This fixes the ffprobe tests under mingw/wine
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit a96e3a3e77)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I was sadly unable to find a non fuzzed mp3 that uses the
feature that contained the bug (and i searched hard ...), thus
while this fixes the security issue. It may or may not fix
mixed blocks in 8khz mp3s, i cant say due to lack of samples to test.
Security issue exists since: b37d945dd4
Reported-by: Dale Curtis <dalecurtis@google.com>
(Probably) Found-by: inferno@chromium.org
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes some DNXHD files generated by AVID TM, where codec UL was set to A-law
meanwhile the real audio codec was PCM S16. According to SMPTE RP 224, A-law is
the default value for sound essence parameters therefore we should handle it
specially.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Implement av_buffersink_read() and av_buffersink_read_samples()
for ffmpeg's version of buffersink.
With this change, avconv linked against ffmpeg's libraries passes
the same number of tests whether it uses ffbuffersink or
buffersink_old.
* qatar/master:
nutdec: const correctness for get_v_trace/get_s_trace function arguments
truemotion2: Request samples for old TM2 headers
rtpdec: Remove a useless ff_ prefix from a static symbol
rtpdec: Support depacketizing speex
rtpenc: Add support for packetizing speex
Conflicts:
libavformat/rtpdec.c
libavformat/sdp.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also factorize the common options for the different mov-based tests.
Since the header is now on top in the last generated file, the data
offset in the seek test needed some updates as well.
At the moment, the moov header is written at the end of the file, so we
can use the current offset (which focus on the end of the mdat already
written) to guess if 64-bits offset will be required or not.
Though, the next commits will make possible the writing of this table at
the beginning, so this heuristic can't work. As a consequence, we check
all the values within the potential offset table for any value >
32-bits.
Normally we discard things prior to the intended start
for stream copy this is not always possible, and its not done by default
this option allows discarding to be enabled
this is primarely usefull when transcoding a video and stream copying an
audio stream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously we had ignored the past dts and just filled in from the
point where we have had sufficient information.
This should fix Ticket1734
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This packetization scheme simply places the full packets into the
RTP packet without any extra header bytes.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit d25f87f517.
This breaks decoding of some h264 files
I have tested the original patch with fate but by mistake have
forgotten to specify the fate samples so testing was limited to
the internal regression tests.
* qatar/master:
xsub: feed init_get_bits the whole buffer
libfdk-aac: Allow setting VBR modes via a private option
libfdk-aac: Warn the user that the VBR modes are unsupported
Revert "cbrt_tablegen: Include libm.h"
Conflicts:
libavcodec/xsubdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Discard unflexible structure based on the root/chapter/section layout in
favor of a generalized concept of section.
This should allow to represent sections at a generic level of nesting,
and allow subsection fields selection.
Also, simplify the code.
All versions of MinGW-w64 prior to version 3, as well as
all versions of MinGW32 have broken implementations of
vsnprintf.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Do not use rlelen field for buffer size in init_get_bits, it is
only the size of the data for the first field.
Since it is not reliable, just use the size of the whole buffer.
Additional comments add removal of unused rlelen variable by
Reimar Döffinger.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This avoids using the global_quality field and QSCALE flag for
passing the VBR modes, since the value range of the global_quality
field doesn't really map cleanly to this codec's VBR modes.
Signed-off-by: Martin Storsjö <martin@martin.st>
These modes were not originally exposed by the library at all.
In practice, only a few of them work for each sample rate/profile
combination, and they don't work at all for the more uncommon
sample rates.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
pthread: make sure AVFrame.extended_data is set properly.
libfdk-aac: reindent after last commit
libfdk-aac: Limit to supported sample rates.
cbrt_tablegen: Include libm.h
oggparsetheora: make it more robust
ogg: prevent NULL pointer deference in theora gptopts
Conflicts:
libavformat/oggparsetheora.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd1f05dd18375f2f8e68372edee11436927e43ba8':
ogg: calculate the start position once all the headers are parsed
Conflicts:
libavformat/oggdec.c
libavformat/oggparseskeleton.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7751e4693dd10ec98c20fbd9887233b575034272':
ogg: check that the expected number of headers had been parsed
libx264: change default to closed gop to match x264cli
Use avcodec_free_frame() to free AVFrames.
lavf: use a malloced AVFrame in try_decode_frame().
lavc: add avcodec_free_frame().
lavc: ensure extended_data is set properly on decoding
lavc: initialize AVFrame.extended_data in avcodec_get_frame_defaults()
lavc: use av_mallocz to allocate AVFrames.
lavc: rename the argument of avcodec_alloc_frame/get_frame_defaults
Conflicts:
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/src_movie.c
libavformat/oggdec.c
libavformat/oggdec.h
libavformat/oggparsetheora.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make writer_print_time() and writer_print_rational() always call
writer_print_int() or writer_print_string(). This way the checks for
determining if the value should be printed or not are consistently
performed in the low level functions.
writer_print_rational() is moved downward in order to avoid a forward
reference.
Simplify/amend the overall logic.
This breaks bitstream compatibility of 1.3 VLC streams
This fixes very rare errors in the RC stream at the transition point
to VLC.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Additional safety in case a special ogg stream is crafted
with the proper number of
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtp: Packetization of JPEG (RFC 2435)
smoothstreamingenc: Copy the SAR on the AVStreams as well
Conflicts:
Changelog
libavformat/rtpenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
with the exception of libpostproc runtime_cpudetect = no is not
supported thus having no as default really is quite odd, it results in
a libpostproc where HAVE_MMX* have very different meaning from the
rest of ffmpeg and it breaks any x86 cpu that doesnt support mmx2
because mmx2 is hardcoded as a result
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is intentional (and a reason why fast usually should not be used),
but a few people sent patches to "fix" this recently so it would be
better to document this.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
RTPDynamicProtocolHandler for speex is added. Initial support for
speex depacketization from RTP stream comes with it.
Currently, only codec audio rate can be applied based on sdp:
* Narrowband ( 8K)
* Wideband (16K)
* Ultrawideband (32K)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* libspeex audio codec is no longer considered unsupported
when using rtp as output format.
* SDP rtpmap is added for speex payload, formatted according to RFC
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Parse expression only when a new value is explicitly specified.
In particular, avoid double free in case an old expression value is
cached, it is set in the context, it is freed as the old value, and
finally the pointer stored in the context is freed again when the filter
is released.
Fix Ticket #1617, revealing a regression I introduced in 8f3eebd.
We need to make sure no stream is added in between Ogg context save and
restore operations (because it would likely lead to a mismatch between
ogg->nstreams and AVFormatContext->nb_streams after the restore op).
This is the reason the ogg->state check is added in ogg_new_stream().
Before this patch, checking for ogg->headers was preventing this:
ogg->headers is always set before any ogg save/restore (though, it was
also preventing from creating the stream when necessary).
Not all applications (e.g. MPlayer) set block_align, and
when using a different demuxer it might not even be
easily available.
So fall back to selecting mode based on bit rate as before
if block_align has not useful value.
It can't be worse than failing to decode completely.
(cherry picked from commit 1d0d63052b)
CC: libav-stable@libav.org
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/master:
libx264: add forgotten ;
matroskadec: fix a sanity check.
matroskadec: only return corrupt packets that actually contain data
lavf: zero data/size of the packet passed to read_packet().
ARM: use 2-operand syntax for ADD Rd, PC in Apple PIC code
ARM: align PIC offset pools to 4 bytes
ARM: swap source operands in some add instructions
configure: update tms470 detection for latest version
lavf probe: prevent codec probe with no data at all seen
motion_est: fix use of inline on extern functions
Conflicts:
libavcodec/motion_est_template.c
libavformat/matroskadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When building Thumb2 code, the end of a function, where the PIC
offsets are placed, need not be aligned. Although the values
are only accessed with instructions allowing unaligned addresses,
keeping them aligned is preferable.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
mp3dec: read Xing frame TOC index
mp3dec: use named constants for Xing header flags
libx264: add support for nal-hrd, required for Blu-ray streams.
mov: support random access point grouping
matroskadec: properly support BlockDuration
Conflicts:
libavcodec/libx264.c
libavformat/isom.h
libavformat/matroskadec.c
libavformat/mov.c
libavformat/mp3dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '117d8c6d1f1c187ffc6098d9618457e00534e013':
matroska: implement support for ProRes
matroska: implement support for ALAC
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
v5.0 of the TI ARM compiler changes the version string.
This updates the detection to check for both the old and
the new strings.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This occurs with fuzzed mpeg-ts files. set_codec_from_probe_data() is
called with a zeroed AVProbeData since no packet made through for
specific stream.
Previously the device was returning EOF when the first sink was ending,
with the current change the device will continue to return frames until
all the sinks are EOF, which seems the most expected behavior.
Inline functions declared without extern do not provide an external
definition in standard C99. This code only works because most
compilers do not implement the inline semantics correctly. With a
stricter compiler, linking fails with unresolved references to these
functions.
Declaring the functions extern inline works correctly with some
compilers while some others still fail to create external definitions.
For maximum portability, create a static inline version with an
externally visible wrapper for ff_get_mb_score. ff_epzs_motion_search
is so large that no sane compiler inlines it anyway, so there the
inline keyword can simply be dropped with no effect.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* commit '581281e242609a222233a2e5538b89dfb88fb18e':
matroskadec: check realloc in lzo encoding
matroska: honor error_recognition on unknown doctypes
tiffdec: Add support for GRAY16LE.
tiffenc: Add support for little endian RGB48 and GRAY16
mpeg4: support frame parameter changes with frame-mt
mpegvideo: check ff_find_unused_picture() return value for errors
mpegvideo: release frame buffers before freeing them
configure: msvc: default to 'lib' as 'ar' tool
build: support some non-standard ar variants
Conflicts:
libavcodec/h263dec.c
libavcodec/mpegvideo.c
libavcodec/tiff.c
libavcodec/tiffenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Frames described by this grouping are the starter of a closed or
an open GOP.
This is useful for open GOP of H.264 stream which is not described
by sync sample atom.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Support Matroska native formatting.
On demuxing prepend a Frame container atom (32bit big endian encoded
frame size and 'icpf' string).
On muxing remove it.
Adds a flag context_reinit to MpegEncContext to relieable keep track
of frame parameter changes which require a context reinitialization.
This is required for broken inputs which change the frame size but
error out before the context can be reinitialized.
Thus comparsion against int64_t value will not raise warning
(from -Wextra set) about comparsion of unsigned and signed integer
commiter added () and changed the litteral to unsigned
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
As a sideeffect this makes the code more robust if a future change leaves
a path where it may be uninitialized otherwise.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rv34: use ff_MPV_common_frame_size_change()
mpegvideo: add reinit function for frame parameter changes
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1b3439b3055b083df51d7f7838ecc6b3f708b15c':
mpegvideo: move frame size dependent memory management to separate functions
configure: add --toolchain option
configure: Make the smoothstreaming muxer enable the ismv muxer
smoothstreaming: Export the mp4 codec tags
mov: check for EOF in long lasting loops
avcodec: cleanup utils.c
binkaudio: remove unneeded GET_BITS_SAFE macro
binkaudio: use float sample format
binkaudio: use a different value for the coefficient scale for the DCT codec
Conflicts:
configure
libavcodec/mpegvideo.c
libavcodec/utils.c
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The GRAPH_DESCRIPTION string supplied to graph2dot must include explicitly
defined inputs and outputs which are not normally part of the command line
used in a real invocation.
This clarifies that requirement, and provides an example.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
This is mainly required for frame parameter changes during frame based
multithreading but single threaded usage profits too from avoiding
ff_MPV_common_end()/ff_MPV_common_init() cycles.
Filters now use null pointers to indicate having no input/output pads,
rather than empty lists of pads. We can't assume pad is non-null
anymore.
Signed-off-by: Bobby Bingham <uhmmmm@gmail.com>
This fixes stream copy from a format that already has incompatible
codec tags set. The chained ismv muxer exports this same codec tag
list, so set it on this one as well, to allow the caller (and
lavf common code) to set them correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
A quite widespread pattern in the demuxer is read a 32bit unsigned
integer and then loop till this value is reached.
Checking for EOF prevents pathological situations.
* qatar/master:
flvenc: silence bogus warning
configure: include flags in nm variable
alsdec: fix misplaced parentheses.
alsdec: check return values.
alsdec: fix number of decoded samples in first sub-block in BGMC mode.
alsdec: Fix out of ltp_gain_values read.
alsdec: Check that quantized parcor coeffs are within range.
alsdec: check opt_order.
Conflicts:
configure
libavcodec/alsdec.c
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '23aae62c2cb4504a09ceb8cd0cabc1c8b260f521':
alsdec: Check k used for rice decoder.
avfiltergraph: silence an uninitialized variable warning
xsubenc: reindent
lavc: replace AVCodecContext.encode with subtitle-specific callback
lavc: add const to private codec class initialization.
avconv: don't pass a bogus parameter to avfilter_graph_create_filter().
id3v2: strdup the genre name explicitly.
lavf/id3v2: do not export empty fields.
buffersrc: add const to the AVFrame* argument of av_buffersrc_write_frame()
lavfi: replace empty input/output lists with null pointers
Conflicts:
ffmpeg_filter.c
libavcodec/alsdec.c
libavcodec/dvdsubenc.c
libavcodec/utils.c
libavcodec/v210dec.h
libavfilter/af_channelsplit.c
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
libavfilter/src_movie.c
libavfilter/vf_ass.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The compiler fails to figure out that enc->codec_type can only
have 3 different values.
Thus when an if/else is encountered it triggers on the possibility
of the else case has not initialized the flags variable.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This simplifies ensuring proper flags are used when the default
is overridden by the system or on the command line.
Signed-off-by: Mans Rullgard <mans@mansr.com>
ALS spec:
11.6.3.1.1 Quantization and encoding of parcor coefficients
...
In all cases the resulting quantized values ak are restricted to the range [-64,63].
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Values that fail this check will cause failure of decode_rice()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Fixes out of array write in quant_cof.
Also make sure no invalid opt_order stays in the context.
Fixes CVE-2012-2775
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
The warning is:
libavfilter/avfiltergraph.c: In function ‘avfilter_graph_config’:
libavfilter/avfiltergraph.c:528:9: warning: ‘best_idx’ may be used uninitialized in this function [-Wuninitialized]
libavfilter/avfiltergraph.c:479:13: note: ‘best_idx’ was declared here
Initialize it to an invalid value and add an assert that it's properly
set later.
It would have been done anyway in the av_dict_set() call.
This simplifies the code and avoid a warning because of assigning a
const string from ff_id3v1_genre_str to a non-const variable.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avconv: flush filtered frames before reconfiguring filters
mov: stsd entries must be at least 16 byte
mov: detect EOF in mov_read_dref()
file: return proper error on seek failures
Conflicts:
libavformat/file.c
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to POSIX, strptime() should consume whitespaces in the date
string everytime a whitespace conversion specification is found in the
date format specification. Make av_small_strptime() conform with this
behavior.
In particular, should fix trac ticket #1739.
Fix near infinite loop in stsd parsing.
Bug found by: Diana Elena Muscalu
The size is unsigned according the specification.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Avoid a near infinite loop.
Issue discovered by cosminamironesei.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
mpegvideo: drop unnecessary arguments to hpel_motion()
mpegvideo: drop 'inline' from some functions
nellymoserdec: drop support for s16 output.
bmpdec: only initialize palette for pal8.
build: Properly remove object files while cleaning
flacdsp: arm optimised lpc filter
compat/vsnprintf: return number of bytes required on truncation.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f7fd59d151a2773f0e2e93e56b6b13ec6e5334b':
avformat: fix typo in avformat_close_input
mp3enc: write Xing TOC
mp3enc: support MPEG-2 and MPEG-2.5 in Xing header.
mp3enc: downgrade some errors in writing Xing frame to warnings
lavf: flush the output AVIOContext in av_write_trailer().
lavf: cosmetics, reformat av_write_trailer().
avio: flush the internal buffer in avio_close()
Enhance doc on asyncts audiofilter
cmdutils: avoid setting data pointers to invalid values in alloc_buffer()
libavcodec: remove av_destruct_packet_nofree()
Conflicts:
libavcodec/avpacket.c
libavformat/mp3enc.c
libavformat/nutenc.c
libavformat/utils.c
libavformat/version.h
tests/ref/lavf/voc
tests/ref/lavf/voc_s16
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These arguments are either constants or copies of MpegEncContext
fields just as easily accessed within the function.
Signed-off-by: Mans Rullgard <mans@mansr.com>
These functions do not benefit from being inlined. They are large,
and there are no opportunities for constant propagation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Some implementations of sscanf do not handle a space before a trailing %n
properly.
As an example, MSVC's does this for the second insatnce in this patch, for
an input of "0x3:c0=c1:c1=c0":
1) Match the final "c0" or "c1".
2) Realize it's at the end of the string.
3) Check for %n.
4) There is no %n, but a space instead.
5) Leave 'len' unitilialized.
So, move it out of the sscanf format strings, and call skip_spaces instead.
This bug does not affect skip_spaces since %n is the first and only formatting
string.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
A proper implementation was introduced in
ba53720280 for MSVC, and
MinGW already has vsnprintf.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Previously, object files in, for example, compat/ were left
after a clean or distclean was run.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Remove a bogus warning when using segment_list_type csv.
The LIST_TYPE_EXT constant is only used internally, so it can
be removed when the feature (segment_list_type ext) gets removed.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Should also be faster (though I doubt that hardly ever matters
for the usage here).
Also remove the pointer copy. Since we do not need to reset the
pointer to the start of the string, it is not needed anymore.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
This updated version does not deviate from previous behavior on default value of 'buffer_size'
I skipped porting 'sources', 'block' options for now as they're parsed seriously. So i added TODO remarks.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is all dead and rotting code.
Also, move yuvcmp.c to tools. Its license is non-existent, however,
and should be clarified.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The YUV channels of VP6 are encoded in a highly linear fashion which does
not have any slice-like concept to thread. The alpha channel of VP6A is
fairly independent of the YUV and comprises 40% of the work. This patch
uses the THREAD_SLICE capability to split the YUV and A decodes into
separate threads.
Two bugs are fixed by splitting YUV and alpha state:
- qscale_table from VP6A decode was for alpha channel instead of YUV
- alpha channel filtering settings were overwritten by YUV header parse
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Rather than cleverly managing frame pointers with swaps to avoid
re-using "golden" frames, just do brute-force management of the
4 AVFrames. New strategy is probably no more costly and is easier
to adapt to threaded usage.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Makes golden_frame more like other frame data, paves way for threading
alpha channel decode.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
According to the sample for trac ticket #1722, PGS subtitles
are decoded from several packets at the same DTS and varying PTS.
The PTS from the presentation segment seem to be the valid one;
in particular, clear subtitles are too early with the other PTS.
If the packet has a PTS and the corresponding time base is known,
set the pts field of the decoded subtitle structure before the
call to the decoder. The decoder is still allowed to change the
PTS if necessary.
Japanese DTV uses some non standard extensions in AAC audio.
One example is 'dual mono', which combines two independent
audio into one stereo stream, storing them in left and right channels
respectively. Historically, dual mono audio has been used for
multi-lingual audio, one for local/native language, and another for english,
and usually the "main" (local language) channel should be output without
any user interactions.
The frames of those dual mono audio are allowed to set
ADTS channel_config field to 0, and just contain two SCE's *WITHOUT* PCE,
which is a non standard extension by Japanese DTV standard.
(ref. ARIB STD-B32 PartII 5.2.3)
This patch adds an AVPacket side data, AV_PKT_DATA_JP_DUALMONO,
which indicates that the AVPacket is likely to contain an audio frame
with the above dual mono extension, and has the parameter to specify
the desired channel selection in that case.
It also makes aacdec to detect dual mono and output just the desired
channel when this side data is attached.
Signed-off-by: Akihiro Tsukada <atsukada@users.sourceforge.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some compilers are extra strict about register usage in main(),
disallowing ebp in inline asm there while allowing it elsewhere.
This change makes the test better reflect actual usage.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In both usages of FASTDIV the denominator might be 1.
Using a branch could make the function slower than using a normal
division.
Both denominator and numerator can be multiplied by 2 safely and
using shifts is faster than using a branch.
* qatar/master:
x86: dsputil: Move Xvid IDCT put/add functions to a more suitable place
trasher: Include all the necessary headers
x86: Remove some leftover declarations for non-existent functions
ARM: libavresample: NEON optimised generic fltp to s16 conversion
ARM: libavresample: NEON optimised stereo fltp to s16 conversion
ARM: libavresample: NEON optimised flat float to s16 conversion
Conflicts:
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The c99-to-c89 converter (for MSVC support) doesn't currently handle
designated initializers or compound literals with nested unions or
structs.
This is apparently the only place where this construct is used in the
FFmpeg codebase.
pthread_wait_cond can wake up for no reason (Wikipedia: Spurious_wakeup).
The FF_THREAD_SLICE thread mechanism could spontaneously execute jobs or
allow the caller of avctx->execute to return before all jobs were complete.
This adds tests to both cases to ensure the wakeup is real.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The missing headers are required for errno and for strerror.
This fixes building of this tool on mingw32ce.
Signed-off-by: Martin Storsjö <martin@martin.st>
You should not need to enable verbose logging and all the output that comes
with it in order to get things like the obtained bitrate from a first
pass encode. Many things parse this output.
Also, since it is marked as info in libx264, it should be marked as
info in libavcodec as well.
This reverts commit 911519caec.
This is used by avidemux, and is likely usefull to others too.
Patch by: gruntster (Avidemux Rev 7990 — 2012-05-30 13:02:27)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
os_support: Choose between direct.h and io.h using a configure check
os_support: Include io.h instead of direct.h on mingw32ce
x86: ac3dsp: Only refer to the ac3_downmix_sse symbol if it has been declared
swscale: Remove two bogus asserts
ac3: move ac3_downmix() from dsputil to ac3dsp
lavr/audio_mix_matrix: acknowledge the existence of LFE2.
mlp_parser: avoid mapping multiple disctinct TrueHD channels to the same Libav channel.
lavu/audioconvert: add a second low frequency channel.
Conflicts:
doc/APIchanges
libavcodec/ac3dsp.c
libavcodec/ac3dsp.h
libavcodec/mlp_parser.c
libavutil/audioconvert.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '07584eaf4a95db3f11d3bc411f9786932829e82b':
mpegts: check substreams before discarding
Add a smooth streaming segmenter muxer
file: Add an avoption for disabling truncating existing files on open
img2dec: always close AVIOContexts
rtpdec_jpeg: Error out on other unsupported type values as well
rtpdec_jpeg: Disallow using the reserved q values
rtpdec_jpeg: Fold the default qtables case into an existing if statement
rtpdec_jpeg: Store and reuse old qtables for q values 128-254
rtpdec_jpeg: Simplify the calculation of the number of qtables
rtpdec_jpeg: Add more comments about the fields in the SOF0 section
rtpdec_jpeg: Clarify where the subsampling magic numbers come from
rtpdec_jpeg: Don't use a bitstream writer for the EOI marker
rtpdec_jpeg: Don't needlessly use a bitstream writer for the header
rtpdec_jpeg: Simplify writing of the jpeg header
rtpdec_jpeg: Merge two if statements
rtpdec_jpeg: Write the DHT section properly
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Windows CE doesn't have neither mkdir nor _mkdir officially (only
CreateDirectoryW), but mingw32ce has compat wrappers with these names
(declared in io.h since direct.h is unavailable).
Signed-off-by: Martin Storsjö <martin@martin.st>
This muxer splits the output from the ismv muxer into individual
files, in realtime.
The same can also be done by the standalone tool ismindex, but this
muxer is needed for doing it in realtime (especially for live
streams that need extra handling for updating the lookahead fields
in the fragment headers).
Using this muxer, one can deliver live smooth streaming from a
normal static file web server. (Using ismindex, one can deliver
premade smooth streaming files from a static file web server,
or prepare files for serving with IIS.)
Signed-off-by: Martin Storsjö <martin@martin.st>
The headers on netbsd are not fully C99 compatible which leads to multiple
definitions of symbols in clang bit not with gcc.
AFAIK this has been fixed in netbsd trunk (didnt check though)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
utvideoenc: Add missing AV_ prefix to codec ID
avserver: Add missing #include for av_gettime()
configure: Only disable aligned stack on MSVC on 32 bit
configure: indentation cosmetics
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Everything written with this bitstream writer is 8/16 bit units
(except for a pair of 4 bit values), so using a bitstream writer
isn't necessary.
Signed-off-by: Martin Storsjö <martin@martin.st>
Generalize writing of any number of qtables. Don't manually write
16 bit values in two separate calls.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently the size header of the generated DHT section is
incorrect, making the mjpeg decoder just skip it. Since the
written huffman tables are the default ones, this failure had
gone undetected.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cus/stable:
ffplay: increase sample array buffer
configure: add crop filter as ffplay requirement
ffplay: ensure that pictq_prev_picture never fills the picture queue
ffplay: simplify picture allocation
ffplay: make initial window size calculation based on aspect ratio
ffplay: factor display rectangle calculation to its own function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A decoded and resampled audio frame may not fit in the current size which is
not handled by the current code causing out of order waveform displays or even
channel mixups. A todo is added because this part can certainly be improved to
consume less memory but work reliably for any frame size.
Signed-off-by: Marton Balint <cus@passwd.hu>
It was theoretically possible for pictq_prev_picture to fill the picture queue
which may have caused problems when a write to the queue was still in progress.
Signed-off-by: Marton Balint <cus@passwd.hu>
This also makes sure the aspect ratio of the picture is set before allocating
the picture, this way video_open can calculate with the correct aspect ratio
even for the first frame.
Signed-off-by: Marton Balint <cus@passwd.hu>
Favor the use of plain AVPicture over AVFrame, especially when the use of
AVFrame is not required like in the case of tmp_picture.
Also adopt more straightforward names, to avoid frame/picture confusion.
* qatar/master:
rtpdec_jpeg: Add support for default quantizers
x86: dsputil: Move specific optimization settings out of global init function
avplay: get rid of ugly casts in the options table
avplay: fix prototypes for option callbacks.
flvdec: always set AVFMTCTX_NOHEADER.
file: Use a normal private context for storing the file descriptor
configure: Adjust the xgetbv instrinsic check
configure: Add --disable-inline-asm command line option
configure: Don't try to enable the log2 function on msvcrt
Conflicts:
configure
ffplay.c
libavcodec/x86/dsputil_mmx.c
libavformat/file.c
libavformat/flvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The assert in decode_mb_b() is replaced by a normal error check for the
case that can occur with a damaged or crafted bitstream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allow to specify options affecting the segment list generation.
In particular: add +live and +cache flags.
For a full discussion read trac ticket #1642:
http://ffmpeg.org/trac/ffmpeg/ticket/1642
Also add live M3U8 generation example.
The 64 bit cl.exe version 16.00.30319.01 crashes with an internal
compiler error on the current check (and thus deduces it isn't
supported, even if the actual usage in libavuil/x86/cpu.c works
fine), but by assigning the value from the intrinsic to a variable,
or returning it, it works fine.
This error is fixed in cl.exe version 16.00.40219.01.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some msvcrt versions (the static 64 bit libc in MSVC 10) have
a log2 function, but there is no declaration for it in the headers.
Therefore, the normal configure check might find it, but it can fail
during build or at runtime, depending on whether implicit function
declarations are an error or not.
Therefore simply ignore this function on this platform.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
x86: dsputil: Only compile motion_est code when encoders are enabled
mem: fix typo in check for __ICC
fate: mp3: drop redundant CMP setting
rtp: Depacketization of JPEG (RFC 2435)
Rename ff_put_string to avpriv_put_string
mjpeg: Rename some symbols to avpriv_* instead of ff_*
yadif: cosmetics
Conflicts:
Changelog
libavcodec/mjpegenc.c
libavcodec/x86/Makefile
libavfilter/vf_yadif.c
libavformat/version.h
libavutil/mem.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Remove pointless default_print_footer() and
default_print_chapter_header() callbacks, also avoid to print an
empty line when noprint_wrappers is selected.
* qatar/master:
swscale: Provide the right alignment for external mmx asm
x86: Replace checks for CPU extensions and flags by convenience macros
configure: msvc: fix/simplify setting of flags for hostcc
x86: mlpdsp: mlp_filter_channel_x86 requires inline asm
Conflicts:
libavcodec/x86/fft_init.c
libavcodec/x86/h264_intrapred_init.c
libavcodec/x86/h264dsp_init.c
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/proresdsp_init.c
libavutil/x86/float_dsp_init.c
libswscale/utils.c
libswscale/x86/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix warning when compiling boxblur.
While this is technically a major API break, practically there will be no
one using that function since the filtering API is mostly private, so
that function alone is not usable.
This reverts parts of e0c6cce447. There is external mmx asm that
requires this alignment.
This fixes crashes when using swscale in builds with external mmx,
without inline assembly.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mov_chan: Only set the channel_layout if setting it to a nonzero value
mov_chan: Reindent an incorrectly indented line
mp2 muxer: mark as AVFMT_NOTIMESTAMPS.
x86: float_dsp: fix ff_vector_fmac_scalar_avx() on Win64
x86: more specific checks for availability of required assembly capabilities
x86: avcodec: Drop silly "_mmx" suffix from dsputil template names
fate: Drop redundant setting of FUZZ to 1
cavsdsp: set idct permutation independently of dsputil
x86: allow using add_hfyu_median_prediction_cmov on any cpu with cmov
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/mp3enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A flashsv2 block may have a "diff block" to indicate which scan lines of
the block are actually encoded. However, this diff block need not be
used when the entire block is coded.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If regularly parsing new chan atoms (as in rtpdec_qt), but the
chan atoms don't actually contain any channel layout, don't reset
the value that the caller has filled in (by guessing).
Signed-off-by: Martin Storsjö <martin@martin.st>
Rather than modify the mplayer filter sources, just disable
vf_mp if inline assembly is not available.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
WINBOOL is MinGW-specific, and since both MSVC and MinGW
have BOOL, use that instead.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
Conflicts:
configure
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
unistd.h is used for open/read/close, but if this header does not
exist, there's probably no use in trying to open /dev/*random
at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mov_chan: Pass a separate AVIOContext for reading
af_asyncts: check return value from lavr when flushing.
mss2: simplify loop in decode_rle()
mss12: avoid unnecessary division in arith*_get_bit()
mss2: do not try to read too many palette entries
mpegvideo: set AVFrame fields to NULL after freeing the base memory
configure: Set the right cc_e flags for msvc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For some reason add_hfyu_median_prediction_cmov is only selected
on 3Dnow-capable CPUs, even though it uses no 3Dnow instructions.
This patch allows it to be selected on any cpu with cmov with the
possibility of being overridden by the mmxext version.
Signed-off-by: Mans Rullgard <mans@mansr.com>
AV_LOG_INFO is more geared towards messages to be read by the user, the
statistics shown by libx264 with X264_LOG_INFO are more useful at the
debugging level.
Help reducing the log spam.
This fixes crashes when called from rtpdec_qt, where
AVFormatContext->pb is null, a crash present since 3bab7cd128.
Signed-off-by: Martin Storsjö <martin@martin.st>
In vp6 Advanced Profile, deblock filtering is conditionally enabled in
each frame header. In Simple Profile it should always be off. vp6 was
inheriting the wrong default from ff_vp56_init.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Print
FOURCC: PIX_FMT
rather than
PIX_FMT: FOURCC
This seems more consistent with the help message:
-l list the pixel format for each fourcc
Remove possibly redundant/confusing comment.
It calculates the sum of power of two series, which can be done in one step.
Suggested by Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
That division can be replaced with a comparison:
((c->value - c->low) << 1) + 1 >= range
By expanding 'range' definition and simplifying this inequation we obtain
the final expression.
Suggested by Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Prevents dangling pointers and makes access after free more obvious.
Setting AVFrame.qscale_table to NULL is required for successfully
allocating a previously freed Picture with ff_alloc_picture().
* qatar/master:
fate: Allow setting the ld parameter from the config file
x86: dsputil: Do not redundantly check for CPU caps before calling init funcs
configure: Disable some warnings in MSVC
x86: vp56: cmov version of vp56_rac_get_prob requires inline asm
avopt: fix examples to match the same style about default values as the actual code.
configure: Add support for MSVC cl.exe/link.exe
lavu: add snprintf(), vsnprint() and strtod() replacements for MS runtime.
Conflicts:
libavutil/opt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit ba53720280.
A better implementation has been commited by the same author to qatar
Conflicts:
configure
Found-by: jamal <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0db2d94280e260af5f3ad7993c5a6357462f17c9':
dsputil: workaround __VA_ARGS__ missing tokenization for MSVC
configure: add section for libc-specific hacks
build: disable ranlib on mingw
parser: Don't use pc as context for av_dlog
h264: Remove an assert on current_picture_ptr being null
Conflicts:
configure
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix a failure when running do_lavfi_pixfmts() for the
lavfi-tinterlace_merge and lavfi-tinterlace_pad tests concurrently.
Since they were using the same names for the temporary files, the first
ending test was removing them, and the second test was failing at
removing unexisting files.
Make do_lavfi_pixfmts() support an user-specified name for the test.
This allows to specify two pixfmts tests for the same filter, e.g. to
test a filter with different parameters. Useful for the pending
tinterlace tests.
Make internal small_strptime() function public, and use it in place of
strptime().
This allows to avoid a dependency on strptime() on systems which do not
support it.
In particular, fix trac ticket #992.
This disables the following warnings:
C4100: unreferenced formal parameter
(1035 occurrances)
C4214: nonstandard extension used : bit field types other than int
(609 occurances)
C4996: 'avpriv_snprintf': This function or variable may be unsafe.
Consider using _snprintf_s instead. To disable deprecation,
use _CRT_SECURE_NO_WARNINGS. See online help for details.
(351 occurrances)
Signed-off-by: Martin Storsjö <martin@martin.st>
FFT in MIPS implementation is working iteratively instead
of "recursively" calling functions for smaller FFT sizes.
Some of DSP and format convert utils functions are also optimized.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Reviewed-by: Vitor Sessak <vitor1001@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using ranlib is not required but prevents using the libraries with
msvc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
build: eamad: Add missing dependency on mpegvideo code
build: utvideoenc: Add missing dependency on Huffman code
avopt: Reorder the default_val struct, making i64 the first field
Conflicts:
configure
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd58dd4b5b5d31cfd4092e38a5f2c894eee2ab078':
avopt: Store defaults for AV_OPT_TYPE_FLAGS in the i64 union member
Conflicts:
libavcodec/libvpxenc.c
libavcodec/options_table.h
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '124134e42455763b28cc346fed1d07017a76e84e':
avopt: Store defaults for AV_OPT_TYPE_CONST in the i64 union member
Conflicts:
libavcodec/aacenc.c
libavcodec/libopenjpegenc.c
libavcodec/options_table.h
libavdevice/bktr.c
libavdevice/v4l2.c
libavdevice/x11grab.c
libavfilter/af_amix.c
libavfilter/vf_drawtext.c
libavformat/movenc.c
libavformat/options_table.h
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d7d91f06d6a1d243dc74c96d3389ee237a3b906':
svq1enc: Set picture_structure correctly
mpegvideo: remove last_picture_ptr / h264 assert.
mpegvideo_enc: remove assert that has become obsolete with the new API
elbg: Fix an assert
Conflicts:
libavcodec/elbg.c
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is possible in various error paths as well as gap handling
that this has already been allocated. It is not clear why that
would be a problem with the current code, thus disable the
assert to avoid a common assert failure when asserts are enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
Evaluating it multiple times, can have side effects and is possibly slow.
So its definitly a bad idea.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: add support for bdver1 and bdver2 CPU types.
avio: make avio_close NULL the freed buffer
pixdesc: cosmetics
proresenc: Don't free a buffer not owned by the codec
proresenc: Write the full value in one put_bits call
adpcmenc: Calculate the IMA_QT predictor without overflow
x86: Add convenience macros to check for CPU extensions and flags
x86: h264dsp: drop some unnecessary ifdefs around prototype declarations
mss12: merge decode_pixel() and decode_top_left_pixel()
mss12: reduce SliceContext size from 1067 to 164 KB
mss12: move SliceContexts out of the common context into the codec contexts
Conflicts:
libavformat/aviobuf.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The data in coded_frame isn't allocated using get_buffer, but
is copied from the input frame to the encoder, so we should
not try to free it ourselves.
This fixes an assert failure when running in debug mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, the put_bits call writing the value wrote a value
larger than the number of bits specified, failing asserts
in debug mode. There was no actual bitstream writer corruption,
since the overwritten bit already always was set to 1.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, the value given to put_bits was 10 bits long for positive
predictors, even though 9 bits were to be written. The extra bit could
in some cases overwrite existing bits in the bitstream writer cache.
This fixes a failed assert in put_bits.h, when running a version
built with -DDEBUG.
The fate test result gets slightly improved, thanks to getting rid
of the overwritten bits in the bitstream writer cache.
Signed-off-by: Martin Storsjö <martin@martin.st>
This may need some trial and error to find exactly how to identify them
so please report any intel jpegs that get fliped wrong.
Fixes Ticket511
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While not that usefull, we can as well keep it until it breaks.
When it breaks for whatever reason ill likely remove it
Sorry for the revert spam, i had not realized this code compiles
and works fine.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: avcodec: order cosmetics
intrax8dsp: Add missing #include to make header standalone
Delete motion-test tool; it is of doubtful utility.
Conflicts:
libavcodec/Makefile
libavcodec/motion-test.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In avfilter_config_links(), if the current channel layout is not
specified, set the same value of the previous link in the filterchain.
Consistent with the logic used to set the other link parameters.
This fixes stream lookup in flv demuxer. When used with librtmp
protocol streams are sometimes added after head arrived. If the
first stream added in flv header reader is Audio stream then it
is messed with Video stream added later in the code patched.
The result is I have 2 Audio streams (first of them is said to have
a video codec like h264) instead of Audio/Video pair.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
ffplay: only free vfilters on exit
ffplay: replace SDL_delay in read thread with SDL_CondWait
ffplay: requeue last picture on forced video refresh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
crypto: Remove a stray double space
Rename missed cases of FF_OPT_TYPE_* to AV_OPT_TYPE_*
Conflicts:
libavfilter/vf_delogo.c
libavfilter/vf_lut.c
libavfilter/vsrc_testsrc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With this change avconv compiled against libav and linked to ffmpegs libs
will run through the whole fate testsuite without any crashes.
857 tests pass, the remaining tests fail one way or another, which is
to be expected as avconv is not a drop in replacement for ffmpeg
The testsuite used was the ffmpeg fate testsuite, not libavs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
After much discussion and back-and-forth, we reached the conclusion
that matroska uses convergence_duration for subtitle duration because
a 32bit value isn't large enough to store the duration if sub-micro-second
timebases are used. Matroska may not be the only one that supports these
timebases, but it's certainly the only one that ffmpeg attempts to support
in this way.
The long term solution that we seemed to reach was that if we encounter
a matroska file with a sub-micro-second timebase, we should internally
scale it up to at least micro-second, and then duration can be used
normally. This suggests that on the encode side, we should not allow
generation of files with sub-micro-second timebases, but that's a separate
issue.
That being a non-trivial change, and the subtitle interoperability breakage
being very real, I'm re-submitting this small change for consideration.
In this diff, we make sure that duration is populated by the matroska
demuxer, and that convergence_duration is respected in matroskaenc and
srtenc, but that duration is used otherwise. This ends up being a strict
improvement - pipelines that use convergence duration are unchanged, and
ones that are currently broken due to the duration mismatch will start
working - except for the ones with the extreme timebases, but those were
already broken.
Signed-off-by: Philip Langdale <philipl@overt.org>
Freeing it in the end of the video thread is not a good idea, because we still
may need the filter names for the next video thread, in order to apply the
filters after chaning the video stream.
Signed-off-by: Marton Balint <cus@passwd.hu>
When the audio queue was empty, it was not filled until the 10ms delay expired
in the read thread. This patch changes the delay method with a condition wait,
which reacts to an empty queue a lot faster, therefore the audio buffer
underruns become less common especially after seeking.
Signed-off-by: Marton Balint <cus@passwd.hu>
This fixes playback of DVB subtitles in
http://samples.ffmpeg.org/ffmpeg-bugs/trac/ticket1065/Test1.wtv
in MPlayer.
FFplay is not affected since it assumes that the subtitles
are scaled to match the video - but this usually isn't the
case after rescaling the video and stream-copying subtitles.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Closed caption data is definitely not teletext.
Since it contains a EIA-608 compatibility stream,
the EIA_608 codec ID is at least not completely wrong.
Fixes subtitle playback in MPlayer with the sample in
trac ticket #1482.
To fix the ticket itself I expect FFmpeg will need
a closed-caption to SRT decoder first.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This allows dynamic reconfiguration of the filter.
The callback uses some code that was in the init function. Hence this code
has been moved in its own function.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Set x offset values in the range 0-7, rather than in the range 8-1.
The y loop is changed accordingly, to avoid confusion.
This also fixes output difference with the new pending native decimate
filter.
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec36aa69448f20a78d8c4588265022e0b2272ab5':
x86: Fix linking with some or all of yasm, mmx, optimizations disabled
configure: Add more fine-grained SSE CPU capabilities flags
avfilter: x86: Use more precise compile template names
x86: cosmetics: Comment some #endifs for better readability
g723_1: add comfort noise generation
utvideoenc: Switch to dsputils' median prediction
utvideoenc: Avoid writing into the input picture
avtools: remove the distinction between func_arg and func2_arg.
avconv: make the -passlogfile option per-stream.
avconv: make the -pass option per-stream.
cmdutils: make -codecs print lossy/lossless flags.
lavc: add lossy/lossless codec properties.
Conflicts:
Changelog
cmdutils.c
configure
doc/APIchanges
ffmpeg.h
ffmpeg_opt.c
ffprobe.c
libavcodec/codec_desc.c
libavcodec/g723_1.c
libavcodec/utvideoenc.c
libavcodec/version.h
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/rv40dsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way it won't interfere with WMV9 initialisation inside MSS2 decoder and
avplay will play it fine.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
This is necessary to avoid spuriously enabling _external or _inline
variants of arch extensions when they should be disabled.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The cpia video decoder is intended to be used with the v4l2 demuxer.
There are some small changes to the v4l2 demuxer to support the
variable frame length of the format.
Fixes ticket #1537
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This improves dts validity checks and consequently fps detection of files with invalid dts
Fixes Ticket1681
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
PATH_MAX is not necessarily available on all systems, e.g. it's
normally not available on MSVC, and is not guaranteed to defined
on a POSIX system either.
Signed-off-by: Martin Storsjö <martin@martin.st>
This takes care of null-terminating the buffer if it is too small,
which wasn't handled properly before.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also change the snprintf size to use the full buffer, since
snprintf always null-terminates the buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
In case CFLAGS/LDLIBS are already defined and conflicting with the
pkg-config flags, give priority to the latter since they are used to
detect compilation flags.
This should fix for example the case where there are many different
instances of a library, CFLAGS=-I/foo/include and pkg-config cflags say
-I/bar/include.
Also, align the mangled RGB planes, which is required for the
SIMD versions of dsputils' median predict.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: allow non-standard variations of linker -l/-L flags
Add reminders to update the codec descriptor list with new codec IDs.
Conflicts:
Makefile
configure
libavcodec/avcodec.h
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
There is a remaining error of 2 - 8 samples in some but not all cases,
the source of the error is unknown ATM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Memory obtained from av_realloc is not aligned enough for AVX.
The other similar allocations are changed too because they use
the same macro. The buffers were cleared afterwards anyway.
Fix trac ticket #1692.
* qatar/master:
build: export filtered -lz flag in config.mak
build: add separate setting for host linker
configure: probe_cc: use separate variable for linker output flag
x86: Always compile files with functions that are called unconditionally
x86: mpegvideoenc: fix linking with --disable-mmx
x86: mpegvideoenc: Do not abuse HAVE_ variables for template instantiation
Conflicts:
Makefile
configure
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd488c3bcbaf7ddda42597e014deb661a7e9e2112':
configure: support Bitrig OS
yuv2rgb: handle line widths that are not a multiple of 4.
graph2dot: Use the fallback getopt implementation if needed
tools: Include io.h for open/read/write/close if unistd.h doesn't exist
testprogs: Remove unused includes
qt-faststart: Use other seek/tell functions on MSVC than on mingw
ismindex: Include direct.h for _mkdir on windows
sdp: Use static const char arrays instead of pointers to strings
x86: avcodec: Drop silly "_mmx" suffixes from filenames
x86: avcodec: Drop silly "_sse" suffixes from filenames
sdp: Include profile-level-id for H264
utvideoenc: use ff_huff_gen_len_table
huffman: add ff_huff_gen_len_table
cllc: simplify/fix swapped data buffer allocation.
rtpdec_h264: Don't set the pixel format
h264: Check that the codec isn't null before accessing it
audio_frame_queue: Define af_queue_log_state before using it
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/h264.c
libavcodec/huffman.h
libavcodec/huffyuv.c
libavcodec/utvideoenc.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This enables replacing the -l and -L flags used to specify the
just-built libraries when linking the tools and shared libs with
non-standard syntaxes. System library flags are already handled
by the filtering mechanism in configure.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Some tools use different command line syntax for specifying output
when compiling and linking. To accomodate these, separate variables
must be used. No currently supported compilers/linkers are affected
by the change.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This patch accepts 'timeout' option for input mode only. As far as i know, UDP output cannot introduce delays.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The optimized dct_quantize template functions reference optimized
fdct symbols, so these functions must only be enabled if the relevant
optimizations have been enabled by configure.
If set non-zero, limits duration of retry_transfer_wrapper() loop, thus
affects ffurl_read*(), ffurl_write()
Measured in microseconds.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This introduces support for width%4==2 in addition to width%4==0. For
odd widths, some more checks are needed, since the current code always
handles two luma items in a row, thus there is a possibility of an
overread by one.
The Windows SDK in MSVC doesn't have mkdir, only _mkdir, and
MSDN says one should include direct.h to use it.
Signed-off-by: Martin Storsjö <martin@martin.st>
This example should be useful to show the basic functionality of the
libswscale API.
More advanced features (scaling options etc., colorspace tweaking) may be
added later.
This is a port of the MPlayer smartblur filter (libmpcodecs/vf_smartblur.c)
by Michael Niedermayer.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Eliminating finished streams avoids the progress stopping
with the first stream.
Using the max instead of the min avoids the progress stopping
with gaps in sparse streams (subtitles).
Negligible change for normal circumstances.
Using the malloc variant avoids pointless memcpy on size
increase and simplifies handling allocation failure.
Also change code to ensure that allocation, bswap and bitstream
reader all use the same size, even when the packet size is odd
for example.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This fixes building with DEBUG defined after the function was made
static and the prototype removed in d7f9786cbc.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
vc1: export some functions
configure: use HOSTCC_C/O in check_host_cc
configure: use AS_O setting in check_as
configure: use LD_O setting in check_ld()
Revert "dsputil: make {add/put/put_signed}_pixels_clamped() non-static."
build: Restore dependency of acelp_filters.o on celp_math.o
celp_math: Replace duplicate ff_dot_productf() by ff_scalarproduct_c()
celp_math: Move ff_cos() to the only place it is used
build: Use portable abstraction for linker/hostcc output file syntax
configure: Fix shared library creation for OpenBSD
vp56: Don't use DECLARE_ALIGN on a typedef name
mss1: move code that will be reused by MSS2 decoder into separate file
mss1: merge decode_intra() and decode_inter()
avprobe: Get rid of ugly casts in the options table
vf_hqdn3d: Remove a duplicate inline declaration
Conflicts:
Makefile
configure
ffprobe.c
libavcodec/Makefile
libavcodec/amrnbdec.c
libavcodec/amrwbdec.c
libavcodec/celp_math.c
libavcodec/celp_math.h
libavcodec/dsputil.c
libavcodec/lsp.c
libavcodec/mss1.c
libavcodec/ra288.c
libavcodec/vc1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Extract of the output:
| Individual channels:
| NAME DESCRIPTION
| FL front left
| FR front right
| <snip>
| SDR surround direct right
|
| Standard channel layouts:
| NAME DECOMPOSITION
| mono FC
| stereo FL+FR
| <snip>
| octagonal FL+FR+FC+BL+BR+BC+SL+SR
| downmix DL+DR
Instead, use it on the first member, since by definition, if
any member is aligned, the whole struct must be, in order to
maintain that alignment.
Fixes compilation with some finicky compilers, like a mix of libclang/msvc
Idea for fix from Måns Rullgård.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a preparatory step for the MSS2 decoder which needs to use
the WMV9 decoder to decode some kinds of frames.
From the patch by Alberto Delmás <adelmas@gmail.com>
This reverts commit 484a337cd7.
These functions were used in f8bed30 "VC1: merge idct8x8, coeff
adjustments and put_pixels" which was reverted in 18b6a69.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Instead, use it on the first member, since by definition, if
any member is aligned, the whole struct must be, in order to
maintain that alignment.
Fixes compilation with some finicky compilers.
Idea for fix from Måns Rullgård.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Implements support for tmpo atom for mp4 files, typically used to store BPM. -metadata "tmpo=127" as a command line option will record 127 as the BPM in the meta data.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the malloc variant avoids pointless memcpy on size
increase and simplifies handling allocation failure.
Also change code to ensure that allocation, bswap and bitstream
reader all use the same size, even when the packet size is odd
for example.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Rewrite 10 bit dpx decoder to decode into GBRP10 color space
instead of converting to RGB48.
Add 12 bit decoder to decode into GBRP12 color space.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also makes sure the function pointers are stored via the same
union member as they are accessed via.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
vf_hqdn3d: Don't declare the loop variable within the for loop
huffyuv: update to current coding style
huffman: update to current coding style
rtsp: Free the rtpdec context properly
build: fft: x86: Drop unused YASM-OBJS-FFT- variable
Conflicts:
libavcodec/huffman.c
libavcodec/huffyuv.c
libavcodec/x86/Makefile
libavfilter/vf_hqdn3d.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This C99 feature is generally not used in the libav codebase,
since it breaks building with some fringe compilers (GCC 2.95,
MSVC).
Signed-off-by: Martin Storsjö <martin@martin.st>
Do not clutter the temporary directory with files, also "/tmp" is not
always available, e.g. in Windows.
Also add the clean-test Makefile rule, which will clean the generated
files.
* qatar/master:
audio_frame_queue: Clean up ff_af_queue_log_state debug function
dwt: Remove unused code.
cavs: convert cavsdata.h to a .c file
cavs: Move inline functions only used in one file out of the header
cavs: Move data tables used in only one place to that file
fate: Add a single symbol Ut Video decoder test
vf_hqdn3d: x86 asm
vf_hqdn3d: support 16bit colordepth
avconv: prefer user-forced input framerate when choosing output framerate
Conflicts:
ffmpeg.c
libavcodec/audio_frame_queue.c
libavcodec/dwt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
While not explicitly stated in the specs, the original author
has stated that S_TEXT/UTF-8 is expected to be text using Subrip
markup, but without Subrip in-band timing.
So, now that we have a decoder that conforms to this expectation,
let's use it.
Note that this change will impact tools that use libavformat. If
they expect srt subtitles to have CODEC_ID_TEXT, they must be
adjusted to expect CODEC_ID_SUBRIP. The actual content is, obviously,
unchanged.
Signed-off-by: Philip Langdale <philipl@overt.org>
The bitstream buffer must be padded, or the bitstream reader might
read over the end.
Fixes the following valgrind warning:
Use of uninitialised value of size 8 at 0x591BAE: cllc_decode_frame (cllc.c:166)
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* qatar/master:
utvideodec: Fix single symbol mode decoding
truespeech: drop useless casts
libavcodec: drop bogus dependencies from mpc[78] and qdm2
mpegaudio: move ff_mpa_enwindow to a separate file
AVOptions: store defaults for INT64 options in int64 union member.
Conflicts:
libavcodec/Makefile
libavfilter/af_asyncts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a1bcc76e6036e78f25cbb7323c145056cfca9d93': (21 commits)
cmdutils: fix a memleak when specifying an option twice.
x86: mpegvideo: more sensible names for optimization file and init function
x86: mpegvideoenc: Split optimizations off into a separate file
dnxhdenc: x86: more sensible names for optimization file and init function
svq1/svq3: Move common code out of SVQ1 decoder-specific file
dirac: add Comments and references to the standard
lavr: x86: optimized 6-channel flt to fltp conversion
lavr: x86: optimized 2-channel flt to fltp conversion
lavr: x86: optimized 6-channel flt to s16p conversion
lavr: x86: optimized 2-channel flt to s16p conversion
lavr: x86: optimized 6-channel s16 to fltp conversion
lavr: x86: optimized 2-channel s16 to fltp conversion
lavr: x86: optimized 6-channel s16 to s16p conversion
lavr: x86: optimized 2-channel s16 to s16p conversion
lavr: x86: optimized 2-channel fltp to flt conversion
lavr: x86: optimized 6-channel fltp to s16 conversion
lavr: x86: optimized 2-channel fltp to s16 conversion
lavr: x86: optimized 6-channel s16p to flt conversion
lavr: x86: optimized 2-channel s16p to flt conversion
lavr: x86: optimized 6-channel s16p to s16 conversion
...
Conflicts:
libavcodec/dirac.c
libavcodec/mpegvideo.h
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Put the zero length check in place of code that was never used
during decoding, as zero-length slices were generally refused
in decode_frame().
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
This table is used only by mpegaudiodsp and mpegaudioenc. Separating
it allows dropping some dependencies from mpc[78] and qdm2.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
doc/APIchanges: add an entry for codec descriptors.
vorbisenc: set AVCodecContext.bit_rate to 0
vorbisenc: fix quality parameter
FATE: add ALAC encoding tests
lpc: fix alignment of windowed samples for odd maximum LPC order
alacenc: use s16p sample format as input
alacenc: remove unneeded sample_fmt check
alacenc: fix max_frame_size calculation for the final frame
adpcm_swf: Use correct sample offsets when using trellis.
rtmp: support strict rtmp servers
mjpegdec: support AVRn interlaced
x86: remove FASTDIV inline asm
Conflicts:
doc/APIchanges
libavcodec/mjpegdec.c
libavcodec/vorbisenc.c
libavutil/x86/intmath.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is essential for fast SIMD accesses.
The same should be done with the predict output.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
19% faster
smaller files
this may also fix possible integer overflows due to previous 32bit useage
Tested with libutvideo and our utvideo decoder, this patch does not change
decoder output in the test
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In order to send or receive a stream FCPublish, FCSubscribe and _checkbw
are completely optional and often not implemented. releaseStream over a
non-existen stream might report an error instead of being silent.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
GCC 4.3 and later do the right thing with the plain C code. Earlier
versions in 32-bit mode generate one extra instruction, needlessly
zeroing what would be the high half of the shifted value. At least
two gcc configurations miscompile the inline asm in some situations.
In 64-bit mode, all gcc versions generate imul r64, r64 followed by
shr. On Intel i7 and later, this imul is faster 32-bit mul. On
older Intel and all AMD, it is slightly slower. On Atom it is much
slower.
Considering where the FASTDIV macro is used, any overall negative
performance impact of this change should be negligible. If anyone
cares, they should file a bug against gcc and get the instruction
selection fixed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
build: x86: Only compile mpegvideo optimizations when necessary
configure: Drop fastdiv option
build: Make the E-AC-3 encoder select the AC-3 encoder
fate: flac: Only run tests requiring samples when samples are available
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix warnings:
muxing.c: In function ‘write_video_frame’:
muxing.c:326:23: warning: passing argument 2 of ‘sws_scale’ from incompatible pointer type [enabled by default]
There is no point in having the user disable any fastdiv macros.
Besides the condition implementation was broken and only disabled
the C implementation, but no platform specific assembly versions.
Pass pointer to sample buffer instead of channel number to various
functions called from decode_subframe(). Also simplify a few
expressions within this function.
The failures on various architectures and compilers on the RGB(A)
tests seem to have been because of one-off YCbCr->RGB conversion
results. This should make the conversion results match on most if
not all code paths.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The failures on various architectures and compilers on the RGB(A)
tests seem to have been because of one-off YCbCr->RGB conversion
results. This should make the conversion results match on most if
not all code paths.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Compilation failed since commit 42d621d131
Error messages:
libavfilter/af_asyncts.c:249:5: error: initializer element is not
computable at load time
libavfilter/af_asyncts.c:249:5: error: (near initialization for
‘avfilter_af_asyncts.priv_size’)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Add FATE tests for the Ut Video encoder
lavc: add Ut Video encoder
mpegvideo_enc: remove stray duplicate line from 7f9aaa4
swscale: x86: fix #endif comments in rgb2rgb template file
avconv: mark more options as expert.
avconv: split printing "main options" into global and per-file.
avconv: refactor help printing.
Conflicts:
Changelog
ffmpeg_opt.c
ffserver.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7c5012127fb7e18f0616011257bb4248f6a8b608':
cmdutils: change semantics of show_help_options() and document it.
avtools: move some newlines to show_help_options().
avconv: deprecate -isync.
Conflicts:
ffmpeg_opt.c
ffserver.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd3810c47fe8c9509c28c65c0244e743c1d353daf':
avconv: get rid of ugly casts in the options table.
avconv: try to match codecs by codec descriptor name as a last resort.
avtools: fix show_foo() signatures.
Conflicts:
cmdutils.c
cmdutils.h
cmdutils_common_opts.h
ffmpeg_opt.c
ffplay.c
ffprobe.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The special cases in demuxers and decoders are a mess otherwise (and more
would be needed to support it fully)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Currently it takes a mask and value, such that options for which
(flags & mask) == value.
Change it to take required flags and forbidden flags instead. This is
shorter and simpler to understand.
Rework the transcode() function and its immediate annexes to have
the same structure as in avconv, while still maintaining proper
scheduling to avoid accumulation.
Using -filter_complex without inputs now works.
The h264_vdpau decoder crashed if output colorspace was not 8-bit 420.
Add a check to error out instead (current hardware does not support
other colorspaces, so successful decoding is not possible).
Check implemented at a different place by michael, thus blame for bugs goes to michael
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo_enc: don't use deprecated avcodec_encode_video().
cmdutils: refactor -codecs option.
avconv: make -shortest a per-output file option.
lavc: add avcodec_descriptor_get_by_name().
lavc: add const to AVCodec* function parameters.
swf(dec): replace CODEC_ID with AV_CODEC_ID
dvenc: don't use deprecated AVCODEC_MAX_AUDIO_FRAME_SIZE
rtmpdh: Do not generate the same private key every time when using libnettle
rtp: remove ff_rtp_get_rtcp_file_handle().
rtsp.c: use ffurl_get_multi_file_handle() instead of ff_rtp_get_rtcp_file_handle()
avio: add (ff)url_get_multi_file_handle() for getting more than one fd
h264: vdpau: fix crash with unsupported colorspace
amrwbdec: Decode the fr_quality bit properly
Conflicts:
Changelog
cmdutils.c
cmdutils_common_opts.h
doc/ffmpeg.texi
ffmpeg.c
ffmpeg.h
ffmpeg_opt.c
libavcodec/h264.c
libavcodec/options.c
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This filter is inspired upon libmpcodecs/vf_framestep.c, by Daniele
Forghieri.
Only-keyframe output is not supported, since that feature can be achieved
through the more versatile select filter.
This is due to the design of components iteration through AVClass
child_class_next() callback, which requires that two components cannot
share the same class.
Replace mpz_random by mpz_urandomb with a random state initialization in
order to improve the randomness.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also print a warning if neither quality nor bitrate is specified
and use the libvpx default bitrate in this case.
The idea of using the default bitrate is from Luca Barbato
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The h264_vdpau decoder crashed if output colorspace was not 8-bit 420.
Add a check to error out instead (current hardware does not support
other colorspaces, so successful decoding is not possible).
Signed-off-by: Martin Storsjö <martin@martin.st>
The way this bit is decoded was accidentally flipped in b70feb405,
leading to warnings "Encountered a bad or corrupted frame" for each
decoded frame.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add files created for MP3 optimization that have MIPS copyright
notice in them to list of files in mips.txt.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For some compilers ISA older than mips32r2 is set as default.
Because of them assembler flag "-mips32r2" needs to be added
for CPUs that support mips32r2 ISA in part of configure script
where ISA capabilities are checked.
"-mhard-float" assembler flag is also added for CPUs that have FPU.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libvpxenc: use the default bitrate if not set
utvideo: Rename utvideo.c to utvideodec.c
doc: Fix syntax errors in sample Emacs config
mjpegdec: more meaningful return values
configure: clean up Altivec detection
getopt: Remove an unnecessary define
rtmp: Use int instead of ssize_t
getopt: Add missing includes
rtmp: Add support for receiving incoming streams
Add missing includes for code relying on external libraries
Conflicts:
libavcodec/libopenjpegenc.c
libavcodec/libvpxenc.c
libavcodec/mjpegdec.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
There used to be one test for Altivec intrinsics support and a
separate test to determine which of two possible syntaxes to use
for vector literals. Since 2008, we only support the more common
of these so the split test no longer makes sense.
This combines the tests into one and also changes the hard error on
failure to a warning. The test can reasonably fail if no --cpu flag
is provided (or is provided with an unknown CPU) and the compiler
default target does not support Altivec. Aborting in this case is
probably over-reacting.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This function is problematic in several ways, its also quite
unpredictable which flags it ends up turning on
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Not all compilers support ssize_t (MSVC doesn't), and none of these
variables need to be larger than 32 bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
Fix even more missing includes after the common.h removal
build: Factor out rangecoder dependencies to CONFIG_RANGECODER
build: Factor out error resilience dependencies to CONFIG_ERROR_RESILIENCE
x86: avcodec: Consistently name all init files
Add more missing includes after removing the implicit common.h
Add some more missing includes after removing the implicit common.h
Don't include common.h from avutil.h
rtmp: Automatically compute the hash for SWFVerification
Conflicts:
configure
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/Makefile
libavcodec/assdec.c
libavcodec/audio_frame_queue.c
libavcodec/avpacket.c
libavcodec/dv_profile.c
libavcodec/dwt.c
libavcodec/libtheoraenc.c
libavcodec/rawdec.c
libavcodec/rv40dsp.c
libavcodec/tiff.c
libavcodec/tiffenc.c
libavcodec/v210dec.h
libavcodec/vc1dsp.c
libavcodec/x86/Makefile
libavfilter/asrc_anullsrc.c
libavfilter/avfilter.c
libavfilter/buffer.c
libavfilter/formats.c
libavfilter/vf_ass.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_select.c
libavfilter/video.c
libavfilter/vsrc_testsrc.c
libavformat/version.h
libavutil/audioconvert.c
libavutil/error.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The logic here was off. If the packet size is exactly two, then
it's a well-formed empty subtitle, used to mark the end of the
duration of the previous subtitle.
Signed-off-by: Philip Langdale <philipl@overt.org>
Unsurprisingly, if a timing-less subrip decoder is desireable, an
encoder is as well. With this in place, we can move on to remove
the use of the old encoder/decoder with embedded timing and move
all timing handling the (de)muxer where they belong.
Signed-off-by: Philip Langdale <philipl@overt.org>
After various discussions, we concluded that, amongst other things,
it made sense to have a separate subrip decoder that did not use
in-band timing information, and rather relied on the ffmpeg level
timing.
As this is 90% the same as the existing srt decoder, it's implemented
in the same file.
Signed-off-by: Philip Langdale <philipl@overt.org>
There are currently no statements from any person qualified in the art
of law about the LGPL compatibility of the libfaac license and others.
Furthermore their is no consensus about their compatibility amongth
people not qualified in the art.
Also of interrest may be that ubuntu distributes and links libfaac
to LGPL code. And the ubuntu technical comittee decision about libfaac
https://lists.ubuntu.com/archives/technical-board/2011-February/000703.html
Comments and other viewpoints, especially if i have missed something
are very welcome!
Reviewed-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Reviewed-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
this crashes otherwise, and can happen from try_decode_frame() in the case of decoding errors
Fixes Ticket1602
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add support for SWFVerification
api-example: use new video encoding API.
x86: avcodec: Appropriately name files containing only init functions
mpegvideo_mmx_template: drop some commented-out cruft
libavresample: add mix level normalization option
w32pthreads: Add missing #includes to make header compile standalone
rtmp: Gracefully ignore _checkbw errors by tracking them
rtmp: Do not send _checkbw calls as notifications
prores: interlaced ProRes encoding
Conflicts:
doc/examples/decoding_encoding.c
libavcodec/proresenc_kostya.c
libavcodec/w32pthreads.h
libavcodec/x86/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specifies how the server verifies client SWF files before allowing the
files to connect to an application. Verifying SWF files is a security
measure that prevents someone from creating their own SWF files that can
attempt to stream your resources.
Signed-off-by: Martin Storsjö <martin@martin.st>
The _checkbw calls were changed to use transactionId 0 in commit
82613564 so that servers would not return _result/_error about it.
While this is the strict interpretation of the spec, there are
servers that return _error about it, even if transactionId was 0.
The latest version of EvoStream Media Server (the commercial version
of crtmpserver) behaves properly as described, i.e. returning an
_error normally but not returning anything when using transactionId
0. The latest version of crtmpserver (right now at least) doesn't
behave like this though, it returns an error even if transactionId
was 0.
There are also other servers that return errors even if transactionId
is set to 0. Therefore set a proper transaction id so that the invoke
can be tracked and the error properly ignored instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function is always called with a non-negative argument, so
those special cases are not needed. In the places the argument
might be zero, the return value for a zero argument does not matter
since it would then be used to scale an array full of zeros.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Note that the symbols used to run the hardware decoder in asynchronous mode
have been marked deprecated and will be dropped at a future version bump.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
There are several reasons for doing that:
1. It documents the code for the reader and helps find
inconsistencies and bugs.
2. For rej_perms, it guarantees the change will be done
even if the output reference can be created by several
code paths.
3. It can be used to predict cases where a copy will,
or will not happen and optimize buffer allocation
(for example not request a rare direct-rendering buffer
from a device sink if it will be copied anyway).
Note that a filter is still allowed to manage the permissions
on its own without using these fields.
The resolution is in the packets, so decoding must happen.
Since most other formats do not set the dimension, make it
a special case for PGS. If other codecs were to have the
same requirement, using a CODEC_CAP would be preferred.
DVD subtitles packets can only encode a single rectangle:
if there are several, copy them into a big transparent one.
DVD subtitles rely on an external 16-colors palette:
use a reasonable default one, stored in the private context,
and encode it into the extradata, as specified by Matroska.
TODO: allow to change the palette with an option.
Each packet can use four colors out of the global palette.
The old logic was to map transparent colors to the color 0
and all other colors to 3, 2, 1, cyclically in descending
frequency order, completely disregarding the original color.
Select the "best" four colors from the global palette, according
to heuristics based on frequency, opacity and brightness, and
arrange them in standard DVD order: background, foreground,
outline, other.
TODO: select the alpha value more finely; see if CHG_COLCON can
allow more than 4 colors per packet.
Reference:
http://dvd.sourceforge.net/dvdinfo/spu.html
With these changes, dvdsubenc can be used to transcode DVB subtitles
and get a very decent result.
Note that the symbols used to run the hardware decoder in asynchronous mode
has been marked as deprecated and will be dropped at a future version dump.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
To access data at multiple fixed offsets from a base address, this
code uses a single "m" operand and code of the form "32%0", relying on
the memory operand instantiation having no displacement, giving a final
result of the form "32(%rax)". If the compiler uses a register and
displacement, e.g. "64(%rax)", the end result becomes "3264(%rax)",
which obviously does not work.
Replacing the "m" operands with "r" operands allows safe addition of a
displacement. In theory, multiple memory operands could use a shared
base register with different index registers, "(%rax,%rbx)", potentially
making more efficient use of registers. In the cases at hand, no such
sharing is possible since the addresses involved are entirely unrelated.
After this change, the code somewhat rudely accesses memory without
using a corresponding memory operand, which in some cases can lead to
unwanted "optimisations" of surrounding code. However, the original
code also accesses memory not covered by a memory operand, so this is
not adding any defect not already present. It is also hightly unlikely
that any such optimisations could be performed here since the memory
locations in questions are not accessed elsewhere in the same functions.
This fixes crashes with suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Under some circumstances, suncc will use a single register for the
address of all memory operands, inserting lea instructions loading
the correct address prior to each memory operand being used in the
code. In the yadif code, the branch in the asm block bypasses such
an lea instruction, causing an incorrect address to be used in the
following load.
This patch replaces the tmpX arrays with a single array and uses a
register operand to hold its address. Although this prevents using
offsets from the stack pointer to access these locations, the code
still builds as 32-bit PIC even with old compilers.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This fixes two issues preventing suncc from building this code.
The undocumented 'a' operand modifier, causing gcc to omit a $ in
front of immediate operands (as required in addresses), is not
supported by suncc. Luckily, the also undocumented 'c' modifer
has the same effect and is supported.
On some asm statements with a large number of operands, suncc for no
obvious reason fails to correctly substitute some of the operands.
Fortunately, some of the operands in these statements are plain
numbers which can be inserted directly into the code block instead
of passed as operands.
With these changes, the code builds correctly with both gcc and
suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This code contains a C array of addresses of labels defined in
inline asm. To do this, the names must be declared as external
in C. The declared type does not matter since only the address is
used, and for some reason, the author of the code used the 'void'
type despite taking the address of a void expression being invalid.
Changing the type to char, a reasonable choice since the alignment
of the code labels cannot be known or guaranteed, eliminates gcc
warnings and allows building with suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
many branches and cases of scale_vector are irrelevant for the case here
and by inlining they can be reliably removed.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It appears someone thinks this special case can be reached
Well, it cannot, thus not only do we not need to optimize it
we dont need it at all
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
g723.1: do not pass large structs by value
g723.1: do not bounce intermediate values via memory
g723.1: declare a variable in the block it is used
g723.1: avoid saving/restoring excitation
g723.1: avoid unnecessary memcpy() in residual_interp()
g723.1: make postfilter write directly to output buffer
g723.1: drop unnecessary variable buf_ptr in formant_postfilter()
g723.1: make scale_vector() output to a separate buffer
g723.1: make autocorr_max() work on an arbitrary buffer
g723.1: do not needlessly use int64_t
g723.1: use saturating addition functions
g723.1: optimise scale_vector()
g723.1: remove useless uses of MUL64()
g723.1: remove unnecessary argument 'shift' from dot_product()
g723.1: deobfuscate "(x << 4) - x" to "15 * x"
celp: optimise ff_celp_lp_synthesis_filter()
libavutil: add saturating addition functions
cllc: Implement ARGB support
cllc: Add support for QRGB
cllc: Rename some funcs to represent what they actually do
...
Conflicts:
LICENSE
libavcodec/g723_1.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow to select specific documentation components, and reliably check for
component dependencies.
In particular, check for perl presence on the system.
This is a port of the MPlayer hue filter (libmpcodecs/vf_hue.c) by
Michael Niedermayer.
Signed-off-by: Jérémy Tran <tran.jeremy.av@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Although a reasonable compiler will probably optimise out the
actual store and load, this operation still implies a truncation
to 16 bits which the compiler will probably not realise is not
necessary here.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Writing the scaled excitation to a scratch buffer (borrowing the
'audio' array) instead of modifying it in place avoids the need
to save and restore the unscaled values.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Use saturating addition functions instead of 64-bit intermediates
and separate clipping. This is much faster when dedicated
instructions are available.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Firstly, nothing in this function can overflow 32 bits so the use
of a 64-bit type is completely unnecessary. Secondly, the scale
is either a power of two or 0x7fff. Doing separate loops for these
cases avoids using multiplications. Finally, since only the number
of bits, not the actual value, of the maximum value is needed, the
bitwise or of all the values serves the purpose while being faster.
It is worth noting that even if overflow could happen, it was not
handled correctly anyway.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The operands in both cases are 16-bit so cannot overflow a 32-bit
destination. In gain_scale() the inputs are reduced to 14-bit,
so even the shift cannot overflow.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Adding instead of subtracting the products in the loop allows the
compiler to generate more efficient multiply-accumulate instructions
when 16-bit multiply-subtract is not available. ARM has only
multiply-accumulate for 16-bit operands. In general, if only one
variant exists, it is usually accumulate rather than subtract.
In the same spirit, using the dedicated saturation function enables
use of any special optimised versions of this.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Fixed-point audio codecs often use saturating arithmetic, and
special instructions for these operations are common.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The script was previously run with perl -w through the shebang
command. Now that the script is executed through direct perl invocation
the -w in the shebang command is ignored. This patch re-enables "use
warnings" whatever way the script is invoked.
Idea-By: jamal <jamrial@gmail.com>
About 30% faster on 32 bit Atom, 120% faster on 64 bit Phenom2.
This is interesting because supporting P16 is easier in e.g.
OpenGL (can misuse support for any 2-component 8 bit format),
whereas supporting p9/p10 without conversion needs a texture
format with at least 14 bits actual precision.
The shiftonly == 0 case is not optimized since the code is more
complex and the speed gain less obvious.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
It appears this function is not available everywhere
Should fix Ticket1525
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also changes behavior as the descriptor table is more complete than
the switch/case it replaces. As well as considering all non video as
intra only
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: Detect discontinuities in timestamps for framerate/analyzeduration calculation
lavf: Initialize the stream info timestamps in avformat_new_stream
id3v2: Match PIC mimetype/format case-insensitively
configure: Rename check_asm() to more fitting check_inline_asm()
fate: Only test enabled filters
avresample: De-doxygenize some comments where Doxygen is not appropriate
rtmp: split chunk_size var into in_chunk_size and out_chunk_size
rtmp: Factorize the code by adding find_tracked_method
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These are normally initialized to AV_NOPTS_VALUE at the start
of avformat_find_stream_info, but if a new stream is found while
this function is running (e.g. like in mpegts), the newly added
AVStreams didn't have these values properly initalized, leading
to avformat_find_stream_info terminating too soon (when the
first timestamps are far from 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files' embedded art seems to have the mimetype 'image/JPG' instead
of 'image/jpg'. Libav fails to parse those because it matches
case-sensitively.
Use av_strncasecmp() to fix this behaviour.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes Ticket1627
The fate change is due to ffmpeg no longer pushing audio timestamps
aggressively up (which is what caused the AV sync issues in the ticket)
but leaving them as they are.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
C++ does not allow to mix different enums, so e.g. code comparing
ACodecID with CodecID would fail to compile with gcc.
This very evil hack should fix this problem.
* qatar/master:
g723.1: fix addition overflow
g723.1: simplify and fix multiplication overflow
g723.1: deobfuscate an expression
g723.1: remove unused #includes
ARM: add missing "cc" clobber in av_clipl_int32_arm()
rtmp: Factorize the code by adding handle_invoke_error
rtmp: Factorize the code by adding handle_invoke_status
rtmp: Factorize the code by adding handle_invoke_result
libavutil: remove unused av_abort() macro
ffmenc: replace if/abort with assert()
libavutil: drop offsetof() fallback definition
libavutil: drop fallback definitions of INTxx_MIN/MAX
configure: Check for a sctp struct instead of just the header
configure: suncc: Add -xc99 to dependency flags, required on Solaris
doxygen: Fix function parameter names to match the code
doc: Drop obsolete shared libs cflags hint to workaround Cygwin gcc bugs
swf: Move shared table out of the header file
swf: Move swf_audio_codec_tags table to the only place it is used
fate: add G.723.1 decoder tests
Conflicts:
configure
doc/platform.texi
libavformat/Makefile
libavutil/arm/intmath.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds a function to retrieve the number of entries in a
dictionary and updates the places directly accessing what should
be an opaque struct to use this new function instead.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In 16-bit arithmetic, x * 0xffffc is simply x * -4 with extra overflows,
(and the constant was probably meant to be 0xfffc). Combined with the
shift, this simplifies to -x >> 1. Finally, clearing the low two bits
with a 32-bit mask and switching to a 32-bit type allows more efficient
code on 32-bit machines.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
motion_est: drop inline from sad_hpel_motion_search()
motion_est: remove unused macros
motion_est: remove useless no_motion_search() function
lagarith: frame multithreading
doxygen: qdm2: Drop documentation for non-existing function parameters
build: add HOSTOBJS to SUBDIR_VARS list
Conflicts:
Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous code dependent on the input buffer matching the
buffer that has been provided by yadifs get_buffer.
The API does in now way gurantee this though its often true.
This fixes some out of array reads.
The regression test checksums change due to "out of picture" values
being initialized differently.
There should be no visual difference in the filters output
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The condition is trivially true, but keeping the assert() is
sensible to avoid FFM_HEADER_SIZE ever getting out of sync with
the actual code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The only compiler I have that does not define the standard
offsetof() macro is "Bruce's C Compiler", a simple compiler
for producing 8/16-bit 8086 code, usually for use in early
stages of PC booting.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This list is incomplete (we also use UINT16_MAX), so there does
not appear to be any system we care about that needs these.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This fixes build failures on debian/kfreebsd, which has the
sctp.h header, but it is currently broken (a cpp test succeeds,
but a compile test fails), see http://bugs.debian.org/684330 for
details.
Also remove the checked item from HAVE_LIST, since the corresponding
HAVE_* define isn't used by the source code.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mpegvideo: reduce excessive inlining of mpeg_motion()
mpegvideo: convert mpegvideo_common.h to a .c file
build: factor out mpegvideo.o dependencies to CONFIG_MPEGVIDEO
Move MASK_ABS macro to libavcodec/mathops.h
x86: move MANGLE() and related macros to libavutil/x86/asm.h
x86: rename libavutil/x86_cpu.h to libavutil/x86/asm.h
aacdec: Don't fall back to the old output configuration when no old configuration is present.
rtmp: Add message tracking
rtsp: Support mpegts in raw udp packets
rtsp: Support receiving plain data over UDP without any RTP encapsulation
rtpdec: Remove an unused include
rtpenc: Remove an av_abort() that depends on user-supplied data
vsrc_movie: discourage its use with avconv.
avconv: allow no input files.
avconv: prevent invalid reads in transcode_init()
avconv: rename OutputStream.is_past_recording_time to finished.
Conflicts:
configure
doc/filters.texi
ffmpeg.c
ffmpeg.h
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/mpegvideo.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Just for metadata, this change has been integrated by hand already
* commit '0c00fd80ee4791bd70b634084307fc9f179e0412':
avconv: split the code for processing input packets out of transcode()
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f154ef1ae5b03f288dd8c025dab1884b4cb20c1a':
avconv: send EOF to lavfi even if flushing the decoder fails
avconv: get rid of pointless temporary variable.
avconv: simplify transcode().
avconv: cosmetics
avconv: replace no_packet array in transcode() with a var in InputStream
avconv: remove unused variable from InputFile.
avconv: remove commented out cruft.
avconv: maintain sync on lavfi outputs.
Conflicts:
ffmpeg.c
ffmpeg.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
At both places this function is called, mb_[xy] == s->mb_[xy]
making the call together with following code equivalent to
simply assigning zeros.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The old code generates a termination packet with the same regions as the
start packet and page_state set to "only what changed"; the result is
that the termination packet is decoded as identical to the start packet.
The new code does as found in some DVB broadcasts: produce a packet with
no regions. This is done by expecting num_rects to be 0 rather than
using a flip-flop. ffmpeg.c is updated accordingly.
The main benefit of inlining this function is from constant
propagation for the 'field_based' argument. Instead of inlining
all calls, create two versions of the function for field_based
values of 0 and 1.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This file defines a single, huge function, MPV_motion(), which
although being declared inline is not actually inlined by the
compiler (for good reason). There is thus no sense in defining
this function in a header file, resulting in multiple copies of
it in the final library.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds a hidden config variable for the mpegvideo.o dependency
and selects from the codecs which require it.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This macro is only used in two places, both in libavcodec, so this
is a more sensible place for it.
Two small tweaks to the macro are made:
- removing the trailing semicolon
- dropping unnecessary 'volatile' from the x86 asm
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (23 commits)
build: cosmetics: Reorder some lists in a more logical fashion
x86: pngdsp: Fix assembly for OS/2
fate: add test for RTjpeg in nuv with frameheader
rtmp: send check_bw as notification
g723_1: clip argument for 15-bit version of normalize_bits()
g723_1: use all LPC vectors in formant postfilter
id3v2: Support v2.2 PIC
avplay: fix build with lavfi disabled.
avconv: split configuring filter configuration to a separate file.
avconv: split option parsing into a separate file.
mpc8: do not leave padding after last frame in buffer for the next decode call
mpegaudioenc: list supported channel layouts.
mpegaudiodec: don't print an error on > 1 frame in a packet.
api-example: update to new audio encoding API.
configure: add --enable/disable-random option
doc: cygwin: Update list of FATE package requirements
build: Remove all installed headers and header directories on uninstall
build: change checkheaders to use regular build rules
rtmp: Add a new option 'rtmp_subscribe'
rtmp: Add support for subscribing live streams
...
Conflicts:
Makefile
common.mak
configure
doc/examples/decoding_encoding.c
ffmpeg.c
libavcodec/g723_1.c
libavcodec/mpegaudiodec.c
libavcodec/x86/pngdsp.asm
libavformat/version.h
library.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In particular, do not upcase first word, do not use final dot, use a verb
to specify what the option does, sort entries by name, apply random
vertical align.
Create a dedicated options subchapter, rather than a subchapter for each
option.
This is more consistent with the rest of the docs. Also apply misc minor
fixes for improving rendering.
The syntax of the 'glob_sequence' pattern type is explained in the image2
manual section, so there is no need to replicate it here.
Also discourage the use of such deprecated pattern type by not showing
examples employing it.
Replace the syntax explanation with an use example of the 'glob' pattern
type.
Allow to override the default 'glob_sequence' value, which is deprecated
in favor of the new 'glob' and 'sequence' options.
The new pattern types should be easier on the user since they are more
predictable than 'glob_sequence', and do not require awkward escaping.
This is limited to the chars that arent filtered by av_log() already
we might filter more aggressively if theres some case where this becomes
needed.
Fixes Ticket1181
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Before this commit, poll_filters() reads all frames available on each
lavfi output. This does not work for lavfi sources that produce
an unlimited number of frames, e.g. color and similar.
With this commit, poll_filters() reads from output with the lowest
timestamp and returns to wait for more input if no frames are available
on it.
Fix bogus warnings of the kind:
option 'color' is ignored with source 'testsrc'
when the color value is not explicitely set and the filter is different
from "color".
It expects maximum value to be 32767 but calculations in scale_vector()
which uses this function can give it ABS(-32768) which leads to wrong
result and thus clipping is needed.
id3 v2.2 uses image format ("JPG","PNG") instead of mimetypes.
Currently, the attached picture is skipped because the format string
does not match a known picture mimetype.
This patch fixes this behaviour.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
x86: fix build with nasm 2.08
x86: use nop cpu directives only if supported
x86: fix rNmp macros with nasm
build: add trailing / to yasm/nasm -I flags
x86: use 32-bit source registers with movd instruction
x86: add colons after labels
Conflicts:
Makefile
libavutil/x86/x86inc.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Many compilers need special flags to compile *.h files as regular
source code, if they will do so at all. Rather than hoping all
compilers will have such a flag and adding mappings for it, create
wrapper .c files for test building single headers.
This allows using the regular rule for compiling C files without the
need for special flags, and it also provides proper dependency tracking
for these objects.
Signed-off-by: Mans Rullgard <mans@mansr.com>
When streaming live streams using the Akamai, Edgecast or Limelight CDN,
players cannot simply connect to the live stream. Instead, they have to
subscribe to it, by sending an FC Subscribe call to the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Folder and file names weren't being separated with a slash.
This resulted in .dll.a, .lib and .def files not being removed on uninstall.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
checkheaders wasn't creating folders as needed, so if it was run
immediately after the configure script it would fail as soon as
it tried to compile headers inside the ARCH folders.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Some compilers do not support the Q/R modifiers used to access
the low/high parts of a 64-bit register pair. Check for this
and disable all uses of it when not supported.
Fixes bug #337.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* commit 'f5d2c597e99af218b0d4d1cf9737c7e68ee934e4':
build: fix library installation on cygwin
mpc8: add a flush function
mpc8: set packet duration and stream start time instead of tracking frames
Conflicts:
libavformat/mpc8.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Patch readapted by Stefano Sabatini, color values proposed by Tim
Nicholson <nichot20@yahoo.com>.
Address trac ticket #1462.
See thread:
Subject: [FFmpeg-devel] [PATCH] smptebars filter
Date: Wed, 20 Jun 2012 01:54:58 +0000
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Make add_{audio,video}_stream return the found codec, and pass it to
avcodec_open2() through open_{audio,video} functions.
Fix failure:
No codec provided to avcodec_open2().
could not open codec
This is also consistent with the use of the avcodec_open2() API in the
codebase.
It appears that something goes wrong in old nasm versions when the
%+ operator is used in the last argument of a macro invocation and
this argument is tested with %ifdef within the macro. This patch
rearranges the macro arguments such that the %+ operator is never
used in the last argument.
nasm does not support 'CPU foonop' directives. This adds a configure
test for the directive and uses it only if supported.
Signed-off-by: Mans Rullgard <mans@mansr.com>
yasm tolerates mismatch between movd/movq and source register size,
adjusting the instruction according to the register. nasm is more
strict.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This installs libraries using the proper names and locations,
generates an import lib for the DLL, and drops no longer needed
linker flags.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The assert can be false with some invalid inputs, the check is
too expensive to always do though for just a warning message.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is possible in various error pathes as well as gap handling
that this has already been allocated. Its not clear why that
would be a problem with the current code, thus disable the
assert to avoid common assert failure when asserts are enabled.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This simplifies adding extra flags for individual programs
and also allows more than one object file per program.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The check is bogus since the nuv frameheader is already skipped
and the (decompressed) RTjpeg header is checked.
This reverts commit f6afacdb3b.
CC: libav-stable@libav.org
At this place, the normal way of initializing a struct works
fine, there's no need for a struct literal.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
x86: h264_idct: Rename x264_add8x4_idct_sse2 --> h264_add8x4_idct_sse2
rational: add av_inv_q() returning the inverse of an AVRational
dpx: Make start offset unsigned
lavfi: properly signal out-of-memory error in ff_filter_samples
cosmetics: Fix a few switched periods and linebreaks
zerocodec: Fix memleak in decode_frame
zerocodec: Cosmetics
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous method of having to initialize it outside lead
to incorrect code: even if it was initialized, it usually was
only initialized once, thus a packet that could not be matched
to any stream would just be processed with the return values
from the previous call.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Also slightly more correct behaviour in case streams_left for
some reason is 0 from the start.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
We're now running some of this code through valgrind for the first
time, and a few warnings showed up stemming from two problems.
1) The ASS code assumes the subtitle header is null terminated, but
it wasn't, and passing the size down doesn't look like fun, so I
added a terminator
2) The code wasn't freeing all of its state.
Signed-off-by: Philip Langdale <philipl@overt.org>
Running lib.exe without parameters will always result in an error,
and failing the check.
Using the -list paramter results in a success if lib.exe is present.
Fixes crash based on a uninitialized array index read.
If the read does not crash then out of array writes based
on the same index might have been triggered afterwards.
Found-by: inferno@chromium.org
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new name seems more consistent with the assumed logic.
"start_index" represents the minimum accepted value as first index, and
not the maximum value as implicitely assumed by the previous name.
* qatar/master:
lavr: fix handling of custom mix matrices
fate: force pix_fmt in lagarith-rgb32 test
fate: add tests for lagarith lossless video codec.
ARMv6: vp8: fix stack allocation with Apple's assembler
ARM: vp56: allow inline asm to build with clang
fft: 3dnow: fix register name typo in DECL_IMDCT macro
x86: dct32: port to cpuflags
x86: build: replace mmx2 by mmxext
Revert "wmapro: prevent division by zero when sample rate is unspecified"
wmapro: prevent division by zero when sample rate is unspecified
lagarith: fix color plane inversion for YUY2 output.
lagarith: pad RGB buffer by 1 byte.
dsputil: make add_hfyu_left_prediction_sse4() support unaligned src.
Conflicts:
doc/APIchanges
libavcodec/lagarith.c
libavfilter/x86/gradfun.c
libavutil/cpu.h
libavutil/version.h
libswscale/utils.c
libswscale/version.h
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With this feature, it becomes possible to perform commonly
requested tasks, such as hardcoding bitmap subtitles.
This will be reverted once libavfilter has proper support
for subtitles. All the changes have the string "sub2video"
in them, it makes it easy to spot the parts.
The code currently use cur_buf as the target of the copy,
but cur_buf can be cleared by the filter if it has given
the reference away or stored it elsewhere as soon as start_frame.
The code still relies on the fact that the reference is not
destroyed until end_frame. All filters currently follow that condition.
An av_assert1() is added to check it; it should at least cause
very visible errors in valgrind.
If there was a failure inflating, or reinitializing
the zstream, the current frame's buffer would be lost.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
If there was a failure inflating, or reinitializing
the zstream, the current frame's buffer would be lost.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The current demuxer does not bother to write packet durations,
which makes it impossible to remux into a new format.
Signed-off-by: Philip Langdale <philipl@overt.org>
As packet duration is not stored inherently in MPEG4 containers,
subtitles have their duration expressed by storing an additional
empty packet with a pts matching the desired end time of the real
subtitle. Additionally, it is generally expected that all streams
start at time = 0, so an empty packet needs to be inserted at the
beginning of the stream, before the first real subtitle.
Unfortunately, ffmpeg lacks a proper way to express that a subtitle
might map to multiple packets, so the muxer is the only place we
can handle this.
Signed-off-by: Philip Langdale <philipl@overt.org>
This change introduces a basic encoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to write styling information,
and just writes the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Note that an additional change is required to the mov/mp4 muxer to
write empty subtitle packets to indicate subtitle duration.
Signed-off-by: Philip Langdale <philipl@overt.org>
This is almost a revert of: (the file from the report still works)
commit 80e58c6153
Author: Benoit Fouet <benoit.fouet@free.fr>
Date: Wed Feb 11 11:09:36 2009 +0000
Allow demuxing of audio substreams stored as 0x06 type.
Fixes issue 725: MPEG2 PS with PCM audio.
On behalf of Jai.
Originally committed as revision 17150 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Restore functionality to set the samples directory via the
FATE_SAMPLES environment variable . This is broken since commit
63dcd16 was merged.
Additionally the name FATE_EXTERN is more suited as the current
FATE_SAMPLES make file variable does not carry the name of the
FATE samples or the name of the directory they are stored in, but
does contain the names of the FATE targets that need external
samples. That is samples that are not in the repository and are
not generated on the fly.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
In the GNU assembler, a relational expression, bizarrely, has the
value -1 if true, whereas in Apple's it is +1. This patch makes
sure the correct expression is used in both cases.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The clang integrated assembler does not support pre-UAL syntax,
while gcc requires pre-UAL syntax for ARM code. A patch[1] for
clang to support the old syntax as well has been ignored since
January.
This patch chooses the syntax appropriate for each compiler,
allowing both to build the code. Notably, this change allows
building for iphone with the latest Apple Xcode update.
[1] http://llvm.org/bugs/show_bug.cgi?id=11855
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
vc1dec: Remove separate scaling function for interlaced field MVs
vc1dec: Invoke edge_emulation regardless of MV precision
x86: Use consistent 3dnowext function and macro name suffixes
g723_1: scale output as supposed for the case with postfilter disabled
g723_1: increase excitation storage by 4
g723_1: fix upper bound parameter from inverse maximum autocorrelation
g723_1: make scale_vector() behave like the reference
g723_1: fix off-by-one error in normalize_bits()
g723_1: save/restore excitation with offset to store LPC history
wmapro: prevent division by zero when sample rate is unspecified
x86: proresdsp: improve SIGNEXTEND macro comments
x86: h264dsp: K&R formatting cosmetics
LICENSE: Document all GPL files
Conflicts:
libavcodec/g723_1.c
libavcodec/wmaprodec.c
libavcodec/x86/h264dsp_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Refactoring mmx2/mmxext YASM code with cpuflags will force renames.
So switching to a consistent naming scheme beforehand is sensible.
The name "mmxext" is more official and widespread and also the name
of the CPU flag, as reported e.g. by the Linux kernel.
For left HFYU prediction, we predict from the buffer buf+1 using 8- or
16-byte reads. This means that aligning the buffer by 16 bytes is in
itself not sufficient, because if the width itself is 16- or 8-byte
aligned, the buffer will not be padded, and thus a read of size 16 at
buf+1 will overflow boundaries at the right edge. Padding the buffer by
1 byte is sufficient to not overflow its boundaries.
Fixes bug 342.
This makes add_hfyu_left_prediction_sse4() handle sources that are not
16-byte aligned in its own function rather than by proxying the call to
add_hfyu_left_prediction_ssse3(). This fixes a crash on Win64, since the
sse4 version clobberes xmm6, but the ssse3 version (which uses MMX regs)
does not restore it, thus leading to XMM clobbering and RSP being off.
Fixes bug 342.
The scaling process for obtaining direct MVs from co-located field MVs
is the same for interlaced field and progressive pictures.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
In VC-1 interlaced field pictures, chroma motion vectors can extend beyond
picture boundary even if luma vectors are bounded. The problem shows up
only for hpel interpolated MVs, and may be due to the way motion vectors
are scaled / cropped.
Thanks to Konstantin Shishkov for suggesting the fix. This fixes
long-known segfaults in MC-VC1.ts from videolan streams archive.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Currently there is a wild mix of 3dn2/3dnow2/3dnowext. Switching to
"3dnowext", which is a more common name of the CPU flag, as reported
e.g. by the Linux kernel, unifies this.
Fixed codebook mode in 5300 rate may write up to SUBFRAME_LEN + 4 and
that is considered normal by the reference decoder. Without that additional
padding it might overwrite first elements of LPC history.
The boilerplate states that the files are under LGPL,
but refer the user to the GPL at one place.
These files were (re)implemented specifically for FFmpeg.
Some calculations were changed in b6a3849 to use mmsize, which was not correct
for the AVX version, which uses INIT_YMM and therefore has mmsize == 32.
Fixes Bug 341.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
This allows building dct-test even if aandcttab.o is not pulled in
by any enabled codec. The DCT with which these tables are used does
not use them directly, so building it without the tables is possible.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reordering the members in this struct reduces the holes required
to maintain alignment. With this order, the only remaining, and
unavoidable, hole is 3 bytes following left_nnz.
Signed-off-by: Mans Rullgard <mans@mansr.com>
These functions are not faster than other mmx implementations on
any hardware I have been able to test on, and they are horribly
inaccurate. There is thus no reason to ever use them.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Semantic for the function ff_null_start_frame() was changed in
07bad27810, and it has now the same behavior of
ff_null_start_frame_keep_ref(), thus it makes no sense to keep both of
them.
* qatar/master:
dca: Switch dca_sample_rates to avpriv_ prefix; it is used across libs
ARM: use =const syntax instead of explicit literal pools
ARM: use standard syntax for all LDRD/STRD instructions
fft: port FFT/IMDCT 3dnow functions to yasm, and disable on x86-64.
dct-test: allow to compile without HAVE_INLINE_ASM.
x86/dsputilenc: bury inline asm under HAVE_INLINE_ASM.
dca: Move tables used outside of dcadec.c to a separate file.
dca: Rename dca.c ---> dcadec.c
x86: h264dsp: Remove unused variable ff_pb_3_1
apetag: change a forgotten return to return 0
Conflicts:
libavcodec/Makefile
libavcodec/dca.c
libavcodec/x86/fft_3dn.c
libavcodec/x86/fft_3dn2.c
libavcodec/x86/fft_mmx.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch fixes two things:
- in case of subtitles, check_recording_time() is comparing the current
PTS to the recording time (-t option, set to INT_MAX by default), so
the -ss option needs to be taken into account. It is not required in
do_{audio,video}_out() because this adjustment is set while polling
the filtergraph (see poll_filters()).
- It also adjusts the PTS sent to the encoder (and later transmitted to
the muxer) so the TS in the output make sense and are not kept
verbatim.
Note: this only works for muxers honoring the PTS, such as
lavf/matroskaenc. But for other such as the ASS muxer which just does a
verbatim copy, or the SubRip muxer which doesn't write the TS in some
cases, it will not work yet.
The previous validity check seems to work only for some
(presumably older) files, in current versions the first bytes
now contain the data size.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
There is no need to start_frame immediately on the output link
since the rest is only done with the last frame of the tile.
link->out_buf is now automatically dereferenced; since we give
it away it must be cleared.
Fix an assert failure; found by Clément Bœsch.
The standard syntax requires two destination registers for
LDRD/STRD instructions. Some versions of the GNU assembler
allow using only one with the second implicit, others are
more strict.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
mpc8: return more meaningful error codes.
mpc: return more meaningful error codes.
wv,mpc8: don't return apetag data in packets.
rtmp: do not warn about receiving metadata packets
x86: h264dsp: Adjust YASM #ifdefs
x86: yadif: Mark mmxext optimizations as such
h264: convert loop filter strength dsp function to yasm.
Improve descriptiveness of a number of codec and container long names
Conflicts:
libavcodec/flvdec.c
libavcodec/libopenjpegdec.c
libavformat/apetag.c
libavformat/mp3dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Commit 2bf0982 introduced an overflow check in loco_decode_plane,
but the error code is never taken into account, leading to
completely idiotic return values.
samples_size and samples_idx are supposed to be multiple of
channels at all time. If they are, the division is exact;
if they are not, something is very wrong in the code.
Add "data" and "extradata" attributes to the schema.
Add "tag" element in "streams".
Print extradata before tags to avoid closing the element.
Fix trac ticket #1588.
There is no need to duplicate the input reference, since a filter should
not pass along a reference which is later modified. If this happens the
filter passing the reference should be fixed.
Also improve consistency with start_frame() of settb, allowing a pending
factorization.
This completes the conversion of h264dsp to yasm; note that h264 also
uses some dsputil functions, most notably qpel. Performance-wise, the
yasm-version is ~10 cycles faster (182->172) on x86-64, and ~8 cycles
faster (201->193) on x86-32.
* qatar/master:
avformat: Drop pointless "format" from container long names
swscale: bury one more piece of inline asm under HAVE_INLINE_ASM.
wv: K&R formatting cosmetics
configure: Add missing descriptions to help output
h264_ps: declare array of colorspace strings on its own line.
fate: amix: specify f32 sample format for comparison
tiny_psnr: support 32-bit float samples
eamad/eatgq/eatqi: call special EA IDCT directly
eamad: remove use of MpegEncContext
mpegvideo: remove unnecessary inclusions of faandct.h
af_asyncts: avoid overflow in out_size with large delta values
af_asyncts: add first_pts option
Conflicts:
configure
libavcodec/eamad.c
libavcodec/h264_ps.c
libavformat/crcenc.c
libavformat/ffmdec.c
libavformat/ffmenc.c
libavformat/framecrcenc.c
libavformat/md5enc.c
libavformat/nutdec.c
libavformat/rawenc.c
libavformat/yuv4mpeg.c
tests/tiny_psnr.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flvdec: remove spurious use of stream id
lavf: deprecate r_frame_rate.
lavf: round estimated average fps to a "standard" fps.
Conflicts:
ffmpeg.c
ffprobe.c
libavformat/avformat.h
libavformat/electronicarts.c
libavformat/flvdec.c
libavformat/rawdec.c
libavformat/utils.c
tests/ref/fate/iv8-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Avoid to fill the same picture again and again with the same content.
Optimize computation, and provides an example for the use of the
AV_PERM_REUSE permission flag.
* commit 'fe1c1198e670242f3cf9e3e1eef27cff77f3ee23':
lavf: use dts difference instead of AVPacket.duration in find_stream_info()
avf: introduce nobuffer option
fate: make yadif tests consistent across systems
vf_hqdn3d: support 9 and 10bit colordepth
vf_hqdn3d: reduce intermediate precision
vf_hqdn3d: simplify and optimize
factor identical ff_inplace_start_frame out of two filters
vf_hqdn3d: cosmetics
avprobe/avconv: fix tentative declaration compile errors on MSVS.
Conflicts:
doc/APIchanges
ffmpeg.c
ffprobe.c
libavformat/avformat.h
libavformat/options_table.h
libavformat/utils.c
libavformat/version.h
tests/fate/filter.mak
tests/ref/fate/filter-yadif-mode0
tests/ref/fate/filter-yadif-mode1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These decoders use a special non-MPEG2 IDCT. Call it directly
instead of going through dsputil. There is never any reason
to use a regular IDCT with these decoders or to use the EA IDCT
with other codecs.
This also fixes the bizarre situation of eamad and eatqi decoding
incorrectly if eatgq is disabled.
Signed-off-by: Mans Rullgard <mans@mansr.com>
There is no sense in pulling in this monster struct just for
a handful of fields. The code does not call any functions
expecting an MpegEncContext.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows for padding/trimming at the start of stream. By default, no
assumption is made about the first frame's expected pts, so no padding or
trimming is done.
The values are listed if setting them fails.
Using "-profile help" or "-profile list" have that effect.
Similar to 3aba391.
Suggested by "rogerdpack" in trac ticket #1529.
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
AVPacket.duration is mostly made up and thus completely useless, this is
especially true for video streams.
Therefore use dts difference for framerate estimation and
the max_analyze_duration check.
The asyncts test now needs -analyzeduration, because the default is 5
seconds and the audio stream in the sample appears at ~10 seconds.
Useful in cases where a significant analyzeduration is
still needed, while minimizing buffering before output.
An example is processing low-latency streams where all
media types won't necessarily come in if the
analyzeduration is small.
Additional changes by Josh Allmann <joshua.allmann@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master: (35 commits)
h264_idct_10bit: port x86 assembly to cpuflags.
x86inc: clip num_args to 7 on x86-32.
x86inc: sync to latest version from x264.
fft: rename "z" to "zc" to prevent name collision.
wv: return meaningful error codes.
wv: return AVERROR_EOF on EOF, not EIO.
mp3dec: forward errors for av_get_packet().
mp3dec: remove a pointless local variable.
mp3dec: remove commented out cruft.
lavfi: bump minor to mark stabilizing the ABI.
FATE: add tests for yadif.
FATE: add a test for delogo video filter.
FATE: add a test for amix audio filter.
audiogen: allow specifying random seed as a commandline parameter.
vc1dec: Override invalid macroblock quantizer
vc1: avoid reading beyond the last line in vc1_draw_sprites()
vc1dec: check that coded slice positions and interlacing match.
vc1dec: Do not ignore ff_vc1_parse_frame_header_adv return value
configure: Move parts that should not be user-selectable to CONFIG_EXTRA
lavf: remove commented out cruft in avformat_find_stream_info()
...
Conflicts:
Makefile
configure
libavcodec/vc1dec.c
libavcodec/x86/h264_deblock.asm
libavcodec/x86/h264_deblock_10bit.asm
libavcodec/x86/h264dsp_mmx.c
libavfilter/version.h
libavformat/mp3dec.c
libavformat/utils.c
libavformat/wv.c
libavutil/x86/x86inc.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
MMX-enabled systems by default use some dsputil functions differing
from the C versions. Adding these flags ensures accurate ones are
used everywhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows us to unconditionally set the cglobal num_args
parameter to a bigger value, thus making writing yasm code
even easier than before.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Without this, cglobal will expand "z" to "zh" to access the high byte
in a register's word, which causes a name collision with the ZH(x) macro
further up in this file.
The voice register functions return the same voice structure
upon multiple registration. It causes us two problems:
If we delete a voice without deregistering it, it leaves
a dangling pointer inside the library.
If we delete or unregister a voice at uninit, it may still
be in use by another instance of the filter.
The second problem is solved by keeping an usage counter inside
asrc_flite. This is not thread-safe, but neither is flite itself.
This fixes out of array writes
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Since the recent changes, movie and amovie are able to deal with more
than one type of stream, so they should be categorized as "multimedia
sources" rather than audio/video sources.
This allows non-standard replacements for the -c compiler flag.
Some compilers use other flags or no flag at all in place of
the usual one.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows using non-standard flags for running the C preprocessor.
The -o flag must be included in this setting due to strange syntax
required by some compilers.
Set the correct flags for tms470.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Previously, we returned any error code except AVERROR_EOF to the
caller - only if AVERROR_EOF or 0 was returned, we proceeded to
the next segment.
With some setups of web servers, using Connection: close in https
and GnuTLS, we don't get a clean error code at the end of segments.
In those cases, just proceed to the next segment.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
OpenSSL returns 0 when the peer has closed the connection. GnuTLS
doesn't return that though, but returns
GNUTLS_E_UNEXPECTED_PACKET_LENGTH if the connection simply is closed
without a clean close notify packet.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
proresdsp: port x86 assembly to cpuflags.
lavr: x86: improve non-SSE4 version of S16_TO_S32_SX macro
lavfi: better channel layout negotiation
alac: check for truncated packets
alac: reverse lpc coeff order, simplify filter
lavr: add x86-optimized mixing functions
x86: add support for fmaddps fma4 instruction with abstraction to avx/sse
tscc2: fix typo in array index
build: use COMPILE template for HOSTOBJS
build: do full flag handling for all compiler-type tools
eval: fix printing of NaN in eval fate test.
build: Rename aandct component to more descriptive aandcttables
mpegaudio: bury inline asm under HAVE_INLINE_ASM.
x86inc: automatically insert vzeroupper for YMM functions.
rtmp: Check the buffer length of ping packets
rtmp: Allow having more unknown data at the end of a chunk size packet without failing
rtmp: Prevent reading outside of an allocate buffer when receiving server bandwidth packets
Conflicts:
Makefile
configure
libavcodec/x86/proresdsp.asm
libavutil/eval.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow substitution of channel pairs in the input for nearby channel pairs in
the output in order to get a closer match. Also weigh LFE channel mismatch
differently to favor matching the same layout without LFE over one less
channel with LFE.
Without this fix the last sample was missing from the packet.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This adds a full identification probe of CC, AS, LD and HOSTCC,
and sets up correct flags and dependency tracking for each.
Signed-off-by: Mans Rullgard <mans@mansr.com>
there are some technical problems with fate.ffmpeg.org
thus split the subdomain between fate-suite and fate
fate-suite is now (temporary) provided by our main server
until fate-suite.ffmpeg.org is setup to point somewhere
we use fate-suite.avcodec.org
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libopenjpeg: support YUV and deep RGB pixel formats
Fix typo in v410 decoder.
vf_yadif: unset cur_buf on the input link.
vf_overlay: ensure the overlay frame does not get leaked.
vf_overlay: prevent premature freeing of cur_buf
Support urlencoded http authentication credentials
rtmp: Return an error when the client bandwidth is incorrect
rtmp: Return proper error code in handle_server_bw
rtmp: Return proper error code in handle_client_bw
rtmp: Return proper error codes in handle_chunk_size
lavr: x86: add missing vzeroupper in ff_mix_1_to_2_fltp_flt()
vp8: Replace x*155/100 by x*101581>>16.
vp3: don't use calls to inline asm in yasm code.
x86/dsputil: put inline asm under HAVE_INLINE_ASM.
dsputil_mmx: fix incorrect assembly code
rtmp: Factorize the code by adding handle_invoke
rtmp: Factorize the code by adding handle_chunk_size
rtmp: Factorize the code by adding handle_ping
rtmp: Factorize the code by adding handle_client_bw
rtmp: Factorize the code by adding handle_server_bw
Conflicts:
libavcodec/libopenjpegdec.c
libavcodec/x86/dsputil_mmx.c
libavfilter/vf_overlay.c
libavformat/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures its not used afterwards.
This commit should not change anything as it should not have been used afterwards.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
By moving it to a later point relative and unknown timestamps
are more likely to have been corrected
similar patch reviewed-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Conflicts:
libavformat/utils.c
It should be possible to specify usernames in http requests containing
urlencoded characters. This patch adds support for decoding the auth
strings.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtmp: Add a new option 'rtmp_pageurl'
doc: Update the description of the rtmp_tcurl option
rtmp: Make the description of the rtmp_tcurl option more generic
libfdk-aacenc: add LATM/LOAS encapsulation support
sctp: add port missing error message
tcp: add port missing error message
avfilter: Fix printf format string conversion specifier
Conflicts:
libavcodec/version.h
libavfilter/avfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Mixing yasm and inline asm is a bad idea, since if either yasm or inline
asm is not supported by your toolchain, all of the asm stops working.
Thus, better to use either one or the other alone.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
In ff_put_pixels_clamped_mmx(), there are two assembly code blocks.
In the first block (in the unrolled loop), the instructions
"movq 8%3, %%mm1 \n\t", and so forth, have problems.
From above instruction, it is clear what the programmer wants: a load from
p + 8. But this assembly code doesn’t guarantee that. It only works if the
compiler puts p in a register to produce an instruction like this:
"movq 8(%edi), %mm1". During compiler optimization, it is possible that the
compiler will be able to constant propagate into p. Suppose p = &x[10000].
Then operand 3 can become 10000(%edi), where %edi holds &x. And the instruction
becomes "movq 810000(%edx)". That is, it will stride by 810000 instead of 8.
This will cause a segmentation fault.
This error was fixed in the second block of the assembly code, but not in
the unrolled loop.
How to reproduce:
This error is exposed when we build using Intel C++ Compiler, with
IPO+PGO optimization enabled. Crashed when decoding an MJPEG video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Without this patch a user a bit absent-minded may not notice that
the connection doesn't work because the port is missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this patch a user a bit absent-minded may not notice that
the connection doesn't work because the port is missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
commit 20e88d8618
Fix avui stream-copy.
The native decoder and MPlayer's binary decoder only need the
APRG atom, QuickTime at least requires also the ARES atom and
four additional 0 bytes padding at the end of stsd.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The native decoder and MPlayer's binary decoder only need the
APRG atom, QuickTime at least requires also the ARES atom and
four additional 0 bytes padding at the end of stsd.
The old avcodec_find_best_pix_fmt() was insufficient due to 64 pix_fmt limit.
In ffmpeg this problem has been solved long ago through avcodec_find_best_pix_fmt2()
Today libav has added a incompatible modified version of avcodec_find_best_pix_fmt2()
under the same name, thus again breaking ABI/API ...
The avcodec_find_best_pix_fmt_of_list() added in this commit here makes the libav
API available to ffmpeg users too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Attached patch (together with demuxing patch) allows WMP/msacm G723.1 codec decode files encoded by FFmpeg.
Tested with both 6400 and 5333 mode
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
OpenJPEG doesn't have a max lowres limit, so don't enforce an arbitrary one.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add credit/copyright to librtmp authors for parts of the RTMPE code
rtmp: Move the CONFIG_ condition into the if conditions
aac: Mention abbreviation as well in long_name
build: Skip compiling rtmpdh.h if ffrtmpcrypt protocol is not enabled
doc: Add Git configuration section
configure: Add a dependency on https for rtmpts
rtp: Only choose static payload types if the sample rate and channels are right
Conflicts:
doc/git-howto.texi
libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Attached patch fixes remuxing of G723.1 in wav, so the output is playable by WMP.
(It's still not enough for encoding - probably some extradata should be added to the output file
to make it playable by WMP/win codec)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure these calls are removed by dead code elimination
even if optimization is disabled. This fixes building without
crypto libraries without optimization.
Signed-off-by: Martin Storsjö <martin@martin.st>
Make it possible to use the run bisect sub command. As with all
other ffbisect commands, revisions that do not contain the needed
tools are skipped.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
In file libavcodec/x86/dsputil_mmx.c, function ff_put_pixels_clamped_mmx(), there are two assembly code blocks. In the first block (in the unrolled loop), the instructions "movq 8%3, %%mm1 \n\t" etc have problem.
For above instruction, it is clear what the programmer wants: a load from p + 8. But this assembly code doesn’t guarantee that. It only works if the compiler puts p in a register to produce an instruction like this: “movq 8(%edi), %mm1”. During compiler optimization, it is possible that the compiler will be able to constant propagate into p. Suppose p = &x[10000]. Then operand 3 can become 10000(%edi), where %edi holds &x. And the instruction becomes “movq 810000(%edx)”. That is, it will stride by 810000 instead of 8.
This will cause the segmentation fault.
This error was fixed in the second block of the assembly code, but not in the unrolled loop.
How to reproduce:
This error is exposed when we build the ffmpeg using Intel C++ Compiler, IPO+PGO optimization. The ffmpeg was crashed when decoding a mjpeg video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The rtmpts protocol uses https implicitly, via the ffrtmphttp
protocol, but the ffrtmphttp protocol is also useable for plain
rtmpt without https, so the dependency needs to be added here instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
The rtmpts protocol uses https implicitly, via the ffrtmphttp
protocol, but the ffrtmphttp protocol is also useable for plain
rtmpt without https, so the dependency needs to be added here instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
If using a different sample rate or number of channels, use a dynamic
payload type instead, where the parameters are passed in the SDP.
G722 is a special case where the normal rules don't apply.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
v410dec: Implement explode mode support
zerocodec: fix direct rendering.
wav: init st to NULL to avoid a false-positive warning.
wavpack: set bits_per_raw_sample for S32 samples to properly identify 24-bit
h264: refactor NAL decode loop
RTMPTE protocol support
RTMPE protocol support
rtmp: Add ff_rtmp_calc_digest_pos()
rtmp: Rename rtmp_calc_digest to ff_rtmp_calc_digest and make it global
swscale: add missing HAVE_INLINE_ASM check.
lavfi: place x86 inline assembly under HAVE_INLINE_ASM.
vc1: Add a test for interlaced field pictures
swscale: Mark all init functions as av_cold
swscale: x86: Drop pointless _mmx suffix from filenames
lavf: use conditional notation for default codec in muxer declarations.
swscale: place inline assembly bilinear scaler under HAVE_INLINE_ASM.
dsputil: ppc: cosmetics: pretty-print
dsputil: x86: add SHUFFLE_MASK_W macro
configure: respect CC_O setting in check_cc
Conflicts:
Changelog
configure
libavcodec/v410dec.c
libavcodec/zerocodec.c
libavformat/asfenc.c
libavformat/version.h
libswscale/utils.c
libswscale/x86/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Set picture type before calling get_buffer.
This allows the DR application to make better decisions.
It also fixes a resource leak in case of missing reference frames
since it would call get_buffer but never release_buffer.
Also use FFSWAP to ensure that the AVFrame is properly initialized
in the next get_buffer (in particular that data[0] is NULL).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
If st is NULL, it means no 'fmt ' tag is found, but 'data' tag (which
needs a previous 'fmt ' tag to be parsed correctly and st initialized)
check will make sure st is never dereferenced in that case.
Fixes warning:
libavformat/wav.c: In function ‘wav_read_header’:
libavformat/wav.c:499:44: warning: ‘st’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Write out the NAL decoding loops in full so that they are easier
to parse for a preprocessor without it having to be aware of macros
or other such things in C code.
This also makes the code more readable.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPE protocol implementation uses ffrtmpcrypt:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
The video frame reference is passed along the filterchain, and is not
possessed anymore by the filter. If out_buf is not set to NULL, it will
be freed by ff_end_frame() causing a crash.
This addresses the problem that some HAM pictures were decoded with
complete transparency as described in the 'iff: ANIM suppport ' thread
on ffmpeg-devel. The decoder was already setting alpha correctly for
CMAP palettes, just not HAM palettes.
Filters can change the timings, so input files must not
necessarily be read at the same rythm. This patch select
the input file to read based on the timestamp at output
instead of input. With complex filter graphs, finding the
input for a given output is done by making a request and
checking to what buffer source it has been forwarded.
* qatar/master:
FATE: fix the asyncts test
build: Drop gcc-specific warning flag from header compilation rule
FATE: add a test for the asyncts audio filter.
matroskadec: return more correct error code on read error.
buffersrc: check ff_get_audio_buffer() for errors.
lavfi: check all ff_get_video_buffer() calls for errors.
lavfi: check all avfilter_ref_buffer() calls for errors.
vf_select: avoid an unnecessary avfilter_ref_buffer().
buffersrc: avoid creating unnecessary buffer reference
lavfi: use avfilter_unref_bufferp() where appropriate.
vf_fps: add more error checks.
vf_fps: fix a memleak on malloc failure.
lavfi: check all ff_start_frame/draw_slice/end_frame calls for errors
lavfi: add error handling to end_frame().
lavfi: add error handling to draw_slice().
lavfi: add error handling to start_frame().
Conflicts:
Makefile
ffplay.c
libavfilter/buffersrc.c
libavfilter/vf_boxblur.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_frei0r.c
libavfilter/vf_hflip.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/video.c
libavfilter/vsrc_color.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use compiler-specific replacements for the -o flag in check_cc.
This makes tests work properly with compilers using non-standard
flags.
The tms470 flags are updated to work with this scheme.
Signed-off-by: Mans Rullgard <mans@mansr.com>
It adds the following header to the HTML files:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
which helps some browsers to display correctly the few non-ASCII
characters in the doc.
The flag was added to avoid excessive warning spam, but nowadays those
warnings no longer occur in such large numbers as to require silencing.
Besides, gcc-specific flags do not belong in the Makefiles.
These filters are designed for storing and transmitting video sequences
with alpha using higher-efficiency codecs such as x264 which don't
natively support an alpha channel. 'alphaextract' takes an input stream
with an alpha channel and returns a video containing just the alpha
component as a grayscale value; 'alphamerge' takes an RGB or YUV stream
and adds an alpha channel recovered from a second grayscale stream.
Signed-off-by: Steven Robertson <steven@strobe.cc>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Avoid fastidious creation and immediate destroy of the display in case
one of the dither options fails to be set.
Also add NULL checks in write_trailer(), which are now necessary since
the function can be called when not all the components have been
initialized.
* qatar/master:
x86: swscale: Place inline assembly code under appropriate #ifdefs
rtsp: remove terminal comma in FF_RTP_FLAG_OPTS macro.
configure: Remove redundant RTMPT/RTMPTS dependencies
configure: add filtering of host cflags/ldflags
configure: initialise all flag filters at the same place
configure: add filtering of linker flags
configure: name some variables more consistently
configure: remove filter_cppflags
configure: set icc_version where it is needed
mpegenc: remove disabled code
Conflicts:
configure
libavformat/movenc.c
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavfi: unref AVFilterLink.out_buf in ff_end_frame().
lavfi: unref AVFilterLink.cur_buf in ff_end_frame().
vsrc_testsrc: avoid an unnecessary avfilter_ref_buffer().
vf_slicify: clear AVFilterLink.cur_buf in start_frame().
vf_settb: simplify start_frame().
vf_fieldorder: don't give up its own reference to the output buffer.
vf_pad: don't give up its own reference to the output buffer.
vf_overlay: don't access a buffer reference that's been given away.
vf_drawtext: don't give up its own reference to the input buffer.
vf_gradfun: don't store two pointers to one AVFilterBufferRef.
vf_delogo: don't store two pointers to one AVFilterBufferRef.
vf_aspect: clear AVFilterLink.cur_buf in start_frame().
lavfi: add avfilter_unref_bufferp()
Conflicts:
doc/APIchanges
libavfilter/avfilter.h
libavfilter/buffer.c
libavfilter/vf_aspect.c
libavfilter/vf_drawtext.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Set picture type before calling get_buffer.
This allows the DR application to make better decisions.
It also fixes a resource leak in case of missing reference frames
since it would call get_buffer but never release_buffer.
Also use FFSWAP to ensure that the AVFrame is properly initialized
in the next get_buffer (in particular that data[0] is NULL).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The incompatibility with librtmp is already expressed in the ffrtmphttp
protocol dependency declaration, which both RTMPT and RTMPTS depend on.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This allows filtering of linker flags the same was as already
supported for CFLAGS. The filter must be initialised to 'echo'
early since it is invoked by --extra-ldflags.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This is not used and the current design would not work properly
if mixing tools needing different filters.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Directly forwarding the input buffer to the next filter means that
drawtext no longer owns any references to it and thus shouldn't refer to
it in any way.
Convert them to zigzag order, as the rest of them are.
When I was adding support for 10-bit DNxHD, I just copy-pasted the
missing quant matrices from the spec. Now it turns out the existing
matrices in dnxhddata.c were in zigzag order. This resulted in wrong
quantization for 10-bit DNxHD. The attached patch fixes the problem by
converting 10-bit quant matrices to zigzag order.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This happens with for example mplayer.
Fixing it in ffmpeg allows new ffmpeg to be compiled with older mplayer
which would not be possible if the fix was just in mplayer.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Reap buffers stored in the buffer sinks even when
the avfilter_graph_request_oldest() loop only returns EOF.
avfilter_graph_request_oldest() can cause frames to arrive
to the sinks even when it returns EOF.
If skip_samples is set and timestamps are synthesized using durations,
make them start at -skip_samples (rescaled) instead of 0,
so that the timestamp of the first undiscarded sample is 0.
This reverts commit 744bd8d08c.
pkt_timebase is now set by av_codec_set_pkt_timebase.
If some demuxer set AVStream.time_base directly,
it need to be fixed. There is a warning to detect it.
* qatar/master: (38 commits)
alac: cosmetics: general pretty-printing and comment clean up
alac: calculate buffer size outside the loop in allocate_buffers()
alac: change some data types to plain int
alac: cosmetics: rename some variables and function names
alac: multi-channel decoding support
alac: split element parsing into a separate function
alac: support a read sample size of up to 32
alac: output in planar sample format
alac: add 32-bit decoding support
alac: simplify channel interleaving
alac: use AVPacket fields directly in alac_decode_frame()
alac: fix check for valid max_samples_per_frame
alac: use get_sbits() to read LPC coefficients instead of casting
alac: move the current samples per frame to the ALACContext
alac: avoid using a double-negative when checking if the frame is compressed
alac: factor out output_size check in predictor_decompress_fir_adapt()
alac: factor out loading of next decoded sample in LPC prediction
alac: use index into buffer_out instead of incrementing the pointer
alac: simplify lpc coefficient adaptation
alac: reduce the number of local variables needed in lpc prediction
...
Conflicts:
libavcodec/alac.c
libavformat/cafdec.c
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Print full compiler identification, not only version number
flacdec: reverse lpc coeff order, simplify filter
x86: dsputil: drop some unused CPU flag debug code
Conflicts:
cmdutils.c
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allows to disable interaction from standard input.
Useful, for example, if ffmpeg is in the background process group.
Roughly the same result can be achieved with "ffmpeg ... < /dev/null"
but it requires a shell.
* qatar/master:
ppc: fix build with altivec disabled
vp3: move idct and loop filter pointers to new vp3dsp context
build: add CONFIG_VP3DSP, reduce repetition in OBJS lists
tscc2: do not add/subtract 128 bias during DCT
tscc2: fix typo in DCT
configure: clarify external library section of help output
configure: mark libfdk-aac as nonfree
configure: cosmetics: drop some unnecessary backslashes
os_support: K&R formatting cosmetics
Conflicts:
configure
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This moves all VP3-specific function pointers from dsputil to a
new vp3dsp context. There is no reason to ever use the VP3 IDCT
where an MPEG2 IDCT is expected or vice versa.
Signed-off-by: Mans Rullgard <mans@mansr.com>
It turns out that the reference decoder subtracts 128 from DC during block
decode but adds it back during reordering block with zigzag pattern.
Transforming block with incorrect DC caused heavy visual artifacts for
many quantisers.
* qatar/master:
libopenjpeg: introduce encoding support
libopenjpeg: rename decoder source file.
RTMPTS protocol support
RTMPS protocol support
avconv: print an error message when demuxing fails.
tscc2: DCT output should not be clipped
rtmp: Rename rtmphttp to ffrtmphttp
Conflicts:
Changelog
configure
doc/general.texi
libavcodec/libopenjpegenc.c
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This one is tricky. Consider a graph with two sink links, A and B.
request_oldest() requests on A, and A returns EOF. This EOF causes
a filter to flush pending frames to B; they are unrequested.
Then request_oldest() moves on to B, and B returns EOF.
channel_map is applied between in and postin.
Without this test, if the input format is an acceptable internal format,
the in->postin conversion is skipped. In the best case,
it ignores channel_map, in the worst case it causes an assert failure
if the number of channels is changed by the map.
This silence bunch of useless warnings like:
libavformat/mpeg.c:393:37: warning: variable 'dvdaudio_substream_type' is uninitialized when used within its own initialization [-Wuninitialized]
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* qatar/master:
rtmp: rtmp_parse_result() add case for video and audio packets to avoid undesired debug output.
configure: Move the getaddrinfo function check into the network block
configure: Remove an unused 'have' item
mpeg: remove disabled code
libfdk-aac: Check if cutoff value is valid
network: Always use our version of gai_strerror on windows
network: Undefine existing gai_strerror definitions
network: Extend the fallback gai_strerror implementation to handle more error codes
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The actual size of uncompressed buffer returned by uncompress() may be
smaller than expected, so abort decoding in such cases.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* qatar/master:
configure: Check for CommandLineToArgvW
vc1dec: Do not use random pred_flag if motion vector data is skipped
vp8: Enclose pthread function calls in ifdefs
snow: refactor code to work around a compiler bug in MSVC.
vp8: Include the thread headers before using the pthread types
configure: Check for getaddrinfo in ws2tcpip.h, too
vp8: implement sliced threading
vp8: move data from VP8Context->VP8Macroblock
vp8: refactor decoding a single mb_row
doc: update api changes with the right commit hashes
mem: introduce av_malloc_array and av_mallocz_array
Conflicts:
configure
doc/APIchanges
libavcodec/vp8.c
libavutil/mem.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is only used for checking for a certain library, but the code
doesn't need to know whether the function was found.
Signed-off-by: Martin Storsjö <martin@martin.st>
Passing a cutoff value < sample_rate/256 will cause a crash.
Also, values >20000 will have no effect and 20000 will be used anyway.
Signed-off-by: Mohammad Alsaleh <msal@tormail.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if linking directly to getaddrinfo, use our version of
gai_strerror instead of the system's version. Microsoft explicitly
documents that their version of gai_strerror is thread-unsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids warnings if there already exists a definition.
This is the case on windows, where the getaddrinfo isn't available
and linked to (and we use our fallbacks instead, which actually
try to use the proper getaddrinfo version if found at runtime),
but gai_strerror still exists as a define.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is useful if a proper getaddrinfo is loaded dynamically on
windows, while using the fallback implementation of gai_strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
The actual result of the check isn't used anywhere (since we
use this function unconditionally within #ifdef _WIN32), but it
makes sure we explicitly link to shell32 (which is linked in
implictly on mingw).
Signed-off-by: Martin Storsjö <martin@martin.st>
Prior to this change max number of channels for float data which was
going to be correctly decoded was 32, which is rather small
considering that exr allows multiple channel layers.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This was unnoticed on linux, since stdlib.h apparently includes
files declaring the pthread_mutex_t and pthread_cond_t types.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The pivot has to lie between 0 and base.
Check of ==base is insufficient.
Thus replace it by a proper check.
Fixes out of array write.
Fixes bug #1531.
Found-by: Piotr Bandurski <ami_stuff@o2.pl>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* dwbuiten/master:
doc: Remove stray @item from git-howto
libfdk-aac: Port to ff_alloc_packet2
doxy: move av_guess_sample_aspect_ratio to correct place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function is only available in the headers if unconditionally
targeting a version >= XP. It is not strictly necessary, since we
try loading these functions dynamically at runtime on windows in
the fallback, but this makes things a bit faster and more
straightforward.
On mingw32, this function isn't visible by default, while it is
on mingw64 (on both 32 and 64 bit).
Signed-off-by: Martin Storsjö <martin@martin.st>
This change introduces a basic decoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to parse styling information,
and just reads the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Signed-off-by: Philip Langdale <philipl@overt.org>
Testing gives 25-30% gain on HD clips with two threads and
up to 50% gain with eight threads.
Sliced threading uses more memory than single or frame threading.
Frame threading and single threading keep the previous memory
layout.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Work done for SOCIS 2011.
See thread:
Subject: [libav-devel] [PATCH 2/3] tiff: Add GeoTIFF support to the TIFF decoder
Date: Tue, 4 Oct 2011 00:19:52 +0200
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
This one will also work in cases when file have channels
we are not going to use.
Only compressed files where affected by this bug.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* qatar/master:
build: Fix APE tag dependencies
MS Expression Encoder Screen decoder
libfdk-aac: Allow setting the encoder bandwidth/cutoff frequency
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The number of pixel formats outgrew the number of available bits in
the bitmask used in avcodec_find_best_pix_fmt().
avcodec_find_best_pix_fmt2() uses a PIX_FMT_NONE terminated list
of pixel formats instead.
* qatar/master:
build: Fix Ogg demuxer dependencies
build: Fix FLAC demuxer dependencies
flac: Move flac functions shared between libraries to flac common code
build: Fix CAF demuxer dependencies
build: Fix MP2 muxer dependencies
build: Add missing build rules for the ISMV muxer
configure: Drop redundant mxf_d10 test dependency declaration
Support AAC encoding via the external library fdk-aac
libavcodec: Add more AAC profiles
dct/fft-test: use a replacement getopt() if the system has none present.
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The old files were scattered in several directories,
with an unusual name, but dependencies to the usual name,
and relative paths.
The new files are regrouped in a singled directory
(doc/examples/pc-uninstalled) with their usual name
and more absolute paths.
With this change, it becomes possible to compile the examples
with the ffmpeg build tree by setting the environment variable:
PKG_CONFIG_PATH=pc-uninstalled
This fixes decoding of certain 7.1 DTS-HD HRA files, as well as matches the spec better.
Table 6-22 in the DTS spec labels the two channels "Left/Right surround on side", and not rear.
Reviewed-by: Benjamin Larsson <benjamin@southpole.se>
Reviewed-by: Nick Brereton <nick@nbrereton.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: Check for the math function rint
TechSmith Screen Codec 2 decoder
rtsp: Add listen mode
rtsp: Make rtsp_open_transport_ctx() non-static
rtsp: Move rtsp_read_close
rtsp: Parse the mode=receive/record parameter in transport lines
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows compiling and running these tests on systems lacking a built-
in version of getopt(), such as MSVC.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
__volatile__ can cause problems with some compilers and volatile is a standard keyword.
Found-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mss1: fix decoding masked regions in interframes
mxfdec: fix off by one error.
mxfdec: only parse next partition pack if parsing forward
mxfdec: let pkt->pts = mxf->current_edit_unit if intra-only
mxfdec: fix frame height vs field height confusion
mxfdec: Add intra_only flag to MXFTrack
mxfdec: fix Avid AirSpeed files being misinterpreted as OP1a
mxfdec: truncate packets that extend past the next edit unit
mxfdec: set pixel format for cdci picture formats
mxfdec: detect uncomp pictures using essence container ul
mxfdec: set track edit rate num/den in expected order
x86/cpu: implement get/set_eflags using intrinsics
x86/cpu: implement support for cpuid through intrinsics
x86/cpu: implement support for xgetbv through intrinsics
lavu: use intrinsics for emms on systems lacking inline asm support
mem: Don't abort on av_malloc(0) in debug mode
Conflicts:
configure
libavformat/mxf.h
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds macros for accessing the EFLAGS register and uses
these instead of coding the entire check in inline asm.
Signed-off-by: Mans Rullgard <mans@mansr.com>
We cannot do this in general since we could be reading
a file with B-frames while lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This allows future assumptions to be made without affecting non-intra files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file
that triggered that behavior had two ECs, not zero. Hence
distinguishing between them is simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes rare cases where OPAtom may be treated
as OP1a, causing all essence to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
movie currently forwards EOF (or begins looping) immediately upon
reaching the last packet in the input stream, which can leave frames in
the decoder. This change first tries to read any remaining packets from
the decoder before forwarding EOF.
Signed-off-by: Steven Robertson <steven@strobe.cc>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Use the init_opaque callback for the purpose.
Fix regression introduced in a5e8c41c28. In particular, fix lavfi
device in case a conversion to the supported (packed) formats is needed.
This will be used by filters which require an opaque field to be passed
in input. Should be required only for filters which imply a programmatic
use.
This is possibly a temporary solution, to be removed when we'll have a
clearer and better agreememnt of how/if to pass binary data for
initializing a filter.
See thread:
Subject: [FFmpeg-devel][PATCH] lavfi: add init2 callback
Date: Fri, 6 Jul 2012 01:22:17 +0200
* qatar/master:
mss3: use standard zigzag table
mss3: split DSP functions that are used in MTS2(MSS4) into separate file
motion-test: do not use getopt()
tcp: add initial timeout limit for incoming connections
configure: Change the rdtsc check to a linker check
avconv: propagate fatal errors from lavfi.
lavfi: add error handling to filter_samples().
fate-run: make avconv() properly deal with multiple inputs.
asplit: don't leak the input buffer.
af_resample: fix request_frame() behavior.
af_asyncts: fix request_frame() behavior.
libx264: support aspect ratio switching
matroskadec: honor error_recognition when encountering unknown elements.
lavr: resampling: add support for s32p, fltp, and dblp internal sample formats
lavr: resampling: add filter type and Kaiser window beta to AVOptions
lavr: Use AV_SAMPLE_FMT_NONE to auto-select the internal sample format
lavr: mix: validate internal sample format in ff_audio_mix_init()
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/libx264.c
libavfilter/audio.c
libavfilter/split.c
libavformat/tcp.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cmutils: include shellapi.h on Win32 (for CommandLineToArgvW).
x86/timer: implement an intrinsic-based version for rdtsc (AV_READ_TIME).
id3v2: add a mimetype for bmp pictures.
flacdec: be less strict when parsing attached pictures.
flacdec: don't create an attached picture stream until we have all information.
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add list extended format which specifies in the list file the start and
ending time for each segment. This is required to make it available this
information to external tools, avoiding the need to perform file analysis
in the output segments.
This is required for CommandLineToArgvW. Normally, shellapi.h is included
implicitly by windows.h, but if we define WIN32_LEAN_AND_MEAN (or some of
the other earlier headers have included windows.h with that option),
windows.h doesn't include this one.
Thus explicitly include the headers we really need, for clarity and
compatibility.
Only return an error if memory allocation fails or error recognition is
set to explode. Otherwise just print an error message and continue
reading the file.
* qatar/master:
mxfdec: replace x>>av_log2(sizeof(..)) by x/sizeof(..).
x86: h264_intrapred: Don't add the 'd' suffix to the SPLATB_REG macro
Conflicts:
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
* qatar/master:
configure: add functions for testing code fragments
af_amix: avoid spurious EAGAIN.
af_amix: return AVERROR(EAGAIN) when request_frame didn't produce output.
af_amix: only consider negative return codes as errors.
avconv: use only meaningful timestamps in start time check.
avconv: fix the check for -ss as an output option.
mss3: add forgotten 'static' qualifier for private table
lavc: options: add planar names for request_sample_fmt
flacdec: add planar output support
flvdec: Treat all nellymoser versions as the same codec
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The SPLATB_REG macro already adds the 'd' suffix internally.
This fixes building on Win64, which has been broken since 878e66902.
This worked for unix, where r2 happened to be rdx in this case, which
with the first suffix rdxd was mapped to eax, and eaxd is defined back
to eax. On win64 however, r2 happened to be R8 in this case, and
R8d mapps to R8D just fine, but there's no mapping for R8Dd to anything.
Signed-off-by: Martin Storsjö <martin@martin.st>
This simplifies testing arbitrary code fragments within a function
body.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Misaligned row artifacts showed up when a 624x352 frame was converted
to BGR24 format. When advancing to the next row the destination linesize
was added to the last output pointer position which was not linesize aligned,
resulting in a distorted picture.
Signed-off-by: Pavel Koshevoy <pavel@apple.aragog.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Input on/off state can change in request_samples(), which can result in
a state where only the first input is active. get_available_samples()
will then return 0, and request_frame() will fail with EAGAIN even
though there is data on the single active input.
Take this into account and check the number of active inputs again after
calling request_samples().
* qatar/master:
qdm2: remove broken and disabled dump_context() debug function
x86: h264_intrapred: use newly introduced SPLAT* and PSHUFLW macros
x86inc: add SPLATB_LOAD, SPLATB_REG, PSHUFLW macros
x86inc: modify ALIGN to not generate long nops on i586
x86: h264_intrapred: port to cpuflag macros
avplay: update input filter pointer when the filtergraph is reset.
avconv: fix parsing of -force_key_frames option.
h264: use templates to avoid excessive inlining
xtea: Make the count parameter match the documentation
blowfish: Make the count parameter match the documentation
mpegvideo: Don't use ff_mspel_motion() for vc1
xtea: invert branch and loop precedence
blowfish: invert branch and loop precedence
flvdec: optionally trust the metadata
avconv: Set audio filter time base to the sample rate
vp8: Add ifdef guards around the sse2 loopfilter in the sse2slow branch too
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/h264.c
libavcodec/mpegvideo_common.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids creating new AVStreams for them when switching between
different variants of them, since we can handle changes between
different sample rates of nellymoser within the same stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
After some internal talks it seems the code is similar to what is in FFmbc
by Baptiste Coudurier; Baptiste accepted to relicense the similiar chunks
from GPL to LGPL.
Instead of inlining everything into ff_h264_hl_decode_mb(), use
explicit templating to create versions of the called functions
with constant parameters filled in. This greatly speeds up
compilation of h264.c and reduces the code size without any
measurable impact on performance.
Compilation time for h264.c on an i7 goes from 30s to 5.5s.
Code size is reduced by 430kB.
Signed-off-by: Mans Rullgard <mans@mansr.com>
MP3 fixed and floating point decoders are optimized
for MIPS architecture.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Reviewed-by: Vitor Sessak <vitor1001@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* git://github.com/mjbshaw/FFmpeg-OpenJPEG-J2K-Encoder:
libopenjpegdec: add support for decoding YUV420/422/444P12/14
libopenjpegenc: cosmetics: reorder pix_fmts
libopenjpegenc: add support for YUV420/422/444P12/14
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously it was interpreted as number of bytes, while the
documentation stated that it was the number of 8 byte blocks.
This makes it behave similarly to the existing AES code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously it was interpreted as number of bytes, while the
documentation stated that it was the number of 8 byte blocks.
This makes it behave similarly to the existing AES code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Using ff_mspel_motion assumes that s (a MpegEncContext
poiinter) really is a Wmv2Context.
This fixes crashes in error resilience on vc1/wmv3 videos.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
It might be easier to understand for some people and is a bit more
in line with e.g. OpenSSH documentation. The meaning of the text stays
exactly the same.
If the output frame size is smaller than the input sample rate,
and the input stream time base corresponds exactly to the input
frame size (getting input packet timestamps like 0, 1, 2, 3, 4 etc),
the output timestamps from the filter will be like
0, 1, 2, 3, 4, 4, 5 ..., leadning to non-monotone timestamps later.
A concrete example is input mp3 data having frame sizes of 1152
samples, transcoded to aac with 1024 sample frames.
By setting the audio filter time base to the sample rate, we will
get sensible timestamps for all output packets, regardless of
the ratio between the input and output frame sizes.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (29 commits)
lavfi: reclassify showfiltfmts as a TESTPROG
graph2dot: fix printf format specifier
swscale: yuv2planeX 8bit >=sse2 functions need aligned stack on x86-32.
vp8: loopfilter >=sse2 functions need aligned stack on x86-32.
amr: remove shift out of the AMR_BIT() macro.
dsputilenc: group yasm and inline asm function pointer assignment.
mov: use forward declaration of a function instead of a table.
Clarify Doxygen comment for FF_API_* #defines.
configure: simplify get_version()
Create version.h headers for libraries that lack them
gitignore: Use full path instead of relative path to specify patterns
mpegvideo: remove VLAs
Add XTEA encryption support in libavutil
Add Blowfish encryption support in libavutil
eval: Add the isinf() function and tests for it
flacdec: move lpc filter to flacdsp
flacdec: split off channel decorrelation as flacdsp
avplay: Add an option for not limiting the input buffer size
FATE: add a test for WMA cover art.
FATE: add a test for apetag cover art
...
Conflicts:
.gitignore
configure
ffplay.c
libavcodec/Makefile
libavcodec/error_resilience.c
libavcodec/mpegvideo.c
libavcodec/ratecontrol.c
libavdevice/avdevice.h
libavfilter/Makefile
libavfilter/filtfmts.c
libavfilter/version.h
libavformat/mov.c
libavformat/version.h
libavutil/Makefile
libavutil/avutil.h
libavutil/version.h
libswscale/swscale.h
libswscale/x86/swscale_mmx.c
tests/fate/libavutil.mak
tests/lavfi-regression.sh
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This tool uses lavfi internal symbols not accessible in shared
libraries. TESTPROGS are linked statically to allow them use of
library internals not normally exported.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This commit is based on libav's implementation and
makes sure to compare output timestamps together.
It also reduces the differences with avconv.
The changes to the test reference files are caused
by an additional packet at the end, the timestamp
of the frame encoded by this packet is always
strictly below the limit stated by the -t option.
This code is intended for errors in external libraries
when no corresponding error code can be found.
AVERROR_UNKNOWN is too vague for that and looks like AVERROR_BUG.
For reading from normal files on disk, the queue limits for
demuxed data work fine, but for reading data from realtime
streams, they mean we're not reading from the input stream
at all once the queue limit has been reached. For TCP streams,
this means that writing to the socket from the peer side blocks
(potentially leading to the peer dropping data), and for UDP
streams it means that our kernel might drop data.
For some protocols/servers, the server initially sends a
large burst with data to fill client side buffers, but once
filled, we should keep reading to avoid dropping data.
For all realtime streams, it IMO makes sense to just buffer
as much as we get (rather in buffers in avplay.c than in
OS level buffers). With this option set, the input thread
should always be blocking waiting for more input data,
never sleeping waiting for the decoder to consume data.
Signed-off-by: Martin Storsjö <martin@martin.st>
The buffers are only allocated once, although it can happen from
any of a few different places, so there is no need to use realloc.
Using av_malloc() ensures they are aligned suitably for SIMD
optimisations.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
cosmetics: Consistently use C-style comments with multiple inclusion guards
anm: fix a few Doxygen comments
misc typo and wording fixes
attributes: add av_noreturn
attributes: drop pointless define guards
configure: do not disable av_always_inline with --enable-small
flvdec: initial stream switch support
avplay: fix write on freed memory for rawvideo
snow: remove a VLA used for edge emulation
x86: lavfi: fix gradfun/yadif build with mmx/sse disabled
snow: remove the runs[] VLA.
snow: Check mallocs at init
flacdec: remove redundant setting of avctx->sample_fmt
Conflicts:
ffplay.c
libavcodec/h264.c
libavcodec/snow.c
libavcodec/snow.h
libavcodec/snowdec.c
libavcodec/snowenc.c
libavformat/flvdec.c
libavutil/attributes.h
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow to deal with the list file printing only in a single point, thus
simplifying logic, and allow a bit of factorization (no special case
needed when printing the first file name of the list).
In Smooth Streaming, the fragments are addressed by time, and
the manifest only stores one list of time offests for all streams,
so all streams need to have identical fragment offsets. Warn if
this isn't the case, so that the user can fix the files instead of
getting failures at runtime when the fragments can't be found.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, --enable-small turns av_always_inline into plain inline,
which is more or less ignored by the compiler. While the intent of
this is probably to reduce code size by avoiding some inlining, it
has more far-reaching effects.
We use av_always_inline in two situations:
1. The body of a function is smaller than the call overhead.
Instances of these are abundant in libavutil, the bswap.h
functions being good examples.
2. The function is a template relying on constant propagation
through inlined calls for sane code generation. These are
often found in motion compensation code.
Both of these types of functions should be inlined even if targeting
small code size.
Although GCC has heuristics for detecting the first of these types,
it is not always reliable, especially when the function uses inline
assembler, which is often the reason for having those functions in
the first place, so making it explicit is generally a good idea.
The size increase from inlining template-type functions is usually
much smaller than it seems due to different branches being mutually
exclusive between the different invocations. The dead branches can,
however, only be removed after inlining and constant propagation have
been performed, which means the initial cost estimate for inlining
these is much higher than is actually the case, resulting in GCC
often making bad choices if left to its own devices.
Furthermore, the GCC inliner limits how much it allows a function to
grow due to automatic inlining of calls, and this appears to not take
call overhead into account. When nested inlining is used, the limit
may be hit before the innermost level is reached. In some cases, this
has prevented inlining of type 1 functions as defined above, resulting
in significant performance loss.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Do not assume avpacket and the decoded frames are independent.
To be absolutely sure and not sprinkle av_free_packet around the code
the call had been placed before getting the frame and on the error path.
This script works like "git bisect" except that you can
specify with "bisect need ffmpeg|ffplay|ffserver|ffprobe" which tool(s)
are needed for testing a checkout
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The vsrc_buffer.h is not installed since commit 0b3b958135, so there is
no point into keeping it around.
The buffersrc.h API, which is more powerful, should be used instead.
This adds the minimum delay needed with the current decoder to
recognize the reorder buffer size for the reference bitstreams.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asfdec: read attached pictures.
apetag: reindent
apetag: export attached covers as video streams.
apetag: fix the amount of data read from binary tags.
apetag: make sure avio_get_str() doesn't read more than it should.
mov: read itunes cover art.
snow: remove VLA in mc_block()
intfloat: Don't use designated initializers in the public headers
snow: remove a VLA.
doc: Remind devs to check return values, especially for malloc() et al
MS ATC Screen (aka MSS3) decoder
vf_yadif: move x86 init code to x86/yadif.c
vf_gradfun: move x86 init code to x86/gradfun.c
roqvideo: Remove a totally unused dspcontext
smacker: remove some unused code
dsicin: remove dead assignment
aacdec: remove dead assignment
rl2: remove dead assignment
proresenc: make a variable local to the loop where it is used
alsdec: remove dead assignments
Conflicts:
Changelog
doc/developer.texi
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavfilter/gradfun.h
libavfilter/x86/gradfun.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
intfloat.h is a public header, and is now (since a1245d5ca) included
by mathematics.h, which many external callers include.
This fixes building third party applications that include
mathematics.h in a language that doesn't support designated
initalizers.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
opt/eval: Include mathematics.h for NAN/INFINITY
mathematics: Don't use division by zero in NAN/INFINITY macros
wma: Lower the maximum number of channels to 2
x86: cpu: clean up check for cpuid instruction support
ARM: generate position independent code to access data symbols
Conflicts:
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These files use NAN/INFINITY but didn't include mathematics.h to get
the fallback definitions if the system lacks the macros.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some compilers, MSVC among them, don't recognize the divisions by
zero as meaning infinity/nan.
These macros should, according to the standard, expand to constant
expressions, but this shouldn't matter for our usage.
Signed-off-by: Martin Storsjö <martin@martin.st>
ff_wma_init is used only by wmadec and wmaenc, and neither of them
can handle more than 2 channels.
This fixes crashes with invalid files.
Based on patch by Piotr Bandurski and Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds macros for accessing the EFLAGS register and uses
these instead of coding the entire check in inline asm.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This creates proper position independent code when accessing
data symbols if CONFIG_PIC is set.
References to external symbols should now use the movrelx macro.
Some additional code changes are required since this macro may
need a register to hold the GOT pointer.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
dsputilenc_mmx: split assignment of ff_sse16_sse2 to SSE2 section.
dnxhdenc: add space between function argument type and comment.
x86: fmtconvert: add special asm for float_to_int16_interleave_misc_*
attributes: Add a definition of av_always_inline for MSVC
cmdutils: Pass the actual chosen encoder to filter_codec_opts
os_support: Add fallback definitions for stat flags
os_support: Rename the poll fallback function to ff_poll
network: Check for struct pollfd
os_support: Don't compare a negative number against socket descriptors
os_support: Include all the necessary headers for the win32 open function
x86: vc1: fix and enable optimised loop filter
Conflicts:
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
libavformat/os_support.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows passing the right options to encoders when there's more
than one encoder for a certain codec id.
Signed-off-by: Martin Storsjö <martin@martin.st>
Mingw headers provide similar defines already (unconditional #defines,
without any #undef or #ifdef around it), while MSVC doesn't have
them.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fallback function is a non-static function, we shouldn't be
defining non-static functions outside of the proper ff/av prefix
namespaces.
This is especially important for a function like poll, which
other parties (other libraries, or executables linking these
libraries) also might provide similar but incompatible fallbacks for.
Signed-off-by: Martin Storsjö <martin@martin.st>
We need to include winsock2.h here, to make sure we have the
real pollfd struct definition, if one exists, before defining the
fallback poll function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fds are unsigned integers in the windows definition of struct
sockfds. Due to this, the comparison if (fds[i].fd > n) was always
false.
Signed-off-by: Martin Storsjö <martin@martin.st>
io.h is required for open and _wopen, and fcntl.h is required for
the O_CREAT flag. On mingw, fcntl.h is included by os_support.h (and
the mingw fcntl.h includes io.h), but include it explicitly here
since this implementation requires it.
Also move the #undef open up. open must not be defined to ff_win32_open
while including the headers that declare the open function. On mingw,
this happened in os_support.h before open was redirected.
Signed-off-by: Martin Storsjö <martin@martin.st>
The problem is that the ssse3 psign instruction does the wrong
thing here. Commit ea60dfe incorrectly removed a macro emulating
this instruction for pre-ssse3 code. However, the emulation is
incorrect, and the code relies on the behaviour of the macro.
Specifically, the psign sets destination elements to zero where
the corresponding source element is zero, whereas the emulation
only negates destination elements where the source is negative.
Furthermore, the PSIGNW_MMX macro in x86util.asm is totally bogus,
which is why the original VC-1 code had an additional right shift
when using it. Since the psign instruction cannot be used here,
skip all the macro hell and use the working instruction sequence
directly.
None of this was noticed due a stray return statement in
ff_vc1dsp_init_mmx() which meant that only the mmx version of the
loop filter was ever used (before being removed in ea60dfe).
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
file: Only include unistd.h if it exists
random_seed: Only read /dev/*random if we have unistd.h
doc: Indicate that RTMPT is natively implemented in libavformat
rtpdec: Don't explicitly include unistd.h any longer
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The "Default" style written in the header is ignored unless you explicit
it in the Dialogue events (it was valid, just ignored). This requires an
update of the SubRip test since the ASS output obviously changes.
This simplifies usage for segment streaming formats with no global
headers, tipically MPEG 2 transport stream "ts" files.
The seg class duplication is required in order to avoid an infinite loop
in libavformat/utils.c:format_child_next_class().
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
unistd.h is used for open/read/close, but if this header does not
exist, there's probably no use in trying to open /dev/*random
at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
checkheaders doesnt pass and noone has even noticed since a very
long time.
checkheaders is also unmaintained (please add yourself to MAINTAINERS
if you want to maintain it)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flv: add support for G.711
doc: git: Add checklist with test steps to perform before pushing
flvenc: K&R formatting cosmetics
movenc: Add channel layouts for PCM.
Conflicts:
libavformat/flvenc.c
tests/ref/fate/acodec-pcm-s16be
tests/ref/fate/acodec-pcm-s24be
tests/ref/fate/acodec-pcm-s32be
tests/ref/fate/acodec-pcm-s8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Below fixes the maximum reference count check for second reference list in
non-B frames. There is nothing to prohibit full (field sized) reference
list in this case as far as I can tell, and this fixes several syntax-test
files here (this is a regression caused when this check was made more
stringent by
http://git.videolan.org/?p=ffmpeg.git;a=commit;h=dc9ce40069bde3d28f8d0b3e5bd733ae255fecb5)
Probably a silly corner case seldom seen irl, but thought I'd pass along
in case there was interest in correcting the check.
---------------
h264: Fix maximum reference count check for non-b frames; full range is
technically ok
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using -t on an input already have surprising results.
Furthermore, using it on an input or an output makes
a real difference if there are speed-altering filters.
Implementing -t for inputs will probably result in some
behavour changes.
The warning silenced was: libavfilter/af_amerge.c:144:29: warning: conversion specifies type 'long long' but the argument has type 'int' [-Wformat]
The warning was introduced after FF_API_SAMPLERATE64 removal.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* qatar/master:
mss1: validate number of changeable palette entries
mss1: report palette changed when some additional colours were decoded
x86: fft: replace call to memcpy by a loop
udp: Support IGMPv3 source specific multicast and source blocking
dxva2: include dxva.h if found
libm: Provide fallback definitions for isnan() and isinf()
tcp: Pass NULL as hostname to getaddrinfo if the string is empty
tcp: Set AI_PASSIVE when the socket will be used for listening
Conflicts:
configure
libavcodec/mss1.c
libavformat/udp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The blue is difficult to read on several peoples terminals with black background.
Idea-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
avcodec_encode_audio2 docs are ambiguous about avpkt->destruct and imply
it gets reset.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The function call was a mess to handle, and memcpy cannot make
the assumptions we do in the new code.
Tested on an IMC sample: 430c -> 370c.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Apparently, some build environments require dxva.h even for dxva2,
while others lack this header entirely. Including it conditionally
allows building in both cases.
Signed-off-by: Martin Storsjö <martin@martin.st>
This gives you the proper v4 or v6 version of the "any address",
allowing receiving connections on any address on the machine.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avconv: add an assert to silence an uninitialized variable warning.
avconv: shut up an uninitialized variable warning.
avfiltergraph: shut up uninitialized variable warning.
af_join: initialize a variable to shut up gcc warning.
amix: fix format specifier for AVFilterLink.sample_rate.
lavfi: make filters less verbose.
mpc8: read APE tags.
lavr: x86: fix ff_conv_fltp_to_flt_6ch function prototypes
libm: provide fallback definition for cbrtf() using powf()
network: Don't redefine error codes if they already exist in errno.h
configure: Check for sys/time.h
network: Include unistd.h from network.h
avconv: don't include vsrc_buffer.h, which doesn't exist anymore
lavfi: reorder AVFilterLink fields.
lavfi: reorder AVFilterContext fields.
lavfi: reorder AVFilter fields.
lavfi: reorder AVFilterBufferRef fields.
lavfi: reorder AVFilterBuffer fields.
Conflicts:
configure
libavcodec/v210dec.h
libavfilter/asrc_anullsrc.c
libavfilter/avfilter.h
libavfilter/buffersrc.c
libavfilter/src_movie.c
libavfilter/vf_aspect.c
libavfilter/vf_crop.c
libavfilter/vf_drawbox.c
libavfilter/vf_fade.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vsrc_color.c
libavformat/network.h
libavutil/libm.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a5e8c41c28f907d98d2a739db08f7aef4cbfcf3a':
lavfi: remove 'opaque' parameter from AVFilter.init()
mov: do not try to read total disc/track number if data atom is too short.
avconv: fix -force_key_frames
dxva2_h264: fix signaling of mbaff frames
x86: fft: elf64: fix PIC build
Conflicts:
ffmpeg.c
libavcodec/v210dec.h
libavfilter/asrc_anullsrc.c
libavfilter/buffersrc.c
libavfilter/src_movie.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_overlay.c
libavfilter/vsrc_color.c
libavfilter/vsrc_testsrc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The warning silenced was:
avconv.c: In function ‘opt_output_file’:
avconv.c:3380:21: warning: ‘meta_out’ may be used uninitialized in this function [-Wuninitialized]
avconv.c:3315:20: note: ‘meta_out’ was declared here
The warning silenced was:
avconv.c: In function ‘configure_filtergraph’:
avconv.c:603:8: warning: ‘ist’ may be used uninitialized in this function [-Wuninitialized]
avconv.c:549:18: note: ‘ist’ was declared here
The warning silenced was:
libavfilter/avfiltergraph.c: In function ‘avfilter_graph_config’:
libavfilter/avfiltergraph.c:500:13: warning: ‘best_idx’ may be used uninitialized in this function [-Wuninitialized]
The warning silenced was:
libavfilter/af_join.c: In function ‘join_request_frame’:
libavfilter/af_join.c:451:9: warning: ‘nb_samples’ may be used uninitialized in this function [-Wuninitialized]
Free packets unconditionally after demuxing, and not only when the
packets belong to a given stream.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Changed to match the number of parameters in conv_func_interleave(), which is
how they are called. The change isn't strictly necessary because the 4th
parameter is not used, but the code is clearer if they match.
This adds a fallback for cbrtf() using powf(x, 1/3). Since
powf() with a non-integer exponent requires a non-negative
base, special handling of negative inputs is needed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Since the errno.h values don't match the error codes that winsock
returns, map the winsock error codes to the errno ones, to make
sure explicit checks against AVERROR(x) match.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently this include is needed on some systems for building the
poll fallback (for the timeval struct for select?), but it isn't
available on all systems. Thus only include it if it exists.
Signed-off-by: Martin Storsjö <martin@martin.st>
This heaader is required for close() for sockets in network
code. For winsock, the equivalent function is defined in the
winsock2.h header.
This avoids having the HAVE_UNISTD_H in all files dealing with
raw sockets.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is not used in any filters currently and is inherently evil. If
passing binary data to filters is required in the future, it should be
done with some AVOptions-based system.
Move the lavc/imgconvert functions and rename them as follows:
avpicture_get_size -> av_image_get_buffer_size()
avpicture_fill -> av_image_fill_arrays()
avpicture_layout -> av_image_copy_to_buffer()
The new functions have an align parameter, which allows to define the
linesize alignment assumed in the buffer (which is set or read).
The names of the functions are consistent with the lavu/samples API
(av_samples_get_buffer_size(), av_samples_fill_arrays()).
The MBAFF flag may only be signaled if we're actually dealing with
a full frame, and not singular fields, as it can happen in mixed content.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is required for isatty, which exists on MSVC and is found by
configure, but is provided by io.h instead of unistd.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds whitespace around operators, aligns line continuation
backslashes, and breaks long lines. Also fixes an ifdef halfway
through a statement. The one line of duplication this saved is
not worth the ugliness.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
wtv: Check the return value from gmtime
x86: fft: convert sse inline asm to yasm
x86: place some inline asm under #if HAVE_INLINE_ASM
Conflicts:
libavcodec/x86/fft_sse.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On MSVC, gmtime returns NULL for values outside of their supported
range (and these show up in our fate test). This doesn't seem
to affect the actual fate test result.
Signed-off-by: Martin Storsjö <martin@martin.st>
Deprecate functions:
avfilter_fill_frame_from_buffer_ref
avfilter_fill_frame_from_audio_buffer_ref
avfilter_fill_frame_from_video_buffer_ref
and schedule to drop them at the next API major bump.
The function avfilter_copy_buf_props() should be used instead.
libavfilter API was designed in order to be clarly distinguished from the
libavcodec API, including avcodec.h in avfilter.h is not going to help to
stick to this principle.
The inclusion of libavutil/audioconvert.h in many files was required
because avcodec.h includes audioconvert.h.
libavfilter/avcodec.h is where the lavc/lavfi interface should be
entirely placed.
* qatar/master:
log: Only include unistd.h if configure found it
ape: create audio stream before reading tags.
mov: make a length variable larger.
image2: Add "start_number" private option to the demuxer
image2: Add "start_number" private option to the muxer
avconv: remove a forgotten debugging printf.
avconv: use more descriptive names for hardcoded filters.
avconv: remove redundant handling of async.
doc/filters: fix typo.
h264: use asm cabac reader under a generic condition
Conflicts:
ffmpeg.c
libavformat/img2dec.c
libavformat/img2enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently if a pattern is given we search for up to the fifth file name in
that sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
MSVC has isatty (in io.h), but not unistd.h. (isatty isn't called
at all for windows, since there's a special case block for that.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently if a pattern is given we look for up to the fifth file name in
the sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds the capability to start counting file number from an arbitrary
integer.
This includes a few lines of trivial code from FFmpeg codebase.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Because of a mistake during merging the code for simple and complex
filtergraphs, -async inserts an asyncts filter both on input and output.
Remove the output hunk.
The MBAFF flag may only be signaled if we're actually dealing with
a full frame, and not singular fields, as it can happen in mixed content.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: Only use optimizations with cmov if the CPU supports the instruction
x86: Add CPU flag for the i686 cmov instruction
x86: remove unused inline asm macros from dsputil_mmx.h
x86: move some inline asm macros to the only places they are used
lavfi: Add the af_channelmap audio channel mapping filter.
lavfi: add join audio filter.
lavfi: allow audio filters to request a given number of samples.
lavfi: support automatically inserting the fifo filter when needed.
lavfi/audio: eliminate ff_default_filter_samples().
Conflicts:
Changelog
libavcodec/x86/h264dsp_mmx.c
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/version.h
libavutil/x86/cpu.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This removes a dependency on implementation details from generic
code and allows easy addition of the equivalent optimisation for
other architectures than x86.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds the capability to start counting file number from an arbitrary
integer instead of always starting at 1.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Compared to the decoder side, this code is able to change both the
delay and the number of threads seamlessly during encoding. Also
any idle thread can pick up tasks, the strict round robin in order
limit is gone too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix warning:
ffplay.c:1578:40: warning: passing argument 5 of ‘avfilter_graph_create_filter’ discards ‘const’ qualifier from pointer target type [enabled by default]
libavfilter/avfiltergraph.h:84:5: note: expected ‘void *’ but argument is of type ‘const enum PixelFormat *’
* qatar/master:
libspeexenc: add supported sample rates and channel layouts.
Replace usleep() calls with av_usleep()
lavu: add av_usleep() function
utvideo: mark interlaced frames as such
utvideo: Fix interlaced prediction for RGB utvideo.
cosmetics: do not use full path for local headers
lavu/file: include unistd.h only when available
configure: check for unistd.h
log: include unistd.h only when needed
lavf: include libavutil/time.h instead of redeclaring av_gettime()
Conflicts:
configure
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/utvideo.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It currently does the following:
1) get a zeroed audio buffer
2) copy some properties (but not the data) of the input buffer to it
3) pass this buffer to the output filter
This looks useless and is indeed not used by any filters, therefore
delete it.
Make ff_null_filter_samples() (just pass the buffer to the next filter)
the new default.
The string passed to av_vlog() from libx264's X264_log overflows the 512
byte part_size, truncating x264 parameter output. Double this size
and put it in a #define so it only needs to be changed in one place.
Signed-off-by: Wolfram Gloger <video06@malloc.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This function implements a delay using the first available
of the following functions:
- nanosleep()
- usleep()
- Sleep() (Windows)
The conditional #includes in time.c are simplified by including
unistd.h and windows.h whenever they are available rather than
having these lines triggered by specific functions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This reverts commit a2b186a188.
The defines were present for several years, removing
them without a version bump may break API.
(Fixes MPlayer compilation.)
To ensure the full range of values is still used, also adjust all uses of this function to loop from 0
instead of 1. This way only 60.00 is added and nothing lost.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
-same_quant is not designed to convert between quantizer scales, AFAIK.
Add example using concat protocol.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The unistd.h header is only needed for the close() declaration.
If this header is not available, the close() declaration may be
provided by another header, e.g. io.h.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The only symbol this file uses from unistd.h is isatty(). By
including the header only when this function is used, the file
can be built on systems without unistd.h (which presumably also
lack isatty).
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
fix hardcoded tables compililation caused by missing math constants
lavf: Make codec_tag arrays constant
twinvq: give massive struct a name.
lavf, lavu: version bumps and APIchanges for av_gettime() move
lavfi/audio: don't set cur_buf in ff_filter_samples().
lavfi/fifo: add audio version of the fifo filter.
fifo: fix parenthesis placement.
lavfi: rename vf_fifo.c -> fifo.c
lavc: remove stats_in from AVCodecContext options table.
Conflicts:
doc/APIchanges
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/audio.c
libavfilter/fifo.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This muxer supports CODEC_ID_SRT with the timestamps in the packet data
and CODEC_ID_TEXT with the timestamps in the packet fields.
Makes -scodec copy work from Matroska.
The list was set to avfilter_all_channel_layouts,
which is really all common channel layouts.
Not setting it leaves an empty list,
which now means really all.
The decoder configuration initializes the sbr mdct, which needs to know about the sample format to properly take the scale factor into account.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add request_frame() which checks the black duration when the end of the
stream is signalled. Allow to detect black video segments at the end of
the stream.
Note that the reported last black video segment duration is not very
accurate, since we still miss the duration information in the video
buffer.
Address trac ticket #1470.
It's redundant, since the input buffer is passed as a parameter to the
filter_samples() callback, and can lead to stale pointers remaining on
the link.
Its documentation states that it is allocated/freed by the caller, but
it is declared as an AV_OPT_TYPE_STRING AVOption. Since
367732832f the AVOptions system frees
strings automatically. This can be considered an API break, since it
won't work when the caller doesn't use av_malloc() to allocate the
memory or wants to use the string after closing the codec.
Since there is not much value in this field being an AVOption, the best
solution is to remove it from the options table.
mirror() borrowed from dwt.c, this could be moved to libavutil and made
public API, Ill submit a patch for this
Fixes Ticket1278
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Libav.org has removed this while moving the code around
For reference, the code was originally added in:
commit 9aeeeb63f7
Author: Fabrice Bellard <fabrice@bellard.org>
Date: Wed Dec 20 00:02:47 2000 +0000
Initial revision
Originally committed as revision 2 to svn://svn.ffmpeg.org/ffmpeg/trunk
--
The function name originates from:
commit 9498853132
Author: Fabrice Bellard <fabrice@bellard.org>
Date: Thu Jul 25 16:01:46 2002 +0000
more consistent naming
Originally committed as revision 802 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MS Screen 1 decoder
aacdec: Fix popping channel layouts.
av_gettime: support Win32 without gettimeofday()
Use av_gettime() in various places
Move av_gettime() to libavutil
dct-test: use emms_c() from libavutil instead of duplicating it
mov: fix operator precedence bug
mathematics.h: remove a couple of math defines
Remove unnecessary inclusions of [sys/]time.h
lavf: remove unnecessary inclusions of unistd.h
bfin: libswscale: add const where appropriate to fix warnings
bfin: libswscale: remove unnecessary #includes
udp: Properly check for invalid sockets
tcp: Check the return value from getsockopt
network: Use av_strerror for getting error messages
udp: Properly print error from getnameinfo
mmst: Use AVUNERROR() to convert error codes to the right range for strerror
network: Pass pointers of the right type to get/setsockopt/ioctlsocket on windows
rtmp: Reduce the number of idle posts sent by sleeping 50ms
Conflicts:
Changelog
configure
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dct-test.c
libavcodec/version.h
libavformat/riff.c
libavformat/udp.c
libavutil/Makefile
libswscale/bfin/yuv2rgb_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
While these defines are not defined by the C standard they are
standardized as X/Open System Interfaces Extension. We use the
appropiate _XOPEN_SOURCE define to make them available. They
seem to be available on all FATE configs since the constants
are used in files where mathematics.h is not included.
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also use ff_neterrno() instead of errno directly (which doesn't work
on windows), for getting the error code.
Signed-off-by: Martin Storsjö <martin@martin.st>
getnameinfo doesn't set errno on failure, it returns an error code,
which should be handled by gai_strerror instead of the normal
strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
Rtmpt is effectively half duplex - the server can't return any
data unless we send a request (to which the server responds). If
we don't have any data to send currently, and the server didn't
return any data either, wait a little before doing the next request.
This avoids busy looping with idle posts with empty replies, while
waiting for more data from the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Reduce audio fragment alignment jitter by penalizing alignment
correction offsets that deviate too much from the target offset.
This is accomplished by multiplying the cross correlation search
window with a quadratic function.
Signed-off-by: Pavel Koshevoy <pavel@homestead.aragog.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way the filters which are semantically closer to the codec layer
have a (subjectively to me) more similar color.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use av_frame_* accessors for the newly added fields in AVFrame (for which
we are supposed to use such accessors), and group the istructions
accordingly.
The check uses check_func_header, since this function is
conditionally available depending on the targeted MSVCRT
version.
Signed-off-by: Martin Storsjö <martin@martin.st>
The documentation states that av_image_check_size() will return a
negative value in case of error, while the check is done on ret != 0.
Also return a proper error code rather than -1 in case the check fails.
Add a new option 'rtmp_flush_interval' that allows specifying the
number of packets to write before sending it off as a HTTP request.
This is mostly relevant for RTMPT - for plain RTMP, it only controls
how often we check the socket for incoming packets, which shouldn't
affect the performance in any noticeable way.
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to be the correct mode to send, according to the
original RTSP RFC, and matches the method RECORD which is
sent later when starting to send data.
Darwin Streaming Server works fine with either of them.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
lavr: add x86-optimized functions for mixing 1-to-2 s16p with flt coeffs
lavr: add x86-optimized functions for mixing 1-to-2 fltp with flt coeffs
Add Dolby/DPLII downmix support to libavresample
vorbisdec: replace div/mod in loop with a counter
fate: vorbis: add 5.1 surround test
rtpenc: Allow requesting H264 RTP packetization mode 0
configure: Sort the library listings in the help text alphabetically
dwt: remove variable-length arrays
RTMPT protocol support
http: Properly handle chunked transfer-encoding for replies to post data
http: Fail reading if the connection has gone away
amr: Mark an array const
amr: More space cleanup
rtpenc: Fix memory leaks in the muxer open function
Conflicts:
Changelog
configure
doc/APIchanges
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
about 2-5 times faster than gnu libcs qsort()
And should be 100% binary identical across platforms.
I will bump the version once the API is certainly stable and
everyone is happy with the API.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This requires all NAL units to fit within single RTP packets. It
doesn't change the actual packetization for packets that fit, but
errors out and gives a helpful hint if the NAL units would have to
be split, and signals the right packetization mode in the SDP.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cus/stable:
ffplay: fix -vismv 1
ffplay: rename buffer source instance from "src" to "ffplay_buffer"
ffplay: use key=val syntax for the buffersrc args
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPT protocol implementation uses rtmphttp:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can happen if doing a new request using the same socket,
but the new request failed, which clears the urlcontext.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add spaces around operators, fix brace placement and whitespace to
match K&R style, vertically align code, remove redundant != 0 and
convert x == 0 into !x, drop useless braces.
Signed-off-by: Martin Storsjö <martin@martin.st>
While here:
- add missing .version and .category,
- make .class_name consistent across filters,
- align declarations.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Add atempo audio filter for adjusting audio tempo without affecting
pitch. This filter implements WSOLA algorithm with fast cross
correlation calculation in frequency domain.
Signed-off-by: Pavel Koshevoy <pavel@homestead.aragog.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Defining restrict results - for some compilers - in changing other
uses of the restrict keyword also, e.g. __declspec(restrict) gets
changed to __declspec(__restrict) on MSVC. This causes compilation
failures. Therefore, using a private namespace macro instead is
more reliable and robust.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flacdec: read attached pictures.
lavf: don't segfault when a NULL filename is passed to avformat_open_input()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This can easily happen when the caller is using a custom AVIOContext.
Behave as if the filename was an empty string in this case.
CC: libav-stable@libav.org
Basically to make code clearer and adherent to the
standard. RFC 1321, on page 2 states
Let the symbol "+" denote addition of words (i.e., modulo-2^32
addition). Let X <<< s denote the 32-bit value obtained by circularly
shifting (rotating) X left by s bit positions.
on page 3, section 3.3 states:
A four-word buffer (A,B,C,D) is used to compute the message digest.
Here each of A, B, C, D is a 32-bit register.
so the algorithm needs to work with integers that are exactly 32bits
in length. And indeed in struct AVMD5 the MD buffer is declared as
"uint32_t ABCD[4];", while in the function that performs the block
transformation the state variables were "unsigned int"s. On
architectures where sizeof(unsigned int) != sizeof(uint32_t) this
could be a problem, although I can't name such an architecture from
the top of my head.
On a side note, both the reference implementation in RFC 1321 and the
gnulib implementation (used by md5sum program on GNU systems) use
uint32_t in the transform function.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Remove duplicated out-of-loop init code, and do color matrix
initialization at the beginning of each y iteration.
Allow factorization and avoid an useless matrix update in the last
iteration.
The previous table appears to be wrong (it was copied from the original
MPlayer super2xsai filter in order to keep binary compatibility).
The new table is consistent with the init code and apparently fixes a
combing artifact on the left edge of the generated image.
Use the same values of the video output link.
Avoid the need to override the default_start_frame() with an ad-hoc
start_frame() callback.
In particular, fix the super2xsai filter which was setting the
input w/h values in the output.
The function will abort through an assert if the source is not defined,
or if the internal state of the source is inconsistent (e.g. type = AUDIO
&& !src->audio).
* qatar/master:
af_resample: fix format modifier in debug string for FF_API_SAMPLERATE64
segment: remove unnecessary <strings.h> include
fate: add snow hpel tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
as it breaks ICC:
libavcodec/libavcodec.a(snowenc.o): In function `encode_q_branch':
/home/fate/x86_64-linux-gnu-icc-2011.4.191/src/libavcodec/snowenc.c:405: undefined reference to `ff_epzs_motion_search'
/home/fate/x86_64-linux-gnu-icc-2011.4.191/src/libavcodec/snowenc.c:414: undefined reference to `ff_get_mb_score'
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
currently a overflow there should be impossible but future changes to
the code could easily introduce a bug that no longer limits the 2
values sufficiently so better protect it via av_assert.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Avoid C99 variable declarations within for statements.
rtmp: Read and handle incoming packets while writing data
doc: document THREAD_TYPE fate variable
rtpdec: Don't require frames to start with a Mode A packet
avconv: don't try to free threads that were not initialized.
Conflicts:
doc/fate.texi
ffplay.c
libavdevice/dv1394.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure all incoming packets are read and handled (and reacted
to) while sending an FLV stream over RTMP to a server. If there were
enough incoming data to fill the TCP buffers, this could potentially
make things block at unexpected places. For the upcoming RTMPT support,
we need to consume all incoming data before we can send the next
request.
Signed-off-by: Martin Storsjö <martin@martin.st>
While there is no reason for starting a frame with anything else
than a Mode A packet, some senders seem to consistently use Mode B
packets for everything. This fixes depacketization of such streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtmp: Add a new option 'rtmp_buffer', for setting the client buffer time
rtmp: Set the client buffer time to 3s instead of 0.26s
rtmp: Handle server bandwidth packets
rtmp: Display a verbose message when an unknown packet type is received
lavfi/audio: use av_samples_copy() instead of custom code.
configure: add all filters hardcoded into avconv to avconv_deps
avfiltergraph: remove a redundant call to avfilter_get_by_name().
lavfi: allow building without swscale.
build: Do not delete tests/vsynth2 directory, which is no longer created.
lavfi: replace AVFilterContext.input/output_count with nb_inputs/outputs
lavfi: make AVFilterPad opaque after two major bumps.
lavfi: add avfilter_pad_get_type() and avfilter_pad_get_name().
lavfi: make avfilter_get_video_buffer() private on next bump.
jack: update to new latency range API as the old one has been deprecated
rtmp: Tokenize the AMF connection parameters manually instead of using strtok_r
ppc: Rename H.264 optimization template file for consistency.
lavfi: add channelsplit audio filter.
golomb: check remaining bits during unary decoding in get_ur_golomb_jpegls()
sws: fix planar RGB input conversions for 9/10/16 bpp.
Conflicts:
Changelog
configure
doc/APIchanges
ffmpeg.c
libavcodec/golomb.h
libavcodec/v210dec.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/asrc_anullsrc.c
libavfilter/audio.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
libavfilter/formats.c
libavfilter/version.h
libavfilter/vf_frei0r.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/video.h
libavfilter/vsrc_color.c
libavformat/rtmpproto.c
libswscale/input.c
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This factorizes existing code into a new function gen_buffer_time(),
which generates the client buffer time message and sends it to the
server.
Signed-off-by: Martin Storsjö <martin@martin.st>
avcodec.c is where it is defined the lavc/lavfi interface code, so seems
a more adequate location (and doesn't force the inclusion of
libavcodec/avcodec.h where it is not required).
Fixes infinite loop in FLAC decoding in case of a truncated bitstream due to
the safe bitstream reader returning 0's at the end.
Fixes Bug 310.
CC:libav-stable@libav.org
* qatar/master:
avfilter: Log an error if avfilter fails to configure a link.
avconv: support only native pthreads.
rtmp: Fix a possible access to invalid memory location when the playpath is too short.
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an issue with a crazy data track starting with a large
negative timestamp.
It could as well be solved in all user apps, but this is looking
attractively simpler ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The value returned by strerror_r may be positive depending on the system,
so it is necessary to use AVERROR() in order to get a negative
number. This way the successive negative check will not fail, and the
function will print a meaningful error message on the buffer.
* qatar/master:
rtmp: Do not send extension for flv files
rtmp: support connection parameters
doc: Add documentation for the newly added rtmp_* options
Merged-by: Michael Niedermayer <michaelni@gmx.at>
AMR NB and WB decoders are optimized for MIPS architecture.
Appropriate Makefiles are changed accordingly.
Cnfigure script is changed in order to support optimizations.
Optimizations are enabled by default when compiling is done for
mips architecture.
Appropriate cflags are automatically set.
Support for several mips CPUs is added in configure script.
New ffmpeg options are added for disabling optimizations.
The FFMPEG option --disable-mipsfpu disables MIPS floating point
optimizations.
The FFMPEG option --disable-mips32r2 disables MIPS32R2
optimizations.
The FFMPEG option --disable-mipsdspr1 disables MIPS DSP ASE R1
optimizations.
The FFMPEG option --disable-mipsdspr2 disables MIPS DSP ASE R2
optimizations.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Reviewed-by: Vitor Sessak <vitor1001@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allow using connection parameters in order to append arbitrary
AMF data like "B:1 S:authMe O:1 NN:code:1.23 NS:flag:ok O:0" to the
Connect message. You can pass these parameters through the -rtmp_conn
option.
Signed-off-by: Martin Storsjö <martin@martin.st>
The new code is faster and reuses the previous state in case of
multiple calls. For testing the iterations are reduced and several
entropy sources are disabled.
Its based on SHA-1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Apple softwares seem not to add a tref for the timecode (the next commit
fixes this issue), but at least FFmpeg does.
This can be used to generate a sample that demonstrates the feature:
./ffmpeg -f lavfi -i testsrc \
-f lavfi -i mptestsrc \
-f lavfi -i rgbtestsrc \
-map 0 -map 1 -map 2 \
-metadata:s:0 timecode=00:00:00:12 \
-metadata:s:2 timecode=01:02:12:20 \
-t 10 -y out.mov
./ffprobe out.mov
The timecode metadata being transmitted to the video streams, it can be
kept while transmuxed/transcoded.
* qatar/master:
libmp3lame: add missing layout terminator
avconv: multithreaded demuxing.
Bump lavu minor and add an APIChanges entry for audioconvert functions.
audioconvert: add a function for extracting the channel with the given index
audioconvert: add a function for getting the name of a single channel.
audioconvert: add a function for getting channel's index in layout
audioconvert: use av_popcount64 in av_get_channel_layout_nb_channels
vf_libopencv: add missing headers.
iac: add missing dependency
Conflicts:
configure
doc/APIchanges
ffmpeg.c
libavcodec/libmp3lame.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Return a const char *, fix warnings:
libavfilter/avfilter.c: In function ‘default_filter_name’:
libavfilter/avfilter.c:414:5: warning: return discards ‘const’ qualifier from pointer target type [enabled by default]
libavfilter/avfilter.c: At top level:
libavfilter/avfilter.c:419:5: warning: initialization from incompatible pointer type [enabled by default]
libavfilter/avfilter.c:419:5: warning: (near initialization for ‘avfilter_class.item_name’) [enabled by default]
When there are multiple input files, run demuxing for each input file in
a separate thread, so reading packets does not block.
This is useful for achieving low latency when reading from multiple
(possibly slow) input streams.
Its only used through the start_frame pointer and thus cannot be inlined easily.
It also appears to break compilation with some unidentified compiler on darwin.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is based on:
commit 30f515091c
Author: Mans Rullgard <mans@mansr.com>
h264: allow cropping to AVCodecContext.width/height
The above commit is not taken as is as its buggy (incorrect handling of
the interlaced case) and didnt apply cleanly.
Fixes ticket156
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: allow cropping to AVCodecContext.width/height
mov: set AVCodecContext.width/height for h264
iac: generate codec tables as they are supposed to be
indeo4: handle frame type 1 properly
lavu: change versioning script to include all av* prefixed symbols
Conflicts:
libavcodec/h264.c
libavutil/libavutil.v
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Original code comes from:
commit eb4825b5d4
Author: Loren Merritt <lorenm@u.washington.edu>
Date: Thu Aug 10 19:06:25 2006 +0000
sse and 3dnow implementations of float->int conversion and mdct windowing.
15% faster vorbis.
and
commit 0bde73d907
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Tue May 17 19:02:43 2005 +0000
Vorbis decoder by (Balatoni Denes | dbalatoni programozo hu)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The attribution was removed by libav while moving the code to libavutil
The original code is from
commit eb4825b5d4
Author: Loren Merritt <lorenm@u.washington.edu>
Date: Thu Aug 10 19:06:25 2006 +0000
sse and 3dnow implementations of float->int conversion and mdct windowing.
15% faster vorbis.
and
commit 069720565c
Author: Loren Merritt <lorenm@u.washington.edu>
Date: Fri Aug 11 18:19:37 2006 +0000
vorbis simd tweaks
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Override the frame size from the SPS with AVCodecContext values
if the latter specify a size smaller by less than one macroblock.
This is required for correct cropping of MOV files from Canon cameras.
Signed-off-by: Mans Rullgard <mans@mansr.com>
With complex filters, an output can come from any input,
or several inputs, including inputs of a different type.
Copying the codec parameters from the first input with
the same type does not make any sense.
This does not change anything for simple 1->1 filters,
as source_index is set in that case.
Unlike its predecessor, Indeo Audio codec generates tables depending on
sampling rate. Previously decoder used pre-generated tables for 22050 Hz
which obviously doesn't work with other frequencies.
Many thanks to Maxim Poliakovsky for providing all needed information
for this.
* cus/stable:
ffplay: reset AVFrame to defaults before decoding each new frame.
ffplay: check return code of avcodec_decode_video2()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
float_dsp: ppc: add a separate header for Altivec function prototypes
ARM: fix float_dsp breakage from d5a7229
Add a float DSP framework to libavutil
PPC: Move types_altivec.h and util_altivec.h from libavcodec to libavutil
ARM: Move asm.S from libavcodec to libavutil
vc1dsp: mark put/avg_vc1_mspel_mc() always_inline
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes: ffplay -f lavfi -i cellauto
This was a regression since factorizing the filter code with ffmpeg.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Marton Balint <cus@passwd.hu>
This message is printed whenever the RAWVIDEO codec is used, whether the
output file contains any frames or not. Test command:
./ffmpeg -i infile.y4m outfile.y4m
Signed-off-by: Mike Scheutzow <mjs973@optonline.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that these functions are inlined into the per-position
entry points, allowing constant propagation as needed for proper
optimisation.
18% faster VC1 decoding on Cortex-A9.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* cus/stable:
ffplay: fix build if avfilter is disabled
ffplay: fix frame_delay calculation in new avfilter code
ffplay: add support for changing pixel format
ffplay: add missing filt_in assignment after video filter reconfigure
ffplay: fix frame aspect ratio after qatar merge
ffplay: fix use after free
ffplay: use dummy video driver if display is disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A number of systems do not implement freopen() with a NULL filename
correctly. This changes these programs to output individual images
if opening a named output argument as a file fails, in this case
assuming it is a directory.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The function was introduced in 4d6a8a2bdb and is not used anymore
outside avfilter.c.
This avoids to pollute the public API with an apparently unnecessary
function. The function was introduced a few days ago, so removing it from
the public API should do no much harm.
Currently, we don't set the duration on the packet of a newly
encoded subtitle. This information may be required by the
muxer.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes terminal messup in case of crashes (like in make fate)
Reviewed-by: François Revol <revol@free.fr>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vorbis: Validate that the floor 1 X values contain no duplicates.
avprobe: Identify codec probe failures rather than calling them unsupported codecs.
avformat: Probe codecs at score 0 on buffer exhaustion conditions.
avformat: Factorize codec probing.
Indeo Audio decoder
imc: make IMDCT support stereo output
imc: move channel-specific data into separate context
lavfi: remove request/poll and drawing functions from public API on next bump
lavfi: make avfilter_insert_pad and pals private on next bump.
lavfi: make formats API private on next bump.
avplay: use buffersrc instead of custom input filter.
avtools: move buffer management code from avconv to cmdutils.
avconv: don't use InputStream in the buffer management code.
avconv: fix exiting when max frames is reached.
mpc8: fix maximum bands handling
aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.
Conflicts:
Changelog
cmdutils.h
ffmpeg.c
ffplay.c
ffprobe.c
libavcodec/avcodec.h
libavcodec/mpc8.c
libavcodec/v210dec.h
libavcodec/version.h
libavcodec/vorbisdec.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/buffersrc.c
libavfilter/formats.c
libavfilter/src_movie.c
libavfilter/vf_aspect.c
libavfilter/vf_blackframe.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_cropdetect.c
libavfilter/vf_delogo.c
libavfilter/vf_drawbox.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_fifo.c
libavfilter/vf_format.c
libavfilter/vf_frei0r.c
libavfilter/vf_gradfun.c
libavfilter/vf_hflip.c
libavfilter/vf_hqdn3d.c
libavfilter/vf_libopencv.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_showinfo.c
libavfilter/vf_transpose.c
libavfilter/vf_unsharp.c
libavfilter/vf_yadif.c
libavfilter/vsrc_color.c
libavfilter/vsrc_testsrc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
I changed the *_set_common_* functions to only set unset formats, then
added a wrapper that calls them after the filters query_formats.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
We do not allow user filters, so avtools shouldn't use them either.
It also allows to reuse buffer management code from avconv, thus
reducing duplication.
In Musepack SV8 codec property tell the maximum nonzero band, but every
frame codes maximum band as a limit (i.e. strictly less than given value).
Synthesis also expects maximum nonzero band, so there's a need to convert
frame maximum band limit value.
register starvation caused gcc4.2 to fail building 32 bit shared libs
on 64 bit OS X
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
ffplay: calculate audio diff threshold based on the actual settings
ffplay: try more channel count combinations for SDL_OpenAudio
ffplay: simplify audio_open, rename parameters to more explanatory names
ffplay: remove VideoState from audio_open
ffplay: put audio parameters to their own struct
ffplay: put audio_open into a seperate function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
movenc: Write chan atom for all audio tracks in mov mode movies.
mpegtsenc: use avio_open_dyn_buf(), zero pointers after freeing
doc/avconv: add some details about the transcoding process.
avidec: make scale and rate unsigned.
avconv: check output stream recording time before each frame returned from filters
avconv: split selecting input file out of transcode().
avconv: split checking for active outputs out of transcode().
avfiltergraph: make some functions static.
Conflicts:
ffmpeg.c
libavfilter/avfiltergraph.c
libavfilter/internal.h
libavformat/mpegtsenc.c
tests/ref/fate/acodec-alac
tests/ref/fate/acodec-pcm-s16be
tests/ref/fate/acodec-pcm-s24be
tests/ref/fate/acodec-pcm-s32be
tests/ref/fate/acodec-pcm-s8
tests/ref/lavf/mov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts 78da04384a6c22820518706d84631006d31a85ea; it is not
required anymore since the previous commit (these extended checks were
for the -timecode option in both muxers and encoders), and reduces the
diff with the fork.
Some demuxers set a timecode in the format or streams metadata. The
muxers now make use of this metadata instead of a duplicated private
option.
This makes possible transparent copy of the timecode when transmuxing
and transcoding.
-timecode option for MPEG1/2 codec is also renamed to -gop_timecode. The
global ffmpeg -timecode option will set it anyway so no option change
visible for the user.
avfilter_default_filter_name() is supposed to access an AVFilterContext
struct, if used with a private struct it will cause a crash since it will
access fields which are non defined in the private struct.
The function is modelled after av_default_item_name(), and will print the
name of the instance filter if defined, otherwise the name of the filter.
This allows to show the instance name in the log, which is useful when
debugging complex filter graphs.
* qatar/master:
librtmp: return AVERROR_UNKNOWN instead of -1.
librtmp: don't abuse a variable for two unrelated things.
librtmp: add rtmp_app and rtmp_playpath private options.
bmv: add stricter checks for invalid decoded length
avpacket: fix duplicating side data.
flv: support stream text data as onTextData
Conflicts:
libavcodec/bmv.c
libavformat/flvdec.c
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The use of cyan is droped from the levels to avoid confusion
magenta/cyan/blue is used for muxer/codec/filter layer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegtsenc: Support LATM packetization for AAC
adtsenc: Don't expose the muxer internals to the rest of lavf
mpegtsenc: use AVFormatContext for AAC packetization
mpegtsenc: use AVERROR() for return codes
Conflicts:
libavformat/adts.h
libavformat/mpegtsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows creating random configurations which is useful for
testing purposes.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Conflicts:
configure
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This adds the avoption mpegts_flags and converts the existing
resend_headers option into a flag, keeping the old option as
fallback for now.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This isn't required any longer, when the mpegts muxer uses it
as a proper chained muxer.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the dependency on adts.c internals, and simplifies
adding other packetization formats.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* cus/stable:
ffplay: remove VideoPicture pix_fmt and use frame pixel format instead
ffplay: only request 4 or 6 channels from SDL, if SDL version is at least 1.2.8
ffplay: add pause audio feature in the middle of a packet
ffplay: remove VideoPicture duration field
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
http: Add the url_shutdown function for https, too
http: Simplify code by removing a local variable
http: Clear the old URLContext pointer when closed
tcp: Try enabling SO_REUSEADDR when listening
tcp: Check the return values from bind and accept
avisynth: Make sure the filename passed to avisynth is in the right code page
Conflicts:
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Without this, the compiler in theory could attempt to keep
things in float registers across the emms which would cause
bad things to happen.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes one (disabled) fate test.
Thanks-to: ubitux to pointing at the odd filter order and stereo/mono messup
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes issues with opening http urls that have authentication
or redirects, introduced in commit e999b641.
Signed-off-by: Martin Storsjö <martin@martin.st>
ra144 uses floats so bitexactness cannot be guranteed
This should fix a long standing issue with icc
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
avisynth is a non-unicode application and cannot accept UTF-8
characters. Therefore, the input filename should be converted to
the correct code page that it expects.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
fate: Fix fate-ac3-fixed-encode for pre-ssse3 x86 machines
http: Pass the proper return code of net IO operations
http: Add 'post_data', a new option which sets custom HTTP post data
lavfi: amix: check active input count before calling request_samples
vp8: move block coeff arithcoder on stack.
mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.
Conflicts:
libavformat/ac3dec.c
libavformat/mp3dec.c
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes out of global array reads.
The alternative solutions of checking the index or modifying the VLC tables
to prevent the index going outside are each about 1-2 cpu cyclces slower
per coded 4x4 block.
The alternative of padding the global tables directly is more ugly and
moving them to the context should benefit cache locality.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The old implementation, upon receiving a frame on the main
input, would request an overlay frame if necessary. This could
generate an infinite recursion, off-by-one frame mismatch and
other harmful effects, especially it the split filter is present
upgraph.
The new implementation uses the linear approach: it uses two
buffer queues for frames received out of turn and forwards
request_frame calls to the input where a frame is necessary.
Maybe someone can add a check in the second gif encoder (rgb24), because I'm not sure where it should be added.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
pcm-mpeg: improve log message wording
fate: add missing $(TARGET_PATH) to ac3-fixed-encode
fate: fix md5sum replacement on some systems
avprobe: correctly set the default formatter
lavr: add x86-optimized function for mixing 2 to 1 s16p with q8 coeffs
lavr: add x86-optimized functions for mixing 2 to 1 s16p with float coeffs
lavr: add C functions for mixing 2 to 1 channels with s16p format
avprobe: move formatter functions in the context
Conflicts:
ffprobe.c
libavcodec/pcm-mpeg.c
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents gcc from assuming that contents of it may have changed
between calls to vp56_range_get_prob(), thus preventing countless (and
unnecessary) movs. Decoding of sintel trailer goes from (avg+SG) 9.796
+/- 0.003 to 9.635 +/- 0.010.
We support every defined value for channel layout, bitrate and sample depth.
All other values are not unsupported, but reserved.
Update comments to say "are used" instead of "are known or exist".
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
We could also check the index but this would slow speed critical code
down.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the issue that since the last merge -async caused 2 aresample
filters to be inserted
users that generate funny timestamps in a filtergraph should probably
manually insert a aresample filter where they need it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On systems where the 'md5' command is used, there is a conflict
with the md5() shell function in fate-run.sh. Using the 'command'
keyword bypasses the shell function for correct behaviour.
Signed-off-by: Mans Rullgard <mans@mansr.com>
the new test doesnt work on all platforms, thus disable it until a better solution is found.
the dca2 test remains and provides partial testing until this is resolved
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avconv: extend -r to work on any input stream.
doc/avconv: expand documentation for the -s option.
avconv: don't print filters inserted by avconv in stream mappings.
avconv: merge configuration code for complex and simple filters
avconv: split configuring input filters out of configure_complex_filter
Conflicts:
configure
doc/ffmpeg.texi
ffmpeg.c
tests/ref/fate/idroq-video-encode
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f919cc7df6ab844bc12f89fe7bef4fb915a47725':
fate: fix acodec/vsynth tests for make 3.81
pcm_mpeg: fix number of consumed bytes to include the header.
avfilter: include required header file avfilter.h in video.h
x86: Avoid movs on BUTTERFLYPS when in AVX mode
x86: use new schema for ASM macros
fate: convert codec-regression.sh to makefile rules
fate: allow tests to specify unit size for psnr comparison
fate: teach videogen/rotozoom to output a single raw video stream
http: Add support for reusing the http socket for subsequent requests
http: Add support for using persistent connections
Merged-by: Michael Niedermayer <michaelni@gmx.at>
VideoPicture pixel format is set at allocation time, therefore it is not
reflecting the proper value.
Fixes files with changing pixel format in the avfilter disabled case.
Signed-off-by: Marton Balint <cus@passwd.hu>
Such files are currently not supported as the table is used at several points
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
GNU make 3.81 applies pattern rules in declaration order rather than
by stem length as in 3.82. This moves the more generic patterns above
the more specific ones such that they work with either make version.
Some of the vsynth patterns are also simplified a little.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Make writer_print_chapter_header() set the internal values *before* the
private writer callback is called, otherwise the accessed internal values
will be wrong.
Fix regression introduced in fa6cb2fdff.
Found-By: Daemon404
Make av_get_codec_tag_string() show codec tag string characters in a more
intelligible ways. For example the ascii char "@" is used as a number, so
should be displayed like "[64]" rather than as a printable character.
Apart alphanumeric chars, only the characters ' ' and '.' are used
literally in codec tags, all the other characters represent numbers.
Move the field "multiple_entries" from the JSON writer private context to
WriterContext, and rename it "multiple_sections".
This allows to factorize the code with the pending INI format patch.
There is basic support for muxing chapter information into the
Apple Quicktime format already, but there are two errors which
prevent correct detection on the player side.
1) A special apple 'text' atom needs to be included inside the
gmhd atom.
2) The *different* 'text' atom inside the 'stsd' atom needs a
proper header.
With these changes, the chapters are now picked up by Apple
players and reported correctly by tools like mediainfo and mp4chaps.
v3 Update: The stub TextSampleEntry creation is moved to where the
chapter track is created so it's now specific to this track.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
AVOptions: fix the value printed in out of range error message.
Conflicts:
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
looking at the license i cannot see why they would be incompatible and
researching this matter a bit also turned up no reasons.
If i missed something, please dont hesitate to flame me and or revert
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Introduce ff_http_do_new_request(), a new function which sends a new
HTTP request, reusing the existing connection to the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new AVOption 'multiple_requests', which indicates if we want
to use persistent connections (ie. Connection: keep-alive).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avprobe: restore pseudo-INI old style format for compatibility.
avprobe: fix formatting.
log: make colored output more colorful.
rtsp: Check for dynamic payload handlers if no static payload mapping was found
Conflicts:
Changelog
doc/ffprobe.texi
ffprobe.c
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
opt: Add av_opt_set_bin()
avconv: Display the error returned by avformat_write_header
rtpenc_chain: Return an error code instead of just a plain pointer
rtpenc_chain: Free the URLContext on failure
rtpenc: Expose the ssrc as an avoption
avprobe: display the codec profile in show_stream()
avprobe: fix function prototype
cosmetics: Fix indentation
avprobe: changelog entry
avprobe: update documentation
avprobe: provide JSON output
avprobe: output proper INI format
avprobe: improve formatting
rtmp: fix url parsing
fate: document TARGET_EXEC and its usage
Conflicts:
doc/APIchanges
doc/fate.texi
doc/ffprobe.texi
ffprobe.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some systems abuse the static payload types 35 or 36 (which
according to IANA are unassigned) for H264.
Signed-off-by: Martin Storsjö <martin@martin.st>
Introduce a new function to set binary data through AVOption,
avoiding having to convert the binary data to a string inbetween.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an URLContext is passed in, its ownership is given to this
function, and is either owned by the returned AVFormatContext
on a successful return, or freed on failure.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use lavfi-showfiltfmts for checking the format supported by the scale
filter instead. The advantage is that the scale filter may support
formats which are not supported by libswscale (namely: the pal8 format).
The new implementation is also a bit cleaner, because it doesn't depend
on the ffmpeg output.
TARGET_EXEC allows running FATE on simulators, remote targets and
memory checkers. Also document a known issue with Wine and mixed
Unix/Windows line ending.
Switching to visualization instead of exiting ffplay is a bit more tricky, so
just exit for now.
Fixes ticket 38.
Signed-off-by: Marton Balint <cus@passwd.hu>
We do this to ensure that input_get_buffer is not called from a
frame_worker_thread of a multithreaded decoder when we already freed the
filters.
Fixes occasional segfaults on video stream change.
Signed-off-by: Marton Balint <cus@passwd.hu>
This fixes occasional segfaults caused by lock request of the packet queue from
the reader thread.
Also don't allow to put frames into the queue when it's aborted, and don't try
to fill the queue with frames when it is aborted.
Signed-off-by: Marton Balint <cus@passwd.hu>
2012-05-24 23:48:51 +02:00
2078 changed files with 101594 additions and 39206 deletions
{"dsurex_mode","Dolby Surround EX Mode",OFFSET(dolby_surround_ex_mode),AV_OPT_TYPE_INT,{.dbl=AC3ENC_OPT_NONE},AC3ENC_OPT_NONE,AC3ENC_OPT_MODE_ON,AC3ENC_PARAM,"dsurex_mode"},
{"dsurex_mode","Dolby Surround EX Mode",OFFSET(dolby_surround_ex_mode),AV_OPT_TYPE_INT,{.i64=AC3ENC_OPT_NONE},AC3ENC_OPT_NONE,AC3ENC_OPT_MODE_ON,AC3ENC_PARAM,"dsurex_mode"},
@@ -687,7 +652,7 @@ static av_cold int alac_decode_init(AVCodecContext * avctx)
AVCodecff_alac_decoder={
.name="alac",
.type=AVMEDIA_TYPE_AUDIO,
.id=CODEC_ID_ALAC,
.id=AV_CODEC_ID_ALAC,
.priv_data_size=sizeof(ALACContext),
.init=alac_decode_init,
.close=alac_decode_close,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
