000000 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_SBG_fuzzer-5063670588899328
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 91542414454000000 - -9154241494546000000 cannot be represented in type 'long'
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_CONCAT_fuzzer-4739147999084544
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This revectors the inner loop to reverse vectors element in vectors,
thus eliminating the negative register stride. Note that RVV does not
have a vector reverse instruction, so this uses a gather.
It is already done generically in update_context_from_thread()
before this function is called.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This has been done for the luma plane of missing FLV1 and H263
references.
Also remove code duplication by reusing gray_frame(), which
has been renamed to color_frame() for this purpose.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes segfaults with -debug +nomc -flags +gray (presuming
a build with --enable-gray).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In this case any timestamps are guessed by compute_pkt_fields() in
libavformat. Since we are decoding the stream, we have more accurate
information from the decoder and do not need any guesses.
Eliminates spurious PTS gaps in a number of FATE tests.
Also avoids dropping the majority of frames in fate-dirac*
* export AVCodecParserContext.picture_structure.
* when there are two field pictures in the packet, set
the interlacing parameters accordingly:
* repeat_pict=1 and picture_structure=FRAME to indicate 2 fields
* field_order to indicate the first field of the two
The demuxer does not set packet timestamps itself after
c6b6356635 and instead relies on the
parser to do it. However, this does not matter from the caller
perspective as it still happens inside the demuxer. The demuxer should
thus not be flagged as not having timestamps.
The parser does not have a timebase associated with it, so in general it
makes no sense for it to be exporting durations. Longer-term this
should be handled more cleanly with a new parser API.
It dates back to pre-2005 days, when people generally tended to commit
their work directly without going through the mailing list. Few
developers do it today, and never outside of their standalone modules.
This item is thus confusing and misleading and is better removed.
The section consistes of a single short paragraph linking to other
chapters. The enclosing chapter also has no other sections, all other
text is placed in the chapter directly.
Keeping a separate section for this paragraph just adds more clutter.
Instead, use forward declarations; and in order not to affect
any user include these headers for them, but not internally.
This has the advantage of removing implicit inclusions of these
headers from almost all files providing codecs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is of no value to the user, because every muxer can always
be flushed with a NULL packet. As its documentation shows
("If not set, the muxer will not receive a NULL packet in
the write_packet function") it is actually an internal flag
that has been publically exposed because there was no internal
flags field for output formats for a long time. But now there is
and so use it by replacing the public flag with a private one.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Buggy ICCv4 profiles are unfortunately used in the wild, and it's quite
easy to work around them by just forcing the white point to the correct
value. Display a warning just in case.
See-Also: https://trac.ffmpeg.org/ticket/9673
This is mathematically equivalent to what we were doing before, but
gives subtly different results due to rounding (rows first vs columns
first). Doing it this way makes our film grain database generation match
reference implementation and now produces bit-exact outputs in my
testing.
Rename the transposed variables to be a bit less confusing.
When linking the main tools, the object files to link are set up
via the variable OBJS-<name>, but for the tools, we've only
used the target's list of dependencies.
In most cases, this has been fine, but it has caused specifying
the libraries to link in a duplicate fashion; the linking command
has looked like this:
$CC -Llibavutil ... tools/tool.o libavutil/libavutil.a -lavutil
Normally, the libraries to link are handled with "-Llibavutil -lavutil";
when linking the main fftools, this is how they are linked.
In the case of the binaries under the "tools" directory (within the
make variable TOOLS), we've passed the full set of dependencies
to the linker, via $^, which does contain the names of the
dependency libraries as well.
When libraries are built as regular static libraries, or shared
unix libraries, this has all worked fine. When libraries are
built as DLLs for Windows, though, the norm is not to pass the
actual DLL to the linker, but an import library.
Mingw tools generally can handle linking directly against a DLL
as well, but MSVC tools don't support that, and error out with
a very cryptic error message:
libavdevice\avdevice.dll : fatal error LNK1107: invalid or corrupt file: cannot read at 0x2D8
By omitting these parts of the dependencies, linking of these tool
executables succeed in MSVC builds with shared libraries enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is slower than the Zbb version on real hardware due to register
strides. Proper support for vector byte-swap requires the Zvbb
extension, but it's much too early for me to worry about it.
Put it into an encoder-specific context with a SnowContext
at its front. This also avoids having to include mpegvideo.h
in snow.c and snowdec.c.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We have to write an explicit BlockDuration element (and use
a BlockGroup instead of a SimpleBlock) in case the Track
has a DefaultDuration that is inconsistent with the duration
of the packet.
The matroska-h264-remux test uses a file with coded fields
where the duration of a Block is the duration of a field,
not of a frame, therefore this patch writes said BlockDuration
elements.
(When using a BlockGroup, one has to add ReferenceBlock elements
to distinguish keyframes from non-keyframes. Unfortunately,
the AV1 codec mapping [1] requires us to reference all references
and to really use the real references, which requires a lot of
effort for basically no gain. When BlockGroups are used with AV1,
the created files are most likely invalid, both before and after
this patch, but this patch makes this more likely to happen.)
[1]: https://github.com/ietf-wg-cellar/matroska-specification/blob/master/codec/av1.md
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They were replaced by TX from libavutil; the tremendous work
to get to this point (both creating TX as well as porting
the users of the components removed in this commit) was
completely performed by Lynne alone.
Removing the subsystems from configure may break some command lines,
because the --disable-fft etc. options are no longer recognized.
Co-authored-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It more directly shows that ff_flac_decode_frame_header() does not
modify the AVCodecContext given to it at all; and it would not be
allowed to do so, given that it is used by the parser when it is
still unknown whether said frame header is even valid.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular the encoder used only a small part of the context:
The new encoder context is only 128B here. It used to be 32992.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When using frame threading, the FFV1 decoder's update_thread_context()
function copies the whole context and afterwards restores some allocated
fields with backups made earlier. Among these fields are the
ThreadFrames and the source context's ThreadFrames can change
concurrently without any synchronization, leading to data races which
are undefined behaviour even if they don't lead to problems in
practice (as the destination's own ThreadFrames are restored directly
thereafter).
Fix this by only copying the actually needed fields.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
After the AVFrame has been wrapped into a buffer,
it is owned by the buffer and must not be freed manually
any more. Yet this happens on subsequent errors.
This bug was introduced in 6ca43a9675.
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Suggested-by: Tomas Härdin <git@haerdin.se>
Fixes: 51896/clusterfuzz-testcase-minimized-ffmpeg_dem_MXF_fuzzer-5130394286817280
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The AVDCT API used by this filter does in no way depend
upon the FFT subsystem.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The spec specified indices in the order [x][y], but our code follows the
traditional C convention of [y][x]. This was not correctly account for
when calculating the base index of the grain database access.
The spec specifies x^31 + x^3 + 1 as the polynomial, but the diagram in
Figure 1-1 omits the +1 offset. The initial implementation was based on
the diagram, but this is wrong (produces subtly incorrect results).
It does not make much sense to me, but GCC somehow optimises the
inline assembler even though the output is very obviously used and
having observable side effects.
This reverts commit 09731fbfc3.
In this logical branch, fq->queued and fq->allocated must be equal.
Deleting this code will make it easier to understand the logic
(copy the data before tail to the newly requested space)
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
ff_sbr_noise_table is only used by SBR DSP code
and sbrdsp.h is the header providing its declaration.
Furthermore, this ensures that checkasm does not pull
the whole AAC SBR and PS code in.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are not common.
Furthermore, this file is pulled in when linking checkasm and
up until now, the calls to ff_get_buffer() and av_codec_is_decoder()
caused all of libavcodec to be pulled in as well. Besides being
bad size-wise this also has the downside that it pulls in
avpriv_(cga|vga16)_font from libavutil which are marked as
being imported from another library when building libavcodec
as a DLL; this breaks checkasm because it links both lavc and lavu
statically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The part of said function that is common to both encoder and decoder
is negligible since c954cf1e1b
and more than offset by the costs of "Am I an encoder?" checks.
So move allocating the frames to the encoder and decoder directly.
Also rename ff_snow_frame_start() to ff_snow_frames_prepare(),
because a frame without a buffer has not been properly started.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This function is used by the AARCH64 code to filter a few
remaining lines in case the dimensions are not suitably
aligned; it is furthermore also used by checkasm to actually
test the AARCH64 code against. But it is normally not used
and this patch therefore moves it in bwdifdsp.h as a static
inline function so that it can be avoided if possible
or inlined where necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise checkasm/vf_bwdif.c pulls in vf_bwdif.c and
then all of libavfilter. Besides being bad size-wise
this also has the downside that it pulls in
avpriv_(cga|vga16)_font from libavutil which are marked
as being imported from another library when building
libavfilter as a DLL and this breaks checkasm because
it links both lavfi and lavu statically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This already avoids unnecessary indirectly included headers
in the arch-specific vf_bwdif_init.c files; it is also in
preparation for splitting the actual functions out of vf_bwdif.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Dnn models has different data preprocess requirements. Scale and mean
parameters are added to preprocess input data.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Dnn models have different input layout (NCHW or NHWC), so a
"layout" option is added
Use openvino's API to do layout conversion for input data. Use swscale
to do layout conversion for output data as openvino doesn't have
similiar C API for output.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Applying film grain happens after ff_thread_finish_setup(),
so the parameters synced in hevc_update_thread_context() must not
be modified. But this is exactly what happens in case applying
film grain fails. (The likely result is that in case of frame threading
an uninitialized frame is output.)
Given that it is actually very easy to know in advance whether
ff_h274_apply_film_grain() supports a given set of parameters,
one can check for this before ff_thread_finish_setup()
and avoid allocating an unused buffer lateron.
Reviewed-by: Niklas Haas <ffmpeg@haasn.xyz>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
From the documentation of GNU awk [1]:
"In most awk implementations, including gawk, rand() starts generating
numbers from the same starting number, or seed, each time you run awk.45
Thus, a program generates the same results each time you run it. The
numbers are random within one awk run but predictable from run to run.
This is convenient for debugging, but if you want a program to do
different things each time it is used, you must change the seed to a
value that is different in each run. To do this, use srand()."
This commit does exactly this.
[1]: https://www.gnu.org/software/gawk/manual/html_node/Numeric-Functions.html#index-rand_0028_0029-function
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Instead use float one by default for sample rate conversions.
The s16p internal transfer format produces visible and hearable
quantization artifacts.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
for S8 we continue to use S16 as it should have enough precision
Fate is adjusted so bitexactness is maintained between mips/arm/x86
if more tests became bit-inexact on some platform, the same change
can be done to them
The use of higher precision and float intermediates inevitably
leads to more differences between platforms.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 2147483181 + 1024 cannot be represented in type 'int'
Fixes: 61117/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_VMIX_fuzzer-5387692433866752
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The PSNR filter uses the pixel values without considering
the color ranges. This is incorrect. Patch adds a warning
so at least the user knows it.
Let's see an example:
(1) Let's get a simple black pixel/white pixel image.
```
$ echo -n -e "\x00\x00\x00\xff\xff\xff" > /tmp/foo.rgb24
```
(2) From this image, let's distill full and limited range y4m
copies.
```
$ ffmpeg -y -f rawvideo -video_size 2x1 -pix_fmt rgb24 -i /tmp/foo.rgb24 -vf scale="out_range=full" -pix_fmt yuv420p /tmp/foo.full.y4m
$ xxd /tmp/foo.full.y4m
00000000: 5955 5634 4d50 4547 3220 5732 2048 3120 YUV4MPEG2 W2 H1
00000010: 4632 353a 3120 4970 2041 303a 3020 4334 F25:1 Ip A0:0 C4
00000020: 3230 6a70 6567 2058 5953 4353 533d 3432 20jpeg XYSCSS=42
00000030: 304a 5045 4720 5843 4f4c 4f52 5241 4e47 0JPEG XCOLORRANG
00000040: 453d 4655 4c4c 0a46 5241 4d45 0a00 ff80 E=FULL.FRAME....
00000050: 80 .
```
and
```
$ ffmpeg -y -f rawvideo -video_size 2x1 -pix_fmt rgb24 -i /tmp/foo.rgb24 -vf scale="out_range=limited" -pix_fmt yuv420p /tmp/foo.limited.y4m
$ xxd /tmp/foo.limited.y4m
00000000: 5955 5634 4d50 4547 3220 5732 2048 3120 YUV4MPEG2 W2 H1
00000010: 4632 353a 3120 4970 2041 303a 3020 4334 F25:1 Ip A0:0 C4
00000020: 3230 6a70 6567 2058 5953 4353 533d 3432 20jpeg XYSCSS=42
00000030: 304a 5045 4720 5843 4f4c 4f52 5241 4e47 0JPEG XCOLORRANG
00000040: 453d 4c49 4d49 5445 440a 4652 414d 450a E=LIMITED.FRAME.
00000050: 10eb 8080 ....
```
Note that the 2x images are the same (both have 1x pixel at the
darkest black, and one at the brightest white). Only difference
is the range.
(3) Let's calculate the PSNR score:
```
$ ./ffmpeg -filter_threads 1 -filter_complex_threads 1 -i /tmp/foo.full.y4m -i /tmp/foo.limited.y4m -lavfi "psnr" -f null -
...
[Parsed_psnr_0 @ 0x2f5dac0] PSNR y:22.972065 u:inf v:inf average:25.982365 min:25.982365 max:25.982365
```
As we are comparing an image with itself, we expect "y:inf" as the
luma PSNR. Issue here is that the PSNR filter just uses the pixel
values, ignoring the color ranges.
A possible solution would be to have the filter do the conversion.
Proposed solution is to add a warning.
```
$ ./ffmpeg -filter_threads 1 -filter_complex_threads 1 -i /tmp/foo.full.y4m -i /tmp/foo.limited.y4m -lavfi "psnr" -f null -
...
[Parsed_psnr_0 @ 0x2f5dac0] master and reference frames use different color ranges (pc != tv)
...
[Parsed_psnr_0 @ 0x2f5dac0] PSNR y:22.972065 u:inf v:inf average:25.982365 min:25.982365 max:25.982365
```
Tested:
Ran fate.
```
$ make fate -j
...
TEST seek-lavf-ppmpipe
TEST seek-lavf-pgmpipe
TEST seek-lavf-mxf_opatom
```
Fixes: signed integer overflow: 141394472 + 2038060365 cannot be represented in type 'int'
Fixes: 61787/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WAVARC_fuzzer-5882604925878272
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 1871429831 + 343006811 cannot be represented in type 'int'
Fixes: 61784/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AIC_fuzzer-5372151001120768
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
by making gain unsigned we have 1 bit more available
alternatively we can clip twice as in the g729 reference
Fixes: left shift of 23404 by 17 places cannot be represented in type 'int'
Fixes: 61728/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ACELP_KELVIN_fuzzer-6280412547383296
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The comments to the function say that it does not implement the spec and
instead follows VTM.
This patch is quite likely not the right solution and more intended to show
the issue to people knowing the specific part of VTM ...
Fixes: signed integer overflow: 2147483392 + 256 cannot be represented in type 'int'
Fixes: 60505/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-6216675924770816
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Turn tracing into callbacks for each syntax element, with default
callbacks to match current trace_headers behaviour for debug. Move
the construction of bit strings into the trace callback, which
simplifies all of the read and write functions.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
from the specification:
For each OLS, there shall be at least one layer that is an output layer. In other words, for any value of i in the range of 0
to TotalNumOlss − 1, inclusive, the value of NumOutputLayersInOls[ i ] shall be greater than or equal to 1
Fixes: index 257 out of bounds for type 'uint8_t [257]'
Fixes: 61160/clusterfuzz-testcase-minimized-ffmpeg_BSF_VVC_METADATA_fuzzer-6709397181825024
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The AVFrame of a decoder with the ordinary decode callback
is generically unreferenced on error.
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Keeping an ever growing list of CPUs just to pass -march to the compiler and
enable fast_cmov is a waste of time. Every CPU we know has limitations is
already handled here, so just fallback to enabling everything when a passed in
argument is not one of those.
This will enable optimizations for CPU architectures released in the past 7 or
so years with supported GCC and clang compilers when used as argument in
configure, instead of silently ignoring them.
Signed-off-by: James Almer <jamrial@gmail.com>
ISO C++ forbids compound-literals. It's not available with MSVC.
This is a known issue from 10 years ago, and that's why there is a
av_get_time_base_q().
Since we have no plan to remove AV_TIME_BASE_Q, just make it
available in C++.
There are multiple choices:
1. Use C++11 syntax: AVRational{1, AV_TIME_BASE}
Users may still use C++98 to write new code. So no.
2. Use av_get_time_base_q().
It's for this purpose. But it's not compile time constants as
AV_TIME_BASE_Q in C.
So I choose av_make_q() as Anton's suggestion.
https://libav-devel.libav.narkive.com/ZQCWfTun/patch-0-2-fix-avutil-h-usage-from-c
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
It is badly named (should have been -top_field_first, or at least -tff),
underdocumented and underspecified, and (most importantly) entirely
redundant with the setfield filter.
Merge three blocks with slightly inconsistent checks into one, treating
encoder input as interlaced when either:
* at least one of ilme/ildct flags is set
* the first frame in the stream is marked as interlaced
* the user specified the -top option
Stop modifying the frame passed to enc_open().
It was added in cb114ed464 with the comment
"This will allow fixing several bugs with the -shortest option".
Since
* there is no explanation of what these bugs are
* libavformat is not the place to work around ffmpeg CLI bugs
* there is no indication that this feature is actually in use
deprecate it without replacement.
Avoid using the deprecated functions ssh_try_publickey_from_file among
others in favor of symbols introduced in libssh 0.6.0 (Jan 2014) and
update configure to require this version.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Since 432adca5fe no decoder
looks at the slice_count and slice_offset fields at all,
so there is no reason to synchronize them between the worker
and the user thread.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When decoding non-keyframes, the decoding process expects
there to be two reference frames, the last one and the golden
one. The existence of the golden one is checked and in case
it is there, it is presumed that the last one exists as well.
This assumption is wrong in case of memory allocation failure,
namely in case the call to ff_thread_ref_frame() that sets
the last frame fails.
Fix this by actually performing a shuffle without creating
new references. This can't fail and has the advantage of
fewer implicit allocations.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When decoding a keyframe, last_frame and golden_frame are
not used at all and (at least when starting decoding)
are not set at all. But due to code sharing pointer arithmetic
on the NULL data-pointers of these frames has nevertheless
been performed. This is undefined behaviour and causes e.g.
"runtime error: applying non-zero offset 173440 to null pointer"
from UBSan in the vp31, vp4, theora-coeff-level64 and theora-offset
FATE-tests.
Fix this by reusing the current frame for unavailable frames.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The '<' in ///< says that the comment pertains to the previous item
on the same line as the ///<.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The 1000 did result in the appearance of a never ending reload loop
The RFC mandates that "If the client reloads a Playlist file and finds that it has not
changed, then it MUST wait for a period of one-half the target
duration before retrying." and if it has changed
"the client MUST wait for at least the target duration before attempting to reload the
Playlist file again"
Trying to reload 3 times seems a better default than 1000 given these
durations
Issue found by: Сергей Колесников
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The issue is that we cannot rely on any context existing when we free
frames. The Vulkan functions are loaded in each context separately,
so until now, we've just been loading them on every frame's destruction.
Rather than do this, just save the function pointers we need in each
frame. The function pointers are guaranteed to not change and exist.
Since bfb28b5ce8 the permutation
type FF_IDCT_PERM_SIMPLE is ARCH_X86_32-only. So use this
knowledge to disable code for it when not on ARCH_X86_32.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When using multi-threaded decoding, every decoding thread
has its own DBP consisting of H264Pictures and each of these
points to its own AVFrames. They are synced during
update_thread_context via av_frame_ref() and therefore
the threads actually decoding (as well as all the others)
must not modify any field that is copied by av_frame_ref()
after ff_thread_finish_setup().
Yet this is exactly what happens when an error occurs
during decoding and the AVFrame's decode_error_flags are updated.
Given that these errors only become apparent during decoding,
this can't be set before ff_thread_finish_setup() without
defeating the point of frame-threading; in practice,
this meant that the decoder did not set these flags correctly
in case frame-threading was in use. (This means that e.g.
the ffmpeg cli tool fails to output its "corrupt decoded frame"
message in a nondeterministic fashion.)
This commit fixes this by adding a new H264Picture field
that is actually propagated across threads; the field
is an AVBufferRef* whose data is an atomic_int; it is
atomic in order to allow multiple threads to update it
concurrently and not to provide synchronization
between the threads setting the field and the thread
ultimately returning the AVFrame.
This unfortunately has the overhead of one allocation
per H264Picture (both the original one as well as
creating a reference to an existing one), even in case
of no errors. In order to mitigate this, an AVBufferPool
has been used and only if frame-threading is actually
in use. This expense will be removed as soon as
a proper API for refcounted objects (not based upon
AVBuffer) is in place.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a pointer parameter that if supplied will be used to return
the updated decode_error_flags. This will allow to fix several
races when using frame-threading; these resulted from AVFrame
that the earlier code updated concurrently being used as source
in an av_frame_ref() call in the decoder's update_thread_context.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When ov_model_const_input_by_name/ov_model_const_output_by_name
failed, input_port/output_port can be wild pointer.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
All Vulkan HWAccels share the same boilerplate code for creating
session params and this includes a common bug: In case actually
creating the video session parameters fails, the buffer destined
to hold them leaks; in case of HEVC this is also true if
get_data_set_buf() fails.
This commit factors this code out and fixes the leak.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The alignment in vulkan_unmap_from_drm() (formerly the clone
of vulkan_frame_free()) is nicer than the in vulkan_frame_free(),
let's preserve it.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AVBuffer API uses uint8_t as base type for buffers
and therefore its free callbacks need to abide by this.
Therefore vulkan_frame_free() used an inappropriate signature
which caused casts whenever this function has been called
manually.
This commit changes this by making vulkan_frame_free()
use the proper type and a vulkan_frame_free_cb() that
is used as free callback for the AVBuffer API.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: signed integer overflow: -2147483300 - 12285 cannot be represented in type 'int'
Fixes: 59462/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BONK_fuzzer-5714298807386112
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
jpeg2000 overrides the global lowres variable with a lowres field called reduction_factor
ffmpeg -lowres X causes the reduction_factor to be set
ffplay -lowres X causes both lowres and the reduction_factor to be set
ossfuss sets only lowres
only the ffmpeg variant works. This patch tries to make the other 2 work.
Alternative we could just error out if things are inconsistent.
More complex restructuring should be limited to the master branch
to keep this reasonably easy to backport
Fixes: out of array access
Fixes: 59672/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_JPEG2000
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 61991/clusterfuzz-testcase-minimized-ffmpeg_dem_JPEGXL_ANIM_fuzzer-5524679648215040
Fixes: 62181/clusterfuzz-testcase-minimized-ffmpeg_dem_JPEGXL_ANIM_fuzzer-5504964305485824
Fixes: 62214/clusterfuzz-testcase-minimized-ffmpeg_dem_JPEGXL_ANIM_fuzzer-4782972823535616
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
An AVBPrint is initialized via av_bprint_init() (or
av_bprint_init_for_buffer()) which expects uninitialized
AVBPrints; it is therefore not necessary to zero them before
the actual initialization.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is not an error condition, but would be treated like one if the
program terminates on the next transcode loop iteration because of a
signal or keyboard input.
Fixes#10504
Tested-by: https://github.com/0Ky
For badly interleaved files, interleave packets from multiple tracks
at the demuxer level can trigger seeking back and forth, which can be
dramatically slow depending on the protocol. Demuxer level interleave
can be useless sometimes, e.g., reading mp4 via http and then
transcoding/remux to DASH. Disable this option when you don't need the
demuxer level interleave, and want to avoid the IO penalizes.
Co-authored-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Since fb548fba04,
this return -1 is in a function returning enum AVPixelFormat
whose caller checks for AV_PIX_FMT_NONE for failure.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Every code point in the BMP is representable with at most three bytes
in UTF-8 and every code point not in the BMP takes four bytes.
For each of the latter, the encoding of UTF-16 takes as many
bytes; for each of the former, it takes at most 3/2 as many.
Therefore one can decrease the size of the buffer allocated
here.
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Happens when length > INT_MAX / 2; use unsigned for the computation,
but restrict the value to INT_MAX, because avio_get_str16le()
accepts an int as buf_len argument. Notice that it can happen
that the string read by avio_get_str16le() is truncated in this case.
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
get_tag() is not designed with negative length in mind;
in this case, it will allocate a very small buffer
(LEN_PRETTY_GUID + 1) and might call avio_get_str16le()
with a negative maxlen (which relies on these parameters
to be signed).
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Each of the 16 bytes of a GUID is written as a two-character
hex value and three hyphens, leading to a length of 35.
GCC 13 emits a -Wformat-truncation= warning because of this.
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is undefined behaviour even in cases where it works
(it works because it is only a const uint8_t* vs. uint8_t* difference).
Instead add a cbuf parameter to pass a const buffer (for writing)
as well as a parameter indicating whether we are reading or writing;
retry_transfer_wrapper() itself then uses the correct function
based upon this information.
Reviewed-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_image_copy() accepts const uint8_t* const * as source;
lots of user have uint8_t* const * and therefore either
cast (the majority) or copy the array of pointers.
This commit changes this by adding a static inline wrapper
for av_image_copy() that casts between the two types
so that we do not need to add casts everywhere else.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also constify AVAudioFifo* in the peek functions
besides constifying intermediate pointers (void**->void * const *).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Broken in e8704a8f60
when ffurl_read() has been turned into a static inline function
different from the actually used function ffurl_read2().
Fixes ticket #10562.
Tested-by: Mitzsch01
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
mxf_match_uid() accepts two const UID and a len parameter.
UID is a typedef for an array of 16 uint8_t, so the const UID
parameter is actually a pointer to const uint8_t.
The point of mxf_match_uid() is to check whether the initial
part of two UIDs match; the length of said part is given
by the len parameter. Once an incomplete UID has been passed
to mxf_match_uid() (albeit with the correct len, so safe),
which makes GCC emit -Wstringop-overread warnings.
Fix this by using a const uint8_t[] as type; it is more
natural for incomplete UIDs.
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Therefore use a proper prefix for this API, e.g.
ff_init_vlc_sparse -> ff_vlc_init_sparse
ff_free_vlc -> ff_vlc_free
INIT_VLC_LE -> VLC_INIT_LE
INIT_VLC_USE_NEW_STATIC -> VLC_INIT_USE_STATIC
(The ancient INIT_VLC_USE_STATIC has been removed
in 595324e143, so that
the NEW has been dropped.)
Finally, reorder the flags and change their values
accordingly.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Mostly taken from the documentation for ff_init_vlc_from_lengths();
also remove the documentation in vlc.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Not every user of idctdsp.h wants to initialize an IDCTDSPContext;
e.g. the proresdsp only uses ff_init_scantable_permutation()
and the IDCT permutation enum; similarly for cavsdsp and wmv2dsp.
Using a forward declaration here avoids an avcodec.h dependency
in the relevant files.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Due to non-byte-alignment a read of 32 bits guarantees only
25 usable bits; therefore get_bits_long() (which is used to
potentially read more than 25 bits) performs two reads in case
it needs to read more than 25 bits and combines the result.
Yet this is not necessary: One can just read 64 bits at a time
to get 32 usable bits (57 would be possible). This commit does so.
This reduced the size of .text by 30144B for GCC 11.4 and 5648B
for Clang 14 (both with -O3).
(get_bits_long() is a building block of show_bits_long()
and get_ue_golomb_long(), so this patch affects these, too.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are currently non-const for reasons unknown, although
avio_write() accepts a const buffer.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is undefined behaviour even in cases where it works
(it works because both are pointers). Instead change
the functions involved to use the type expected by the AVIO-API
and add inline wrappers for our internal callers.
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only included because two very rarely used functions
use pointers to URLContexts; use struct URLContext instead.
Also move ffio_geturlcontext() so that one can avoid
a forward declaration of struct URLContext (which would be
necessary as soon as FF_API_AVIODIRCONTEXT is no more).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Incompatibility of the flags and the protocol's capabilities
are checked generically (see url_alloc_for_protocol()).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
A switch is simpler than a lookup over a table with
three entries, only two of which can happen at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: fc429d785e
cpb_cnt used to be initialized to 1 before
fc429d785e so cpb_cnt_minus1 should be
initialized to 0.
Also add +1 to the decode_sublayer_hrd call to account for the change to
the offset
And remove the AVOID_PROBING flag, given it's the last av1 decoder to be tested
either way.
This fixes a regression introduced in 1652f2492f,
where even if forcing the native av1 decoder, if another decoder was present,
like libdav1d or libaom-av1, they'd be used for probing and some fate tests
would have different results.
Signed-off-by: James Almer <jamrial@gmail.com>
There is likely a better way to fix this, this is mainly to show the problem
Fixes: MC within same frame resulting in overlapping memcpy()
Fixes: 60189/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-4992746590175232
Fixes: 61753/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-5022150806077440
Fixes: 58062/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-4717458841010176
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These casts cast const away temporarily; they are safe, because
the pointers that are initialized point to const data. But this
is nevertheless not nice and leads to warnings when using
-Wcast-qual. blend_modes.c generates 546 (2*39*7) such warnings
which is the majority of such warnings for FFmpeg as a whole.
vf_blend.c and vf_blend_init.h also use this pattern;
they have also been changed.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
lzma_stream.next_in is const for more than 15 years now
and has been so in every release of liblzma.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is not necessary at all. So remove it.
This also breaks an inclusion cycle mem.h->avutil.h->common.h->mem.h.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, avutil.h includes common.h which includes mem.h which
includes avutil.h, so that all these headers are in fact equivalent.
Yet mem.h does not need to include avutil.h at all and when it no longer
does, including common.h will no longer include error.h (included by
avutil.h) as well; change this by moving error.h to avutil.h, as error.h
is clearly a commonly used header.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most users of ffio_init_context() simply want to wrap
a buffer into an AVIOContext; they do not provide
function pointers at all.
Therefore this commit adds shortcuts for these two common
operations. This also allows to accept const data when reading
(i.e. the const is now cast away at a central place in
ffio_init_read_context() instead of at several callers).
This also allows to constify the data in ff_text_init_buf().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These defines are also used in other contexts than just AVCodecContext
ones, e.g. in libavformat. Furthermore, given that these defines are
public, the AV-prefix is the right one, so deprecate (and not just move)
the FF-macros.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVCodec is only ever used as an incomplete type (i.e. via a pointer
to an AVCodec) in avformat.h and it is not really part of the core
of avformat.h or libavformat; almost none of our internal users
make use of it (and none make use of hwcontext.h, which is implicitly
included). So switch to use struct AVCodec, but continue to include
codec.h for external users for compatibility.
Also, do the same for AVFrame and frame.h, which is implicitly included
by codec.h (via lavu/hwcontext.h).
Also, remove an unnecessary inclusion of <time.h>.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
and also perform the remainder of the subtitle parsing directly
after mkv_parse_subtitle_codec().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Namely to a place after the AVStream has already been created,
so that it can be directly attached to it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
More exactly, factor codec-specific video parsing out of
matroska_parse_tracks(). This is intended to improve readability.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If the size of the data of an EbmlBin is > 0, its data is always
present, as ebml_read_binary() always leaves the buffer
in a consistent state (even on error).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
More exactly, factor codec-specific audio parsing out of
matroska_parse_tracks(). This is intended to improve readability.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, matroska_parse_tracks() has two main ways
to set AVCodecParameters.extradata: A generic way via CodecPrivate
(possibly with an offset) and by allocating a buffer manually;
the pointer to this buffer is stored in a stack pointer.
In particular, the latter method is problematic, as the buffer
needs to be freed manually in case of error (currently there
are no error conditions between the place where it is set
to AVCodecParameters.extradata).
Most of these buffers are very small (<= 22B), so replace
the pointer to an allocated buffer with a stack buffer
and set the extradata directly for the one place where
the buffer may not be small.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Once upon a time, 413abbe164
added versions of some put_no_rnd_pixels functions for use
in VP3 and Theora (with an explicit check so that they are
only used for VP3 and Theora). When this was moved to hpeldsp
(from dsputil) in 3ced55d51c,
the check was replaced by a check for the bitexact flag
(and a CONFIG_VP3_DECODER compile-time check), so that
these functions were now used for other codecs as well.
Later commit 1dfc3cf89d
split off the "VP3-specific bits into a separate file",
yet these bits were not really VP3-specific bits at all
any more. (The error was repeated in commit
0a39c9ac0bfd7345fe676b4e2707d9cec3cbb553.) This commit
has not been reverted, because this would make future
changes from Libav (from where it originated) harder,
yet Libav is no more, so this commit effectively reverts
1dfc3cf89d.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Makes the output of the native decoder consistent with external decoders like
libdav1d with fate-enhanced-flv-av1.
Reviewed-by: Zhao Zhili <quinkblack@foxmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit eb88ccb92e.
AVCodecContext fields are the proper place for a decoder to export such values.
This change is in preparation for the following commits.
add option named rtmp_enhanced_codec,
it would support hvc1,av01,vp09 now,
the fourcc is using Array of strings.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fixes: signed integer overflow: -2147483648 + -1048576 cannot be represented in type 'int'
Fixes: 59365/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEG4_fuzzer-642654923954585
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 2079654542 - -139267653 cannot be represented in type 'int'
Fixes: 60811/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TTA_fuzzer-5915858409750528
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes the test when the non-bitexact MMXEXT versions of
the hpeldsp functions are used.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In order to send VP9 tracks with FLV or RTMP, the enhanced RTMP
specification tells that VPCodecConfigurationRecord, a.k.a. vpcC
ISO-BMFF box, must be inserted into a metadata message. However, the
function responsible for generating vpcCs currently returns invalid
boxes, that are lacking the Version and Flag fields, inherited from
FullBox. For some reason, both flags were being added manually in
movenc. This patch fixes the issue.
Signed-off-by: Alessandro Ros <aler9.dev@gmail.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This makes the test stricter because it is checked that the
MMX registers are not accidentally clobbered.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only sub_media_pred has an MMXEXT version, so one can use
the version with the stricter check (that checks that
the MMX registers have not been clobbered) for sub_left_predict.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only the idct_dc and add_residual functions have MMX versions,
so one can use the version with the stricter check (that checks
that the MMX registers have not been clobbered) for all the other
checks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is not even clear what these emms_c() are supposed to achieve:
create_filtergraph() (where it may be called) does not call
ASM functions itself; it merely sets some function pointers.
Furthermore, there are no colorspacedsp functions using MMX
(checked by checkasm which does not use declare_new_emms()).
Finally, checking whether to issue emms_c() is overblown anyway.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
winbase.h defines IGNORE and is included via bzlib.h when compiling
for Windows. So rename this macro to NOTHING.
Also rename the muxer macro for consistency.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It includes various Windows-specific headers when compiling
for Windows and these sometimes cause issues: E.g. winbase.h
defines IGNORE, which clashes with a macro used in the Matroska
muxer (since 884653ee5b) and demuxer.
This header provides fallback defines for various stuff that is
mostly not used directly by (de)muxers at all:
mkdir, rename, rmdir, unlink, access, poll, pollfd, nfds_t,
closesocket, socklen_t, fstat, stat, lseek, SHUT_(RD|WR|RDWR)
and various POLL* constants.
Ergo fix this issue by not auto-including this header in lots
of places via an inclusion in internal.h and instead include
it everywhere where the above stuff is used (most of these
translation units already included os_support.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is the very last user of any lavc transform code.
This also *corrects* wmavoice decoding, as the previous DCT/DST
transforms were incorrect, bringing it closer to Microsoft's
own wmavoice decoder.
These are in-place transforms, required for DCT-I and DST-I.
Templated as the mod2 variant requires minor modifications, and is
required specifically for DCT-I/DST-I.
The word "monotonous" means "spoken in a monotone" which is not what we
mean here. We mean "monotonic" i.e. nondecreasing.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Adds a fate test for the jpegxl_anim demuxer, that should allow testing
for true positives and false positives for animated jpegxl files. Note
that two of the test cases are not animated, in order to help sort out
false positives.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
This simplification reduces codesize.
(It even reduces the size of .rodata here, because
the jump table used by the compiler is bigger than
the actual array.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When muxing, the AVStreams' side-data is typically set
by the caller before avformat_write_header();
it is not documented to be else. Yet the Matroska muxer
added an AVStereo3D side data if certain metadata
was present:
Since commit 4d686fb721
(adding support for AVStereo3D stream side-data),
the Matroska muxer checked certain stream tags that
contain Matroska's StereoMode and (if they are present)
converted this value into an AVStereo3D struct that
gets attached to the AVStream (reusing a function from
the demuxer). Afterwards the AVStereo3D side data struct
(whether it has just been added by the muxer or not) gets
parsed and converted back into a Matroska StereoMode.
Besides being an API violation this change broke
StereoMode values without a corresponding AVStereo3D
(namely the anaglyph ones).
This commit fixes this: A StereoMode given via tags
is now used-as-is; if no such tag exists and an AVStereo3D
side data exists, it is converted into the corresponding
StereoMode (if possible). This approach also fixes
handling of the anaglyph ones; the changes to the
matroska-stereo_mode are due to this.
The new STEREOMODE_STEREO3D_MAPPING has been put to
good use for this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It will allow to create tables for easy conversion from AVStereo3D
to stereomode and back again as well as derive the properties
of a given stereomode.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has undefined behaviour in case the value does not fit into an int.
Also stop allowing to override a stream level "alpha_mode" tag
by an AVFormatContext one and properly check that the stereo_mode
number given via a tag is actually in the range 0..14: Negative
values would have been treated as zero before this patch.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When no output video framerate is specified by the user with -r or can
be inferred from the filtergraph, encoder setup will arbitrarily decide
that the framerate is 25fps. However, making up any framerate value for
VFR encoding is at best unnecessary.
Changes the results of the sub2video tests, where the input timebase is
now used instead of 1/25.
Mainly this fixes handling special values of -enc_time_base ('demux' or
'filter') for audio. It also prints a warning if -enc_time_base is
specified for subtitles, instead of ignoring it silently (current
subtitle encoding API only works with AV_TIME_BASE_Q).
This function converts packet timestamps from the input stream timebase
to OutputStream.mux_timebase, which may or may not be equal to the
actual output AVStream timebase (and even when it is, this may not
always be the optimal choice due to bitstream filtering).
Just keep the timestamps in input stream timebase, they will be rescaled
as needed before bitstream filtering and/or sending the packet to the
muxer.
Move the av_rescale_delta() call for audio (needed to preserve accuracy
with coarse demuxer timebases) to write_packet.
Drop now-unused OutputStream.mux_timebase.
Bitstream filtering input timebase is not always necessarily equal to
OutputStream.mux_timebase. Also, set AVPacket.time_base correctly for
packets output by bitstream filters
Do not rescale at all in of_output_packet() when not doing bitstream
filtering, as it's unnecessary - write_packet() will rescale to the
actual muxer timebase.
When the marker writing code was merged from libav to FFmpeg
in dc62016c, it failed to take into account that the meaning of
cluster_pos had changed in bda5b662; in particular, the special
value for “I'm not currently working on a cluster” had changed
from 0 to -1. This makes the avio_write_marker() call never
be called. Update the if statement to fix it.
Fixes: Ticket9843
Signed-off-by: Steinar H. Gunderson <steinar+ffmpeg@gunderson.no>
Signed-off-by: Martin Storsjö <martin@martin.st>
The loader ensures only that functions with tagged supported extensions
exist, rather than ensuring only those with supported extensions are
loaded.
As the init function uses Vulkan functions, whose loading requires them
to have the extension flags set, the extension flags are guaranteed
to also exist at this point.
Can be used to configure libplacebo's underlying raw options, which
sometimes includes new or advanced / in-depth settings not (yet) exposed
by vf_libplacebo.
This new upstream struct simplifies params struct management by allowing
them to all be contained in a single dynamically allocated struct. This
commit switches to the new API in a backwards-compatible way.
The only nontrivial change that was required was to handle
`sigmoid_params` in a way consistent with the rest of the params
structs, instead of setting it directly to the upstream default.
This prevents code duplication in the source form by calling the parse
code that was moved to avcodec last commit. The code will be duplicated
in binary form for shared builds (it's not that large), but for source
code it will only exist in one location now.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Add a full parser to libavcodec for AV_CODEC_ID_JPEGXL. It finds the
end of the stream in order to packetize the codec, and it looks at
the headers to set preliminary information like dimensions and pixel
format.
Note that much of this code is duplicated from avformat/jpegxl_probe.c,
but that code will be removed and call this instead in the next commit.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Before this commit, the decoder erroneously assumes that the AVFrame
passed to the receive_frame is the same one each time. Now it keeps an
internal AVFrame to write into, and copies it over when it's done.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Fixes an error that's caused by decoding a grayscale JXL image after an
RGB image is decoded, with the same decoder instance.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
OpenVINO API 2.0 was released in March 2022, which introduced new
features.
This commit implements current OpenVINO features with new 2.0 APIs. And
will add other features in API 2.0.
Please add installation path, which include openvino.pc, to
PKG_CONFIG_PATH mannually for new OpenVINO libs config.
Signed-off-by: Ting Fu <ting.fu@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
check_func() might return NULL, in which case the function is not to be
benched. Introduced in cc679054c7.
Signed-off-by: Matthias Dressel <code@deadcode.eu>
Signed-off-by: Martin Storsjö <martin@martin.st>
So far, AV_READ_TIME would return the cycle counter. This posed two
problems:
1) On recent systems, it would just raise an illegal instruction
exception. Indeed RDCYCLE is blocked in user space to ward off some
side channel attacks. In particular, this would cause the random
number generator to crash.
2) It does not match the x86 behaviour and the apparent original intent
of AV_READ_TIME in the functional code base (outside test cases).
So this replaces the cycle counter with the time counter. The unit is
a platform-dependent constant fraction of time, and the value should be
stable across harts (RISC-V lingo for physical CPU thread).
It is currently probably not possible for it to be negative as
the needed 2Mb input buf size is not achievable. But it is more
robust to check for it too.
If it would become negative than code like
s->samples[0][n] = s->samples[0][s->nb_samples + n];
would crash
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -1403461578 + -843974775 cannot be represented in type 'int'
Fixes: 60868/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEG1VIDEO_fuzzer-4599793035378688
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The fate-run.sh shell script exports LC_ALL=C before invoking the
test executables; this is probably done for consistency.
When executing Windows binaries with Wine, it normally handles
UTF-8 command line parameters just fine - but with LC_ALL set to
C, it treats them as plain ASCII.
As the unicode command line parameters wasn't the main thing
being tested here, just convert them to plain ASCII, for
portability. This fixes the test for all test configurations that
use Wine.
Signed-off-by: Martin Storsjö <martin@martin.st>
ddc1cd5cdd defined WIN32_LEAN_AND_MEAN
globally, which makes for much fewer transitive includes from
windows.h. With that define, CoTaskMemFree no longer gets
implicitly declared by just including windows.h, but one has to
include the right header objbase.h too.
That commit caused ole32 to no longer get detected, which caused
dxva2 to no longer be enabled. This gets fixed by this patch.
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit fixes bug #10495
The code had several bugs related to post-loop compensation code:
- test assembly instruction performs bitwise AND operation and
generate flags used by jz branch instruction. Wrong test condition
leads to incorrect branching
- Incorrect compensation code for some branches
Signed-off-by: Evgeny Pavlov <lucenticus@gmail.com>
This abstraction is similar to the existing one for pthread_mutex_t and
pthread_once_t functions, and should reduce the amount of ifdeffery used
in future code.
Signed-off-by: James Almer <jamrial@gmail.com>
C++ doesn't support designated initializers until C++20. We have
a bunch of pre-defined channel layouts, the gains to make them
usable in C++ exceed the losses.
Bump minor version so C++ project can check before use these defines.
Also initialize .opaque field explicitly to reduce warning in C++.
Signed-off-by: James Almer <jamrial@gmail.com>
if !ph_deblocking_params_present_flag is true, ph_deblocking_filter_disabled_flag infered from pps
if !sh_deblocking_params_present_flag is true, sh_deblocking_filter_disabled_flag infered from ph
Failed clips:
ENT444MAINTIER_C_Sony_3.bit
ENT444HIGHTIER_D_Sony_3.bit
Signed-off-by: James Almer <jamrial@gmail.com>
if pps_alf_info_in_ph_flag is true
sh_alf_enabled_flag infered from ph
Failed clip:
LTRP_A_ERICSSON_3.bit
Signed-off-by: James Almer <jamrial@gmail.com>
if sh_picture_header_in_slice_header_flag is true
sh_lmcs_used_flag and sh_explicit_scaling_list_used_flag are infered from ph
Failed clips:
LMCS: CLM_A_KDDI_2.bit STILL444_A_KDDI_1.bit
Scaling: SCALING_B_InterDigital_1.bit SCALING_A_InterDigital_1.bit
Signed-off-by: James Almer <jamrial@gmail.com>
By default the OpenEXR decoder outputs linear light pixel data by
applying a gamma=1.0 transfer (i.e. a no-op). When it does so, it
should tag the data as linear so color-managed filters or other tools
can work with it correctly.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
If user doesn't set framerate when he creates a filter, the filter uses
default framerate {0, 1}. This causes error when setting timebase to
1/framerate. Now change it to pass inlink->time_base to outlink when
framerate is not set.
This patch fixes ticket: #10476#10468
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Including winsock2.h or windows.h without WIN32_LEAN_AND_MEAN cause
bzlib.h to parse as nonsense, due to an instance of #define char small
in rpcndr.h.
See:
https://stackoverflow.com/a/27794577
Signed-off-by: L. E. Segovia <amy@amyspark.me>
Signed-off-by: Martin Storsjö <martin@martin.st>
because the flv specification said the video frametype
should use value range from 0x00 to 0x70,
so use 0xF0 have no problem before support enhanced flv,
but the 0xF0 will get incorrect result after support enhanced flv,
so should set the video frametype mask 0x70 to make it correct now.
Reported-By: flvAnalyser <hybase@qq.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Writing the duration SimpleTag is special: It's size is
reserved in advance via an EBML Void element (if seekable)
and this reserved space is overwritten when writing the trailer;
it does not use put_ebml_string().
The string to write is created via snprintf on a buffer
of size 20; this buffer is then written via put_ebml_binary()
with a size of 20.
EBML strings need not be zero-terminated; if not, they
are implicitly terminated by the element's length field.
snprintf() always zero-terminates the buffer, i.e.
the last byte can be discarded when using an EBML string.
This patch does this.
The FATE changes are as expected: One byte saved for every
track; the only exception is the matroska-qt-mode test:
An additional byte is saved because an additional byte
could be saved from the enclosing Tags length field.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do it only for video (the only thing for type for which HDR10+
makes sense).
This effectively reverts changes to several FATE ref-files
made in bda44f0f39.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Pass it as void* instead. While just at it, also constify
the pointee of AVDOVIDecoderConfigurationRecord* in
ff_isom_put_dvcc_dvvc().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These two AVIOContexts currently coincide, but this is not
guaranteed to remain so (in fact, I have plans to write each
TrackEntry into its own AVIOContext).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only WebVTT which is special in WebM; hypothetical future
subtitle codecs in WebM will presumably use the ordinary code.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Specifically, test copying a channel layout with custom order,
so that the allocation codepath of av_channel_layout_copy()
is executed.
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_channel_name(), av_channel_description() and
av_channel_layout_describe() are supposed to return the size
of the needed buffer to allow the user to check for truncation;
the documentation ("If the returned value is bigger than buf_size,
then the string was truncated.") confirms that size does not
mean strlen.
Yet the AVBPrint API, i.e. AVBPrint.len, does not account for
the terminating '\0'. Therefore the returned length is off by one.
Furthermore, also check for whether the returned value actually
fits in an int (which is the return value of these functions).
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AVBPrint API guarantees that the string buffer is always
zero-terminated; in order to honour this guarantee, there
obviously must be a string buffer at all and it must have
a size >= 1. Therefore av_bprint_init_for_buffer() treats
passing a NULL buffer or size == 0 as invalid data that
leads to undefined behaviour, namely NPD in case NULL is provided
or a write to a buffer of size 0 in case size == 0.
But it would be easy to support this, namely by using the internal
buffer with AV_BPRINT_SIZE_COUNT_ONLY in case size == 0.
There is a reason to allow this: Several functions like
av_channel_(description|name) are actually wrappers
around corresponding AVBPrint functions. They accept user
provided buffers and are supposed to return the required
size of the buffer, which would allow the user to call
it once to get the required buffer size and call it once
more after having allocated the buffer.
If av_bprint_init_for_buffer() treats size == 0 as invalid,
all these users would need to check for this themselves
and basically add the same codeblock that this patch
adds to av_bprint_init_for_buffer().
This change is in line with e.g. snprintf() which also allows
the pointer to be NULL in case size is zero.
This fixes Coverity issues #1503074, #1503076 and #1503082;
all of these issues are about providing NULL to the channel-layout
functions that are wrappers around AVBPrint versions.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The demuxer uses a extradata offset of 26, so we would need
to recreate the missing 26 bytes somehow in the muxer, but
we just don't. Remuxed files (like real/rv30.rm from the FATE-suite)
don't work due to missing extradata.
(The extradata offset also applies to RV40 and the extradata
is indeed lost upon remuxing, yet remuxing real/spygames-2MB.rmvb
works; our RV40 decoder does not use extradata at all.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
RV10 and RV20 are unsupported because creating the correct CodecPrivate
is unsupported (the demuxer uses a codecpriv_offset of 26, so one
would need to recreate the missing 26 bytes); COOK and SIPR are
unsupported, because Matroska uses a packetization mode that is
different from what FFmpeg uses in its packets (see
matroska_parse_rm_audio() in the demuxer).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Provides coverage for the code transforming the ALAC extradata.
Also set creation_time metadata to test this, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
bda44f0f39 added code that
potentially added another BlockMore master and BlockAdditional
data as well as BlockAddID number, yet it bumped the number
of EBML elements by four instead of only three.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska supports orthogonal transformations (both pure rotations
as well as reflections) via its 3D-projection elements, namely
ProjectionPoseYaw (for a horizontal reflection) as well as
ProjectionPoseRoll (for rotations). This commit adds support
for this.
Support for this in the demuxer has been added in
937bb6bbc1 and
the sample used in the matroska-dovi-write-config8 FATE-test
includes a displaymatrix indicating a rotation which is now
properly written and read, thereby providing coverage for
the relevant code in the muxer as well as the demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Note: There is a slight difference in the handling of
the max_file_size option: The earlier code used it to mean
to limit the size of the buffer to allocate; the new code
treats it more literally as maximum size to read from
the input.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is a bit cleaner as int need not be the underlying type
of an enum if a smaller type can hold all its values.
Also declare the children_ids array as const as it never changes.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also rename the contexts and the functions so their names will reflect their
intended size.
With the earlier patch this fixes the audio corruption regression caused by
6ba0aa1770.
Fixes ticket #10029.
Signed-off-by: Marton Balint <cus@passwd.hu>
Improves the audio corruption regression caused by
6ba0aa1770 reported in ticket #10029.
There is still however a noticable audio glitch, so the FFT conversion to AVTX
probably also needs some modifications.
Signed-off-by: Marton Balint <cus@passwd.hu>
This patch changes the return instruction in the tr_32x4 macro from
BR to RET.
Function returns should always use the RET instruction instead of BR,
to avoid interfering with branch prediction.
On devices that support BTI, this is observeable as a landing pad is
required when branching with BR. The change fixes
fate-hevc-hdr-vivid-metadata when on hardware with BTI support.
Signed-off-by: Casey Smalley <casey.smalley@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit is the AVHWAccel analogue of commit
20f9727018: It moves the private fields
of AVHWAccel to a new struct FFHWAccel extending AVHWAccel
in an internal header (namely hwaccel_internal.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All usages of ff_hwaccel_frame_priv_alloc() have the same pattern:
Check for whether a hwaccel is in use; check whether it needs
private frame-specific data; allocate the AVBuffer and set
it.
This commit modifies ff_hwaccel_frame_priv_alloc() to perform
this task on its own.
(It also seems that the H.264 decoder did not perform proper
cleanup in case the buffer could not be allocated. This has been
changed.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
libavcodec/hwconfig.h currently contains HWACCEL_CAP_* flags
as well as the definition of AVCodecHWConfigInternal and some
macros to create them.
The users of these two are nearly disjoint: The flags are used
by files providing AVHWAccels whereas AVCodecHWConfigInternal
is used by files providing codecs (for FFCodec.hw_configs).
This patch therefore moves these flags to a new file hwaccel_internal.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
A filter needs formats.h iff it uses FILTER_QUERY_FUNC();
since lots of filters have been switched to use something
else than FILTER_QUERY_FUNC, they don't need it any more,
but removing this header has been forgotten.
This commit does this; files with formats.h inclusion went down
from 304 to 139 here (it were 449 before the preceding commit).
While just at it, also improve the other headers a bit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
internal.h doesn't rely on it; instead include it directly
in every user that needs it (a filter needing it is basically
equivalent to it using FILTER_QUERY_FUNC, i.e. a majority of
filters doesn't need it).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This file is only used by the greyedge filter and therefore
only compiled if said filter is enabled. This also allows
to remove a config_components.h inclusion, avoiding unnecessary
rebuilds.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Lots of video filters use a very simple input or output:
An array with a single AVFilterPad whose name is "default"
and whose type is AVMEDIA_TYPE_VIDEO; everything else is unset.
Given that we never use pointer equality for inputs or outputs*,
we can simply use a single AVFilterPad instead of dozens; this
even saves .data.rel.ro (8312B here) as well as relocations.
*: In fact, several filters (like the filters in vf_lut.c)
already use the same outputs; furthermore, ff_filter_alloc()
duplicates the input and output pads so that we do not even
work with the pads directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
internal.h does not depend on video.h (and should not depend on it)
and therefore should not include video.h at all; instead all users
of video.h should include it directly.
Doing so also avoids unnecessary video.h inclusions in files that
don't need it, like most audio filters.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Lots of audio filters use very simple inputs or outputs:
An array with a single AVFilterPad whose name is "default"
and whose type is AVMEDIA_TYPE_AUDIO; everything else is unset.
Given that we never use pointer equality for inputs or outputs*,
we can simply use a single AVFilterPad instead of dozens; this
even saves .data.rel.ro (4784B here) as well as relocations.
*: In fact, several filters (like the filters in af_biquads.c)
already use the same inputs; furthermore, ff_filter_alloc()
duplicates the input and output pads so that we do not even
work with the pads directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
h264_sei.h is no longer used since the SEIs were moved to sei.h;
this also avoids inclusions of avcodec.h and bytestream.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Don't include them implicitly via avcodec.h. This avoids
indirect avcodec.h inclusions in lavc/dirac.c, lavf/oggparsedirac.c,
and lavf/rtp(dec|enc)_vc2hq.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids including lavc/codec_desc.h everywhere and thereby
forces users to include it directly instead of lazily and potentially
unknowingly relying on indirect inclusions.
Also add the proper inclusion to libavformat/demux.c, one of the
two files that actually use the new field.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most of the inline functions in h264dec.h are only used
by h264_cavlc.c and h264_cabac.c. Therefore move them
to the common header for these two, namely h264_mvpred.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This would only be necessary if this header declared a function
that takes a (pointer to) struct AVCodecContext as parameter.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In WinRT mode, we use CreateThread instead of _beginthreadex.
CreateThread takes a LPTHREAD_START_ROUTINE function pointer,
which has got the signature DWORD WINAPI ThreadProc(LPVOID).
_beginthreadex takes a function with the signature
unsigned __stdcall func(void *).
DWORD is defined as an unsigned long, which is different type
from unsigned int, even if they have the same size on Windows.
This fixes build failures with Clang 16 and newer, where function
pointer type mismatches are a fatal error by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes the test when running in a cross test setup where the
samples are located at a different path between build host and
temote test target.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the GCC specific codepath for Clang in MSVC mode too.
This matches the condition used in a number of other places.
MSVC doesn't have a way to signal potential aliasing, while GCC
(and Clang) can use __attribute__((may_alias)) for this purpose.
When building with Clang in MSVC mode, __GNUC__ isn't defined but
_MSC_VER is as Clang primarily impersonates MSVC - but even then it
does support the GCC style attributes.
The GCC specific codepath uses av_alias, which expands to
the may_alias attribute if supported. The MSVC specific codepath
doesn't use av_alias so far (as MSVC doesn't support any
corresponding attribute).
This fixes a couple HEVC decoder tests when built with Clang 14 or
newer in MSVC mode (with issues observed on all of x86_64, armv7
and aarch64).
Signed-off-by: Martin Storsjö <martin@martin.st>
Having a decode_slice callback is mandatory for HWAccels;
the only exception to this (and the reason why these checks
were added) was XvMC, but it is no more since commit
be95df12bb.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise the var_names and the corresponding enum will be off
and e.g. the array holding the variable values will be too small.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
User may set color range / matrix coefficient set / primaries / transfer
characteristics for output.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Use the bytestream2-API instead.
Should also fix Coverity issue #1473536 (which is about an unchecked
init_get_bits8()).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
nvenc_store_frame_data() is always called with frame != NULL
(checked at the beginning of nvenc_send_frame());
in fact, frame is dereferenced unconditionally after the block
guarded by the check for frame. Therefore Coverity complains
about this in issue #1538295.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The code currently presumes that a return value of AVERROR(ENOMEM)
implies that ac3hdr could not be allocated, so it need not be freed.
Yet any avpriv_ac3_parse_header() might allocate more than the
AC3HeaderInfo internally (it doesn't currently), so simply free
it unconditionally.
Fixes Coverity issues #1492870 and #1492868.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The discrepancy between the actual definition and the declarations
in hwaccels.h is actually UB.
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We've been fuzzing torchvision with [sydr-fuzz](https://github.com/ispras/oss-sydr-fuzz)
and found out of bounds error in ffmpeg project at audioconvert.c:151.
To prevent error we need to fix checks for in and out fmt in swr_init.
Signed-off-by: Eli Kobrin <kobrineli@ispras.ru>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
libavutil/hwcontext_qsv.c: In function ‘qsv_map_to’:
libavutil/hwcontext_qsv.c:1905:47: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
These functions allow not only to read and write unsigned values,
but also to check ranges and to emit trace output which can be
beautified when processing arrays (indices like "[i]" are replaced
by their actual numbers).
Yet lots of callers actually only need something simpler:
Their range is only implicitly restricted by the amount
of bits used and they are not part of arrays, hence don't
need this beautification.
This commit adds specializations for these callers;
this is very beneficial size-wise (it reduced the size
of .text by 23312 bytes here), as a call is now cheaper.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The H.264 decoder, the only codec with which this code
is ever called, does not set AVCodec.pix_fmts.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Change some internal APIs a bit to make it harder to make
such mistakes.
In particular, have the read chunk functions return an error
when the result is incomplete.
This might be less flexible, but since there has been no
use-case for that so far, avoiding coding mistakes seems better.
Add a function to queue a AVBPrint directly (ff_subtitles_queue_insert_bprint).
Also fixes a leak in lrcdec when ff_subtitles_queue_insert fails.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
ret can be given an argument instead.
This is also consistent with how other assembler code
in FFmpeg does it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Pointers to these functions are used in comparisons.
Currently the compiler has to presume the worst for these,
namely that the functions are from another DSO and therefore
loads their addresses from the GOT (which also entails a
relocation entry that is processed at runtime, regardless
of whether the code using them is run or not). This changes
after these functions are declared as hidden.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is the more proper place for them given that this is
the only API using them.
Also use a forward-declaration of AVCodecContext in fdctdsp.h
to avoid including avcodec.h in jfdct(fst|int).c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
libavcodec/vulkan_video_codec_av1std.h currently does not pass
checkheaders: It is missing stdint.h and vulkan/vulkan_core.h.
The comment "This header is NOT YET generated from the Khronos Vulkan
XML API Registry." as well as the fact that it does not use our standard
inclusion guards makes the file appear as if it is to be treated
like a third-party header and not one of our own. This commit
therefore "fixes" the issue by unconditionally skipping said header.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The contents are full TTML XML documents. TTML writing tests'
results are updated as the streams are now properly identified
as TTML ones.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
The commits eac4324bfb and
cd8211527e renamed the examples, but the
targets were not updated. Hence, the builds are missing -lm.
Signed-off-by: Sebastian Ramacher <sramacher@debian.org>
Signed-off-by: James Almer <jamrial@gmail.com>
The hevc parser parses the diagonal scan order in bitstream into raster
scan order. However, the Vulkan spec wants it as specified in H265 spec,
which is diagonal scan order.
Tested on RADV.
v2: fix copy-paste typo with PPS.
A POLLERR occurs when libavcodec attempts to dequeue output buffers
before enqueuing capture buffers. This could happen to an application
deciding to send the first coded packet. Suppress these POLLERRs when
the buffers are uninitialized and avoid crashing because of enumerating
uninitialized buffers.
See https://trac.ffmpeg.org/ticket/9957 for the original bug report.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This allows this common H.274 SEI to be parsed from both H.264
as well as HEVC, as well as probably from VVC in the future.
Generally attempts to keep the original code as similar as possible.
FATE test refererence changes only change the order of side data
export within a single frame. Nothing else seems to have changed.
This allows this common H.274 SEI to be parsed from both H.264
as well as HEVC, as well as probably from VVC in the future.
Generally attempts to keep the original code as similar as possible.
FATE test refererence changes only change the order of side data
export within a single frame. Nothing else seems to have changed.
The unchecked read caused the 2nd subsequent tell call to move backward resulting
in a negative length
Fixes: assertion failure
Fixes: 60276/clusterfuzz-testcase-minimized-ffmpeg_BSF_TRACE_HEADERS_fuzzer-5434126636023808
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: vmixdec.c:132:34: runtime error: signed integer overflow: -2147483648 * 1856 cannot be represented in type 'int'
Fixes: vmixdec.c:119:20: runtime error: signed integer overflow: -1256 + -2147483648 cannot be represented in type 'int'
Fixes: vmixdec.c:137:36: runtime error: signed integer overflow: 2147483416 * 16 cannot be represented in type 'int'
Fixes: 59843/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_VMIX_fuzzer-4857434624360448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The size offset was previously being accounted for in flv_set_video_codec
for h264 and mpeg4, instead of being directly accounted for in the spot
where its read, which desynced on HEVC streams.
For clarity, move the size offset directly to the parsing, similar to
how its done for all other header fields.
glcontext was added under CONFIG_SDL2
libavdevice/opengl_enc.c: In function ‘opengl_draw’:
libavdevice/opengl_enc.c:1204:15: error: ‘OpenGLContext’ has no member
named ‘glcontext’
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Fixed: signed integer overflow: -2 * -1085502286 cannot be represented in type 'int'
Fixed: 57986/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AAC_FIXED_fuzzer-5123651145170944
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The implementation does not support k=32
Fixes: shift exponent 32 is too large for 32-bit type 'unsigned int'
Fixes: 57976/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WAVARC_fuzzer-5911925807775744
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 2147443649 + 65535 cannot be represented in type 'int'
Fixes: 60054/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RKA_fuzzer-5095674572832768
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
major/minor are in <sys/types.h> on BSDs and <sys/mkdev.h> on Solaris-like.
libavutil/hwcontext_vulkan.c:55:10: fatal error: 'sys/sysmacros.h' file not found
#include <sys/sysmacros.h>
^~~~~~~~~~~~~~~~~
Take vector reduction out of the loop and unroll.
Before:
audiodsp.scalarproduct_int16_c: 12321.0
audiodsp.scalarproduct_int16_rvv_i32: 4175.7
After:
audiodsp.scalarproduct_int16_c: 12320.5
audiodsp.scalarproduct_int16_rvv_i32: 1230.2
1) Take the reductive sum out of the loop,
leaving a regular vector addition in the loop.
2) Merge the addition and the multiplication.
3) Unroll.
Before:
scalarproduct_float_rvv_f32: 832.5
After:
scalarproduct_float_rvv_f32: 275.2
ffmpeg CLI pixel format selection for filtering currently special-cases
MJPEG encoding, where it will restrict the supported list of pixel
formats depending on the value of the -strict option. In order to get
that value it will apply it from the options dict into the encoder
context, which is a highly invasive action even now, and would become a
race once encoding is moved to its own thread.
The ugliness of this code can be much reduced by moving the special
handling of MJPEG into ofilter_bind_ost(), which is called from encoder
init and is thus synchronized with it. There is also no need to write
anything to the encoder context, we can evaluate the option into our
stack variable.
There is also no need to access AVCodec at all during pixel format
selection, as the pixel formats array is already stored in
OutputFilterPriv.
When -pix_fmt designates a BE/LE pixel format, it gets translated into
the native one by av_get_pix_fmt(). This may not always be the best
choice, as the encoder might only support one endianness. In such a
case, explicitly choose the endianness supported by the encoder.
While this is currently redundant with choose_pixel_fmt() in
ffmpeg_filter.c, the latter code will be deprecated in following commits.
AVISYNTH_INTERFACE_VERSION 10 fell in-between the releases of
3.7.2 and 3.7.3, and is required to be able to read the channel
layout information.
Signed-off-by: Stephen Hutchinson <qyot27@gmail.com>
This cannot beat the Zbb implementation, and it is unlikely that a real
meaningful CPU design would support V and not Zbb. The best loop rewrite
that I could come up with (4 shifts, 2 ands, 3 ors) is still ~40% slower
than Zbb.
A proper faster vector implementation should be feasible with the
cryptographic vector extensions, but that is a story for another time.
The code was blindly assuming that Zbb or V implied Zba. While the
earlier is practically always true, the later broke some QEMU setups,
as V was introduced earlier than Zba.
I cannot find the spec, but according to the original commit
d4fdba0df7, it's CAVS. e571305a71 changed it to AVS by
accident. Ten years on, nothing happened. We still have the
sample [1], however, since there is no cavs_mp4tofoobar bsf, the
cavs decoder doesn't work. I don't know if there is any use case.
[1] https://samples.ffmpeg.org/AVS/AVSFileFormat/AVSFileFormat.mp4
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Even though they have the same size, and typically the same alignment,
uint32_t and float are under no circumstances compatible types in C.
The casts from float * to uint32_t * are invalid here. Insofar as the
resulting pointers are dereferenced, this is undefined behaviour.
This patch uses av_float2int() / av_int2float() instead.
Except for add_squares, telling the compiler that the output vector(s)
cannot alias helps quite a bit (cycles on SiFive U74-MC):
ps_add_squares_c: 98277.7
ps_add_squares_r: 98320.2
ps_hybrid_analysis_c: 3731.2
ps_hybrid_analysis_r: 2495.7
ps_hybrid_analysis_ileave_c: 20478.0
ps_hybrid_analysis_ileave_r: 16092.2
ps_hybrid_synthesis_deint_c: 19051.5
ps_hybrid_synthesis_deint_r: 15420.0
ps_mul_pair_single_c: 122941.2
ps_mul_pair_single_r: 91035.0
Encoders (usually) have no business modifying frame->data
(which need not be writable), so they should use the appropriate
pointers.
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also allocate the AVFrame during init and use av_frame_replace()
to replace it later.
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
frame is always != NULL for audio and video here
(this is checked by an assert and the frame is already dereferenced
before it reaches this code here).
Fixes Coverity issue #1538858.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases the group multiplier as per T-Head C910 benchmarks:
inverse_coupling_c: 4597.0
inverse_coupling_rvv_i32: 1312.7 (m1)
inverse_coupling_rvv_i32: 1116.7 (m2)
inverse_coupling_rvv_i32: 732.2 (m4)
inverse_coupling_rvv_i32: 898.0 (m8)
av_random_bytes() can use OS provided strong random functions and does not
depend soley on openssl/gcrypt external libraries.
Fixes ticket #10441.
Signed-off-by: Marton Balint <cus@passwd.hu>
map_func is supposed to be an array of const pointer to function
returning int, not an array of pointer to function returning const int.
Reported-By: Martin Storsjö
This is not actually used for anything. The configure check causes the
CPU feature flag to be set, but nothing consumes it at all.
While AArch64 does have VFP, it is only used for the scalar C code.
Conversely, it is still possible to disable VFP, by changing the
C compiler flags as before (though that only makes sense for an
hypothetical non-standard Armv8 platform without VFP).
Note that this retains the "vfp" option flag, for backward
compatibility and on the very remote but theoretically possible chance
that FFmpeg actually makes use of it in the future.
AV_CPU_FLAG_VFP is retained as it is actually used by AArch32.
The IMDCT offset is only relevant for NEON optimisations. There are no
VFP optimisations here that would justify the HAVE_VFP flag. In
practice, this makes no difference because HAVE_NEON is practically
always true for standard Armv8 platforms.
Requires a new upstream function to test not for *import* support on a
given output pixel format, but also whether we can render to it.
Fixes: https://github.com/haasn/libplacebo/issues/173
Stop claiming the argument is always a floating point number, which
* confuses floating point and decimal numbers
* is not always true even accounting for the above point
Read the timebase from FrameData rather than the input stream. This
should fix#10393 and generally be more reliable.
Replace the use of '-1' to indicate demuxing timebase with the string
'demux'. Also allow to request filter timebase with
'-enc_time_base filter'.
It now contains data from multiple sources, so group those items that
always come from the decoder. Also, initialize them to invalid values,
so that frames that did not originate from a decoder can be
distinguished.
This is possible now that enc_open() is always called with a non-NULL
frame for audio/video.
Previously the code would directly reach into the buffersink, which is a
layering violation.
When no frames were passed from a filtergraph to an encoder, but the
filtergraph is configured (i.e. has output parameters), encoder flush
code will use those parameters to initialize the encoder in a last-ditch
effort to produce some useful output.
Rework this process so that it is triggered by the filtergraph, which
now sends a dummy frame with parameters, but no data, to the encoder,
rather than the encoder reaching backwards into the filter.
This approach is more in line with the natural data flow from filters to
encoders and will allow to reduce encoder-filter interactions in
following commits.
This code is tested by fate-adpcm-ima-cunning-trunc-t2-track1, which (as
confirmed by Zane) is supposed to produce empty output.
This line was added in c30a4489b4 along with
AVStream.sample_aspect_ratio. However, configuring SAR for video
encoding is now done after this code (specifically in enc_open(), which
is called when the first video frame to be encoded is obtained), so this
line cannot have any meaningful effect.
Replace duplicated(!) and broken* custom string parsing with
av_dict_parse_string(). Return error codes instead of aborting.
* e.g. it treats NULL returned from av_get_token() as "separator not
found", when in fact av_get_token() only returns NULL on memory
allocation failure
This decoding flag makes decoders drop all frames after a parameter
change, but what exactly constitutes a parameter change is not well
defined and will typically depend on the exact use case.
This functionality then does not belong in libavcodec, but rather in
user code
Copy packet side data to the output frame in ff_decode_frame_props_from_pkt()
instead of in discard_samples(), having the latter only applying the skip if
required.
This will be useful for the following commit.
Signed-off-by: James Almer <jamrial@gmail.com>
Prevent the fifo used in encoding VPx videos from filling up and
stopping encode when it reaches 21845 items, which happens when the
video has more than that number of frames.
Incorporated suggestion from James Zern to prevent calling
frame_data_submit() at all when performing the first pass of a 2-pass
encode so the fifo is not filled at all; replaces original patch which
drained the fifo after filling to prevent it from becoming full.
Fixes the regression originally introduced in
5bda4ec6c3
Co-authored-by: James Zern <jzern@google.com>
Signed-off-by: David Lemler <david@lemler.family>
Signed-off-by: James Zern <jzern@google.com>
In some versions of libsvtav1, setting intra_period_length to 0
does not produce the intended result (i.e.) all frames produced
are not keyframes.
Instead handle the gop_size == 1 as a special case by setting
the pic_type to EB_AV1_KEY_PICTURE when encoding each frame so
that all the output frames are keyframes.
SVT-AV1 Bug: https://gitlab.com/AOMediaCodec/SVT-AV1/-/issues/2076
Example command: ffmpeg -f lavfi -i testsrc=duration=1:size=64x64:rate=30 -c:v libsvtav1 -g 1 -y test.webm
Before: Only first frame is keyframe, rest are intraonly.
After: All frames are keyframes.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Add missing operand which clang complains about but GCC assumes it to be
'm1' if not specified.
Works around build failure with Clang:
| src/libswscale/riscv/rgb2rgb_rvv.S:88:25: error: operand must be e[8|16|32|64|128|256|512|1024],m[1|2|4|8|f2|f4|f8],[ta|tu],[ma|mu]
| vsetvli t4, t3, e8, ta, ma
| ^
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
EOF from sq_receive() means no packets will ever be output by the sync
queue. Since the muxing sync queue is always used by all interleaved
(i.e. non-attachment) streams, this means no further packets can make
it to the muxer and we can terminate muxing now.
Since “2d924b3a63 fftools/ffmpeg: move each muxer to a separate thread”,
opengl_write_packet() is called from a different thread than
opengl_write_header() and would nothing for lack of a selected context.
Mention encoder name in the message to emphasize that the value in
question is not supported by this specific encoder, not necessarily by
libavcodec in general.
Print a list of values supported by the encoder.
Useful for discovering bugs that depend on a specific thread count.
Use like THREADS=randomX for a random thread count from 1 to X, with
X=16 when not specified. Note that the thread count is different for
every test.
That feature is overkill for a constant pointer to AVFilterLink which
can be stored in AVCodecContext.opaque (indirectly, because the link is
not allocated yet at the time the codec is opened).
This also avoids leaking non-NULL AVFrame.opaque to callers.
Git master libjxl changed several function signatures, so this commit
adds some #ifdefs to handle the new signatures without breaking old
releases. Do note that old git master development versions of libjxl
will be broken, but no releases will be.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
From the spec: "It is a requirement of bitstream conformance that
the value of luma_bit_depth_entry_minus8 shall be equal to
the value of bit_depth_luma_minus8"; similarly for chroma.
Also fixes Coverity ticket #1529226 (complaining about the fact
that chroma_bit_depth_entry is checked twice).
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
I don't pretend to understand how we get into this situation, but there
are files out there where we can end up with the active PPS not being
identified when we call vk_hevc_end_frame. In these situations today,
we will segfault. So, before we give up, see if we can get the active
PPS id from the slice header, and use that if possible.
If that still doesn't work, return an error instead of segfaulting.
Also fix a couple of possible overflows while at it.
Fixes the negative initial timestamps in ticket #10358.
Signed-off-by: Marton Balint <cus@passwd.hu>
BMDTimeValue is defined as LONGLONG on Windows, but int64_t on Linux/Mac.
Fixes format string warnings:
libavdevice/decklink_enc.cpp: In function ‘void construct_cc(AVFormatContext*, decklink_ctx*, AVPacket*, klvanc_line_set_s*)’:
libavdevice/decklink_enc.cpp:424:48: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 4 has type ‘BMDTimeValue {aka long int}’ [-Wformat=]
ctx->bmd_tb_num, ctx->bmd_tb_den);
~~~~~~~~~~~~~~~ ^
libavdevice/decklink_enc.cpp:424:48: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 5 has type ‘BMDTimeValue {aka long int}’ [-Wformat=]
Signed-off-by: Marton Balint <cus@passwd.hu>
libavutil/random_seed.c calls arc4random_buf which is
not available on OSX 10.4 Tiger, but the configuration
script tests for arc4random which is available.
Fix the configuration test to match the actual API used.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
When intra_refresh is enabled, gopLength is equal to
NVENC_INFINITE_GOPLENGTH. gopLength should be 1 at least.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Changes the result of fate-mxf-probe-dv25, where the bitrate is now
exported.
Also changes the result of fate-bsf-dv-error-marker, where the exported
bitrate is now different. Note that the codec layer bitrate does not
match the container bitrate, because container timing is 25fps, while
the DV profile is 50.
This way decoding errors will not be returned when the user starts
draining the decoder, avoiding confusion over whether draining did or
did not start.
Fixes failures of fate-h264-attachment-631 for certain numbers of frame
threads (e.g. 5).
Do it from ff_decode_get_packet() rather than from
avcodec_send_packet(). This way all nontrivial stages of the decoding
pipeline (i.e. other than just placing a packet at its entrance) are
pull-based rather than a mix of push an pull.
Decoding pipeline has multiple stages, some of which may have their own
delay (e.g. bitstream filters). The code currently uses
AVCodecInternal.draining to track all of them, but they do not have to
all be in sync.
The goal is to distinguish between APIs provided by the generic layer to
individual codecs and APIs internal to the generic layer.
Start by moving ff_{decode,encode}_receive_frame() and
ff_{decode,encode}_preinit() into this new header, as those functions
are called from generic code and should not be visible to individual
codecs.
For uint8_t buf[EVC_NALU_LENGTH_PREFIX_SIZE], &buf still points
to the beginning of buf, but it is of type "pointer to array of
EVC_NALU_LENGTH_PREFIX_SIZE uint8_t" (i.e. pointer arithmetic
would operate on blocks of size EVC_NALU_LENGTH_PREFIX_SIZE).
This is of course a different type than uint8_t*, which is why
there have been casts in evc_read_packet(). But these are unnecessary
if one justs removes the unnecessary address-of operator.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Not sure if the function naming frame_queue_destory is intended because
"destory" is not really a word. Changing it to "destroy" makes more sense.
Signed-off-by: QiTong Li <liqitong@163.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
example clips:
* 12b444vvc1_E_Sony_2
* 12b444Ietsrc_A_Kwai_2
* 10b444P16_D_Sony_2
* 12b444Iepp_A_Sharp_2
* 12b444SPetsrc_B_Kwai_2
Co-authored-by: Nuo Mi <nuomi2021@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Add an optional filter_line3 to the available optimisations.
filter_line3 is equivalent to filter_line, memcpy, filter_line
filter_line shares quite a number of loads and some calculations in
common with its next iteration and testing shows that using aarch64
neon filter_line3s performance is 30% better than two filter_lines
and a memcpy.
Adds a test for vf_bwdif filter_line3 to checkasm
Rounds job start lines down to a multiple of 4. This means that if
filter_line3 exists then filter_line will not sometimes be called
once at the end of a slice depending on thread count. The final slice
may do up to 3 extra lines but filter_edge is faster than filter_line
so it is unlikely to create any noticable thread load variation.
Signed-off-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Martin Storsjö <martin@martin.st>
Exports C filter_line needed for tail fixup of neon code
Adds neon for filter_line
Signed-off-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Martin Storsjö <martin@martin.st>
Adds clip and spatial macros for aarch64 neon
Exports C filter_edge needed for tail fixup of neon code
Adds neon for filter_edge
Signed-off-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Martin Storsjö <martin@martin.st>
Adds an outline for aarch neon functions
Adds common macros and consts for aarch64 neon
Exports C filter_intra needed for tail fixup of neon code
Adds neon for filter_intra
Signed-off-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Martin Storsjö <martin@martin.st>
Stop overwriting values from the bitstream arrays pps_tile_column_width_minus1
and pps_tile_row_height_minus1.
Signed-off-by: James Almer <jamrial@gmail.com>
Uses the existing code for av_get_random_seed() to return a buffer with
cryptographically secure random data, or an error if none could be generated.
Signed-off-by: James Almer <jamrial@gmail.com>
This ensures the requested amount of bytes is read.
Also remove /dev/random as it's no longer necessary.
Signed-off-by: James Almer <jamrial@gmail.com>
The HDR metadata should be removed after HDR to SDR conversion,
otherwise the output frame still has HDR side data.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
This makes the filter output match that of the C version.
It was left intentionally while we figured out if it was better
or not, and while it makes certain samples better, it makes static
samples jump around slightly.
The standard only defined configurationVersion 1.
configurationVersion 0 is for backward compatibility predates the
standard.
This patch reduces the chance that some malformated streams being
detected as hvcC.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
This is needed to ensure that AFD data continues to work when
capturing V210 video with the Decklink libavdevice input.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Support decoding and embedding VANC packets delivered via SMPTE 2038
into the SDI output. We leverage an intermediate queue because
data packets are announced separately from video but we need to embed
the data into the video frame when it is output.
Note that this patch has some additional abstraction for data
streams in general as opposed to just SMPTE 2038 packets. This is
because subsequent patches will introduce support for other
data codecs.
Thanks to Marton Balint for review/feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The existing queue initialization function would always sets it's
maximum queue size to ctx->queue_size. But because we are introducing
more queues we may want the sizes to differ between them.
Move the specification of the queue size into an argument, which can
be passed from the caller.
This patch makes no functional change to the behavior. It is being
made to accommodate Marton Balin's request to split out the queue
size for the new VANC queue being introduced in a later patch.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Use CFDictionarySetValue to enable low-latency encoding mode.
Since the key is a type of "EncoderSpecification", instead of
"CompressionProperty".
Signed-off-by: xufuji456 <839789740@qq.com>
Signed-off-by: Rick Kern <kernrj@gmail.com>
No need to generate intermediate files and probe them. We only care to know that the
output of the bsf excludes the frames in question, and a simple checksum is enough.
Signed-off-by: James Almer <jamrial@gmail.com>
VVCParserContext.au_info is only used once (and in a read-only manner);
but this happens immediately after au_info has been completely
overwritten. Therefore one can just the src structure used to overwrite
au_info directly and remove au_info.
This also means that the whole referencing and unreferncing of au_info
(which duplicates AVBufferRefs CodedBitstreamH266Context and is
therefore of dubious gain) can be removed, as can the AVBufferRef*
contained in PuInfo; this also removes a certain uglyness: Sometimes
these AVBufferRef* were ownership pointers and sometimes not.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Content-Type can include charset and boundary which is not a part of
mime type and shouldn't be copied as such.
Fixes HLS playback when the Content-Type includes additional fields.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
The discrepancy between the definition and the declaration
in allformats.c is actually UB.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The discrepancy between the definition and the declaration
in allfilters.c is actually UB.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The discrepancy between the definition and the declaration
in parsers.c is actually UB.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add demuxer to probe raw vvc and parse vvcc byte stream format.
Co-authored-by: Nuo Mi <nuomi2021@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Add CodedBitstreamContext to parse VPS,SPS,PPS in VVC nal units.
Implement parsing and writing of SPS,PPS,VPS,PH,AUD,SEI and slices.
Add ff_cbs_type_h266 to cbs types tables and AV_CODEC_ID_H266
to cbs codec ids.
Co-authored-by: Thomas Siedel <thomas.ff@spin-digital.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This combination is not working (it writes out of array)
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This partially reverts commit d0fc1b3507, which reintroduced a regression
originally fixed in 5e9986fd2d.
Signed-off-by: James Almer <jamrial@gmail.com>
When qsv device is created by device_derive, the ctx->free function is
not registered, causing potential memory leak because of not properly
closing the MFX session.
Signed-off-by: Tong Wu <tong1.wu@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
The issue is that while decode_slice is guaranteed to never get
called without start_frame, end_frame is not. Moreover, it is
not guaranteed it won't be called twice.
On a badly-broken sample, this is what happens, which leads to
a segfault, as vp->slices_buf doesn't exist, as it has been handed
off for decoding already and isn't owned by the frame.
Return an error as it's indicative that it's a corrupt stream rather
than just missing any slices.
Prevents a segfault.
Should fix integer overflows, and improve encoding results.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
mov_try_read_block() allocates 1MB at least, which can be more than
enough. It was called when reading saiz box, which can appear
periodically inside fmp4. This consumes a lot of memory.
We can fix mov_try_read_block() by clamp 'block_size' with 'size'.
However, the function is harmful than helpful. It avoids allocating
large memory when the real data is small. Even in that case, if
allocating large memory directly failed, it's fine to return ENOMEM;
if allocating success and reading doesn't match the given size, it's
fine to free and return AVERROR_INVALIDDATA. In other cases, it's a
waste of CPU and memory.
So I decided to remove the function, and replace it by call
av_malloc() and avio_read() directly.
mov_read_saiz() and mov_read_pssh() need more check, but they don't
belong to this patch.
Fixes#7641 and #9243.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The old logic was trying to be excessively clever in "deducing" that the
user wanted to stretch/scale the image when ow/oh differed from iw/ih
aspect ratio. But this is almost surely unintended except in
pathological cases, and in those cases users should simply disable
normalize_sar and do all the stretching/scaling logic themselves. This
is especially important in multi-input mode, where the canvas may be
vastly different from the input dimensions of any stream. Also, passing
through input 0 SAR in multi-input mode is arbitrary and nearly useless,
so again force output SAR to 1:1 here.
Parse through all NALUs in a packet, pull new ones when a complete AU could not
be assembled, or keep them around if an AU was assembled while data remained in
them.
Signed-off-by: James Almer <jamrial@gmail.com>
Default GOP size is now set by preset and tuning info. This GOP size is only overwriten if -g value is provided.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
As per the spec:
VUID-VkVideoDecodeH264PictureInfoKHR-sliceCount-arraylength
sliceCount must be greater than 0
VUID-VkVideoDecodeH265PictureInfoKHR-sliceSegmentCount-arraylength
sliceSegmentCount must be greater than 0
This particularly happens with seeking in field-coded H264.
This commit scraps a bool to signal to recreate the session parameters,
but instead destroys them, forcing them to be recreated.
As this can happen between start_frame and end_frame, do this
at both places.
Move the slice offsets buffer to the thread decode context.
It isn't part of the resources for frame decoding, the driver
has to process and finish with it at submission time.
That way, it doesn't need to be alloc'd + freed on every frame.
This requires using the new AVHWFramesContext.opaque field, as
otherwise, the profile attached to the decoder will be freed
before the frames context, rendering the frames context useless.
But ensure the value returned by evc_read_nal_unit_length() fits in an int.
Should prevent integer overflows later in the code.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixed-point AAC decoder currently does not produce the same output on
all platforms. Until that is fixed, silence the audio stream using the
volume filter.
Also, actually use the aac_fixed decoder as was the original intent.
Before the introduction of AV_CODEC_ID_TIMED_ID3 for timed_id3 metadata streams
in mpegts (commit 4a4437c0fb), AV_CODEC_ID_SMPTE_KLV
was the only existing codec for metadata.
It seems that this codec has a 5-bytes metadata header[1] that, for some reason,
was always skipped when decoding data packets.
However, when working with a AV_CODEC_ID_TIMED_ID3 streams, this results in the
5 first bytes of the payload being cut-off, which includes essential informations
such as the ID3 tag version.
This patch fixes the issue by keeping the 5-bytes skip only for AV_CODEC_ID_SMPTE_KLV
streams.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Use the gcd of all input timebases to ensure PTS accuracy. For the
framerate, just pick the highest of all the inputs, under the assumption
that we will render frames with approximately this frequency. Of course,
this is not 100% accurate, in particular if the input frames are badly
misaligned. But this field is informational to begin with.
Importantly, it covers the "common" case of combining high FPS and low
FPS streams with aligned frames.
In the event that some frame mixes are OK while others are not, the
priority goes:
1. Errors in updating any frame -> return error
2. Any input incomplete -> request frames and return
3. Any inputs OK -> ignore EOF streams and render remaining inputs
4. No inputs OK -> set output to most recent status
This logic ensures that we can continue rendering the remaining streams,
no matter which streams reach their end of life, until we have no
streams left at which point we forward the last EOF.
When combining multiple inputs, the output PTS may be less than the PTS
of the input. In this case, the current's code assumption of always
draining one value from the FIFO is incorrect. Replace by a smarter
function which drains only those PTS values that were actually consumed.
When combining multiple inputs with different PTS and durations, in
input-timed mode, we emit one output frame for every input frame PTS,
from *any* input. So when combining a low FPS stream with a high FPS
stream, the output framerate would match the higher FPS, independent of
which order they are specified in.
Subsequent inputs require frame blending to be enabled, in order to not
overwrite the existing frame contents.
For output metadata, we implicitly copy the metadata of the *first*
available stream (falling back to the second stream if the first has
already reached EOF, and so on). This is done to resolve any conflicts
between inputs with differing metadata. So when e.g. input 1 is HDR and
output 2 is SDR, the output will be HDR, and vice versa. This logic
could probablly be improved by dynamically determining some "superior"
set of metadata, but I don't want to handle that complexity in this
series.
Instead of finding the ref frame in output_frame() and then passing its
signature to update_crops(), pull out the logic and invoke it a second
time inside update_crops().
This may seem wasteful at present, but will actually become required in
the future, since update_crops() runs on *every* input, and needs values
specific to that input (which the signature isn't), while output_frame()
is only interested in a single input. It's much easier to just split the
logic cleanly.
Including the queue status, because these will need to be re-queried
inside output_frame_mix when that function is refactored to handle
multiple inputs.
In anticipation of a refactor which will enable multiple input support.
Note: the renderer is also input-specific because it maintains a frame
cache, HDR peak detection state and mixing cache, all of which are tied
to a specific input stream.
If the input queue is EOF, then the s->status check should already have
covered it, and prevented the code from getting this far.
If we still hit this case for some reason, it's probably a bug. Better
to hit the AVERROR_BUG branch.
Incrementing a NULL pointer is undefined behaviour,
yet this is what would happen in case trailer were NULL
before the check.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We will postpone the vpp session initialization to when input and output
frames are ready, this copy of the sequence parameters will be used to
initialize vpp session.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
In ff_rtp_send_jpeg, the type is defined based on PIX_FMT and
color-range parsed in. There is limitation on current design
where need to include support newly introduced PIX_FMT such as
AV_PIX_FMT_QSV and there might be more and more in future. Hence,
retrive the sampling factor from SOF0 in JPEG compressed header
directly. This introduces flexibility to handle different type of
new codec introduced in future.
Signed-off-by: Yeoh, Hoong Tee <hoong.tee.yeoh@intel.com>
- text is now shaped using libharfbuz
- glyphs position is now accurate to 1/4 pixel in both directions
- the default line height is now the one defined in the font
Adds libharfbuzz dependency.
This is only a preparatory step to a fully threaded architecture and
does not yet make decoding truly parallel - the main thread will
currently submit a packet and wait until it has been fully processed by
the decoding thread before moving on. Decoder behavior as observed by
the rest of the program should remain unchanged. That will change in
future commits after encoders and filters are moved to threads and a
thread-aware scheduler is added.
It is only used for flushing the subtitle decoder, so allocate a
dedicated packet for that.
Keep Decoder.pkt unused for now, it will be repurposed in future
commits.
Make the function process just one input stream at a time and save an
indentation level. Also rename it to ist_add() to be consistent with an
analogous function in ffmpeg_mux_init.
This can happen when user set the avctx->profile field directly
instead of specify profile via option.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Other than save a few bytes, it also has the benefit to show the
AV_OPT_TYPE_CONST value in help, e.g.,
-profile <int> E..V....... Profile (from 0 to INT_MAX) (default 0)
baseline 66 E..V....... Baseline Profile
...
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
H.264 high10/high422/high44 are unlikely supported by devices.
It's there for developers to do the experiment.
H.265 main10 works on my device with AV_PIX_FMT_MEDIACODEC.
OMX_COLOR_FormatYUV420Planar16 doesn't work.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
This switches the jpegxl_collect_codestream_header function to use
avcodec/bytestream2, which better enforces barriers, and should avoid
overrunning buffers with jxlp boxes if the size is zero or if the size
is so small the box is invalid.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Fixes: runtime error: pointer index expression with base 0x000000000000 overflowed to 0xfffffffffffffff8
Fixes: 58440/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-5956015530311680
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: avcodec/takdsp.c:44:23: runtime error: signed integer overflow: -2097158 - 2147012608 cannot be represented in type 'int'
Fixes: 58417/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TAK_fuzzer-5268919664640000
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes the null pointer checks match mpv_motion_internal()
Fixes: NULL pointer dereference
Fixes: 59671/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEG1VIDEO_fuzzer-4993004566609920
Fixes: 59678/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEGVIDEO_fuzzer-4893168991338496
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -38912000 + -2109276160 cannot be represented in type 'int'
Fixes: 59670/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RKA_fuzzer-4987563245699072
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The implementation is flawed in that the frame opaque data is not in
fact correctly reordered along with the packets, but is being output in
packet input order, just like the dts are.
This reverts commit 3553809703.
I've been sitting on this for 3 1/2 years now(!), and I finally got
around to fixing the loose ends and convincing myself that it was
correct. It follows the same basic structure as yadif_cuda, including
leaving out the edge handling, to avoid expensive branching.
As we are introducing two new formats and supporting conversions
between them, and also with the existing 0rgb32/0bgr32 formats, we get
a combinatorial explosion of kernels. I introduced a few new macros to
keep the things mostly managable.
The conversions are all simple, following existing patterns, with four
specific exceptions. When converting from 0rgb32/0bgr32 to rgb32/bgr32,
we need to ensure the alpha value is set to 1. In all other cases, it
can just be passed through, either to be used or ignored.
When an option could not be found, print its name and value. Note that
this is not done while applying the options in
avfilter_graph_segment_apply_opts() to give the caller the option of
handling the missing options in some other way.
The issue is that with a threadsafe hwaccel and multiple enabled
frame threads, hwaccel->uninit() is never called.
Previously, the function was guaranteed to never have any threads
with hwaccel contexts, so it never bothered to uninit any.
nvenc declares support for these formats, but if hwcontext_cuda doesn't
do that as well, then it's not possible to hwupload them for use in a
possible cuda pipeline before encoding.
I'm not sure why I originally did this, but there's no good reason to
put pointers to the cuda context and stream in the priv struct. They
are directly available in the device context that is already being
stored there.
- Changes in mov_write_video_tag function to handle EVC elementary stream
- Provided structure EVCDecoderConfigurationRecord that specifies the decoder configuration information for ISO/IEC 23094-1 video content
Signed-off-by: Dawid Kozinski <d.kozinski@samsung.com>
This reverts commit 9a245bdf5d.
This commit basically broke all samples with fractional framerates,
rather than fixing them.
I at this point do not understand the original issue anymore, and I'm
not sure how this slipped my initial testing.
All my test samples must have happened to have a simple timebase.
The actual dts values pretty much always are just a simple chain of
1,2,3,4,5,... Or maybe slightly bigger steps. Each increase by one means
an advance in time by one unit of the timebase.
So a fractional framerate/timebase is already not an issue.
So with this patch applied, the calculation might end up substracting
huge values (1001 is a common one) from the dts, which would be an
offset of that many frames, not of that many fractions of a second.
This broke at least muxing into mp4, if the sample happened to have a
fractional framerate.
I do not thing the original issue this patch tried to fix existed in the
first place, so it can be reverted without further consequences.
This flag is used to indicate to the hw frames in the gaps,
vaapi constructs it from a bunch of implicit API information
around surface ids. vulkan should just send it explicitly.
Reviewed-by: Lynne <dev@lynne.ee>
Enable the checked bitreader to avoid overread.
Also add a few checks in loops and between blocks so we exit instead of continued
execution.
Alternatively we could add manual checks so that no overread can happen. This would be
slightly faster but a bit more work and a bit more fragile
Fixes: Out of array accesses
Fixes: 59640/clusterfuzz-testcase-minimized-ffmpeg_dem_JPEGXL_ANIM_fuzzer-6584117345779712
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The tag comes from samples/ffmpeg/mov/unrecognized/bartjones.mov
really looks like some random data. Now the random tag matched
another file, which isn't a mov.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
This also fixed a warning: implicit conversion from enumeration
type 'TF_DataType' (aka 'enum TF_DataType') to different
enumeration type 'DNNDataType'.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Determined experimentally, on various videos and hardware.
On Intel, using less resources in-flight is around 15% faster,
with similar results on Nvidia hardware.
This reduces memory needed dramatically, as unneeded resources
can be immediately returned to the pool.
Although waitforfences is threadsafe, we add a mutex wait around
it, as the mutex fence in combination with waitforfences assures
us that no other thread will reset the fence in the meanwhile
whilst the mutex is locked. This allows is to call
ff_vk_exec_discard_deps.
It was introduced for Vulkan, but it is equivalent to
short_term_ref_pic_set_size when !short_term_ref_pic_set_sps_flag,
and when !!short_term_ref_pic_set_sps_flag, Vulkan hardcodes a zero
anyway.
The old code was not properly handling a bunch of edge-cases with
streams terminating earlier and also did not properly report back EOF
to the first input.
This fixes at least one case where the filter could stop doing
anything:
ffmpeg -f lavfi -i "color=blue:d=10" -f lavfi -i "color=aqua:d=0" -filter_complex "[0][1]xfade=duration=2:offset=0:transition=wiperight" -f null -
Wrapped frames contain pointers so they need specific code to
noise them, the generic code would lead to segfaults
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For now, there's not much value in this since Clang don't support
enabling the dotprod or i8mm features with either .arch_extension
or .arch (it has to be enabled by the base arch flags passed to
the compiler). But it may be supported in the future.
Signed-off-by: Martin Storsjö <martin@martin.st>
These are available since ARMv8.4-a and ARMv8.6-a respectively,
but can also be available optionally since ARMv8.2-a.
Check if ".arch armv8.2-a" and ".arch_extension {dotprod,i8mm}" are
supported, and check if the instructions can be assembled.
Current clang versions fail to support the dotprod and i8mm
features in the .arch_extension directive, but do support them
if enabled with -march=armv8.4-a on the command line. (Curiously,
lowering the arch level with ".arch armv8.2-a" doesn't make the
extensions unavailable if they were enabled with -march; if that
changes, Clang should also learn to support these extensions via
.arch_extension for them to remain usable here.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Animated JPEG XL files requires a separate demuxer than image2, because
the timebase information is set by the demuxer. Should the timebase of
an animated JPEG XL file be incompatible with the timebase set by the
image2pipe demuxer (usually 1/25 unless set otherwise), rescaling will
fail. Adding a separate demuxer for animated JPEG XL files allows the
timebase to be set correctly.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Migrate the libjxl decoder wrapper from the decode_frame method to the
receive_frame method, which allows sending more than one frame from a
single packet. This allows the libjxl decoder to decode JPEG XL files
that are animated, and emit every frame of the animation. Now, clients
that feed the libjxl decoder with an animated JPEG XL file will be able
to receieve the full animation.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Currently of_output_packet() reuses the input packet, which requires its
callers to submit blank packets even on EOF, which makes the code more
complex.
It is set by the muxing code, which will not be synchronized with
encoding code after upcoming threading changes. Use an encoder-private
variable instead.
Packets submitted to the muxer now have their timebase attached to them,
so the muxer can do conversion to muxing timebase and avoid exposing it
to callers.
There is no reason to postpone it until opening the encoder. Also, abort
when the input stream is unknown, rather than disregard an explicit
request from the user.
The code will currently add a small offset to avoid exact midpoints, but
this can cause inexact results when a float timestamp is exactly
representable as an integer.
Fixes off-by-one in the first frame duration in multiple FATE tests.
Fixes: signed integer overflow: 9079256848778919936 - -288230376151711746 cannot be represented in type 'long'
Fixes: 58248/clusterfuzz-testcase-minimized-ffmpeg_dem_OGG_fuzzer-6326851353313280
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In certain use cases, controlling the maximum frame size is critical. An
example is when transmitting AAC packets over Bluetooth A2DP.
While the spec allows the packets to be fragmented (but UNRECOMMENDED),
in practice most headsets do not recognize nor reassemble such packets.
In this patch, we allow setting `bit_rate_tolerance` to 0 to indicate
that the specified bit rate should be treated as an upper bound up to
frame level.
Signed-off-by: Jeremy Wu <jrwu@chromium.org>
Today, cuda is not able to import multiplane images, and cuda requires
images to be imported whether you trying to import to cuda or export
from cuda (in the later case, the image is imported and then copied
into on the cuda side). So any interop between cuda and vulkan requires
that multiplane be disabled.
The existing option for this is not sufficient, because when deriving
devices it is not possible to specify any options.
And, it is necessary to derive the Vulkan device, because any pipeline
that involves uploading from cuda to vulkan and then back to cuda must
use the same cuda context on both sides, and the only way to propagate
the cuda context all the way through is to derive the device at each
stage.
ie:
-vf hwupload=derive_device=vulkan,<filters>,hwupload=derive_device=cuda
Added support for more VideoToolbox encoder options:
- qmin and qmax options are now used
- max_slice_bytes: Max number of bytes per H.264 slice
- max_ref_frames: Limit the number of reference frames
- Disable open GOP when the cgop flag is set
- power_efficient: Enable power-efficient mode
Signed-off-by: Rick Kern <kernrj@gmail.com>
The contents of this field are not defined for decoding. Use
pkt_timebase, which is the timebase of demuxed packets.
Drop a tautological av_packet_rescale_ts() call, as the stream and
decoder timebases are the same.
Current code marks the output stream as finished and waits for a flush
packet, but that is both unnecessary and suspect, as in theory nothing
should be sent to a finished stream - not even flush packets.
Make all relevant state per-filtergraph input, rather than per-input
stream. Refactor the code to make it work and avoid leaking memory when
a single subtitle stream is sent to multiple filters.
Set them in ifilter_parameters_from_dec(), similarly to audio/video
streams. This reduces the extent to which sub2video filters need to be
treated specially.
This function should not take an InputStream, as it only uses it to get
the InputFile and the timebase. Pass those directly instead and avoid
confusion over dealing with multiple InputStreams.
This queue should be associated with a specific filtergraph input - if
a subtitle stream is sent to multiple filters then each should have its
own queue.
This code is a sub2video analogue of ifilter_send_frame(), so it
properly belongs to the filtering code.
Note that using sub2video with more than one target for a given input
subtitle stream is currently broken and this commit does not change
that. It will be addressed in following commits.
When the filtergraph has no inputs, it can be configured immediately
when all its outputs are bound to output streams. This will simplify
treating some corner cases.
This way the list of filtergraph inputs/outputs is always known after
FilterGraph creation. This will allow treating simple and complex
filtergraphs in a more uniform manner.
Currently NULL would be passed for simple filtergraphs, which would
make the filter code extract the graph description from the output
stream when needed. This is unnecessarily convoluted.
The existing DecklinkQueue implementation was using the PacketList
structure but wasn't using the standard avpriv_packet_list_get and
avpriv_packet_list_put functions. Convert to using them so we
eliminate the duplicate logic, per Marton Balint's suggestion.
Updated to reflect feedback from Marton Balint provided on 05/11/23.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Check init_get_bits' result for NULL, to avoid dereferencing a NULL
pointer later (CWE-476).
Without this, a segfault happens when trying to decode a handcrafted
ogg-flac file with an absurdly long (e.g. 268435455 bytes) ogg header.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Paul Arzelier <paul.arzelier@free.fr>
Importing Vulkan device on older versions no longer works due to the
lavu vulkan API changes (specifically, the switch to planar textures by
default). Additionally, importing on versions that don't suppirt
lock/unlock_queue is unsafe with the advent of the threaded vulkan
hwaccel. As a plus, saves us some annoying #ifdef boilerplate.
I will raise the minimum vf_libplacebo version globally on the next
stable release of libplacebo, and remove all of these checks.
Added prerequisites that must be met before providing support for the MPEG-5 EVC codec
- Added new entry to codec IDs list
- Added new entry to the codec descriptor list
- Bumped libavcodec minor version
- Added profiles for EVC codec
Signed-off-by: Dawid Kozinski <d.kozinski@samsung.com>
Signed-off-by: James Almer <jamrial@gmail.com>
According to Dave Airlie:
> <airlied> but I think ignoring it should be fine, I can't see any
> other way to get the imaeg extents correct for other usage
> <Lynne> what width/height should be used for the images?
> the final presentable dimensions, or the coded dimensions?
> <airlied> if you don't want noise I think the presentable dims
> <airlied> the driver should round up the allocations internally,
> but if you are going to sample from the images then w/h have to be
> the bounds of the image you want
> <airlied> since otherwise there's no way to stop the sampler from
> going outside the edges
Apparently, the alignment values are informative, rather than mandatory,
but the spec's wording makes it sound as if they're mandatory.
Previously floats where scaled up to 32bit int, but floats do not
have 32bits in their mantisse so a quarter of the bits where nonsense.
It seems no fate test is affected by this change, which is interresting
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The new function is much more precise
For default beta it is slightly slower, but its speed is already at the
worst case in that comparison
while the replaced function becomes much slower for larger beta
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
0th order modified bessel function of the first kind are used in multiple
places, lets avoid having 3+ different implementations
I picked this one as its accurate and quite fast, it can be replaced if
a better one is found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -9223372036854775808 - 2082844800 cannot be represented in type 'long'
Fixes: 58384/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-6428383700713472
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When seeking through MBAFF-coded H264, this can happen. Decoding calls end_frame
without calling start_frame. We are unable to decode this, as no frame
state has been set.
Happens for both VAAPI and Vulkan. Could be an issue elsewhere, hence
the individual commit.
There are circumstances where the flag isn't set but the skip mode
frames are. So don't use the inferred bit which has other inputs
when deciding to pass the skip mode frames to the device.
This fixes some decoding bugs on intel av1
The temporary AVFrame on staack enables us to use the common
dependency/dispatch code in prepare_frame().
The prepare_frame() function is used for both frame initialization
and frame import/export queue family transfer operations.
In the former case, no AVFrame exists yet, so, as this is purely
libavutil code, we create a temporary frame on stack. Otherwise,
we'd need to allocate multiple frames somewhere, one for each
possible command buffer dispatch.
The idea was that it's faster to map linear images and copy them
via regular memcpy. This is a very niche use, plus very inconsistently
useful, as it would only really be faster on a few Intel GPUs.
Even then, using the non-cached memcpy would've been better.
Instead, scrap this code. Drivers are better at figuring out
what copy to use, and if we're host-mapping, it should actually be
just as fast, if not faster.
This commit adds proper handling of multiplane images throughout
all of the hwcontext code. To avoid breakage of individual
components, the change is performed as a single commit.
This commit rewrites the majority of vulkan.c to enable its use
as a general-purpose high-level utility code, usable for decoding,
encoding, and filtering of video frames.
The dependency system was rewritten to simplify management of
execution.
The image handling system was rewritten to accomodate multiplane
images.
Due to how related all the new features were, this is a single
commit.
This just disables the vulkan headers from defining any symbols
like vkCmdPipelineBarrier2(). Instead, all functions must be loaded
via the loader and used as function pointers as vk->CmdPipelineBarrier2.
Mostly just forces developers to write correct code, as using the
symbols can be undesirable in case API users define their own
function wrappers via the loader API.
The hack was added to enable exporting of vulkan images to DRM.
On Intel hardware, specifically for DRM images, all planes must be
allocated next to each other, due to hardware limitation, so the hack
used a single large allocation and suballocated all planes from it.
By natively supporting multiplane images, the driver is what decides
the layout, so exporting just works.
It's a hack because it conflicted heavily with image allocation, and
with the whole ecosystem in general, before multiplane images were
supported, which just made it redundant.
This is also the commit which broke the hwcontext hardest and prompted
the entire rewrite in the first place.
This just bumps the required loader library version (libvulkan).
All device-related features, such as video decoding, atomics, etc.
are still optional and the code deals with their loss on a local level
(e.g. the decoder or filter checks for the features it needs, not
the hwcontext).
Bumping the required version essentially packs all maintenance
extensions which correct the spec rather than requiring to enable
them individually.
Vulkan requires it.
It technically also requires use_default_scaling_matrix_mask,
but we can just be explicit and give it the matrix we fill in as-non
default.
The only thing besides the hwaccel that this function uses from
AVCodecHWConfigInternal is the pixel format, which should always match
the hwaccel one.
Will be useful in following commits.
A non-limiting stream could mistakenly end up being the queue head,
which would then produce incorrect synchronization, seen e.g. in
fate-matroska-flac-extradata-update for certain number of frame threads
(e.g. 5).
Found-By: James Almer
Checking whether the user requested an unsupported conversion between
text and bitmap subtitles can be done immediately when creating the
output stream.
This function is entangled with encoder setup, so it is more encoding
code rather than ffmpeg_hw code. This will allow making more encoder
state private in the future.
This function is entangled with decoder setup, so it is more decoding
code rather than ffmpeg_hw code. This will allow making more decoder
state private in the future.
As the comment in the code mentions, EAGAIN is not an expected value here
because we call avcodec_receive_frame() until all frames have been returned.
avcodec_send_packet() returning EAGAIN means a packet is still buffered, which
hints that the underlying decoder is buggy and not fetching packets as it
should.
An example of this behavior was in the libdav1d wrapper before f209614290,
where feeding it split frames (or individual OBUs) would result in the CLI
eventually printing the confusing "Error submitting packet to decoder: Resource
temporarily unavailable" error message, and just keep going until EOF without
returning new frames.
Signed-off-by: James Almer <jamrial@gmail.com>
This patch supports the use of the "checkasm --bench" testing feature
on loongarch platform.
Change-Id: I42790388d057c9ade0dfa38a19d9c1fd44ca0bc3
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Intel MediaSDK and oneVPL expect continuous allocation for data[i],
however there are mandatory padding bytes between data[i] and data[i+1].
when calling av_frame_get_buffer. This patch removes all extra padding
bytes.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The data copy is unnecessary for packed formats when frame width and
height are aligned
For example:
$ ffmpeg -f lavfi -i testsrc=size=1920x1088 -vf "format=yuyv422" -c:v hevc_qsv -f null -
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The mfx implementation based on D3D11 is expected for an internal
session on Windows, however sometimes this implemntation is not
supported [1]. A fallback to the default mfx implementation is added in
this patch.
[1] https://github.com/intel/cartwheel-ffmpeg/issues/246
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
mix->timestamps is expressed relative to the source timebase, which is
possibly a different timescale from `base_pts`. We can't mix-and-match
here. The only reason this worked in my previous testing was because I
was testing on a source file which had an exactly matching timebase.
Fix it by always using the exact PTS as tagged on the AVFrame.
Fixes decoding packets containing split temporal units, as generated for example
by the av1_frame_split bsf.
Signed-off-by: James Almer <jamrial@gmail.com>
When no drawing is to be performed, tpad can work fine with
hardware frames, so advertise this in the query_formats
callback and ensure the drawing context is never initialised
when just cloning frames.
Reviewed-by: Thilo Borgmann <thilo.borgmann@mail.de>
Reviewed-by: Niklas Haas <git@haasn.dev>
It currently emulates the long-removed
avcodec_decode_audio4/avcodec_decode_video2 APIs, which obfuscates the
actual decoding flow. Restructure the decoding calls so that they
naturally follow the new avcodec_send_packet()/avcodec_receive_frame()
design.
This is not only significantly easier to read, but also shorter.
It is currently handled in the same loop as audio and video, but this
obscures the actual flow, because only one iteration is ever performed
for subtitles.
Also, avoid a pointless packet reference.
process_input_packet() contains two non-interacting pieces of nontrivial
size and complexity - decoding and streamcopy. Separating them makes the
code easier to read.
New placement requires fewer explicit conditions and is easier to
understand.
The logic should be exactly equivalent, since this is the only place
where eof_reached is set for decoding.
Passing ist=NULL is currently used to identify stream types that do not
decode into AVFrames, i.e. subtitles. That is highly non-obvious -
always pass a non-NULL InputStream and just check the type explicitly.
It tracks whether the decoder for this stream ever produced any frames
and its only use is for checking whether a filter input ever received a
frame - those that did not are prioritized by the scheduler.
This is awkward and unnecessarily complicated - checking whether the
filtergraph input format is valid works just as well and does not
require maintaining an extra variable.
In case no decoder is available, dec_open() called from ist_use() will
fail with 'Decoding requested, but no decoder found', so this check is
redundant.
When a filtergraph input receives EOF but never saw any input frames, we
use the fallback parameters. Currently an attempt to actually configure
the filtergraph will happen elsewhere, but there is no reason to
postpone this.
With complex filtergraphs it can happen that the filtergraph is
unconfigured because some other filter than the one we just got EOF on
is missing parameters.
Make sure that the fallback parametes for a given input are only used
when that input is unconfigured.
This algorithm has once again been refactored, this time leading to a
dropping of the old `tone_mapping_mode` field, to be replaced by a
single tunable hybrid mode with configurable strength.
We can approximately map the old modes onto the new API for backwards
compatibility. Replace deprecated enums by their integer equivalents to
safely preserve this API until the next bump.
Upstream deprecated the old ad-hoc, enum/intent-based gamut mapping API
and added a new API based on colorimetrically accurate gamut mapping
functions.
The relevant change for us is the addition of several new modes, as well
as deprecation of the old options. Update the documentation accordingly.
The current code relied on pl_queue eventually returning EOF back to the
caller, which didn't work in all situations (e.g. single frame input).
Also, the current code assumed that ff_inlink_acknowledge_status only
fired once, which was patently not true, as the above edge cases
demonstrated.
Solve both issues by keeping track of the acknowledged link status and
forwarding it (instead of trying to probe the pl_queue again) in the
event that we run out of queued input frames, as well as (in CFR mode)
when we pass the indicated status PTS.
Fixes: signed integer overflow: -159584 * 5105950 cannot be represented in type 'int'
Fixes: 55165/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BONK_fuzzer-5796023719297024
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should be a few nano seconds faster (not measureable)
But Collectively the whole humankind watching hls will safe a minute
Found-by: Leo Izen
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
As this is an AV_CODEC_CAP_OTHER_THREADS decoder, threading is handled by the
underlying library. In this case, the frame delay is calculated by libdav1d
based on the values from avctx->thread_count and the private max_frame_delay
option.
Export said delay reported by the library in AVCodecContext.delay
Reviewed-by: Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
When using low-latency mode, it eliminates frame reordering
and follows a one-in-one-out encoding mode
Signed-off-by: xufuji456 <839789740@qq.com>
Signed-off-by: Rick Kern <kernrj@gmail.com>
Use the next I/P/B or start code as the end of current frame.
Before the patch, extension start code, user data start code,
sequence end code and so on are treated as the start of next
frame.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The demuxer exports rawvideo, so there's no reason for the muxer to only
work with wrapped_avframe.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Not only this is information that relies on the concept of a sequence of
frames, which is completely out of place as a field in AVFrame, but there are
no known or intended uses of this field.
Signed-off-by: James Almer <jamrial@gmail.com>
Accept it and pass it through unchanged.
The standard requires that decoders ignore unknown metadata, and indeed
this is tested by some of the Argon coverage streams.
* take num_ticks_per_picture_minus_1 into account, since that is a part
of the framerate computation
* stop exporting num_ticks_per_picture_minus_1 into
AVCodecContext.ticks_per_frame, as that field is used for other
purposes (in conjunction with repeat_pict, which is not used at all by
av1)
It does no initialization anymore, except for setting
transcode_init_done - the bulk of the function is printing the
input/output maps. It also cannot fail anymore, so remove the useless
return value.
Export the corresponding flag in InputFile instead. This will allow
making the demuxer AVFormatContext private in future commits, similarly
to what was previously done for muxers.
There is no point in having a per-stream wallclock start time, since
they are all computed at the same instant. Keep a per-file start time
instead, initialized when the demuxer thread starts.
That is a more appropriate place for this code and will allow hiding
more of InputStream.
The value of repeat_pict extracted from libavformat internal parser no
longer needs to be trasmitted outside of the demuxing thread.
Move readrate handling to the demuxer thread. This has to be done in the
same commit, since it reads InputStream.dts,nb_packets, which are now
set in the demuxer thread.
This way computing it and using it for streamcopy does not need to
happen in sync. Will be useful in following commits, where updating
InputStream.dts will be moved to the demuxing thread.
This code runs post-demuxing and is not synchronized with the decoder
output (which may be delayed with respect to its input by arbitrary and
unknowable amounts), so accessing any decoder properties is incorrect.
Move them to a separate function called right after timestamp
discontinuity processing. This is now possible, since these values have
no interaction with decoding anymore.
For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
Since this is an external encoder not under our control, we cannot test
the encoded output exactly as is done for internal encoders. We can
still test however that the output is decodable and produces the
expected number of frames with expected dimensions, pixel formats, and
timestamps.
H.264 and mpeg12 parsers need to be adjusted at the same time to stop
using the value of AVCodecContext.ticks_per_frame, because it is not set
correctly unless the codec has been opened. Previously this would result
in both the parser and lavf seeing the same incorrect value, which would
cancel out.
Updating lavf and not the parsers would result in correct value in lavf,
but the wrong one in parsers, which would break some tests.
Decoders will currently warn if an audio decoder not marked with
AV_CODEC_CAP_SUBFRAMES consumes less than the whole packet, but
* this happens for regular files
* this has no negative consequences
* there is no meeaningful action that can or should be taken in response
The warning is thus useless noise.
This should fix the regression since 6b1f68ccb0
Should fix Ticket10353 (please test and report cases that still fail)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This exposes libplacebo's frame mixing functionality to vf_libplacebo,
by allowing users to specify a desired target fps to output at. Incoming
frames will be smoothly resampled (in a manner determined by the
`frame_mixer` option, to be added in the next commit).
To generate a consistently timed output stream, we directly use the
desired framerate as the timebase, and simply output frames in
sequential order (tracked by the number of frames output so far).
To present compatibility with the current behavior, we keep track of a
FIFO of exact frame timestamps that we want to output to the user. In
practice, this is essentially equivalent to the current filter_frame()
code, but this design allows us to scale to more complicated use cases
in the future - for example, insertion of intermediate frames
(deinterlacing, frame doubling, conversion to fixed fps, ...)
This does not leverage any immediate benefits, but refactors and
prepares the codebase for upcoming changes, which will include the
ability to do deinterlacing and resampling (frame mixing).
This commit contains no functional change. The goal is merely to
separate the highly intertwined `filter_frame` and `process_frames`
functions into their separate concerns, specifically to separate frame
uploading (which is now done directly in `filter_frame`) from emitting a
frame (which is now done by a dedicated function `output_frame`).
The overall idea here is to be able to ultimately call `output_frame`
multiple times, to e.g. emit several output frames for a single input
frame.
For example
ffmpeg -f lavfi -i sine -af "aformat=cl=stereo|5.1|7.1,lowpass,aformat=cl=7.1|5.1|stereo" -f null -
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Before this commit if allocation would fail in ff_add_channel_layout()
function, function would return negative error code and this would
cause wrong format pick up later. If allocation would not fail return
code would be 0 and then format negotiation would simply fail as code
would break from the loop but with wrong return code.
Error was introduced in 6aaac24d72 commit.
Fixes#6638
This is not public API, no it has no need for an alloc() and free()
functions. The struct can reside on stack.
Signed-off-by: James Almer <jamrial@gmail.com>
Move the AVPacketQueue functionality that is currently only used
for the decklink decode module into decklink_common, so it can
be shared by the decklink encoder (i.e. for VANC insertion when
we receive data packets separate from video).
The threadsafe queue used within the decklink module was named
"AVPacketQueue" which implies that it is part of the public API,
which it is not.
Rename the functions and the name of the queue struct to make
clear it is used exclusively by decklink, per Marton Balint's
suggestion.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This patch simply recognizes the AAC audio track during
decode -- it does not add functionality to encode AAC in
MXF.
Signed-off-by: Ammon Riley <ammon.riley@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Unlike other cases where the closed captions are embedded in the
video stream as MPEG-2 userdata or H.264 SEI data, with MOV files
the captions are often found on a separate "e608" subtitle track.
Add support for playout of such files, leveraging the new ccfifo
mechanism to ensure that they are embedded into VANC at the correct
rate (since e608 packets often contain batches of multiple 608 pairs).
Note this patch includes a new file named libavdevice/ccfifo.c, which
allows the ccfifo functionality in libavfilter to be reused even if
doing shared builds. This is the same approach used for log2_tab.c.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
THis filter can correct certain issues seen from upstream sources
where the cc_count is not properly set or the CEA-608 tuples are
not at the start of the payload as expected.
Make use of the ccfifo to extract and immediately repack the CEA-708
side data, thereby removing any extra padding and ensuring the 608
tuples are at the front of the payload.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Because the interlacing filter halves the effective framerate, we
need to ensure that no CEA-708 data is lost as frames are merged.
Make use of the new ccfifo mechanism to ensure that caption data
is properly preserved as frames pass through the filter.
Thanks to Thomas Mundt for review and noticing a couple of
missed codepaths for injection on output. Thanks to Lance Wang
for pointing out a memory leak.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Various deinterlacing modes have the effect of doubling the
framerate, and we need to ensure that the caption data isn't
duplicated (or else you get double captions on-screen).
Use the new ccfifo mechanism for yadif (and yadif_cuda and bwdif
since they use the same yadif core) so that CEA-708 data is
properly preserved through this filter.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The existing implementation made an attempt to remove duplicate
captions if increasing the framerate, but made no attempt to
handle reducing the framerate, nor did it rewrite the caption
payloads to have the appropriate cc_count (e.g. the cc_count needs
to change from 20 to 10 when going from 1080i59 to 720p59 and
vice-versa).
Make use of the new ccfifo mechanism to ensure that caption data
is properly preserved.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
When transcoding video that contains 708 closed captions, the
caption data is tied to the frames as side data. Simply dropping
or adding frames to change the framerate will result in loss of
data, so the caption data needs to be preserved and reformatted.
For example, without this patch converting 720p59 to 1080i59
would result in loss of 50% of the caption bytes, resulting in
garbled 608 captions and 708 probably wouldn't render at all.
Further, the frames that are there will have an illegal
cc_count for the target framerate, so some decoders may ignore
the packets entirely.
Extract the 608 and 708 tuples and insert them onto queues. Then
after dropping/adding frames, re-write the tuples back into the
resulting frames at the appropriate rate given the target
framerate. This includes both having the correct cc_count as
well as clocking out the 608 pairs at the appropriate rate.
Thanks to Lance Wang <lance.lmwang@gmail.com>, Anton
Khirnov <anton@khirnov.net>, and Michael Niedermayer <michael@niedermayer.cc>
for providing review/feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Currently, the -1 (MR) preset is disallowed as it's taken as the preset
option not set, and the only way to access it was through svtav1-params.
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Commit 55b81528a9 ("doc/filters: itemize crop examples") dropped the
quotation marks from these examples, but this one remained. Quotes are
actually needed to put the example into a command line or a program, but
removing it here makes the example consistent with the document.
The two checks using eof_reached are testing whether more input can
possibly appear on this filtergraph input. InputFilterPriv.eof is the
more authoritative source for this information.
When an input stream terminates and no frames were successfully decoded,
filtering code will currently configure the filtergraph using demuxer
stream parameters. Use decoder parameters instead, which should be more
reliable. Also, initialize them immediately when an input stream is
bound to a filtergraph input, so that these parameters are always
available (if at all) and filtering code does not need to reach into the
decoder at some arbitrary later point.
When no frames are ever seen by an encoder, encoder flush will do a
last-ditch attempt to configure its source filtergraph in order to at
least get the stream parameters. This involves extracting demuxer
parameters from filtergraph source inputs, which is
* a bad layering violation
* probably unreachable, because decoders are flushed before encoders,
which should call ifilter_send_eof(), which will also set these
parameters; however due to complex control flow it is hard to be
entirely sure this code can never be triggered
Even if this code can actually be reached, it is probably better to
return an error as the comment above it says.
These two functions are a part of a single logical action - determining
which, if any, output stream needs to be processed next. Keeping them
separate is a historical artifact that obscures what is actually being
done.
Fixes: runtime error: signed integer overflow: 2140143616 + 254665816 cannot be represented in type 'int'
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ADPCM_XMD_fuzzer-6690181676924928
As a sideeffect this simplifies the equation, the high bits are different after this but only
the low 16bits are stored and used in later steps.
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -2147375930 + -133875 cannot be represented in type 'int'
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WADY_DPCM_fuzzer-6703727013920768
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: index 4294967295 out of bounds for type 'uint16_t [65536]'
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-5950405086674944
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-6666195176914944
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 2147483372 - -148624 cannot be represented in type 'int'
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SONIC_fuzzer-5477177805373440
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SONIC_fuzzer-6681622236233728
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_IFF_ILBM_fuzzer-5124452659888128
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_IFF_ILBM_fuzzer-6362836707442688
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 3011809745540902265 + 6323452730883571725 cannot be represented in type 'long'
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FLAC_fuzzer-6687553022722048
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The global header should not contain a frame, and decoding it
would result in leaks
Fixes: memleak
Fixes: 45982/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APNG_fuzzer-6603443149340672
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Its unexpected that a .avi or other "standard" file turns into a playlist.
The goal of this patch is to avoid this unexpected behavior and possible
privacy or security differences.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When tak_get_nb_samples() fails, it will currently write
AVERROR_INVALIDDATA as TAKStreamInfo.frame_samples. The parser will then
use this negative value as a frame duration, which leads to various
breakage.
Avoid this by returning the error code from tak_parse_streaminfo()
directly; never store negative values in the parsed header.
Motivated by a desire to use vf_libplacebo as a GPU-accelerated
cropping/padding/zooming filter. This commit adds support for setting
the `input/target.crop` fields as dynamic expressions.
Re-use the same generic variables available to other scale and crop type
filters, and also add some more that we can afford as a result of being
able to set these properties dynamically.
It's worth pointing out that `out_t/ot` is currently redundant with
`in_t/t` since it will always contain the same PTS values, but I plan on
changing this in the near future.
I decided to also expose `crop_w/crop_h` and `pos_w/pos_h` as variables
in the expression parser itself, since this enables the fairly common
use case of determining dimensions first and then placing the image
appropriately, such as is done in the default behavior (which centers
the cropped/placed region by default).
In some circumstances, libplacebo will clear the background as a result
of cropping/padding. Currently, this uses the hard-coded default fill
color of black. This option makes this behavior configurable.
As with the earlier bswap change, all versions of GCC and Clang that
support RISC-V support the popcount built-ins, so we can just use them
instead of inline assembler.
av_bswapXX() are used in context that expect exact size types, notably
variable arguments to av_log(). On Linux RV64, uint_fast32_t is an
unsigned long, so the current inline assembler does not work properly.
Since GCC and Clang gained their byte-swap built-ins before they
supported RISC-V, we can simply defer to them. As an added bonus, the
compiler can do instruction scheduling, which it couldn't with the Zbb
inline assembler.
Currently those are set in different ways depending on whether the
stream is decoded or not, using some values from the decoder if it is.
This is wrong, because there may be arbitrary amount of delay between
input packets and output frames (depending e.g. on the thread count when
frame threading is used).
Always use the path that was previously used only for streamcopy. This
should not cause any issues, because these values are now used only for
streamcopy and discontinuity handling.
This change will allow to decouple discontinuity processing from
decoding and move it to ffmpeg_demux. It also makes the code simpler.
Changes output in fate-cover-art-aiff-id3v2-remux and
fate-cover-art-mp3-id3v2-remux, where attached pictures are now written
in the correct order. This happens because InputStream.dts is no longer
reset to AV_NOPTS_VALUE after decoding, so streamcopy actually sees
valid dts values.
This was added in 380db56928 as a
temporary crutch that is not needed anymore. The only case where this
code can be triggered is the very first frame, for which InputStream.pts
is always equal to 0.
Stop using InputStream.dts for generating missing timestamps for decoded
frames, because it contains pre-decoding timestamps and there may be
arbitrary amount of delay between input packets and output frames (e.g.
dependent on the thread count when frame threading is used). It is also
in AV_TIME_BASE (i.e. microseconds), which may introduce unnecessary
rounding issues.
New code maintains a timebase that is the inverse of the LCM of all the
samplerates seen so far, and thus can accurately represent every audio
sample. This timebase is used to generate missing timestamps after
decoding.
Changes the result of the following FATE tests
* pcm_dvd-16-5.1-96000
* lavf-smjpeg
* adpcm-ima-smjpeg
In all of these the timestamps now better correspond to actual frame
durations.
If input packets have timestamps, they will be propagated to output
frames by the decoder, so at best this block does not do anything.
There can also be an arbitrary amount of delay between packets sent to
the decoder and decoded frames (e.g. due to decoder's intrinsic delay or
frame threading), so deriving any timestamps from packet properties is
wrong.
One that is fine enough to represent all DV audio sample rates. Audio
packet durations are now sample-accurate.
This largely undoes commit 76fbb0052d. To
avoid breaking the issue fixed by that commit, resync audio timestamps
against video if they get more than one frame apart. The sample from
issue #8762 still works correctly after this commit.
Slightly changes the results of the lavf-dv seektest, due to the audio
timebase being more granular.
Current code will call avpriv_set_pts_info() for each video frame,
possibly setting a different timebase if the stream framerate changes.
This violates API conventions, as the timebase is supposed to stay
constant after stream creation.
Change the demuxer to set a single timebase that is fine enough to
handle all supported DV framerates.
The seek tests change slightly because the new timebase is more
granular.
This makes the worst case much faster
Fixes: Timeout
Fixes: 51363/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BONK_fuzzer-5660734784143360
Fixes: 57957/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BONK_fuzzer-5874095467397120
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This allows the usage of codecs in builds that have a parser but no decoders
for remuxing scenarios with raw sources.
Signed-off-by: James Almer <jamrial@gmail.com>
Also remove the _minus8 part of the name to be in line with the rest of the
decoder, and fix the storage type for pps_palette_predictor_initializer,
to support hbd values.
Signed-off-by: James Almer <jamrial@gmail.com>
Will remove native backend, so change the default backend in filters,
and also remove the python scripts which generate native model file.
Signed-off-by: Ting Fu <ting.fu@intel.com>
Native backend will be removed in following commits, so change the
dnn interface and modify the error message in it first.
Signed-off-by: Ting Fu <ting.fu@intel.com>
Not doing so is an obvious oversight - the ICC profile is tied to the
original colorspace, so if we change it, we should definitely strip this
information.
We should probably also have an extra option to control whether the ICC
profile should be stripped, ignored, or applied, but for now this fixes
an existing bug.
Some testing revealed this to be a very efficient and reliable method of
ingesting GPU frames into libplacebo, so it's a good idea to give as an
example.
This example being first is now misleading because round-tripping
through hwdownload/hwupload is neither required nor recommended. Also,
the comment about avoiding format conversion is unnecessary because
`libplacebo` will now inherit the input frame format by default.
This was a bug/mistake in dae3679a9b.
use_mfra_for by defintion only has an effect on fragmented MP4 files,
making the check not only redundant, but also broken if a user used
the option globally (i.e. set on non-fragmented MP4s).
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Also make duration check for mvhd more consistent with the others, write
version 1 of mvhd if duration is at least INT32_MAX instead of UINT32_MAX.
Signed-off-by: Marton Balint <cus@passwd.hu>
Commit 23eeffcd48 added a hack to support invalid
files where the creation date was encoded as a classic unix timestamp. Let's
reduce the scope of the hack by only applying it to version 0 mdhd/mvhd atoms.
Also warn the user of such possibly broken files.
Signed-off-by: Marton Balint <cus@passwd.hu>
Support pixel formats 0x11412100, 0x11311100, and 0x41211100, and add
logic to perform 4x horizontal upsampling. This should fix various JPEG
files found in Ticket #8930.
Co-authored-by: <leo.izen@gmail.com>
The previous name is misleading, because the function does not actually
initialize any filters - it creates a new output stream and binds a
filtergraph output to it.
Their only function is checking that encoding was not specified for
data/unknown-type streams, but the check is broken because enc_ctx will
not be created in ost_add() unless a valid encoder can be found.
Add an actually working check for all types for which encoding is not
supported in choose_encoder().
ts_discontinuity_detect() is applied right after demuxing, while
InputStream.pts is a post-decoding timestamp, which may be delayed with
respect to demuxing by an arbitrary amount (e.g. depending on the thread
count when frame threading is used).
The name is misleading, because it is not a picture in the sense of MPEG
terminology (which define "picture" as "frame or field"), but always a
full frame. 'next' is also redundant and/or misleading, because it is
the _current_ frame to be encoded.
Previously they would only be used with trivial filtergraphs, because
filters did not handle frame durations. That is no longer true - most
filters process frame durations properly (there may still be some that
don't - this change will help finding and fixing them).
Improves output video frame durations in a number of FATE tests.
When an encoder exports sum-of-squared-differences information in
encoded packets, print_report() will print PSNR information in the
status line. However,
* the code computing PSNR assumes 8bit 420 video and prints incorrect
values otherwise; there are no issues on trac about this
* only a few encoders (namely aom, vpx, mpegvideo, snow) export this
information; other often-used encoders such as libx26[45] do not
export this, even though they could
This suggests that this feature is not useful and it is better to remove
it rather than spend effort on fixing it.
Otherwise main and overlay videos share the same input region. Note NULL
pointer imples the whole overlay video will be processed.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
- qsv_internal.h: Remove unnecessary include va_drm.h
- qsv_internal.h: Enable AVCODEC_QSV_LINUX_SESSION_HANDLE on Linux/VA only
- hwcontext_qsv.c: Do not allow child_device_type VAAPI for Windows until
support is added, keep D3D11/DXVA2 as more prioritary defaults.
Initial review at https://github.com/intel-media-ci/ffmpeg/pull/619/
Signed-off-by: Sil Vilerino <sivileri@microsoft.com>
Reviewed-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Wu, Tong1 <tong1.wu@intel.com>
When write multi-trun box, the MOV_TRUN_FIRST_SAMPLE_FLAGS flag
need judge by first param, not 0.
If the original video contains consecutive I frames,
this will cause the packets of fmp4 have error sample_flags ,
and then incorrect keyframes were generated,
and then error packet will be seeked.
Signed-off-by: Wang Yaqiang <wangyaqiang03@kuaishou.com>
Signed-off-by: Steven Liu <liuqi05@chinaffmpeg.org>
Adds JPEG 2000 decoder tests using materials from the conformance suite specified in
Rec. ITU-T T.803 | ISO/IEC 15444-4.
The test materials are available at https://gitlab.com/wg1/htj2k-codestreams
Signed-off-by: Pierre-Anthony Lemieux <pal@palemieux.com>
framebuf is only allocated when the new width/height are larger than the old
but nothing sets the old so its always allocated.
Use av_fast_mallocz() instead.
Fixes: Timeout
Fixes: 55094/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_G2M_fuzzer-5116909932904448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 100183269 - -2132769113 cannot be represented in type 'int'
Fixes: 55063/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AAC_FIXED_fuzzer-5039294027005952
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
num_ref_idx_l0_active_minus1, num_ref_idx_l1_active_minus1,
num_ref_idx_l0_default_active_minus1, and num_ref_idx_l1_default_active_minus1
are all in the range 0 to 14, inclusive.
Signed-off-by: James Almer <jamrial@gmail.com>
Support full range videos when transcoding, enabled the
YUVJ420P to avoid auto scale from YUVJ420P to YUV420P
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
The change introduced in b18a9c2971
created a regression for non-subsampled progressive RGB jpegs. This
should fix that.
Additionally, this should fix other RGB JPEGs broken before the recent
patches, such as those in Trac issue #10190.
When enable lcms2, the fate-png-icc-parse will get error bellow.
TEST png-icc-parse
This because updated how PNG handles colors (no
longer using mastering display metadata for that).
Reviewed-by: Leo Izen <leo.izen@gmail.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
The decoder is tagged as being FF_CODEC_CAP_SKIP_FRAME_FILL_PARAM, so might as
well make use of it.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Also remove the _plus* and _minus* parts of some of these to be in line with
other similar fields in the decoder.
Signed-off-by: James Almer <jamrial@gmail.com>
The spec says: "The value of num_ref_loc_offsets shall be in the range of 0 to
vps_max_layers_minus1, inclusive".
Signed-off-by: James Almer <jamrial@gmail.com>
Remove now-obsolete code setting packet durations pre-muxing for CFR
encoded video.
Changes output in the following FATE tests:
* numerous adpcm tests
* ffmpeg-filter_complex_audio
* lavf-asf
* lavf-mkv
* lavf-mkv_attachment
* matroska-encoding-delay
All of these change due to the fact that the output duration is now
the actual input data duration and does not include padding added by
the encoder.
* apng-osample: less wrong packet durations are now passed to the muxer.
They are not entirely correct, because the first frame duration should
be 3 rather than 2. This is caused by the vsync code and should be
addressed later, but this change is a step in the right direction.
* tscc2-mov: last output frame has a duration of 11 rather than 1 - this
corresponds to the duration actually returned by the demuxer.
* film-cvid: video frame durations are now 2 rather than 1 - this
corresponds to durations actually returned by the demuxer and matches
the timestamps.
* mpeg2-ticket6677: durations of some video frames are now 2 rather than
1 - this matches the timestamps.
A single smvjpeg packet decodes into one large mjpeg frame, slices of
which are then returned as output frames. Packet duration covers all of
these slices.
Current code prefers deprecated AVFrame.pkt_duration over its
replacement AVFrame.duration whenever the former is set and not equal to
the latter. However, duration will only be actually used when the
caller sets the AV_CODEC_FLAG_FRAME_DURATION flag, which was added
_after_ AVFrame.duration.
This implies that any caller aware of AV_CODEC_FLAG_FRAME_DURATION is
also aware of AVFrame.duration. pkt_duration should then never be used.
Commit b18a9c2971 introduced a regression
that broke some baseline RGB jpegs. (See Trac issue #4045). This fixes
that.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
That field was added to store timestamp conversion state for audio
decoding code. Later it started being used by streamcopy as well, but
that use is wrong because, for a given input stream, both decoding and
an arbitrary number of streamcopies may be performed simultaneously.
They would then all overwrite the same state variable.
Store this state in MuxStream instead.
This is the last use of InputStream in of_streamcopy(), so the ist
parameter can now be removed.
It stores codec parameters of the stream submitted to the muxer, which
may be different from the codec parameters in AVStream due to bitstream
filtering.
This avoids the confusing back and forth synchronisation between the
encoder, bitstream filters, and the muxer, now information flows only in
one direction. It also reduces the need for non-muxing code to access
AVStream.
Reduces access to a deeply nested muxer property
OutputStream.st->codecpar->codec_type for this fundamental and immutable
stream property.
Besides making the code shorter, this will allow making the AVStream
(OutputStream.st) private to the muxer in the future.
Set InputStream.decoding_needed/discard/etc. only from
ist_{filter,output},add() functions. Reduces the knowledge of
InputStream internals in muxing/filtering code.
init_input_stream() can print log messages directly, there is no need to
ship them to the caller.
Also, log errors to the InputStream and avoid duplicate information in
the message.
Changing AVCodecContext.sample_aspect_ratio after the encoder was opened
is by itself questionable, but if anywhere it belongs in encoding rather
than filtering code.
Creating a new output stream of a given type is currently done by
calling new_<type>_stream(), which all start by calling
new_output_stream() to allocate the stream and do common init, followed
by type-specific init.
Reverse this structure - the caller now calls the common function
ost_add() with the type as a parameter, which then calls the
type-specific function internally. This will allow adding common code
that runs after type-specific code in future commits.
Add the check for the return value of the av_malloc in order to avoid
NULL pointer deference.
Fixes: e4be3485af ("MS Video 1 encoder")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Add the check for the return value of the av_malloc in order to avoid
NULL pointer deference.
Fixes: b86ab38137 ("Add weighted motion compensation for RV40 B-frames")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Fixes: out of array write on x86-32
Fixes: 57825/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEG2VIDEO_fuzzer-6094366187061248
Fixes: 57829/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPEG2VIDEO_fuzzer-4526419991724032
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
This reverts commit f7abe92bd7.
timer.h has been removed from internal.h, and then added back with
3e6088f for convenience. This patch removed it again for the
following reasons:
1. Only includes what's necessary is a common and safe strategy.
2. It fixed some build errors on Android:
a. libavutil/timer.h includes sys/ioctl.h, and ioctl.h includes
termios.h on Android.
b. termios.h reserves names prefixed with ‘c_’, ‘V’, ‘I’, ‘O’, and
‘TC’; and names prefixed with ‘B’ followed by a digit.
c. libavcodec uses B0 B1 and so on as variable names a lot. So
the code failed to build with --enable-linux-perf, or
--target-os=Linux.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
In most cases this should only occur once or so per stream in an
input, and in case the logic ends up in an eternal loop, it should
be visible to the end user instead of being completely invisible.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
When no packet dts values are available from the container, video
decoding code will currently use its own guessed values, which will then
be propagated to pkt_dts on decoded frames and used as pts in certain
cases. This is inaccurate, fragile, and unnecessarily convoluted.
Simply removing this allows the extrapolation code introduced in the
previous commit to do a better job.
Changes the results of numerous h264 and hevc FATE tests, where no
spurious timestamp gaps are generated anymore. Several tests no longer
need -vsync passthrough.
When no timestamps are available from the container, the video decoding
code will currently use fake dts values - generated in
process_input_packet() based on a combination of information from the
decoder and the parser (obtained via the demuxer) - to generate
timestamps during decoder flushing. This is fragile, hard to follow, and
unnecessarily convoluted, since more reliable information can be
obtained directly from post-decoding values.
The new code keeps track of the last decoded frame pts and estimates its
duration based on a number of heuristics. Timestamps generated when both
pts and pkt_dts are missing are then simple pts+duration of the last frame.
The heuristics are somewhat complicated by the fact that lavf insists on
making up packet timestamps based on its highly incomplete information.
That should be removed in the future, allowing to further simplify this
code.
The results of the following tests change:
* h264-3386 now requires -fps_mode passthrough to avoid dropping frames
at the end; this is a pathology of the interaction of the new and old
code, and the fact that the sample switches from field to frame coding
in the last packet, and will be fixed in following commits
* hevc-conformance-DELTAQP_A_BRCM_4 stops inventing an arbitrary
timestamp gap at the end
* hevc-small422chroma - the single frame output by this test now has a
timestamp of 0, rather than an arbitrary 7
Changes the result of the h264_redundant_pps-mov test, where the output
timebase is now 1001/24000 instead of 1/24. This is more correct, as the
source file actually is 23.98fps.
Timestamps in two FATE H.264 conformance tests now start at 1 instead
of 0, which also happens in some other H.264 tests before this commit
and so is not a big issue.
Conversely, timestamps in some HEVC conformance tests start from a
smaller value now.
Ideally this should be addressed later in a more general way.
h264-conformance-frext-frext2_panasonic_b no longer requires -vsync
passthrough.
This field contains different values depending on whether the stream is
being decoded or not. When it is, InputStream.pts is set to the
timestamp of the last decoded frame. Otherwise, it is made equal to
InputStream.dts.
Since a given InputStream can be at the same time decoded and
streamcopied to any number of output streams, this use is incorrect, as
decoded frame timestamps can be delayed with respect to input packets by
an arbitrary amount (e.g. depending on the thread count when frame
threading is used).
Replace all uses of InputStream.pts for streamcopy with InputStream.dts,
which is its value when decoding is not performed. Stop setting
InputStream.pts for pure streamcopy.
Also, pass InputStream.dts as a parameter to do_streamcopy(), which
will allow that function to be decoupled from InputStream completely in
the future.
Which is subtitle encoding. Also, check for AVSubtitle.pts rather than
InputStream.pts, since that is the more authoritative value and is
guaranteed to be valid.
That function only contains two checks now - whether the muxer returned
EOF and whether the packet timestamp is before requested output start
time.
The first check is unnecessary, since the packet will just be rejected
by the muxer. The second check is better combined with a related check
directly in do_streamcopy().
Currently, output streams where an input stream is sent directly (i.e.
not through lavfi) are determined by iterating over ALL the output
streams and skipping the irrelevant ones. This is awkward and
inefficient.
The channel layout is set before opening the encoder, in enc_open().
Messing with it in configure_output_audio_filter() cannot accomplish
anything meaningful.
This option adds a long string of numbers to the progress line, where
i-th number contains the base-2 logarithm of the number of times a frame
with this QP value was seen by print_report().
There are multiple problems with this feature:
* despite this existing since 2005, web search shows no indication
that it was ever useful for any meaningful purpose;
* the format of what is printed is entirely undocumented, one has to
find it out from the source code;
* QP values above 31 are silently ignored;
* it only works with one video stream;
* as it relies on global state, it is in conflict with ongoing
architectural changes.
It then seems that the nontrivial cost of maintaining this option is not
worth its negligible (or possibly negative - since it pollutes the
already large option space) value.
Users who really need similar functionality can also implement it
themselves using -vstats.
Current code in print_final_stats(), printing the final summary such as
video:8851kB audio:548kB subtitle:0kB other streams:0kB global headers:20kB muxing overhead: 0.559521%
was written with a single output file in mind and makes very little
sense otherwise.
Print this information in mux_final_stats() instead, one line per output
file. Use the correct filesize, if available.
This is currently done in two places:
* at the end of print_final_stats(), which merely prints a warning if
the total size of all written packets is zero
* at the end of transcode() (under a misleading historical 'close each
encoder' comment), which instead checks the packet count to implement
-abort_on empty_output[_stream]
Consolidate both of these blocks into a single function called from
of_write_trailer(), which is a more appropriate place for this. Also,
return an error code rather than exit immediately, which ensures all
output files are properly closed.
Properly pass muxing return codes through the call stack instead.
Slightly changes behavior in case of errors:
* the output IO stream is closed even if writing the trailer returns an
error, which should be more correct
* all files get properly closed with -xerror, even if one of them fails
It is video encoding-only and does not need to be visible outside of
ffmpeg_enc.c
Also, rename the variable to frames_prev_hist to be consistent with
the naming in do_video_out().
This allows weird subsampling with progressive JPEGs to be decoded,
such as full-RG and only B subsampled.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Drop unneeded ctype.h and math.h.
Group all system headers together.
Sort unconditional includes alphabetically.
Group local includes by the library, sort alphabetically.
Several places in the code currently call init_output_stream_wrapper(),
which in turn calls init_output_stream(), which then calls either
enc_open() or init_output_stream_streamcopy(), followed by
of_stream_init(), which tells the muxer the stream is ready for muxing.
All except one of these callers are in the encoding code, which will be
moved to ffmpeg_enc.c. Keeping this structure would then necessitate
ffmpeg_enc.c calling back into the common code in ffmpeg.c, which would
then just call ffmpeg_mux, thus making the already convoluted call chain
even more so.
Simplify the situation by using separate paths for filter-fed output
streams (audio and video encoders) and others (subtitles, streamcopy,
data, attachments).
Encoder initialization is currently split rather arbitrarily between
init_output_stream_encode() and init_output_stream(). Move all of it to
init_output_stream_encode().
The code currently uses lavfi for this, which creates a sort of
configuration dependency loop - the encoder should be ideally
initialized with information from the first audio frame, but to get this
frame one needs to first open the encoder to know the frame size. This
necessitates an awkward workaround, which causes audio handling to be
different from video.
With this change, audio encoder initialization is congruent with video.
For audio AVFrames, nb_samples is typically more trustworthy than
duration. Since sync queues look at durations, make sure they match the
sample count.
The last audio frame in the fate-shortest test is now gone. This is more
correct, since it outlasts the last video frame.
stride value is not relevant with unpadded content and the total count
of pixels (width x height) must be used instead of the rounding based on
width only then multiplied by height
unpadded_10bit value computing is moved sooner in the code in order to
be able to use it during computing of minimal content size. Also make sure to
only set it for 10bit.
Fix 'Overread buffer' error when the content is not lucky enough to have
(enough) padding bytes at the end for not being rejected by the formula
based on the stride value
Fixes ticket #10259.
Signed-off-by: Jerome Martinez <jerome@mediaarea.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
Extend the decklink output to include support for compressed AC-3,
encapsulated using the SMPTE ST 377:2015 standard.
This functionality can be exercised by using the "copy" codec when
the input audio stream is AC-3. For example:
./ffmpeg -i ~/foo.ts -codec:a copy -f decklink 'UltraStudio Mini Monitor'
Note that the default behavior continues to be to do PCM output,
which means without specifying the copy codec a stream containing
AC-3 will be decoded and downmixed to stereo audio before output.
Thanks to Marton Balint for providing feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The Matroska spec requires it to be equal to the highest BlockAddID value in a
BlockAdditions, but being purely an informative element, only abort if strict
compliance is requested, as demuxing is otherwise unaffected.
Signed-off-by: James Almer <jamrial@gmail.com>
Implement support for including AFD in decklink output when putting
out 10-bit VANC data.
Updated to reflect feedback in 2018 from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com> and Aaron Levinson
<alevinsn_dev@levland.net>. Also includes fixes to set the AR field
based on the SAR, as well as now sending the AFD info in both fields
for interlaced formats.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
RIP, if exists is the last KLV item in the MXF files therefore we can stop
parsing the file if it is encountered. This allows us to support files created by
broken muxers such as OpenCube MXFTk Advanced 2.8.0.0.1. which dumps some extra
garbage after the RIP.
Signed-off-by: Marton Balint <cus@passwd.hu>
The function now accepts an existing buffer to avoid unnecessary allocations,
as well as only reporting the needed amount of bytes if you pass a NULL pointer
as input for data.
For this, both parameters become input and output, as well as making data
optional. This is backwards compatible, and as such not breaking any existing
use of the function in external code (if there's any).
Signed-off-by: James Almer <jamrial@gmail.com>
Current log messages talk about 'suitable' output formats. This is
confusing, because it suggests that some formats are suitable, while
others are not, which is not the case.
Also, suggest possible user actions when format cannot be guessed from a
filename.
An uninitialized AVFormatContext instance with neither iformat nor
oformat set will currently log as 'NULL', which is confusing and
unhelpful. Print 'AVFormatContext' instead, which provides more
information.
This happens e.g. if choosing an output format fails in
avformat_alloc_output_context2().
E.g. with the following commandline:
ffmpeg -i <input> -f foobar -y /dev/null
before: [NULL @ 0x5580377834c0] Requested output format 'foobar' is not a suitable output format
after: [AVFormatContext @ 0x55fa15bb34c0] Requested output format 'foobar' is not a suitable output format
When using fractional framerates (or any fraction with a numerator != 1),
DTS values for packets would be calculated incorrectly.
Signed-off-by: Kyle Manning <tt2468@irltoolkit.com>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
3GPP TS 26.244 Table 8.10 specifies that longitude is written before
latitude. The MOV demuxer already expects the correct order. So, write
them in that order.
However, the user supplied string may also be used in MOV mode which
requires ISO 6709 format which specifies latitude first. The demuxer
also exports the loci value in that format. So parser adjusted as well.
Fixes: signed integer overflow: -532410125 + -1759642300 cannot be represented in type 'int'
Fixes: 57045/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WAVARC_fuzzer-637023665297817
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When writing a subtitle SSA/ASS subtitle file, the AVCodecParameters::extradata
buffer is written directly to the output. In the case where the buffer is
filled from a matroska source file produced by some older versions of
Handbrake, this buffer ends with a null terminating character, which is then
erroneously copied into the middle of the output file. The change here avoids
this problem by treating it as a string rather than a raw buffer. This way it
is agnostic as to whether the source buffer was null terminated or not.
Fixes ticket #10203.
Reported-by: Tim Angus <tim at ngus.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
When including the header in decklink_enc.cpp it would be fed
through the C++ compiler rather than the C compiler, which has
more strict warnings when comparing signed/unsigned values.
Make the local variables unsigned to match the arguments they are
being passed for those functions.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Clarify failure in case of x/y building a too big matrix.
Example:
$ ffmpeg -hide_banner -f lavfi -i color=c=white:size=640x360,unsharp=lx=5:ly=23 -f null -t 1 -
[Parsed_unsharp_1 @ 0x5650e1c30240] luma matrix size (lx/2+ly/2)*2=26 greater than maximum value 25
color=c=white:size=640x360,unsharp=lx=5:ly=23: Invalid argument
Fix trac issue:
http://trac.ffmpeg.org/ticket/6033
In particular, add a sentence to introduce the example, and add a
simpler starting example with no options.
Also use different format for input.avi and output.mp4, to convey
that the conversion also works on the container format.
Address issue:
http://trac.ffmpeg.org/ticket/8730
Document metadata entries set by the filter, extend and clarify
options, add additional example showing how to extract the generated
data.
Address issue:
http://trac.ffmpeg.org/ticket/8766
The only encoders avaliable using mediacodec were h264 and hevc. This
patch adds the vp9 encoder.
Signed-off-by: Samuel Mira <samuel.mira@qt.io<mailto:samuel.mira@qt.io>>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Previously, the ff_configure_buffers_for_index function had
upper sanity limits of 16 MB (1<<24) for buffer_size and
8 MB (1<<23) for short_seek_threshold.
However, if the index contained entries with a much larger
delta, setting pos_delta to a value larger than the sanity
limit, we would end up not increasing the buffer size at all.
Instead, ignore the individual deltas that are excessive, but
increase the buffer size based on the deltas that are below the
sanity limit.
Only count deltas that are below 1<<23, 8 MB; pos_delta gets doubled
before setting the buffer size - this matches the previous maximum
buffer size of 1<<24, 16 MB.
This can happen e.g. with a mov file with some tracks containing
some samples that belong in the start of the file, at the end of
the mdat, while the rest of the file is mostly reasonably interleaved;
previously those samples caused the maximum pos_delta to skyrocket,
skipping any buffer size enlargement.
Signed-off-by: Martin Storsjö <martin@martin.st>
When scanning through the index, account for the fact that the
compared samples may be located in an unexpected order in the file;
this function is mainly interested in the absolute difference between
file locations.
Signed-off-by: Martin Storsjö <martin@martin.st>
While the inline cabac assembly has worked correctly in i386 builds
historically, modern compiler updates has started showing issues
with it, when the function gets inlined into larger contexts that
fail to provide the amount of free registers as this function
requires.
This was an issue with Clang on Windows on i386, which was fixed
in c6d284b945324a7bc70ea8b9056040c8148aa835. However, recently
the same issues also have started showing up with GCC (both for
Windows and Linux). Whether the issue appears seems dependent on
a lot of optimizer tuning (e.g. the issue appears or goes away
depenent on the combinaton of -march= and -mtune= options),
potentially due to the compiler making different decisions on
how much to inline.
Fixes: https://trac.ffmpeg.org/ticket/8903
Signed-off-by: Martin Storsjö <martin@martin.st>
Add support for writing sBIT chunks, which mark the significant
bit depth of the PNG file. This obtains the metadata using the field
bits_per_raw_sample of AVCodecContext.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Add support for reading sBIT chunks, which mark the significant
bit depth of the PNG file. This passes the metadata using the field
bits_per_raw_sample of AVCodecContext.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Some specifications require the size of ld/eld frames to be 480 samples
instead of the default 512. libfdk_aac provides an option to set an alternative
frame size, but it's not exposed via the ffmpeg interface.
This patch adds a frame_length option to solve this problem.
Signed-off-by: Raphael Schlarb <info@raphael.schlarb.one>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: James Almer <jamrial@gmail.com>
Otherwise the output format is not changed when output is in system
memory. For example, the output format is still p010le in the following
case:
$ ffmpeg -qsv_device /dev/dri/renderD128 -f lavfi -i testsrc -vf
"format=p010le,vpp_qsv=extra_hw_frames=8:format=nv12" -f null -
...
Output #0, null, to 'pipe:':
Metadata:
encoder : Lavf60.4.100
Stream #0:0: Video: wrapped_avframe, p010le(tv, progressive), 320x240
[SAR 1:1 DAR 4:3], q=2-31, 200 kb/s, 25 fps, 25 tbn
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Drop mention of unsupported N:M syntax, dropped since 0ed61546c4.
Also, drop reference of common expression constants, and fix
description of a expression parameter.
Fix issue:
http://trac.ffmpeg.org/ticket/9974
Reference drawtext textfile option and ffmpeg -filter_complex_script
and -filter_script as possible solutions to avoid shell escaping.
Address issue:
http://trac.ffmpeg.org/ticket/9008
This patch add another ARIB caption decoder using libaribcaption
external library.
Unlike libaribb24, it supports 3 types of subtitle outputs:
* text: plain text
* ass: ASS formatted text
* bitmap: bitmap image
Default subtitle type is ass as same as libaribb24.
Advantages compared with libaribb24 on ASS subtitle are:
* Subtitle positioning.
* Multi-rect subtitle: some captions are displayed at different
position at a time.
* More stability and reproducibility.
To compile with this feature:
* libaribcaption external library has to be pre-installed.
https://github.com/xqq/libaribcaption
* configure with `--enable-libaribcaption` option.
`--enable-libaribb24` and `--enable-libaribcaption` options are
not exclusive. If both enabled, libaribcaption precedes as
order listed in `libavcodec/allcodecs.c`.
Signed-off-by: rcombs <rcombs@rcombs.me>
Some additional properties are set for ARIB caption.
* need_parsing = 0
ARIB caption doesn't require any parser.
This avoids "parser not found" warning message.
* need_context_update = 1
When any profiles are changed, set this flag to notify.
Signed-off-by: rcombs <rcombs@rcombs.me>
To support bitmap subtitle output, remove AV_CODEC_PROP_TEXT_SUB
property from codec descriptor for AV_CODEC_ID_ARIB_CAPTION.
This is similar to `libavcodec/libzvbi-teletextdec.c`
(AV_CODEC_ID_DVB_TELETEXT).
Instead, each subtitle decoder has to specify a subtitile format.
`libavcodec/libaribb24.c` uses same AV_CODEC_ID_ARIB_CAPTION and
expects AV_CODEC_PROP_TEXT_SUB to be set, so this adds a line to
specify a format there.
Signed-off-by: rcombs <rcombs@rcombs.me>
Currently this would not be done if max_frames is triggered.
Makes no difference in either of the tools currently using
decode_simple, but may be important in future tools.
The previous commit allowed turning on error correction for interlaced
samples. Turning it off amounts to a no-op for FATE. These samples
should be tested with EC1-3 (guess_mvs/deblock/favor_inter)
additionally.
Signed-off-by: J. Dekker <jdek@itanimul.li>
This change on its own is almost certainly not correct; however, in
testing, many samples show notable improvement.
Signed-off-by: J. Dekker <jdek@itanimul.li>
This allows users to specify an argument such as './configure
--enable-lto=thin' to use ThinLTO with Clang. The old functionality with
'./configure --enable-lto' is preserved.
Signed-off-by: J. Dekker <jdek@itanimul.li>
According to MXF specs the Stored Rectangle corresponds to the data which is
passed to the compressor and received from the decompressor, so they should
contain the width / height extended to the macroblock boundary.
In practice however width and height values rounded to the upper 16 multiples
are only seen when muxing MPEG formats. Therefore this patch changes stored
width and height values to unrounded for all non-MPEG formats, even macroblock
based ones.
For DNXHD the specs (ST 2019-4) explicitly indicates to use 1080 for 1088p.
For ProRes the specs (RDD 44) only refer to to ST 377-1 without precision but
no known commercial implementations are using rounded values.
DV is not using 16x16 macroblocks, so 16 rounding makes no sense.
The patch also fixes Sampled Width / Display Width to use unrounded values.
Signed-off-by: Marton Balint <cus@passwd.hu>
Add the appropriate descriptors to the MPEG-TS demux and mux to
ensure that SMPTE 2038 VANC streams are properly preserved
when using codec copy (including adding the appropriate PMT
descriptors).
The focus of this patch is TS input to TS output. A separate
patch adds support for output of 2038 VANC over decklink SDI.
Thanks to Marton Balint for feedback to preserve ABI compatibility.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Add stack_internal.h to the list of skipped headers to fix
make checkheaders fail, it's introduced by commit 742dfa281
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
This way we can clean up separate definitions in functions with
just a single loop, as well as have no reuse between different
loops' counters in functions with multiple.
This is more correct, but was not possible before the recently-added
filtergraph parsing API.
Also, only pass hw devices to filters that are flagged as capable of
using them.
Tested-by: Niklas Haas
This reverts commit 9413bdc381.
That commit broke the fate HEVC tests - unfortunately I only
tested checkasm for that patch, and that function is still
lacking checkasm coverage.
Signed-off-by: Martin Storsjö <martin@martin.st>
pts may not be set on input packets, which could result in the entire stream
being discarded.
This reverts commit 8fc2dedfe6, reintroducing the
behavior it replaced but now allowing the caller to manually drop the preroll
samples by looking at the skip_samples side data at the start while ignoring it
on seek, by setting the skip_manual avctx flag.
Fixes ticket #10251.
Suggested-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
These fields are supposed to store information about the packet the
frame was decoded from, specifically the byte offset it was stored at
and its size.
However,
- the fields are highly ad-hoc - there is no strong reason why
specifically those (and not any other) packet properties should have a
dedicated field in AVFrame; unlike e.g. the timestamps, there is no
fundamental link between coded packet offset/size and decoded frames
- they only make sense for frames produced by decoding demuxed packets,
and even then it is not always the case that the encoded data was
stored in the file as a contiguous sequence of bytes (in order for pos
to be well-defined)
- pkt_pos was added without much explanation, apparently to allow
passthrough of this information through lavfi in order to handle byte
seeking in ffplay. That is now implemented using arbitrary user data
passthrough in AVFrame.opaque_ref.
- several filters use pkt_pos as a variable available to user-supplied
expressions, but there seems to be no established motivation for using them.
- pkt_size was added for use in ffprobe, but that too is now handled
without using this field. Additonally, the values of this field
produced by libavcodec are flawed, as described in the previous
ffprobe conversion commit.
In summary - these fields are ill-defined and insufficiently motivated,
so deprecate them.
These fields are ad-hoc and will be deprecated. Use the recently-added
AV_CODEC_FLAG_COPY_OPAQUE to pass arbitrary user data from packets to
frames.
Changes the result of the flcl1905 test, which uses ffprobe to decode
wmav2 with multiple frames per packet. Such packets are handled
internally by calling the decoder's decode callback multiple times,
offsetting the internal packet's data pointer and decreasing its size
after each call. The output pkt_size value before this commit is then
the remaining internal packet size at the time of each internal decode
call.
After this commit, output pkt_size is simply the size of the full packet
submitted by the caller to the decoder. This is more correct, since
internal packets are never seen by the caller and should have no
observable outside effects.
The AVPacket given to an encoder's encode callback
is unreferenced generically on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AVPacket given to an encoder's encode callback
is unreferenced generically on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AVPacket given to an encoder's encode callback
is unreferenced generically on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
FFmpeg's assembly code currently does not abide by the
plattform-specific ABIs wrt its handling of the X86 MMX flag:
Resetting the MMX state is deferred to avoid doing it multiple times
instead of ensuring that the CPU is in floating point state
upon return from any function.
Furthermore, resetting said state is sometimes done generically,
namely for all the decoders using the ordinary decode callback;
yet this is not done for the decoders using the receive_frame API.
This led to problems when MJPEG (and the MJPEG-based decoders)
were switched to the receive_frame API in commit
e9a2a87773, because ff_mjpeg_decode_sos()
only resets the MMX state on success, not on failure.
Such issues are probably still possible with SMVJPEG, which still
uses the receive_frame API. See issue #10210.
This commit therefore also resets the MMX state for
the receive_frame API to avoid any more surprises of this sort.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The base_enable_flag is parallel to three_Spline_enable_flag. The
typesetting of the specification is very misleading.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
It conflicts the comments. The operation based on Delta_enable_mode
can be applied by user during tone mapping.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The original code would strip off the PTS/DTS of any packets
which had a stream ID of STREAM_ID_PRIVATE_STREAM_1. While the
intent was to apply this to asynchronous KLV packets, it was
being applied to any codec that had that same stream ID (including
types such as SMPTE 2038).
Add a clause to the if() statement to ensure it only gets applied
if the codec actually is KLV.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
ipcm is defined by ISO/IEC 23003-5, not defined by quicktime. After
adding ISO/IEC 23003-5 support, we don't need it for ticket #9219.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
This also fixes the number of planes for the NV formats
(this seems to not have caused any problems).
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
SSIM360Context.ssim360_hist is an array of four pointers to double;
so sizeof(*ssim360_hist[0]) (=sizeof(double)) is the correct size
to use to calculate the amount of memory to allocate, not
sizeof(*ssim360_hist) (which is sizeof(double*)).
Use FF_ALLOCZ_TYPED_ARRAY to avoid this issue altogether.
Fixes Coverity issue #1520671.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Generally if maxrate is set, the calculation should be maxrate over
bufsize. This additionally enables CRF + maxrate & bufsize usage.
In order to keep negative values from enabling zero to be treated
as larger and causing a division by zero, check that one of the
variables is larger than zero.
This has not been functional since a year ago, including in our current
minimum dependency of libplacebo (v4.192.0). It also causes build errors
against libplacebo v6, so it needs to be removed from the code. We can
keep the option around for now, but it should also be removed soon.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit 205117d87f.
This didn't fix make checkheaders after all, and also broke compilation in some
scenarios.
Signed-off-by: James Almer <jamrial@gmail.com>
It is currently abused to store packet size, which breaks
AV_CODEC_FLAG_COPY_OPAQUE.
Use stream_index instead, which is unused in libavcodec and has the
same type as size.
Found-by: Martin Storsjö
This includes Mastering Display, Content light level, and some ITU-T T35
metadata like closed captions and HDR10+.
Signed-off-by: James Almer <jamrial@gmail.com>
If the packets returned by libvpx and our internal frame properties
queue get desynchronized for some reason (should not happen, but it is
not clear libvpx API guarantees this), we will keep adding to the queue
indefinitely and never remove anything.
Change the code to drain the queue even if timestamps do not match.
This AVFifo is used to propagate HDR metadata from input frames to
output packets, since libvpx does not allow passing through arbitrary
user data.
It will be extended to pass through other kinds of data in future
commits, so give it a more generic name.
It is not used, except to check whether the packet is valid before
writing HDR metadata to the packet in storeframe(). However, that check
serves no purpose, as the encoded packet is already treated as valid
higher up in this function.
svg is xml, but <?xml is not required,
it can start with <svg and can have multiple empty lines,
or start with <!-- include some comments,
but must first line if start with <?xml.
Signed-off-by: Wang Yaqiang <wangyaqiang03@kuaishou.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Due to refactoring, the ctx/cctx variables are never actually used
in ff_decklink_write_packet(), so just remove them.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The ff_decklink_write_packet() was always caching the last pts
received, to be used when calling StopScheduledPlayback(). However
because audio and video are on different timebases and the call to
StopScheduledPlayback() expects the video timebase, we'll end up
sending a weird value to the stop routine if the last packet
received contained audio.
Move the setting of last_pts to just be for the video stream.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The existing code assumed that the first frame received by the decklink
output would always be PTS zero. However if running in other timing
modes than the default of CBR, items such as frame dropping at the
beginning may result in starting at a non-zero PTS.
For example, in our setup because we discard probing data and run
with "-vsync 2" the first video frame scheduled to the decklink
output will have a PTS around 170. Scheduling frames too far into
the future will either fail or cause a backlog of frames scheduled
far enough into the future that the entire pipeline will stall.
Issue can be reproduced with the following command-line:
./ffmpeg -copyts -i foo.ts -f decklink -vcodec v210 -ac 2 'DeckLink Duo (4)'
Keep track of the PTS of the first frame received, so that when
we enable start playback we can provide that value to the decklink
driver.
Thanks to Marton Balint for review and suggestion to use
AV_NOPTS_VALUE rather than zero for the initial value.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The path attribute in the Set-Cookie header is optional but treated by ffmpeg as being compulsory.
Signed-off-by: Michael J. Walsh <mjfwalsh@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes compilation with clang which errors out on Wint-conversion.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes the following error when compiling with a modern
version of Clang for Windows/i386:
src/libavutil/hwcontext_vulkan.c:738:32: error: incompatible function pointer types initializing 'PFN_vkDebugUtilsMessengerCallbackEXT' (aka 'unsigned int (*)(enum VkDebugUtilsMessageSeverityFlagBitsEXT, unsigned int, const struct VkDebugUtilsMessengerCallbackDataEXT *, void *) __attribute__((stdcall))') with an expression of type 'VkBool32 (VkDebugUtilsMessageSeverityFlagBitsEXT, VkDebugUtilsMessageTypeFlagsEXT, const VkDebugUtilsMessengerCallbackDataEXT *, void *)' (aka 'unsigned int (enum VkDebugUtilsMessageSeverityFlagBitsEXT, unsigned int, const struct VkDebugUtilsMessengerCallbackDataEXT *, void *)') [-Wincompatible-function-pointer-types]
.pfnUserCallback = vk_dbg_callback,
^~~~~~~~~~~~~~~
Signed-off-by: Martin Storsjö <martin@martin.st>
Restores the behavior of naming the instance filter@id, which was accidentally changed
to simpy id in commit f17051eaae.
Fixes ticket #10226.
Signed-off-by: James Almer <jamrial@gmail.com>
As per 23003-5:2020, the rest of the bits are reserved, and thus
in the future they may be utilized for something else.
Quote:
format_flags is a field of flags that modify the default PCM sample format.
Undefined flags are reserved and shall be zero. The following flag is defined:
0x01 indicates little-endian format. If not present, big-endian format is used.
In texi source, @ characters need to be escaped.
This fixes the following build errors:
community.texi:59: unknown command `ffmpeg'
community.texi:143: unknown command `ffmpeg'
Signed-off-by: Martin Storsjö <martin@martin.st>
Remove doc/dev_communit markup files completely as they are at the wrong place.
Create a new community page, merging all of doc/dev_community and subsection Code of Conduct into a common place.
The corresponding patch to ffmpeg-web puts the Organisation & Code of Conduct into a seperate community chapter on the FFmpeg website.
When hls_init_time should available when hls_list_size > 0.
Because the list will not refresh new top line segment when hls_list_size is 0
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
According to description of vaExportSurfaceHandle in libva, vaSyncSurface
must be called if the contents of the surface will be read.
Fixes ticket #9967.
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
MSDK/VPL uses 420 chroma format as default to encode RGB, and this is
not a proper usage. Now enable 444 encoding for RGB input by default.
When main profile is used, RGB input is still encoded in 420 format.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Note that Screen-Extended Main 4:4:4 and 4:4:4 10 supports
chroma_format_idc from 0, 1 or 3, hence both 420 and 444 are
supported.
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Screen Content Coding allows non-intra slice in an IRAP frame which can
reference the frame itself, and would mark the current decoded picture
as "used for long-term reference", no matter TwoVersionsOfCurrDecPicFlag(8.1.3),
hence some previous restricts are not suitable any more.
Constructe RefPicListTemp and RefPicList according to 8-8/9/10. Disable
slice decoding for SCC profile to avoid unexpected error in hevc native
decoder and patch welcome.
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
According to 7.3.6.1, use_integer_mv_flag should be parsed if
motion_vector_resolution_control_idc equals to 2. If not present, it
equals to motion_vector_resolution_control_idc.
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
1. Add extension syntax according to 7.3.2.2.3/7.3.2.3.3 in T-REC-H.265-201911.
2. Keep using parsed PPS when bitstream overread for compatibility. For
example, the clip PS_A_VIDYO_3.bit in FATE test has incomplete extension
syntax which will be overread and un-decodable if without this change.
3. Format brace in pps_range_extensions().
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Described in HEVC spec A.3.7. Bump minor version and add APIchanges
entry for new added profile.
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Replace cpucfg with getauxval to avoid crash in case of
some processor capabilities are not supportted by kernel used.
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Fixes: out of array access
Fixes: 48567/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BINK_fuzzer-6657932926517248
Alterantivly to this it is possibly to allocate a bigger array
Note: oss-fuzz assigned this issue to a unrelated theora bug so the bug number matches that
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read on 32bit
Fixes: 54857/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_VC1_fuzzer-5840588224462848
The chroma MC code reads over the currently allocated frame.
Alternative fixes would be allocating a few bytes more at the end instead of a whole
line extra or to adjust the threshold where the edge emu code is activated
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access:
Fixes: 48567/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PNG_fuzzer-6716193709096960
Alternatively it should be possible to limit this to 3 plane RGB 8 /16bit to ensure the size is what it should be
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Such filters will not advance and be stuck in the current implementation
Fixes: Infinite loop
Fixes: 56052/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RKA_fuzzer-5236218750435328
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of negative value -3201
Fixes: integer overflow: -76470276 * -25608 cannot be represented in type 'int'
Fixes: 56052/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RKA_fuzzer-5236218750435328
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: division by zero
Fixes: 55940/clusterfuzz-testcase-minimized-ffmpeg_IO_DEMUXER_fuzzer-6333107679920128
The decoder does not support bps=1 and i have no such sample so it is not
known if this duration is correct. Alternatively we could error out on all
bps we currently do not support on the decoder side or not set duration.
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 9223372036854775584 + 536870912 cannot be represented in type 'long'
Fixes: 55844/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-510613920664780
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Remove CONFIG_VAAPI for VUYX, YUYV422, Y210, XV30, Y212, XV36.
Make 8-bit, 10-bit, 12-bit YUV 4:2:2 video sources as well as YUV 4:4:4
video sources supported by d3d11va and dxva2 just like what VAAPI does.
Sign-off-by: Tong Wu <tong1.wu@intel.com>
Add support for VUYX, YUYV422, Y210, XV30, P012, Y212, XV36.
The added formats work with qsv acceleration and will not have
impact on dxva2 acceleration(-hwaccel dxva2) since so far
these formats are still not supported by using dxva2 acceleration.
Hwupload and hwdownload can work with the added formats.
Signed-off-by: Tong Wu <tong1.wu@intel.com>
Add support for VUYX, YUYV422, Y210, XV30, P012, Y212, XV36.
The added formats work with qsv acceleration and will not have
impact on d3d11va acceleration(-hwaccel d3d11va) since so far
these formats are still not supported by using d3d11va acceleration.
Hwupload and hwdownload can work with the added formats.
Signed-off-by: Tong Wu <tong1.wu@intel.com>
Current mpegtsenc code only inserts SPS/PPS from extradata before IDR frames if
AUD is also inserted.
Unfortunately some encoders may preface a key frame with an AUD, but no
SPS/PPS. In that case current code does not repeat the "extradata" and the
resulting HLS stream may become noncompliant and unjoinable.
Fix this by always inserting SPS/PPS and moving AUD to the beginning of the
packet if it is already present.
Fixes ticket #10148.
Signed-off-by: Marton Balint <cus@passwd.hu>
The FFmpeg project is organized through a community working on global consensus.
Decisions are taken by the ensemble of active members, through voting and are aided by two committees.
@anchor{General Assembly}
@chapter General Assembly
The ensemble of active members is called the General Assembly (GA).
The General Assembly is sovereign and legitimate for all its decisions regarding the FFmpeg project.
The General Assembly is made up of active contributors.
Contributors are considered "active contributors" if they have authored more than 20 patches in the last 36 months in the main FFmpeg repository, or if they have been voted in by the GA.
The list of active contributors is updated twice each year, on 1st January and 1st July, 0:00 UTC.
Additional members are added to the General Assembly through a vote after proposal by a member of the General Assembly. They are part of the GA for two years, after which they need a confirmation by the GA.
A script to generate the current members of the general assembly (minus members voted in) can be found in `tools/general_assembly.pl`.
@anchor{Voting}
@chapter Voting
Voting is done using a ranked voting system, currently running on https://vote.ffmpeg.org/ .
Majority vote means more than 50% of the expressed ballots.
@anchor{Technical Committee}
@chapter Technical Committee
The Technical Committee (TC) is here to arbitrate and make decisions when technical conflicts occur in the project. They will consider the merits of all the positions, judge them and make a decision.
The TC resolves technical conflicts but is not a technical steering committee.
Decisions by the TC are binding for all the contributors.
Decisions made by the TC can be re-opened after 1 year or by a majority vote of the General Assembly, requested by one of the member of the GA.
The TC is elected by the General Assembly for a duration of 1 year, and is composed of 5 members. Members can be re-elected if they wish. A majority vote in the General Assembly can trigger a new election of the TC.
The members of the TC can be elected from outside of the GA. Candidates for election can either be suggested or self-nominated.
The conflict resolution process is detailed in the resolution process document.
The TC can be contacted at <tc@@ffmpeg>.
@anchor{Resolution Process}
@section Resolution Process
The Technical Committee (TC) is here to arbitrate and make decisions when technical conflicts occur in the project.
The TC main role is to resolve technical conflicts. It is therefore not a technical steering committee, but it is understood that some decisions might impact the future of the project.
@subsection Seizing
The TC can take possession of any technical matter that it sees fit.
To involve the TC in a matter, email tc@ or CC them on an ongoing discussion.
As members of TC are developers, they also can email tc@ to raise an issue.
@subsection Announcement
The TC, once seized, must announce itself on the main mailing list, with a [TC] tag.
The TC has 2 modes of operation: a RFC one and an internal one.
If the TC thinks it needs the input from the larger community, the TC can call for a RFC. Else, it can decide by itself.
If the disagreement involves a member of the TC, that member should recuse themselves from the decision.
The decision to use a RFC process or an internal discussion is a discretionary decision of the TC.
The TC can also reject a seizure for a few reasons such as: the matter was not discussed enough previously; it lacks expertise to reach a beneficial decision on the matter; or the matter is too trivial.
@subsection RFC call
In the RFC mode, one person from the TC posts on the mailing list the technical question and will request input from the community.
The mail will have the following specification:
a precise title
a specific tag [TC RFC]
a top-level email
contain a precise question that does not exceed 100 words and that is answerable by developers
may have an extra description, or a link to a previous discussion, if deemed necessary,
contain a precise end date for the answers.
The answers from the community must be on the main mailing list and must have the following specification:
keep the tag and the title unchanged
limited to 400 words
a first-level, answering directly to the main email
answering to the question.
Further replies to answers are permitted, as long as they conform to the community standards of politeness, they are limited to 100 words, and are not nested more than once. (max-depth=2)
After the end-date, mails on the thread will be ignored.
Violations of those rules will be escalated through the Community Committee.
After all the emails are in, the TC has 96 hours to give its final decision. Exceptionally, the TC can request an extra delay, that will be notified on the mailing list.
@subsection Within TC
In the internal case, the TC has 96 hours to give its final decision. Exceptionally, the TC can request an extra delay.
@subsection Decisions
The decisions from the TC will be sent on the mailing list, with the [TC] tag.
Internally, the TC should take decisions with a majority, or using ranked-choice voting.
The decision from the TC should be published with a summary of the reasons that lead to this decision.
The decisions from the TC are final, until the matters are reopened after no less than one year.
@anchor{Community Committee}
@chapter Community Committee
The Community Committee (CC) is here to arbitrage and make decisions when inter-personal conflicts occur in the project. It will decide quickly and take actions, for the sake of the project.
The CC can remove privileges of offending members, including removal of commit access and temporary ban from the community.
Decisions made by the CC can be re-opened after 1 year or by a majority vote of the General Assembly. Indefinite bans from the community must be confirmed by the General Assembly, in a majority vote.
The CC is elected by the General Assembly for a duration of 1 year, and is composed of 5 members. Members can be re-elected if they wish. A majority vote in the General Assembly can trigger a new election of the CC.
The members of the CC can be elected from outside of the GA. Candidates for election can either be suggested or self-nominated.
The CC is governed by and responsible for enforcing the Code of Conduct.
The CC can be contacted at <cc@@ffmpeg>.
@anchor{Code of Conduct}
@chapter Code of Conduct
Be friendly and respectful towards others and third parties.
Treat others the way you yourself want to be treated.
Be considerate. Not everyone shares the same viewpoint and priorities as you do.
Different opinions and interpretations help the project.
Looking at issues from a different perspective assists development.
Do not assume malice for things that can be attributed to incompetence. Even if
it is malice, it's rarely good to start with that as initial assumption.
Stay friendly even if someone acts contrarily. Everyone has a bad day
once in a while.
If you yourself have a bad day or are angry then try to take a break and reply
once you are calm and without anger if you have to.
Try to help other team members and cooperate if you can.
The goal of software development is to create technical excellence, not for any
individual to be better and "win" against the others. Large software projects
are only possible and successful through teamwork.
If someone struggles do not put them down. Give them a helping hand
instead and point them in the right direction.
Finally, keep in mind the immortal words of Bill and Ted,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
